Search

One of the major attributes of boiled cassava roots is its ability to soften within a short period, otherwise known as mealiness. This study aimed to establish and validate standard operating procedures for assessing the mealiness of boiled cassava roots. Twenty cassava genotypes, including landrace and improved varieties, were selected for the protocol development, with an additional ten genotypes used for validation. Following cooking, the cassava roots were evaluated for hardness and work done in extrusion using a texturometer equipped with a five-blade Ottawa cell probe. The same samples were assessed for sensory texture analysis using trained panelists for parameters such as softness and chewiness. Pearson's correlation analysis revealed significant positive correlations (p < 0.01) between sensory softness and instrumental texture measurements, as well as between softness and cooking time (p < 0.01, r = 0.94), and between chewiness and cooking time (p < 0.05, r = 0.81). Validation results confirmed significant correlations (p < 0.01) between cooking time, sensory softness, and chewiness. These findings suggest that cooking time can serve as a reliable indicator, closely associated with sensory attributes, in determining the mealiness of boiled cassava roots. This approach offers a practical, mid-throughput method for assessing cassava root mealiness, with implications for breeding improved varieties, farmers adoption, and consumer acceptance. [ABSTRACT FROM AUTHOR]

This article presents a case that highlights the importance of excluding underlying intracranial pathology in a patient presenting with severe headache and positive xanthochromia. This case report demonstrated that false-positive xanthochromia without subarachnoid haemorrhage (SAH) is possible in acute bacterial meningitis when there is a combination of traumatic lumbar puncture and either hyperbilirubinaemia or raised cerebrospinal fluids (CSF) protein. [ABSTRACT FROM AUTHOR]

Background: Food quality traits related to the genetics of yam influence the acceptability for its consumption. This study aimed at identifying genetic factors underlying sensory and textural quality attributes of boiled and pounded yam, the two dominant food products from white Guinea yam., Results: A genome-wide association study (GWAS) of a panel of 184 genotypes derived from five multi-parent crosses population was conducted. The panel was phenotyped for the qualities of boiled and pounded yam using sensory quality and instrument-based textural profile assays. The genotypes displayed significant variation for most of the attributes. Population differentiation and structure analysis using principal component analysis (PCA) and population structure-based Bayesian information criteria revealed the presence of four well-defined clusters. The GWAS results from a multi-random mixed linear model with kinship and PCA used as covariate identified 13 single-nucleotide polymorphic (SNP) markers significantly associated with the boiled and pounded yam food qualities. The associated SNP markers explained 7.51-13.04% of the total phenotypic variance with a limit of detection exceeding 4., Conclusion: Regions on chromosomes 7 and 15 were found to be associated with boiled and pounded yam quality attributes from sensory and instrument-based assays. Gene annotation analysis for the regions of associated SNPs revealed co-localization of several known putative genes involved in glucose export, hydrolysis and glycerol metabolism. Our study is one of the first reports of genetic factors underlying the boiled and pounded yam food quality to pave the way for marker-assisted selection in white Guinea yam. © 2023 Society of Chemical Industry., (© 2023 Society of Chemical Industry.)

Background: Nigeria and Cameroon are multi-ethnic countries with diverse preferences for food characteristics. The present study aimed to inform cassava breeders on consumer-prioritized eba quality traits. Consumer testing was carried out using the triadic comparison of technologies (tricot). Diverse consumers in villages, towns and cities evaluated the overall acceptability of eba made from different cassava genotypes. Data from both countries were combined and linked to laboratory analyses of eba and the gari used to make it., Results: There is a strong preference for eba with higher cohesiveness and eba from gari with higher brightness and especially in Cameroon, with lower redness and yellowness. Relatively higher eba hardness and springiness values are preferred in the Nigerian locations, whereas lower values are preferred in Cameroon. Trends for solubility and swelling power of the gari differ between the two countries. The study also reveals that the older improved cassava genotype TMS30572 is a benchmark genotype with superior eba characteristics across different regions in Nigeria, whereas the recently released variety Game changer performs very well in Cameroon. In both locations, the recently released genotypes Obansanjo-2 and improved variety TM14F1278P0003 have good stability and overall acceptability for eba characteristics., Conclusion: The wide acceptance of a single genotype across diverse geographical and cultural conditions in Nigeria, as well as three acceptable new improved varieties in both locations, indicates that consumers' preferences are surprisingly homogeneous for eba. This would enhance breeding efforts to develop varieties with wider acceptability and expand potential target areas for released varieties. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Background: Boiled yam key quality attributes typical for West African consumers are that it is crumbly, easy to break and has a sweet taste. New yam varieties are being developed but high- or medium-throughput tools to assess the required quality traits and their range of acceptance are limited. This study assessed the acceptance thresholds of these quality attributes and established predictive models for screening yam varieties that meet the required consumer preferences., Results: Overall liking was associated with sweet taste, crumbliness and easiness to break (r-values 0.502, 0.291 and -0.087, respectively). These parameters and selected biophysical parameters highly discriminated the boiled yam varieties. Crumbly texture and easiness to break were well predicted by penetration force and dry matter, whereas sweet taste were well predicted by dry matter and sugar intensity. A high crumbliness and sweet taste are preferred (sensory scores above 6.19 and 6.22 for crumbly and sweet taste, respectively, on a 10 cm unstructured line scale), while a too high easiness to break is disliked (sensory scores ranging from 4.72 to 7.62). Desirable biophysical targets were between 5.1 and 7.1 N for penetration force, dry matter around 39% and sugar intensity below 3.62 g 100 g -1 . Some improved varieties fulfilled the acceptable thresholds, and screening was improved through deviation from the optimum., Conclusion: Acceptance thresholds and deviation from optimum for boiled yam assessed through the instrumental measurements are promising tools for yam breeders. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Background: Assessment of the key preferred quality traits in pounded yam, a popularly consumed yam food product in West Africa, is often done through sensory evaluation. Such assessment is time-consuming and results may be biased. Therefore, there is a need to develop objective, high-throughput methods to predict the quality of consumer-preferred traits in pounded yam. This study focused on how key quality traits in pounded yam proposed to yam breeders were determined, measured by biophysical and biochemical methods, in order to shorten the breeding selection cycle through adoption of these methods by breeders., Results: Consumer tests and sensory quantitative descriptive analysis (QDA) validated that preferred priority quality traits in pounded yam were related to textural quality (smooth, stretchable, moldable, slightly sticky and moderately hard) and color (white, cream or light yellow). There were significant correlations between sensory textural quality attributes cohesiveness/moldability, hardness, and adhesiveness/stickiness, with textural quality measurements from instrumental texture profile analysis (TPA). Color measurement parameters (L*, a*, and b*) with chromameter agreed with that of sensory evaluation and can replace the sensory panel approach. The smoothness (R 2  = 1.00), stickiness (R 2  = 1.00), stretchability (R 2  = 1.00), hardness (R 2  = 0.99), and moldability (R 2  = 0.53) of pounded yam samples can be predicted by the starch, amylose, and protein contents of yam tubers estimated by near-infrared spectroscopy., Conclusion: TPA and Hunter colorimeter can be used as medium-high throughput methods to evaluate the textural quality and color of pounded yam in place of the sensory panelists. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Roots, tubers and bananas (RTBs) contribute immensely to food security and livelihoods in sub-Saharan Africa, Asia and Latin America. The adoption of RTB genotypes in these regions relies on the interplay among agronomic traits, ease of processing and consumer preference. In breeding RTBs, until recently little attention was accorded key textural traits preferred by consumers. Moreover, a lack of standard, discriminant, repeatable protocols that can be used to measure the textural traits deter linkages between breeding better RTB genotypes and end user/consumer preferences. RTB products texture - that is, behaviour of RTB food products under unique deformations, such as disintegration and the flow of a food under force - is a critical component of these preferences. The preferences consumers have for certain product texture can be evaluated from expert sensory panel and consumer surveys, which are useful tools in setting thresholds for textural traits, and inform breeders on what to improve in the quality of RTBs. Textural characterization of RTBs under standard operating procedures (SOPs) is important in ensuring the standardization of texture measurement conditions, predictability of textural quality of RTBs, and ultimately definition of RTB food product profiles. This paper reviews current SOPs for the textural characterization of RTBs, including their various associated methods, parameters, challenges and merits. Case studies of texture characterized during development of SOPs and evaluation of texture of RTB populations are discussed, together with insights into key textural attributes and correlations between instrumental, sensory and consumer assessment of texture unique to various RTB food products. Hardness was considered a universal key textural attribute to discriminate RTBs. The review should provide adequate insight into texture of RTB food products and critical factors in their measurement. It aims to promote inclusion of texture in breeding pipelines by investigating which textural traits are prioritized by consumers, particularly since the inclusion of textural traits has recently gained prominence by breeders in improving RTBs. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Background: Gari (especially in Nigeria) is an important West African food product made from cassava. It is an affordable, precooked, dry, easy to prepare and store food product. Eba is a stiff dough produced by reconstituting gari in hot water. Gari and eba quality is an important driver of varietal acceptance by farmers, processors, and consumers., Results: This study characterized the genetic variability, heritability, and correlations among quality-related traits of fresh roots, gari, and eba. Thirty-three diverse genotypes, including landraces and released and advanced breeding genotypes, were used in this study. In total, 40 traits categorized into fresh root quality, colour, functional, and texture properties trait groups were assessed. We observed broad phenotypic variability among the genotypes used in this study. Dry matter content had a positive (P < 0.05) correlation with gari%, bulk density and a negative correlation with eba hardness and gumminess. Broad-sense heritability across all environments varied considerably among the different trait groups: 62% to 79% for fresh root quality, 0% to 96% for colour, 0% to 79% for functional and 0% to 57% for texture properties., Conclusions: The stable broad-sense heritability found for gari%, gari and eba colour, bulk density, swelling index, and hardness measured using instrumental texture profile analysis coupled with sufficient variability in the population indicate good potential for genetic improvement of these traits through recurrent selection. Also, it is possible to genetically improve gari%, bulk density, and swelling power by simultaneously improving the dry matter content of fresh roots. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Background: Gari and eba, forms of cassava semolina, are mainly consumed in Nigeria and other West African countries. This study aimed to define the critical quality traits of gari and eba, to measure their heritability, to define medium and high throughput instrumental methods for use by breeders, and to link the traits with consumer preferences. The definition of a food product's profiles, including its biophysical, sensory, and textural qualities, and the identification of the characteristics that determine its acceptability, are important if new genotypes are to be adopted successfully., Results: Eighty cassava genotypes and varieties (three different sets) from the International Institute of Tropical Agriculture (IITA) research farm were used for the study. Participatory processing and consumer testing data on different types of gari and eba products were integrated to prioritize the traits preferred by processors and consumers. The color, sensory, and instrumental textural properties of these products were determined using standard analytical methods, and standard operating protocols (SOPs) developed by the RTBfoods project (Breeding Roots, Tubers, and Banana Products for End-user Preferences, https://rtbfoods.cirad.fr). There were significant (P < 0.05) correlations between instrumental hardness and sensory hardness and between adhesiveness and sensory moldability. Principal component analysis showed broad discrimination amongst the cassava genotypes and the association of the genotypes concerning the color and textural properties., Conclusions: The color properties of gari and eba, together with instrumental measures of hardness and cohesiveness, are important quantitative discriminants of cassava genotypes. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Cassava (Manihot esculenta Crantz) is an essential stable food crop in Sub-Saharan Africa commonly consumed amongst the low-income communities in Africa. Though cassava roots and leaf have vast economic and commercial benefits, it produces cyanogenic glycosides, which are toxic and most often responsible for the bitter taste of some cassava cultivars. The study evaluates the cassava roots and leaves' cyanogenic potential and dry matter content of the Genetic Gain Assessment trial grown in a different environment. It establishes the association between the cyanogenic potential (CNP) and the roots and leaves dry matter (DM). Genetic Gain Assessment (GGA) cassava genotypes (N = 400) selected for the Uniform Yield Trial (UYT) breeding stage were planted under IVS (Dry season in Inland Valley Hydromorphic area) and Upland (rain-fed conditions) in two locations of IITA Research Farms, namely; Ibadan (IVS and Upland) and Mokwa (Upland) in Nigeria. The CNP content of cassava leaves in IVS, Mokwa, and Upland ranged from 3.39 to 272.16 mg/100 g, 4.28 to 228.72 mg/100 g, and 13.13 to 127.39 mg/100 g, respectively. However, the respective CNP range in root samples across IVS, Mokwa, and Upland was 0.76-76.31 mg/100 g, 0.94-136.53 mg/100 g, and 2.37-47.11 mg/100 g. Also, the mean ± SD of DM content of leaves were 27.97 ± 3.01%, 28.81 ± 4.01%, and 13.65 ± 3.69%, respectively, in IVS, Mokwa, and Upland, while the root samples had mean ± SD of DM content of 38.09 ± 4.80%, 32.69 ± ,5.93% and 24.63 ± 5.07% respectively. Furthermore, location and genotype had a highly significant effect (p < 0.001) on the CNP and DM of roots and leaves. Also, linear regressions were established between CNP and DM of root and leaf with regression equation; DM-Root = 1.1999*DM-Leaf (r = 0.956) and CNP-Root = 0.29006*CNP-Leaf (r = 0.54). The relationship between the DM (root and leaf) and CNP (root and leaf) could serve as a valuable "inter-prediction" tool for these parameters., (© 2023. Springer Nature Limited.)

Gari is a creamy, granular flour obtained from roasting fermented cassava mash. Its preparation involves several unit operations, including fermentation, which is essential in gari production. Fermentation brings about specific biochemical changes in cassava starch due to the actions of lactic acid bacteria. Consequently, it gives rise to organic acids and a significant reduction in the pH. Consumer preferences for gari are influenced by these changes and impact specific functional characteristics, which are often linked to cassava genotypes. Measurement of these functional characteristics is time-consuming and expensive. Therefore, this study aimed to develop high-throughput and less expensive prediction models for water absorption capacity, swelling power, bulk density, and dispersibility using Near-Infrared Reflectance Spectroscopy (NIRS). Gari was produced from 63 cassava genotypes using the standard method developed in the RTB foods project. The prediction model was developed by dividing the gari samples into two sets of 48 samples for calibration and 15 samples as the validation set. The gari samples were transferred into a ring cell cup and scanned on the NIRS machine within the Vis-NIR range of 400-2,498 nm wavelength, though only the NIR range of 800-2,400 nm was used to build the model. Calibration models were developed using partial least regression algorithms after spectra pre-processing. Also, the gari samples were analysed in the laboratory for their functional properties to generate reference data. Results showed an excellent coefficient of determination in calibrations (R 2 Cal ) of 0.99 , 0.97 , 0.97 , and 0.89 for bulk density, swelling power, dispersibility, and water absorption capacity, respectively. Also, the performances of the prediction models were tested using an independent set of 15 gari samples. A good prediction coefficient (R 2 pred) and low standard error of prediction (SEP) was obtained as follows: Bulk density ( 0.98 ), Swelling power ( 0.93 ), WAC ( 0.68 ), Dispersibility ( 0.65 ), and solubility index ( 0.62 ), respectively. Therefore, NIRS prediction models in this study could provide a rapid screening tool for cassava breeding programs and food scientists to determine the food quality of cassava granular products (Gari)., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Adesokan, Alamu, Fawole and Maziya-Dixon.)

Specific biochemical properties and textural attributes determine the final quality and acceptability of yam food products. This study assessed the flour and cooking qualities (boiled yam) of sixteen elite white yam genotypes ( D. rotundata ) grown in three locations. Fresh yam samples were cut into regular-shaped pieces and boiled using the standard procedure. Sub-samples were oven-dried at 65 °C for 72 h and milled to flour. The biochemical profiling for the yam flour showed, on average, 61.35 ± 5.15% starch, 5.35 ± 0.15% sugar, 1.55 ± 0.24% crude fiber, 1.91 ± 0.31% ash, 5.65 ± 0.66% protein, 0.33 ± 0.02% fat and 34.87 ± 1.94% amylose content. The boiled yam's water absorption and cooking time ranged from 0.35 to 5.17% and 7.00-18 min, with an average of 2.74% and 10.64 min, respectively. The hardness of boiled yam from the sensory assay correlated positively with the hardness of instrumental texture analysis (p < 0.001, r = 0.47). In contrast, the hardness of instrumental texture had a significant negative correlation with the chewiness of sensory profile analysis (p < 0.05, r = 0.37). Likewise, water absorption correlated positively and significantly (p < 0.05, r = 0.43) with the chewiness of the sensory analysis. The study shows that the sensory attributes that determine the acceptability of boiled yam could be determined using instrumental measurements to save time and cost., Competing Interests: The authors declare no conflict of interest., (© 2022 The Author(s).)

The cassava starch market is promising in sub-Saharan Africa and increasing rapidly due to the numerous uses of starch in food industries. More accurate, high-throughput, and cost-effective phenotyping approaches could hasten the development of cassava varieties with high starch content to meet the growing market demand. This study investigated the effectiveness of a pocket-sized SCiO™ molecular sensor (SCiO) (740-1070 nm) to predict starch content in freshly ground cassava roots. A set of 344 unique genotypes from 11 field trials were evaluated. The predictive ability of individual trials was compared using partial least squares regression (PLSR). The 11 trials were aggregated to capture more variability, and the performance of the combined data was evaluated using two additional algorithms, random forest (RF) and support vector machine (SVM). The effect of pretreatment on model performance was examined. The predictive ability of SCiO was compared to that of two commercially available near-infrared (NIR) spectrometers, the portable ASD QualitySpec ® Trek (QST) (350-2500 nm) and the benchtop FOSS XDS Rapid Content™ Analyzer (BT) (400-2490 nm). The heritability of NIR spectra was investigated, and important spectral wavelengths were identified. Model performance varied across trials and was related to the amount of genetic diversity captured in the trial. Regardless of the chemometric approach, a satisfactory and consistent estimate of starch content was obtained across pretreatments with the SCiO (correlation between the predicted and the observed test set, ( R 2 P ): 0.84-0.90; ratio of performance deviation (RPD): 2.49-3.11, ratio of performance to interquartile distance (RPIQ): 3.24-4.08, concordance correlation coefficient (CCC): 0.91-0.94). While PLSR and SVM showed comparable prediction abilities, the RF model yielded the lowest performance. The heritability of the 331 NIRS spectra varied across trials and spectral regions but was highest ( H 2 > 0.5) between 871-1070 nm in most trials. Important wavelengths corresponding to absorption bands associated with starch and water were identified from 815 to 980 nm. Despite its limited spectral range, SCiO provided satisfactory prediction, as did BT, whereas QST showed less optimal calibration models. The SCiO spectrometer may be a cost-effective solution for phenotyping the starch content of fresh roots in resource-limited cassava breeding programs., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Nkouaya Mbanjo, Hershberger, Peteti, Agbona, Ikpan, Ogunpaimo, Kayondo, Abioye, Nafiu, Alamu, Adesokan, Maziya-Dixon, Parkes, Kulakow, Gore, Egesi and Rabbi.)

Yellow-fleshed cassava root (YFCR) is processed into traditional products that may influence its bioactivities. In this study, the antioxidant and anti-hyperglycaemic activities of three traditional products ( lafun, fufu and gari ) from five genotypes (IITA-TMS-IBA070337, 182961, 182962, 182986, 183044) of YFCR were evaluated. The YFCR genotypes were grown at the International Institute of Tropical Agriculture (IITA) research field, Ibadan. The bioactive constituents (total carotenoids, total phenolics, tannins and total flavonoids), antioxidant [2,2-azinobis (3-ethyl-benzothiazoline-6-sulfonic acid) radical cation (ABTS •+ ) and 1,1-diphenyl-2- picrylhydrazyl radical (DPPH • ) scavenging capacities, and reducing power], and starch-digesting enzymes (α-amylase and α-glucosidase) inhibitory activities of the products were determined using standard laboratory methods. The glucose response of the products was assessed in human subjects. The concentrations of the bioactive constituents of the products from different genotypes varied significantly ( p < 0.05). The ABTS •+ and DPPH • scavenging capacities and the reducing power of the products also differed significantly ( p < 0.05), such that the lafun from IITA-TMS-IBA182962, IITA-TMS-IBA070337 and IITA-TMS-IBA070337 had the strongest ABTS •+ and DPPH • scavenging capacities, and reducing power, respectively. The α-amylase and α-glucosidase inhibitory activities of the three products differed significantly ( p < 0.05), with the lafun from IITA-TMS-IBA070337 and IITA-TMS-IBA07033 having the strongest α-amylase and α-glucosidase inhibitory activity, respectively. Also, the lafun from IITA-TMS-182986 had the least glucose response, while the fufu from IITA-TMS-IBA070337 had the highest glucose response. Overall, the lafun from different genotypes of YFCR had the most potent antioxidant and starch-digesting enzymes inhibitory activities and the least glucose responses. Hence, lafun may be a promising dietary intervention targeting oxidative stress, hyperglycaemia, and their resultant type 2 diabetes., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Kareem, Irondi, Alamu, Ajani, Abass, Adesokan, Parkes and Maziya-Dixon.)

The accurate quantification of amino acids in maize breeding programs is challenging due to the high cost of analysis using High-Performance Liquid Chromatography (HPLC) and other conventional methods. Using the Near-Infrared Spectroscopic (NIRS) method in breeding to screen many genotypes has proven to be a fast, cost-effective, and non-destructive method. Thus, this study aimed to develop and apply the NIRS prediction models for quantifying amino acids in biofortified quality protein maize (QPM). Sixty-three (63) QPM maize genotypes were used as the calibration set, and another twenty (20) genotypes were used as the validation set. The microwave hydrolysis system coupled with post-column derivatization with 6-amino-quinoline-succinimidyl-carbamate as the derivatization reagent and the HPLC method were used to generate the reference data set used for the calibration development. The calibration models were developed for essential and non-essential amino acids using WINSI Foss software. Good coefficients of determination in calibration (R 2 cal ) of 0.91, 0.93, 0.93, and 0.91 and low standard errors in calibrations (SEC) of 0.62, 0.71, 0.26, and 1.75 were obtained for glutamic acids, alanine, proline, and leucine, respectively, while aspartic acids, serine, glycine, arginine, tyrosine, valines, and phenylalanine had fairly good R 2 Cal values of 0.86, 0.71, 0.81, 0.78, 0.68, 0.79, and 0.75. In contrast, poor (R 2 cal ) was obtained for histidine (0.07), cystine (0.09), methionine (0.09), lysine (0.20), threonine (0.51), and isoleucine (0.09), respectively. The models' prediction performances (R 2 pred ) and standard error of prediction (SEP) were reasonably good for certain amino acids such as aspartic acid (0.90), glycine (0.80), arginine (0.94), alanine (0.90), proline (0.80), tyrosine (0.83), valine (0.82), leucine (0.90), and phenylalanine (0.88) with SEP values of 0.24, 0.39,0.24, 0.93, 0.47,0.34, 0.78, 2.20, and 0.77, respectively. However, certain amino acids had their R 2 pred below 0.50, which could be improved to become useful for screening purposes for those amino acids. Further work is recommended by including a training set representing the sample population's variance to improve the model's performance.

Knowledge is scarce on the drivers of textural characteristics of cooked dough prepared from gari ( eba ). To address this need, quality attributes of backslopped fermented gari (BFG) were correlated with the sensory texture profile analysis (STPA) and instrumental texture profile analysis (ITPA) of the eba produced from six cassava varieties. The results showed that a significant and negative correlation exists between the STPA mouldability of the eba and the sugar ( p  < .05, r = -0.83) and amylose ( p  < .05, r = -0.86) contents of the BFG. The STPA stretchability of the eba had a significant negative correlation with the bulk density ( p  < .05, r = -0.83) and a significant positive correlation with the setback viscosity ( p  < .01, r  = 0.92) of the BFG. A significant and negative correlation exists between the STPA stickiness of the eba and the amylose ( p  < .05, r = -0.84) contents of the BFG. The ITPA adhesiveness of the eba was significant and negatively correlated with the solubility index ( p  < .05, r = -0.89) and the ash content ( p  < .05, r = -0.87) of the BFG. The correlation between the ITPA stretchability of the eba and the peak ( p  < .05, r = 0.83) and breakdown ( p  < .05, r = 0.88) viscosities of the BFG was significant and positive, while a significant negative correlation ( p  < .05, r = -0.83) exist between the ITPA stretchability of the eba and the starch content of the BFG. The information provided in this study may assist the breeders in developing varieties with good textural attributes for eba., Practical Applications: This study depicts the relationship between the quality attributes of backslopped fermented gari (BFG) and the sensory and instrumental texture profile of the cooked dough (eba). Both the sensory and the instrumental texture attributes of the eba have correlation with the quality attributes of the BFG. Apart from providing information on the drivers of the textural characteristics of eba, this study may also assist the breeders in developing varieties with good textural attributes for eba., Competing Interests: The author declares that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported., (© 2021 International Institute of Tropical Agriculture (IITA). Journal of Food Processing and Preservation published by Wiley Periodicals LLC.)

The study evaluates the effects of genotype, maturity, and growing location on the functional and pasting properties of freshly harvested orange maize hybrids and open-pollinated varieties (OPVs). Eight fresh orange maize hybrid and eight fresh maize OPV, including the control, were harvested at three stages: 20, 27, and 34 days after planting (DAP). The freshly harvested maize samples were lyophilized and characterized for the pasting and functional properties using standard laboratory methods. The peak viscosity, final viscosity, and swelling power of the OPVs increased between 20 and 27 DAP. Additionally, the water absorption capacity increased between 20 and 27 DAP for the maize hybrids, with a decreasing trend between 27 and 34 DAP. However, genotypes 2, from the orange maize hybrid, and 5, amongst the OPV, were outstanding with the highest peak viscosities, indicating good final product quality. The combined ANOVA for the fresh orange maize hybrid and OPV showed a highly significant effect ( p ≤ 0.01 and p ≤ 0.001) for the maturity and location on the pasting and functional properties except for the pasting temperature, final viscosity, and pasting time which showed no significant effect. In contrast, the location by genotypes by maturity interactions had no significant effects on the pasting and functional properties of the fresh maize hybrid and the orange OPV except only for the setback, which was highly significant at p ≤ 0.001. Nutritionists, food scientists, and maize breeders could use the information from this study to select the best maize genotypes at the appropriate harvesting period suitable for the production of the preferred maize-based products of consumers., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Alamu, Maziya-Dixon, Menkir, Adesokan and Olaofe.)

Within communities in Osun and Imo States of Nigeria, farmer-processors grew and processed a diverse set of improved and landrace cassava varieties into the locally popular foods, gari , eba and fufu . Local and 15 main varieties were grown in a 'mother and baby trials' design in each state. Mother trials with three replications were processed by farmer-processors renown in their community for their processing skills. Baby trials were managed and processed by other farmer-processors. The objective was to identify food quality criteria to inform demand-led breeding to benefit users, especially women, given their key roles in processing. Farmer-processors evaluated the overall quality of fresh roots and derived food products through pairwise comparisons. Improved varieties had higher fresh and dry root yield. Overall, landraces ranked first for quality of gari and eba, but several improved varieties were also appreciated for good quality. Landraces in Osun had higher gari yield and a higher swelling power compared to improved varieties. Colour (browning), bulk density, swelling power, solubility and water absorption capacity were the criteria most related to food product ranking by farmer-processors. Evaluation of varieties under farmer-processors' conditions is crucial for providing guidance to breeders on critical selection criteria., Competing Interests: The authors declare no conflict of interest in this work., (© 2020 The Authors. International Journal of Food Science & Technology published by John Wiley & Sons Ltd on behalf of Institute of Food, Science and Technology (IFSTTF).)

The review aimed to identify the different high-throughput phenotyping (HTP) techniques that used for quality evaluation in cassava and yam breeding programmes, and this has provided insights towards the development of metrics and their application in cassava and yam improvements. A systematic review of the published research articles involved the use of NIRS in analysing the quality traits of cassava and yam was carried out, and Scopus, Science Direct, Web of Sciences and Google Scholar were searched. The results of the review established that NIRS could be used in understanding the chemical constituents (carbohydrate, protein, vitamins, minerals, carotenoids, moisture, starch, etc.) for high-throughput phenotyping. This study provides preliminary evidence of the application of NIRS as an efficient and affordable procedure for HTP. However, the feasibility of using mid-infrared spectroscopy (MIRS) and hyperspectral imaging (HSI) in combination with the NIRS could be further studied for quality traits phenotyping., Competing Interests: The authors declare no conflict of interest in this work., (© 2020 The Authors. International Journal of Food Science & Technology published by John Wiley & Sons Ltd on behalf of Institute of Food, Science and Technology (IFSTTF).)

Bananas are important staples in tropical and sub-tropical regions and their potential as a source of provitamin A has recently attracted attention for biofortification. A collection of 189 banana genotypes (AAB-plantains, M. acuminata cultivars and bred hybrids) was screened to determine variability in fruit pulp provitamin A carotenoid (pVAC) content using high performance liquid chromatography. Total carotenoid content in tested genotypes varied from 1.45 µg/g for hybrid 25447-S7 R2P8 to 36.21 µg/g for M. acuminata cultivar ITC.0601 Hung Tu with a mean of 8.00 µg/g fresh weight. Predominant carotenoids identified were α-carotene (38.67%), trans -β-carotene (22.08%), lutein (22.08%), 13- cis -β-carotene (14.45%) and 9- cis -β-carotene (2.92%), indicating that about 78% of the carotenoids in bananas are pVAC. High pVAC genotypes were identified for integration into biofortification strategies to combat vitamin A deficiency in developing countries.