Search

This paper analyzes the performance of a cooperative relaying non-orthogonal multiple access (NOMA) network over Fisher-Snedecor F composite fading channels. Specifically, one base station (BS) is assumed to communicate with two receiving mobile users with one acting also as a decode-and-forward (DF) relay. To highlight the achievable performance gains of the NOMA scheme, conventional relaying with orthogonal multiple access (OMA) is also analyzed. For the two systems under consideration, we derive novel exact closed-form expressions for the ergodic capacity along with the corresponding asymptotic representations. The derived expressions are then used to assess the influence of various system parameters, including the fading and shadowing parameters, on the performance of both the NOMA and OMA systems. Monte-Carlo simulation are provided throughout to verify the accuracy of our analysis. Results reveal that the NOMA system can considerably outperform the OMA approach when the power allocation factor is carefully selected. It is also shown that as the fading and/or shadowing parameters are increased, the ergodic capacity performance enhances., Comment: 12 pages, 7 figures

This paper presents a comprehensive performance analysis of an integrated indoor power line communication (PLC)/visible light communication (VLC) system with the presence of a decode-and-forward (DF) relay. The existing indoor power line networks are used as the backbone for VLCs. The performance of the proposed system is evaluated in terms of the average capacity and the outage probability. A new unified mathematical method is developed for the PLC/VLC system and analytical expressions for the aforementioned performance metrics are derived. Monte Carlo simulations are provided throughout the paper to verify the correctness of the analysis. The results reveal that the performance of the proposed system deteriorates with increasing the end-to-end distance and improves with increasing the relay transmit power. It is also shown that the outage probability of the system under consideration is negatively affected by the vertical distance to user plane., Comment: arXiv admin note: text overlap with arXiv:1807.10169

This paper analyzes the performance of a full-duplex decode-and-forward relaying network over the generalized \kappa-\mu fading channel. The relay is energy-constrained and relies entirely on harvesting the power signal transmitted by the source based on the time-switching relaying protocol. A unified analytical expression for the ergodic outage probability is derived for the system under consideration. This is then used to derive closed-form analytical expressions for three special cases of the \kappa-\mu fading model, namely, Nakagami-m, Rice and Rayleigh. Monte Carlo simulations are provided throughout to verify the correctness of our analysis.

Relaying over power line communication (PLC) channels can considerably enhance the performance and reliability of PLC systems. This paper is dedicated to study and analyze the energy efficiency of multi-hop cooperative relaying PLC systems. Incremental decode-and-forward (IDF) relying is exploited to reduce the transmit power consumption. The PLC channel is assumed to experience log-normal fading with impulsive noise. The performances of single-hop and conventional DF relaying systems are also analyzed in terms of outage probability and energy efficiency for which analytical expressions are derived. Results show that using more relays can improve the outage probability performance; however, this is achieved at the expense of increased power consumption due to the increased static power of the relays, especially when the total source-to-destination distance is relatively small. Results also demonstrate that the IDF PLC system has better energy efficiency performance compared to the other schemes.

Reliable data transmissions and offering better mobility to the end user can be achieved by integrating different communication systems. In this paper, we investigate the performance of a cascaded indoor power line communication (PLC)/visible light communication (VLC) system with the presence of an amplify-and-forward (AF) relay. Using the pre-installed infrastructure of electricity wiring networks gives the advantage to use PLC as a backbone for VLCs. The performance of the proposed hybrid system is discussed in terms of the average capacity. A mathematical method is developed for this network to formulate the capacity by exploiting the statistical properties of both the PLC and VLC channels. The derived analytical expressions are validated by Monte Carlo simulations. The results showed that there is a considerable improvement in the performance of the hybrid system as the relay gain increases whereas it deteriorates with increasing the end-to-end distance. A comparison between the performance of a parallel hybrid/PLC and hybrid systems is also provided. It is found that the hybrid/PLC system outperforms the hybrid one. However, the user mobility offered by the latter system remains the main advantage over the former approach., Comment: arXiv admin note: text overlap with arXiv:1806.10013

High amplitude impulsive noise (IN) occurrence over power line channels severely degrades the performance of Orthogonal Frequency Division Multiplexing (OFDM)systems. One of the simplest methods to reduce IN is to precede the OFDM demodulator with a blanking non-linearity processor. In this respect, Selective Mapping (SLM) applied to an OFDM signal before the transmitter does not only reduce Peak-to-Average Power Ratio (PAPR) but also increases the resulting Signal-to-Noise Ratio (SNR) when blanking nonlinearity is applied at the receiver. This paper highlights another advantage of SLM based IN reduction, which is the reduced dependency on threshold used for blanking nonlinearity. The simulation results show that the optimal threshold to achieve maximum SNR is found to be constant for phase vectors greater than or equal to 64 in the SLM scheme. If the optimized threshold calculation method is used, the output SNR with SLM OFDM will result in SNR gains of up to 8.6dB compared to the unmodified system, i.e. without implementing SLM. Moreover, by using SLM, we not only get the advantage of low peak power, but also the need to calculate optimized threshold is eliminated, thereby reducing the additional computation., Comment: Accepted in 11th IEEE/IET International Symposium on Communication Systems, Networks, and Digital Signal Processing. Consists of 6 pages and 5 figures

Energy-harvesting (EH) and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels, which represent outdoor environments. In contrast, this paper is dedicated to analyze the performance of dual-hop relaying systems with EH over indoor channels characterized by log-normal fading. Both half-duplex (HD) and full-duplex (FD) relaying mechanisms are studied in this work with decode-and-forward (DF) and amplify-and-forward (AF) relaying protocols. In addition, three EH schemes are investigated, namely, time switching relaying, power splitting relaying and ideal relaying receiver which serves as a lower bound. The system performance is evaluated in terms of the ergodic outage probability for which we derive accurate analytical expressions. Monte Carlo simulations are provided throughout to validate the accuracy of our analysis. Results reveal that, in both HD and FD scenarios, AF relaying performs only slightly worse than DF relaying which can make the former a more efficient solution when the processing energy cost at the DF relay is taken into account. It is also shown that FD relaying systems can generally outperform HD relaying schemes as long as the loop-back interference in FD is relatively small. Furthermore, increasing the variance of the log-normal channel has shown to deteriorate the performance in all the relaying and EH protocols considered., Comment: arXiv admin note: text overlap with arXiv:1806.09380

Most of the recent power line communication (PLC) systems and standards, both narrow-band and broadband, are based on orthogonal frequency-division multiplexing (OFDM). This multiplexing scheme however suffers from the high peak-to-average power ratio (PAPR) which can considerably impact the energy efficiency, size and cost of PLC modems as well as cause electromagnetic compatibility (EMC) issues. This paper investigates the performance of vector OFDM (VOFDM), which has inherently better PAPR properties, over non-Gaussian broadband PLC channels equipped with two nonlinear preprocessors at the receiver. In addition, the low PAPR property of the VOFDM system is exploited to further enhance the efficiency of the nonlinear preprocessors. The achievable gains are studied in terms of the complementary cumulative distribution function of the PAPR, probability of noise detection error and the signal-to-noise ratio at the output of the nonlinear preprocessors. For comparison's sake, the performance of conventional OFDM systems is also presented throughout the paper. Results reveal that the proposed system is able to provide up to 2 dB saving in the transmit power relative to the conventional OFDM under same system conditions, which eventually also translates into a system that is more resilient to EMC limits, reduced cost and size of PLC modems. It is also shown that the achievable gains become more significant as the vector block (VB) size of the VOFDM system is increased.

The high attenuation which increases as frequency increases in power line communication systems (PLC) makes achieving and sustaining high data rates over such channels a challenging task. In most communication systems, relays are normally deployed to overcome the effect of signal attenuation and to achieve reliable transmissions between users. Amplifyand- forward (AF) and decode-and-forward (DF) relays are often used. In contrast to the existing work on this topic which advocate utilizing relays either between PLC links or between wireless links, the authors of this paper focus on using AF relaying for in-home PLC and wireless systems where one PLC user wants to share data with one wireless user which has no access to the PLC network. We refer to this system as the Hybrid approach. A mathematical method is developed for this network to formulate the capacity of the system by exploiting the statistical properties of both PLC and wireless channels. Monte Carlo simulations are used throughout this paper to validate the analytical results. The impact of several system parameters is investigated in this paper. For the sake of comparison, we also provide the performance analysis and results for a PLC only network. The results showed that the performance of the hybrid system enhances as we increase the relay gain and deteriorates as the end-to-end distance increases. It is also found that the PLC only scheme may outperform the hybrid one if the relay gain is relatively small; however, the user mobility offered by the hybrid system remains the main advantage over the PLC only system.

Energy-harvesting and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels which represents outdoor environments. Unlike these studies, in this paper we analyze the performance of wireless power transfer in two-hop decode-and-forward (DF) cooperative relaying systems in indoor channels characterized by log-normal fading. Three well-known energy-harvesting protocols are considered in our evaluations: a) time-switching relaying (TSR), b) power-splitting relaying (PSR) and c) ideal relaying receiver (IRR). The performance is evaluated in terms of the ergodic outage probability for which we derive accurate analytical expressions for the three systems under consideration. Results reveal that careful selection of the energy-harvesting time and power-splitting factors in the TSR- and PSR-based system are important to optimize performance. It is also presented that the optimized PSR system has near-ideal performance and that increasing the source transmit power and/or the energy-harvester efficiency can further improve performance.

In this paper, we consider a two-hop amplify-and-forward (AF) relaying system, where the relay node is energy-constrained and harvests energy from the source node. In the literature, there are three main energy-harvesting (EH) protocols, namely, time-switching relaying (TSR), power-splitting (PS) relaying (PSR) and ideal relaying receiver (IRR). Unlike the existing studies, in this paper, we consider $\alpha$-$\mu$ fading channels. In this respect, we derive accurate unified analytical expressions for the ergodic capacity for the aforementioned protocols over independent but not identically distributed (i.n.i.d) $\alpha$-$\mu$ fading channels. Three special cases of the $\alpha$-$\mu$ model, namely, Rayleigh, Nakagami-mandWeibull fading channels were investigated. Our analysis is verified through numerical and simulation results. It is shown that finding the optimal value of the PS factor for the PSR protocol and the EH time fraction for the TSR protocol is a crucial step in achieving the best network performance., Comment: 14 pages, 7 figures, To appear in IEEE Global Communications Conference (IEEE Globecom), Singapore, December 2017