Search

Background: Previous research has established connections between the acromion index (AI), critical shoulder angle (CSA), acromiohumeral distance (AHD), and lateral acromion angle (LAA) with the incidence of rotator cuff tears (RCTs). Despite numerous international studies exploring the variability of shoulder joint morphology and parameters, research incorporating these parameters has yet to be conducted in Somalia. This study aims to analyze and describe the radiological parameters of acromion morphology in the Somali populations. Furthermore, to investigate the relationship of these parameters with rotator cuff tears within the Somali population., Methods: The data and physical examination of 188 patients who had a CT scan of the shoulder from 2018 to 2023 were retrospective analyses, including 107 patients (49 females, 58 males) with RCT and 81 patients (20 females, 61 males) with non-RCT. Using Three-dimensional computed tomography (3D-CT), parameters such as the AI, CSA, AHD, and LAA were compared between the RCT and non-RCT groups. Two independent assessors measured Each parameter from anterior views of the scapula. The inter- and intra-observer reliability was evaluated using the intraclass correlation coefficient (ICC). Additionally, the relationship between these parameters and the presence of rotator cuff tears was explored, and the predictive value of each parameter was assessed through receiver operating characteristic (ROC) analysis., Results: The results showed excellent intra- and inter-observer reliability, with all ICC values above 0.75. Among these, the CSA exhibited the greatest measurement stability, with an intra-observer ICC of 0.929 and an inter-observer ICC of 0.911. Significant positive correlations were identified between the AI, CSA, and the presence of RCTs, with CSA exhibiting the strongest correlation (r = 0.629; P < 0.001). Additionally, significant negative correlations were found between the presence of RCTs and both AHD (-0.247) and LAA (-0.338; P < 0.001 for both). The ROC analysis revealed that the CSA is the most effective parameter for identifying the presence of RCT (area under the ROC curve. 0.857)., Conclusion: The outcome of this study shows that AI, CSA, AHD, and LAA are independent factors associated with rotator cuff tears in the East African, particularly the Somali population. Specifically, larger AI, CSA, and smaller AHD and LAA are correlated with an increased likelihood of RCTs in this population. In patients with shoulder disease suspected of RCTs, using a 3D-CT scan to measure the CSA may be helpful, as it is the best predictor measurement., Clinical Trial Number: Not Applicable., Competing Interests: Declarations. Ethics approval and consent to participate: institutional review board of Kamil Diagnostic center approved this study (KDC-EC-23-011). A written informed consent was obtained from every participant, and all ethical rules were considered during the study. The relevant guidelines by the Declaration of Helsinki were followed within the study. Consent for publication: Not Applicable. Competing interests: The authors declare no competing interests., (© 2024. The Author(s).)

Anatomy-based guidelines for shoulder surgery have established the routine preoperative evaluation of the humeral head. Despite recognized sex differences in humeral head size, there has been limited investigation into sex-specific variations in acromiohumeral contact surface (AHCS) arc length. This study aims to assess sex differences in the AHCS arc length within a sample of the Chinese population. We retrospectively analyzed 169 normal shoulder CT images from a single medical center, collected between 2011 and 2021. The AHCS arc length was defined as the distance from the superior glenoid tubercle to the lateral edge of the greater tuberosity, measured using a three-dimensional reconstruction algorithm. Physiological reference values for the AHCS arc length were determined at three abduction angle intervals. Linear regression analysis was used to assess the correlation between the AHCS arc length and abduction angle in both sexes. The reference values for AHCS arc length were significantly lower in women across three abduction angle intervals (male 48.07 ± 3.37 mm vs. female 43.54 ± 2.54 mm, (0-10] °, p < 0.001; male 45.07 ± 2.34 mm vs. female 40.78 ± 2.06 mm, (10-20] °, p < 0.001; male 42.08 ± 2.03 mm vs. female 38.09 ± 2.44 mm, > 20 °, p = 0.001, respectively). Additionally, the AHCS arc length was linearly and negatively correlated with the abduction angle (male R2 = 0.436, p < 0.001; female R2 = 0.434, p < 0.001, respectively). The present study identified a significant sex difference in the anatomical AHCS arc length in a sample of the normal Chinese population. Preoperative assessment of the AHCS arc length may be necessary for certain shoulder surgeries in the future., Competing Interests: Declarations. Competing interests: The authors declare no competing interests. Informed consent statement: Written informed consent was obtained from the patients to publish this paper. Institutional review board statement: The protocol was previously reviewed and approved by Third Affiliated Hospital of Sun Yat-sen University Ethics and Research Committees ([2022]02-013-01), and with the 1975 Helsinki Declaration and its later amendments or comparable ethical standards., (© 2024. The Author(s).)

Background: The aim of this study was to evaluate the interobserver reliability of measurements of the Acromiohumeral Distance (AHD) first described by Golding et al., the Critical Shoulder Angle (CSA), the Acromion Index with Glenoid Humeral (GH) and Glenoid Acromial (GA) distances, following the measuring method by Nyffeler et al., the Lateral Acromion Angle (LAA), as well as the morphology of the acromion according to Bigliani and the humeral head position according to Maloney in X-rays and MRI. Furthermore, the study assessed the correlation of measurement results in X-ray with those in MRI for AHD, CSA, GA, GH, AI, and LAA., Methods: A total of 187 patients who underwent shoulder joint X-ray and MRI examinations from 09/2016 to 05/2023 were included in the study. Patients with poor imaging quality, arthrosis or radical prior surgeries, like shoulder prosthetic surgery, status post humerus fractures, that have undergone surgery and therefore changed the anatomical features were excluded, what lead to a total study population of 78. X-ray measurements were performed by two observers in the true anteroposterior view, so that the humeral head and the glenoid are shown without overlap, providing a clear view into the joint space. MRI measurements were performed in oblique coronal MRI slices, using the most accurately depicted glenoid surface as a landmark., Results: Interobserver measurement results showed a significance with p < 0.001 for the assessment of acromion type according to Bigliani, humeral head offset assessment according to Maloney, and AHD. No significance was found for interobserver reliability in measuring LAA. Additionally, there was a high correlation of measurement results in X-ray with measurements in MRI for, CSA, GH/GA, and consequently AI, a good correlation for AHD but no correlation could be shown for LAA., Conclusions: These findings provide valuable insights into the robustness of radiological parameters for evaluating shoulder pathology, offering promising prospects for clinical applications and further research. Nevertheless, the specific methodological considerations and patient characteristics should be taken into account when interpreting the results to ensure their accurate application in clinical practice., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Introduction: This study evaluates the role of anatomic scapular morphology in acromion and scapular spine fracture (SSAF) risk after reverse shoulder arthroplasty (RSA)., Methods: Twelve scapular measurements were captured based on pilot study data, including scapular width measurements at the acromion (Z1), middle of the scapular spine (Z2), and medial to the first major angulation (Z3). Measurements were applied to 3D-CT scans from patients who sustained SSAF after RSA (SSAF group) and compared with those who did not (control group). Measurements were done by four investigators, and the intraclass correlation coefficient was calculated. Regression analysis determined trends in fracture incidence., Results: One hundred forty-nine patients from two separate surgeons (J.L., A.M.) were matched by age and surgical indication of whom 51 sustained SSAF after reverse shoulder arthroplasty. Average ages for the SSAF and control cohorts were 78.6 and 72.1 years, respectively. Among the SSAF group, 15 were Levy type I, 26 Levy type II, and 10 Levy type 3 fractures. The intraclass correlation coefficient of Z1, Z2, and Z3 measurements was excellent (0.92, 0.92, and 0.94, respectively). Zone 1 and 3 measurements for the control group were 18.6 ± 3.7 mm and 3.2 ± 1.0 mm, respectively, compared with 22.5 ± 5.9 mm and 2.0 ± 0.70 mm in the SSAF group, respectively. The fracture group trended toward larger Z1 and smaller Z3 measurements. The average scapular spine proportion (SSP), Z1/Z3, was significantly greater in the control 6.20 ± 1.80 versus (12.60 ± 6.30; P < 0.05). Regression analysis showed a scapular spine proportion of ≤5 was associated with a fracture risk <5%, whereas an SSP of 9.2 correlated with a 50% fracture risk., Discussion: Patients with a thicker acromions (Z1) and thinner medial scapular spines (Z3) have increased fracture risk. Understanding anatomic scapular morphology may allow for better identification of high-risk patients preoperatively., (Copyright © 2024 by the American Academy of Orthopaedic Surgeons.)

Purpose: Shoulder surgeries, vital for diverse pathologies, pose a risk of iatrogenic nerve damage. Existing literature lacks diverse bone landmark-specific nerve position data. The purpose of this study is to address this gap by investigating such relationships., Method: This cadaveric study examines axillary, radial and suprascapular nerves' relation with acromion, coracoid and greater tuberosity of the humerus (GT). It also correlates this data with humeral lengths and explores nerve dynamics in relation to arm positions., Results: The mean distance from the axillary nerve to (i) GT was 4.38 cm (range 3.32-5.44, SD 0.53), (ii) acromion was 6.42 cm (range 5.03-7.8, SD 0.694) and (iii) coracoid process was 4.3 cm (range 2.76-5.84, SD 0.769). Abduction brought the nerve closer by 0.36 cm, 0.35 cm and 0.53 cm, respectively. The mean distance from radial nerve to (i) GT was 5.46 cm (range 3.78-7.14, SD 0.839), (ii) acromion was 7.82 cm (range 5.4-10.24, SD 1.21) and (iii) tip of the coracoid process was 6.09 cm (range 4.07-8.11 cm, SD 1.01). The mean distance from the suprascapular nerve to the acromion was 4.2 cm (range 3.1-5.4, SD 0.575). The mean humeral length was noted to be 27.83 cm (range 25.3-30.7, SD 1.13). There was no significant correlation between these distances and humeral lengths., Conclusion: It is essential to exercise caution to avoid axillary nerve damage during the abduction manoeuvre, as its distance from the greater tuberosity and tip of the coracoid process has shown a significant reduction. The safe margins, in relation to the length of the humerus and consequently the patient's stature, exhibit no significant variation. In situations where the greater tuberosity (GT) and the border of the acromion are inaccessible due to reasons such as trauma, the tip of the coracoid process can serve as a dependable bone landmark for establishing a secure surgical margin., (© 2024. The Author(s) under exclusive licence to SICOT aisbl.)

Accurate arm circumference (AC) measurement is required for accurate blood pressure (BP) readings. Standards stipulate measuring arm circumference at the midpoint between the acromion process (AP) and the olecranon process. However, which part of the AP to use is not stipulated. Furthermore, BP is measured sitting but arm circumference is measured standing. We sought to understand how landmarking during AC measurement and body position affect cuff size selection. Two variations in measurement procedure were studied. First, AC was measured at the top of the acromion (TOA) and compared to the spine of the acromion (SOA). Second, standing versus seated measurements using each landmark were compared. AC was measured to the nearest 0.1 cm at the mid-point of the upper arm by two independent observers, blinded from each other's measurements. In 51 participants, the mean (±SD) mid-AC measurement using the anchoring landmarks TOA and SOA in the standing position were 32.4 cm (±6.18) and 32.1 cm (±6.07), respectively (mean difference of 0.3 cm). In the seated position, mean arm circumference was 32.2 (±6.10) using TOA and 31.1 (±6.03) using SOA (mean difference 1.1 cm). Kappa agreement for cuff selection in the standing position between TOA and SOA was 0.94 (p < 0.001). The landmark on the acromion process can change the cuff selection in a small percentage of cases. The overall impact of this landmark selection is small. However, standardizing landmark selection and body position for AC measurement could further reduce variability in cuff size selection during BP measurement and validation studies., (© 2024 The Author(s). The Journal of Clinical Hypertension published by Wiley Periodicals LLC.)

The purpose of this study was to identify the relationship between scapula morphology and rotator cuff tears (RCT). Hundred seventeen shoulders with and 87 shoulders without RCTs were included in this retrospective study. The critical shoulder angle (CSA) and lateral acromion angle in the coronal view, and the acromial coverage angle (ACA) and coracoid and scapular spine angle (CSSA) in the sagittal view were evaluated using 3-dimensional computed tomography. The glenoid anterior tilt, anterior acromial projection angle (AAPA), coracoid process angle, scapular spine angle (SSA), and inferior angle angle (IAA) with respect to the scapular plane were measured in the sagittal view. In univariate logistic regression analysis, CSA, ACA, AAPA, SSA, and IAA were significantly greater in shoulders with RCTs, whereas CSSA was greater in shoulders without RCTs. In multivariate logistic regression analysis, CSA and IAA were greater in shoulders with RCT and were significantly associated with this condition (P=.00073, P=.0032). This study has shown us that RCTs were associated with a greater curvature of the scapular body and greater CSA and IAA.

Background: Subacromial spurs are considered the one of the pathology underlying shoulder impingement syndrome. Furthermore, few studies have focused on the morphology of the subacromial spurs in normal Chinese people. This study aimed to study the spur distribution and to illustrate the morphology of spurs, which may help guide the extent of acromioplasty., Methods: A total of 93 normal individuals were enrolled, and both shoulders of all enrolled individuals were analyzed. The subjects were divided and classified into three different groups by ages: group I = 18-40 years, group II = 41-60 years, and group III ≥ 61 years. The osteophyte distribution, osteophyte area, subacromial surface area and osteophyte area/subacromial surface area ratio were measured and illustrated using Mimics and 3-matic software. The shape of the acromion was classified according to the Bigliani and Morrison classification system. The acromial angle was also classified. Then, the relationship between osteophytes, acromial classification and acromial angle was analyzed., Results: Type II (curved shape) was the most common type of acromion, and the hooked shape was a rare form. A significant increase in the left subacromial surface area in males was observed in group III compared with group I (P < 0.001) and group II (P = 0.004). The total spur/subacromial area ratio was significantly higher in group II than I. An obvious increase in the right subacromial area was observed in group III compared with group I (P = 0.004). Furthermore, there was a significant increase in the right spur area (P = 0.021) and total spur/subacromial area ratio (P = 0.006) in females in group II compared with group I. Fewer spurs were observed on the left than on the right side (p = 0.0482). One spur was most common among type II acromions (29/36) (80.56%) on the left side and the right side (34/52, 65.38%)., Conclusions: Spurs osteophytes are mainly distributed with an irregular shape and mostly run through the medial and lateral sides of the subacromial surface in normal subjects. The characteristics of subacromial spurs are so diverse that a surgeon must conduct subacromial decompression completely based on the morphology of individual spurs., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Dong et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: The etiology of rotator cuff tears (RCTs) have been investigated for years and many underlying causes have been identified. Shoulder joint morphology is one of the extrinsic causes of RCTs., Aim: Morphometric measurements on MRI sections determined which parameters are an important indicator of RCT in patients with shoulder pain. The aim of this study was to determine the risk factors in the etiology of RCTs by evaluating the shoulder joint morphology with the help of previously defined radiological parameters., Method: Between January 2019-December 2020, 408 patients (40-70 years old) who underwent shoulder MRI and met the criteria were included in the study. There were 202 patients in the RCT group and 206 patients in the control group. Acromion type, acromial index (AI), critical shoulder angle (CSA), acromiohumeral distance (AHD), lateral acromial angle (LAA), acromial angulation (AA), acromion-greater tuberosity impingement index (ATI), and glenoid version angle (GVA) were measured from the MRI images of the patients., Results: AI (0.64 vs. 0.60, p = 0.003) CSA (35.3° vs. 32.4°, p = 0.004), ATI (0.91 vs. 0.83, P < 0.001), and AA (13.6° vs. 11.9°, p = 0.011) values were higher in the RCT group than in the control group and the difference was significant. AHD (8.1 mm vs. 9.9 mm, P < 0.001), LAA (77.2° vs. 80.9°, p = 0.004) and GVA (-3.9° vs. -2.5°, P < 0.001) values were lower in the RCT group than in the control group, and again the difference was significant. According to the receiver operating characteristic curve analysis, the cutoff values were 0.623 for AI and 0.860 for ATI., Conclusion: Acromion type, AI, CSA, AHD, LAA, AA, ATI, and GVA are suitable radiological parameters to evaluate shoulder joint morphology. High AI, CSA, AA, ATI, GVA and low AHD and LAA are risk factors for RCT., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Introduction: the acromion is a small portion of the scapula that extends towards the anterior region from the spine of the scapula. Traditionally, the acromion is classified by the shape of its inferior surface in a sagittal plane. Acromial morphology has been found to be related to rotator cuff injury., Objective: to determine the association between the type of acromion with a higher incidence of rotator cuff rupture. Study population: patients who come to the Traumatology and Orthopedics Service of a third level hospital at Monterrey, Mexico, due to a painful shoulder and who have undergone a simple magnetic resonance of the shoulder., Material and Methods: a cross-sectional, retrospective and descriptive study was carried out, in which 273 magnetic resonance studies were reviewed in patients who met the inclusion criteria. The type of acromion was reported according to the morphological classification in type I to IV and the state of the rotator cuff: without rupture, partial rupture or complete rupture, making a comparison between right and left shoulder., Results: in this study we found a value of p = 0.473 which concludes that there is no relation between the type of acromion and the injury of the rotator cuff., Conclusion: in the present study, unlike what has been published in the literature, it was found that type II acromion was the one that was associated in most cases with a rotator cuff tear.

Background: The aim of this study was to assess whether the anteroposterior coverage of the acromion reflecting acromial morphology affects the rotator cuff tear (RCT) and tear size, in addition to the lateral coverage., Methods: Medical records of 356 patients with RCTs, concentric osteoarthritis, and calcific tendinitis identified using three-dimensional computed tomography between January 2016 and December 2017 were retrospectively analyzed. The patients were divided into group A (those with RCTs) and group B (those with concentric osteoarthritis or calcific tendinitis). Subsequently, group A was subdivided into three categories according to the size of RCTs: small-to-medium, large, and massive. The lateral coverage was measured through the lateral acromial angle (LAA) and critical shoulder angle (CSA), whereas the anteroposterior coverage was measured via the acromial tilt (AT), acromiohumeral interval (AHI) in the sagittal view, and anteroposterior coverage index (APCI) as a new radiologic parameter., Results: Between groups A and B, CSA (34.5° ± 3.4° and 30.8° ± 3.4°, respectively), APCI (0.83 ± 0.10 and 0.75 ± 0.08, respectively), and AHI (6.3 ± 2.0 mm and 7.8 ± 1.8 mm, respectively) were significantly different (all p < 0.001), whereas LAA and AT did not show a significant difference between the groups ( p = 0.089 and p = 0.665, respectively). The independent predictive radiologic parameters of the RCT were the CSA, APCI, and AHI ( p < 0.001, p < 0.001, and p = 0.043, respectively); among these, the APCI showed the highest regression coefficient (odds ratio = 2.82). The parameters associated with the size of RCTs were CSA ( p = 0.022) and AHI, of which AHI, in particular, had the most significant effect on both small-to-medium and large tears (all p < 0.001)., Conclusions: Large CSA, high APCI, and low AHI were predictors of RCTs, with the APCI showing the strongest correlation. In addition to the large CSA, low AHI also correlated with the size of RCTs and affected the entire size groups. We suggest that both the lateral coverage and anteroposterior coverage of the acromion should be considered essential factors for predicting the presence of RCTs and tear size., Competing Interests: CONFLICT OF INTEREST: No potential conflict of interest relevant to this article was reported., (Copyright © 2022 by The Korean Orthopaedic Association.)

Introduction: Shoulder impingement syndrome is evaluated radiologically with two-dimensional measurement parameters. None of these measurement parameters accurately reflect the three-dimensional geometry. The purpose of this study was to evaluate the volumetric status of the subacromial space in patients with shoulder impingement syndrome and to investigate its relationship with two-dimensional parameters., Hypothesis: The primary hypothesis of this study is that subacromial volume is reduced in patients with impingement syndrome. The second hypothesis is that the sagittal plane morphology of the acromion reflects the subacromial volume better than the coronal plane morphology., Patients and Methods: This retrospective study consisted of a total of 52 participants: 26 patients with impingement syndrome and 26 controls. Volumetric measurements were performed with using magnetic resonance imaging. The relationship between humerus and acromion was evaluated by acromiohumeral distance. The sagittal plane morphology of the acromion was evaluated with an objective acromial angle, while the coronal plane morphology was evaluated with a lateral acromial angle. The radiological parameters between groups were compared., Results: The mean subacromial volume was significantly smaller in the impingement group compared to the control group (p=0.01). The subacromial volume had a negative correlation with the objective acromial angle (R=-0.46; p=0.01) The mean tendon volume was significantly higher in the impingement group (p<0.001). The mean acromiohumeral distance in the impingement group (6.8mm±1.0mm), was calculated to be significantly lower than the control group (10.1mm±1.5mm) (p<0.001). There was a positive moderate correlation between subacromial volume and acromiohumeral distance (R=0.61; p=0.01)., Discussion: This is the first study to demonstrate a reduction in subacromial volume in patients with impingement syndrome. The sagittal plane morphology of the acromion, rather than the coronal plane, appears to be more closely related to the subacromial volume., Level of Evidence: III; case-control study., (Copyright © 2021 Elsevier Masson SAS. All rights reserved.)

Background: Shoulder injections for conditions such as adhesive capsulitis are commonly performed and can be administered through image-based or landmark-based injection approaches. Ultrasound-guided injections are widely used and accurate because ultrasound allows real-time visualization of the needle and injected contrast. Landmark-based injections would be advantageous, if they were accurate, because they would save the time and expense associated with ultrasound. However, few prospective studies have compared well-described landmark-based shoulder injection techniques without ultrasound., Question/purpose: Using anatomic landmarks, and without using ultrasound, is the accuracy of glenohumeral injection for adhesive capsulitis greater via the posterior approach or via a new anterior approach?, Methods: Between 2018 and 2020, we treated 108 patients potentially eligible for adhesive capsulitis treatment. These patients had clinical symptoms of aggravating shoulder pain with a duration of less than 4 months and passively impaired, painful glenohumeral ROM. Due to the exclusion of patients with other shoulder conditions (full-thickness rotator cuff ruptures and posttraumatic stiffness), 95 patients received an injection in this sequential, prospective, comparative study. Between 2018 and 2019, 41 patients (17 males and 24 females; mean age 52 ± 5 years; mean BMI 24 ± 3 kg/m2) were injected through the posterior approach, with the acromion as the anatomical landmark, during the first part of the study period. After that, between 2019 and 2020, 54 patients (20 males and 34 females; mean age 54 ± 4 years; mean BMI 23 ± 3 kg/m2) received an injection through a new anterior approach, with the acromioclavicular joint as the anatomic landmark, during the second part of the study period. Injections via both approaches were administered by two experienced shoulder specialists (both with more than 10 years of experience). Both specialists had experience with the posterior approach before this study, and neither had previous training with the new anterior approach. Injections contained a corticosteroid, local anaesthetic, and contrast medium. Radiographs were taken within 20 minutes after the injection, and a radiologist blinded to the technique determined accuracy. Accurate injections were defined as having contrast fluid limited to the glenohumeral joint, while inaccurate injections displayed leakage of contrast fluid into the soft tissue or subacromial space. All of the enrolled patients were analyzed., Results: In the group with the posterior approach, the accuracy was 78% (32 of 41) in contrast to 94% (51 of 54, odds ratio 0.21 [95% CI 0.05 to 0.83]; p = 0.03) in patients with the new anterior approach., Conclusion: The new anterior approach without the use of ultrasound was more accurate than the posterior approach. In fact, it was nearly as accurate as previously published ultrasound-guided approaches. We recommend using the new anterior approach for intraarticular glenohumeral injections instead of ultrasound-guided injections because it will save time and costs associated with ultrasound. Still, the clinical effects (anxiety, pain, functional outcome, and adverse events) of the new anterior approach should be compared with ultrasound-guided injections in a randomized study., Level of Evidence: Level II, therapeutic study., Competing Interests: Each author certifies that neither he or she, nor any member of his or her immediate family, has funding or commercial associations (consultancies, stock ownership, equity interest, patent/licensing arrangements, etc.) that might pose a conflict of interest in connection with the submitted article. All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request., (Copyright © 2021 by the Association of Bone and Joint Surgeons.)

Background: The acromial arterial rete (AAR) is the junction between the skin blood supply of the cervical side and that of the upper arm, and it is the only site crossed by the trans-regional blood supply of the cervico-humeral flap (CHF). The aim of this study was to explore the structures of AAR to optimizing flap design., Methods: A body arteriography and spiral CT scan were performed on 33 whole adult corpses. The 3D reconstruction was used to perform continuous digital layered anatomy of the shoulder and upper chest; the acromion and acromioclavicular joint were used as the center to observe the source, route and distribution characteristics of a perforating branch and their anastomosis., Results: The perforating branches were separated from an acromial branch of the transverse cervical artery (97%), posterior humeral circumflex artery (95%), a deltoid branch of the thoracoacromial artery (95%), and the acromial branch of the thoracoacromial artery (93%). The diameter of the acromial branch of the transverse cervical artery at its initial location was 1.18 ± 0.37 mm; the trunk length was 12.53 ± 3.83 cm, and it was anastomosed with other blood vessels in three forms., Conclusion: Deep fascia should be included in the flap design. Three kinds of pedicled transfer flaps can be designed with the acromial branch of transverse carotid artery as the vascular pedicle. Free flaps can be designed with the acromial branch of thoracoacromial artery as the vascular pedicle., (© 2021. The Author(s), under exclusive licence to Springer-Verlag France SAS, part of Springer Nature.)

Critical shoulder angle (CSA) is the angle between the superior and inferior bone margins of the glenoid and the most lateral border of the acromion and is potentially affected during a rotator cuff tear (RCT). Acromioplasty is generally performed to rectify the anatomy of the acromion during RCT repair surgery. However, limited information is available regarding the changes in the CSA after anterolateral acromioplasty. We hypothesized that CSA can be decreased after anterolateral acromioplasty. Data were retrospectively collected from 712 patients with RCTs and underwent arthroscopic rotator cuff repair between January 2012 and December 2018, of which 337 patients were included in the study. The presurgical and postsurgical CSA were then determined and compared using a paired samples t test. Because previous study mentioned CSA more than 38 degrees were at risk of rotator cuff re-tear, patients were segregated into two groups: CSA < 38° and CSA ≥ 38°; these groups were compared using an independent-samples t test. These 337 participants (160 male and 177 female) presented a CSA of 38.4° ± 6.0° before anterolateral acromioplasty, which significantly decreased to 35.8° ± 5.9° after surgery (P < .05). Before surgery, 172 patients were present in the CSA ≥ 38° group and 57 were preset in the CSA < 38° group after surgery. The CSA decreased significantly in the CSA ≥ 38° group rather than in the CSA < 38° group (P < .05). In conclusion, the CSA can be effectively decreased through anterolateral acromioplasty, and this reduction in the CSA is more significant among individuals with CSA ≥ 38° than among those with CSA < 38°, indicating that acromioplasty is recommended along with RCT repair especially among individuals with a wide presurgical CSA., Competing Interests: The authors have declared that no competing interests exist.

To find out which structure is crucial for the formation of shoulder impingement syndrome with the purpose of directing surgical procedures of subacromial decompression and discussing whether it is necessary to manage acromioclavicular joint during operation and how to do it properly., Methods: This was a retrospective study. Clinical data and preoperative computed tomography (CT) images were collected from patients who were diagnosed with rotator cuff tears between January 2017 and August 2019 (sample size: 46) and those who were diagnosed without rotator cuff tears between March 2018 and August 2019 (sample size: 44) in our institution, respectively. Three-dimensional models of shoulders were established by multiplanar reconstruction of CT scans and measurements were performed on these models. The parameters such as the acromial length and width, the axial tilt, and the distance from acromial margin to glenoid plane were measured in an adjusted axial plane, and the critical shoulder angle and the spatial volume under acromioclavicular joint were measured in an adjusted coronal plane. The demographic characteristics, the acromial morphology and the spatial volume under acromioclavicular joint were compared to find significant differences between the two groups. The association between the axial tilt and the distance from acromial margin to glenoid plane was evaluated by an ordinary least squares linear regression., Results: The patients with rotator cuff tears consisted of 16 males and 30 females, among which 30 right shoulders and 16 left shoulders were included. The patients without rotator cuff tears consisted of 28 males and 16 females, among which 15 right shoulders and 29 left shoulders were involved. Significant differences between the groups were found in the acromial width (3.332 cm vs 3.111 cm), the axial tilt (33.765° vs 23.829°), the critical shoulder angle (32.630° vs 30.363°), the distance from anterior 3 cm of lateral acromial margin (range, 2.476 cm-3.302 cm vs 1.993 cm-3.089 cm), and anterior 0.9 cm of medial acromial margin (range, 0.967 cm-2.369 cm vs 0.668 cm-1.993 cm) to glenoid plane, and the spatial volume under acromioclavicular joint (1.089 cm vs 1.446 cm) in the two groups. No significant differences were found in the age (60.0 years vs 58.3 years) or the acromial length (4.187 cm vs 4.184 cm). Significant association was revealed by linear regression analysis between the axial tilt and the distance from anterior two-thirds of lateral acromial margin to glenoid plane, and similar association was also found in the anterior half of medial margin., Conclusion: Anterior two-thirds of lateral acromial margin, anterior half of medial acromial margin, and inferior aspect of acromioclavicular joint are crucial structures and need to be fully decompressed when treating patients with rotator cuff tears., (© 2021 The Authors. Orthopaedic Surgery published by Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.)

Background: We investigated the branching pattern and topographic anatomy of the nerves to the teres minor (Tm) and the long head of the triceps brachii (LHT) in relation to reference lines extending between surface landmarks, to identify the innervation patterns of, and the optimal needle placement points within, the Tm and the LHT., Methods: The anatomical courses of the nerves to the Tm and the LHT were investigated in 37 upper limbs of fresh-frozen cadavers. Distances from the acromion to nerve penetration points, and crossing points of reference lines with the Tm and LHT were measured in 27 cadaveric upper limbs., Results: The Tm was innervated by the axillary nerve in all specimens in three patterns, and the LHT was innervated exclusively by the radial nerve. Our dissection and measurements indicate that the midpoint of the reference line from the acromion to the inferior angle of the scapula is the optimal needle insertion point for the Tm. The target point for the LHT appears to be the one-third point of the reference line from the acromion to the medial epicondyle, or the two-thirds point of the reference line from the acromion to the axillary fold., Conclusions: We investigated the branching pattern of the nerves to the Tm and the LHT and propose optimal needle placement points for electromyography of the Tm and LHT., (© 2020 Wiley Periodicals LLC.)

Background: The purpose was to analyze the influence of deltoid lengthening due to different implant designs and anatomic variations of the acromion and scapular spine (SS) in the parasagittal plane on strain patterns after reverse shoulder arthroplasty (RSA)., Methods: Ten cadaveric shoulders with strain rosettes placed on the surface of the acromial body (Levy II) and SS (Levy III) were tested using a shoulder simulator. RSA using humeral onlay (+3, +5, +8, +10, +13 mm) and glenosphere lateralization (0, +6 mm) was performed. Arm lengthening and magnitude of strain on acromion/SS were measured. The length of deltoid was assessed using validated computer modeling. Anatomic variance of the SS angle and position of acromion in relation to the scapular plane was examined. For comparison of strain as a function of deltoid lengthening, 25 mm was used as a threshold value for comparison based on previous literature demonstrating a decrease in Constant score and active anterior elevation in patients with arm lengthening >25 mm., Results: At maximal deltoid lengthening (30.8 mm), average strains were 1112 με (acromion) and 1165 με (SS) (P < .01). There was an 82.6% increase in acromial strain at maximum lengthening compared with 25 mm (P = .02) and a strain increase of 79 με/mm deltoid lengthening above a threshold of 25 mm. The strain results delineated 2 anatomic groups: 5 of 10 specimens (group A) showed higher strain on SS (1445 με) vs. acromion (862 με, P = .02). Group A had a more posteriorly oriented acromion, whereas group B was anteriorly oriented (P < .001)., Conclusion: Deltoid lengthening above 25 mm produced large strains on the acromion/SS. Anatomic variation may indicate that as the acromion is more posteriorly oriented, the SS takes more strain from the deltoid vs. the acromion. Our study's data may help surgeons identify a high-risk population for increased strain patterns after RSA., (Copyright © 2020 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Context: Recreational overhead athletes are exposed to high overload, which increases the risk of shoulder injuries. Reduction of the acromiohumeral distance (AHD) is often associated with rotator cuff-related shoulder pain (RCRSP) among the general population. However, the AHD of symptomatic shoulders of recreational athletes has not yet been compared with their asymptomatic shoulders., Objective: To compare the AHD of a symptomatic to asymptomatic shoulder at rest (0°) and 60° abduction. To establish the relationship between AHD, pain, and functional limitations of recreational athletes with RCRSP., Design: Cross-sectional study., Setting: University laboratory., Participants: A total of 45 recreational overhead athletes with RCRSP were examined., Main Outcome Measures: The AHD was measured by ultrasonography at 0° and 60° abduction (angles). Shoulder pain was assessed using a numeric pain scale, whereas functional limitations were assessed using the The Disabilities of the Arm, Shoulder, and Hand questionnaire. Differences in the between-shoulders condition (symptomatic and asymptomatic) were determined using 2-way analysis of variance for repeated measures. A Pearson correlation established the relationship between AHD, pain, and functional limitations., Results: No angles × shoulder condition interactions (P = .776) nor shoulder condition effects (P = .087) were detected, suggesting no significant differences (P > .05) between asymptomatic and symptomatic shoulders in the AHD at 0° or 60°. The AHD at 60° reduced significantly compared with 0° (3.05 [1.36] mm [2.77-3.33], angle effects: P < .001). The AHD at 0° and 60° was not correlated with pain or functional limitations (-.205 ≤ r ≤ .210, .167 ≤ P ≤ .585)., Conclusions: The AHD of recreational athletes is not decreased in symptomatic shoulders compared with asymptomatic shoulders. Reduction of the AHD in symptomatic shoulders is not associated with an increase in pain or functional limitations of recreational athletes with RCRSP.

Background: The gross pathology of the acromial undersurface in shoulders with rotator cuff tears with subacromial impingement is not completely understood. Many researchers have focused on damage to the anterior one-third area of the acromial undersurface, but few have studied the middle and posterior one-third areas. The purpose of this study was to clarify where and what damage occurs at the acromial undersurface in patients with rotator cuff tears., Methods: We performed arthroscopic shoulder (n = 182, all with rotator cuff tears; mean age, 64.9 ± 8.4 years) and cadaveric shoulder (n = 23, 14 intact cuffs and 9 rotator cuff tears; mean age, 74.8 years) evaluations to observe the extent and degree of damage to the acromial undersurface. We statistically analyzed the association between the severity of the damage to the acromial undersurface (assessed using the Copeland-Levy classification as A0, normal; A1, minor scuffing; A2, major damage; or A3, visualization of bare bone area) and rotator cuff tear size (assessed using the classification of DeOrio and Cofield as partial; small, <1 cm; medium, 1-3 cm; or large or massive, >3 cm)., Results: The anterior, middle, and posterior one-thirds of the acromial undersurface were somewhat damaged (class A1-A3) in 92.6%, 90.1%, and 78.6% of shoulders with rotator cuff tears, respectively, according to arthroscopic evaluation. Increasing cuff tear size was significantly associated with worsening degree of damage to the acromial undersurface (P < .001). In the 9 cadaveric shoulders with rotator cuff tears, class A1-A3 damage was identified in the anterior one-third area in 100%, in the middle one-third area in 88.9%, and in the posterior one-third area in 33.3%. In the 14 cadaveric shoulders with a normal rotator cuff, class A1-A3 damage was identified in the anterior one-third area in 35.7%, in the middle one-third area in 14.3%, and in the posterior one-third area in 0.71%., Conclusion: Damage to the acromial undersurface in patients with rotator cuff tears occurred at the middle, posterior, and anterior one-third areas, and the degree of damage was related to cuff tear size. Surgeons should evaluate the entire acromial undersurface to check for subacromial impingement damage at the middle and posterior one-third areas as well as the anterior one-third area of the acromial undersurface; this might aid in the treatment of patients with rotator cuff disease or subacromial impingement syndrome., (Copyright © 2020 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: Narrowing of the acromiohumeral distance (AHD) implies a rotator cuff tear. However, conventional AHD measurements using two-dimensional (2D) imaging or with the patient in the supine position might differ from that while standing during daily activity. This study aimed to evaluate the three-dimensional (3D) actual distance between the acromion and humeral head in the standing position and compare the AHD values with those obtained using conventional measuring methods., Methods: Computed tomography (CT) images of 166 shoulders from 83 healthy volunteers (31 male and 52 female; mean age 40.1 ± 5.8 years; age range, 30-49 years) were prospectively acquired in the supine and standing positions using conventional and upright CT scanners, respectively. The minimum distance between the acromion and humeral head on the 3D surface models was considered as the 3D AHD. We measured the 2D AHD on anteroposterior digitally reconstructed radiographs. The AHD values were compared between the supine and standing positions and between the 2D and 3D measurements., Results: The mean values of 2D AHD were 8.8 ± 1.3 mm (range, 5.9-15.4 mm) in the standing position and 8.1 ± 1.2 mm (range, 5.3-14.3 mm) in the supine position. The mean values of 3D AHD were 7.3 ± 1.4 mm (range, 4.7-14.0 mm) in the standing position and 6.6 ± 1.2 mm (range, 4.4-13.7 mm) in the supine position. The values of 3D AHD were significantly lower than those of 2D AHDs in both the standing and supine positions (P < 0.001). The values of 2D and 3D AHDs were significantly lower in the supine position than in the standing position (P < 0.001)., Conclusions: This study evaluated the 3D AHD of normal shoulders in the standing position using an upright CT scanner. The present results indicated that assessments in the supine position can underestimate the value of the AHD compared with those made in the standing position and that assessments using 2D analysis can overestimate the value.

The critical shoulder angle has been associated with the development of rotator cuff lesions. Over time, this association has been interpreted as a cause-effect relation without scientific evidence. Beyond the controversies that exist on the reliability and relevance of this radiographic parameter, the critical shoulder angle per se may not be responsible for rotator cuff tears because patient activities throughout several decades could induce not only cuff lesions but also bone remodeling at the acromial level., (Copyright © 2020 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Introduction: Although degenerative osteoarthritis of the acromioclavicular joint is a common finding on technical investigations, not every patient experiences pain or function loss. The difference between symptomatic and asymptomatic patients is currently not elucidated. Therefore, we want to investigate the acromioclavicular relationship in normal, asymptomatic, and symptomatic degenerated ACJ., Materials and Methods: 84 normal ACJ, 39 asymptomatic degenerated ACJ, and 30 symptomatic degenerated ACJ were 3D reconstructed. The morphological dimensions and the relationship of the acromion and distal clavicle were measured using computational software. The reproducibility of this technique was evaluated using inter- and intra-observer reliability., Results: The mean anteroposterior and superoinferior distance of both the clavicle and acromion was significantly larger in asymptomatic and symptomatic degenerative ACJ compared to the normal ACJ (p < 0.001). In symptomatic osteoarthritic ACJ, both the anterior and posterior borders of the acromion were significantly more anterior to the borders of the clavicle than in the normal group and asymptomatic group (p < 0.001). Subsequent ROC curve analysis resulted in a sensitivity of 86.7% and a specificity of 88.6% for anterior subluxation of the ACJ. This technique showed an excellent inter- and intra-observer reliability., Conclusions: In patients with degenerative ACJ, both the distal clavicle and acromion are enlarged. In asymptomatic patients, the AC relationship is the same as in normal patients, in contrast, in patients with symptomatic degenerative ACJ, the acromion is subluxated anteriorly compared to the clavicle.

Background: The Critical Shoulder Angle was introduced as a combined radiographic surrogate parameter reflecting the influence of the morphological characteristics of the scapula on the development of degenerative shoulder disease such as rotator cuff tears and osteoarthritis. Although, glenoid inclination and lateral extension of the acromion were studied in biomechanical models separately, no investigation included all three individual parameters that determine the Critical Shoulder Angle: glenoid inclination, acromial coverage and acromial height in one cadaveric study protocol., Methods: Three proximal humerus cadavers were attached to a robotic shoulder simulator which allowed for independent change of either lateral acromial coverage, glenoid inclination or acromial height. Combined dynamic scapula-thoracic and glenohumeral abduction up to 60° with different Critical Shoulder Angle configurations was performed and muscle forces as well as joint reaction forces were recorded., Findings: All three components had an effect on either muscle forces and or joint reaction forces. While glenoid inclination showed the highest impact on joint stability with increasing upward-tilting causing cranial subluxation, changing of the lateral acromial coverage or acromial height had less influence on stability but showed significant alteration of joint reaction forces., Interpretation: All three components of the Critical Shoulder Angle, glenoid inclination, lateral acromial extension and acromial height showed independent biomechanical effects when changed isolated. However, glenoid inclination seems to have the largest impact regarding joint stability., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Background: Portal placement is a key factor for the success of arthroscopic procedures, particularly in rotator cuff repair. We hypothesize that the acromial anatomy may strongly determine the position of the shoulder bony landmarks and limit the surgeon's freedom to position the arthroscopic approaches in direction towards the acromion. The purpose of this study was to analyze the relation between different acromial shapes and the freedom of movement of arthroscopic instruments relative to the rotator cuff from standardized arthroscopic portals in a laboratory study on 3D shoulder models., Methods: 3D models of shoulders with a broad range of different acromial shapes were printed using CT and MRI scans. Angles from the portals to defined points on the rotator cuff and the supraglenoid tubercle were measured. In conventional radiographs, the critical shoulder angle, the scapular body acromial angle, and the glenoid acromial angle were measured and compared with the measured angles to the rotator cuff., Results: There was a large variation of angles of approach of instruments to the rotator cuff between the seven shoulders for each portal. From the joint line portal and the posterior edge portal, the biggest angles were measured to the posterior cuff. From the intermediate portal, the angles were largest to the intermediate rotator cuff and from the anterior portals to the anterior cuff. To the supraglenoid tubercle, best access was from anterior. For all portals, there was a big correlation between the glenoid acromial angle and the scapular body acromial angle with the angles of approach to the tendon and especially to the supraglenoid tubercle., Conclusion: The access to the rotator cuff from almost every portal is influenced by the acromial shape. As hypothesized, a small (small GAA) and flat (big SBAA) acromion provide an easier approach to the rotator cuff from almost every portal. Therefore, it may severely influence the instruments maneuverability.

Background: Scapular anatomy, as measured by the acromial index (AI), critical shoulder angle (CSA), lateral acromial angle (LAA), and glenoid inclination (GI), has emerged as a possible contributor to the development of degenerative shoulder conditions such as rotator cuff tears and glenohumeral osteoarthritis. The purpose of this study was to investigate the published literature on influences of scapular morphology on the development of degenerative shoulder conditions., Methods: A systematic review of the Embase and PubMed databases was performed to identify published studies on the potential influence of scapular bony morphology on the development of degenerative rotator cuff tears and glenohumeral osteoarthritis. The studies were reviewed by 2 authors. The findings were summarized for various anatomic parameters. A meta-analysis was completed for parameters reported in more than 5 related publications., Results: A total of 660 unique titles and 55 potentially relevant abstracts were reviewed with 30 published articles identified for inclusion. The AI, CSA, LAA, and GI were the most commonly reported bony measurements. Increased CSA and AI correlated with rotator cuff tears, whereas lower CSA appeared to be related to the presence of glenohumeral osteoarthritis. Decreased LAA correlated with degenerative rotator cuff tears. Five articles reported on the GI with mixed results on shoulder pathology., Discussion: Degenerative rotator cuff tears appear to be significantly associated with the AI, CSA, and LAA. There does not appear to be a significant relationship between the included shoulder parameters and the development of osteoarthritis., (Copyright © 2019 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Purpose: To scope the scientific literature and analyze the influence of bony risk factors for degenerative full-thickness primary rotator cuff tear., Methods: A systematic review of databases PubMed, Scopus, EMBASE, and Cochrane Library was performed up to June 30, 2018. Meta-analysis was performed with mean difference (MD) or risk ratio for degenerative full-thickness rotator cuff injury, and when there were ≥3 studies for the considered potential risk factor. Methodologic quality was assessed using the Newcastle-Ottawa scale., Results: We analyzed 34 studies comprising 5,916 shoulders (3,369 shoulders with rotator cuff tear and 2,546 controls) and identified 19 potential risk factors for degenerative full-thickness rotator cuff tears. There was moderate evidence that a higher critical shoulder angle (MD = 4.41, 95% confidence interval [CI] 3.43 to 5.39), higher acromion index (MD = 0.06, 95% CI 0.04 to 0.09), and lower lateral acromion angles (MD = -7.11, 95% CI -8.32 to -5.90) were associated with degenerative full-thickness rotator cuff tears compared with controls. Moderate evidence showed that a type III acromion significantly increases the risk for full-thickness degenerative rotator cuff tear (risk ratio = 2.26, 95% CI 1.38 to 3.70)., Conclusion: There is moderate evidence that larger critical shoulder angle, higher acromion index, lower lateral acromion angles, and a type III acromion are significantly associated with degenerative full-thickness rotator cuff tears. Other potential risk factors identified showed insufficient evidence., Level of Evidence: Level IV, systematic review of level II to IV studies., (Copyright © 2019 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: Locked plating of displaced proximal humeral fractures is common, but rates of subacromial impingement remain high. This study used a multidisciplinary approach to elucidate the relationships between common surgical parameters, anatomic variability, and the likelihood of plate impingement., Methods: The experiment was completed in 3 phases. First, a controlled in vitro experiment was conducted to simulate impingement. Second, a dynamic in silico musculoskeletal model modeled changes to implant geometry, surgical techniques, and acromial anatomy, where a collision detection algorithm was used to simulate impingement. Finally, in vivo shoulder kinematics were recorded for 9 activities of daily living. Motions that created a high likelihood of impingement were identified., Results: Of simulated impingement events, 73.9% occurred when the plate was moved proximally, and 84% occurred when acromial tilt was 20° or 25°. Simulations of impingement occurred at cross-body adduction angles between 10° and 50°. Impingement occurred at an average of 162.0° ± 14.8° abduction with 10 mm distal plate placement, whereas the average was 72.1° ± 11.4° with 10 mm proximal placement. A patient may encounter these shoulder angles when performing activities such as combing one's hair, lifting an object overhead, and reaching behind one's head., Discussion and Conclusion: Proximal implant placement and decreases in acromial tilt play major roles in the likelihood of impingement, whereas plate thickness and humeral head center of rotation should also be considered. Careful preoperative planning that includes these factors could help guide operative decision making and improve clinical outcomes., (Copyright © 2018 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Introduction: Anatomical variations of the lateral offset of the acromion (LOA) are supposed to be a factor favoring of the development of rotator cuff tears. The primary objective of this study is to quantify the inter-individual variations of the lateral offset of the acromion., Methods: The morphology of 103 dried scapula was studied. Scapula with an os-acromiale, fractures and osteoarthritic changes of the glenoid cavity were excluded. We measured the distance between the medial edge of the spine and the supra-glenoidal tubercle of the glenoid fossa (L 0 ), as well as the distance between this medial point and the most lateral point of the acromion (L max ). Then, the acromial offset = (L max  - L 0 ), in absolute value (mm) and in relative value (% of L max ) were calculated., Results: The absolute average offset is 3.2 cm (SD = 0.4040 cm), the relative average offset is 23.07% (SD = 2.195%). We observed a non-Gaussian distribution of the LOA, with two peaks of distribution of which average and the median offset measurements are situated between these two distributions., Conclusion: This study shows that there are two different morphologies for the scapula, characterized by the lateral offset of their acromion: small or large lateral offset. Clinical implications in shoulder pathology seem important because the resultant of the constraints applied by the deltoid to the joint would favor either rotator cuff tears, or scapulohumeral arthrosis.

Purpose: Our aim was to characterize the morphology of the proximal attachment of the biceps brachii short head. We hypothesize that it has an aponeurotic component that may affect shoulder joint biomechanics., Methods: The coracoacromial region and the biceps brachii muscle were dissected in 30 cadaveric shoulders. The course and dimensions of the tendon and aponeurosis were evaluated. The cross-sectional area of the belly of the short head and the length of the whole muscle were measured. Correlations between the aponeurosis and dimensions of the muscle were tested with the Spearman's rank correlation coefficient., Results: Aponeurosis was present in all specimens, although in 10 cases it was vestigial. The aponeurotic part of the muscle (mean length 90.7 ± 16.3 mm, mean width 12.5 ± 2.9 mm) branched off laterally and traveled to the acromion, blending with the coracoacromial ligament creating the aponeurotic membrane. We named this structure the "superior biceps aponeurosis". The mean length of the biceps brachii was 31.3 ± 2.1 cm and the mean cross-sectional area of the short head was 210.7 ± 54.3 mm 2 . The dimensions of the "superior biceps aponeurosis" correlated positively with the cross-sectional area of the muscle (R 2 from 0.37 to 0.52, p from 0.014 to 0.001)., Conclusion: The origin of the short head of the biceps brachii muscle has a varied aponeurotic component combining the aponeurotic part of the muscle and the aponeurotic membrane. Together, they create the "superior biceps aponeurosis"., Clinical Relevance: The morphology of the origin of the biceps brachii short head is relevant in Bristow/Latarjet procedures. This aponeurotic component may affect the shoulder joint biomechanics after the coracoid process transfer., (Copyright © 2019 Elsevier GmbH. All rights reserved.)

Background: Although acromial morphology is classified as flat, curved, and hooked, whether the morphology is primary or acquired is debated. There have been no investigations on the effect of acromial spurs on acromial morphology. This study therefore aimed to evaluate acromial morphology in relation to spur formation at the anterior edge of the acromion., Materials and Methods: Acromial morphology was investigated in 40 scapulae taken from 20 cadavers (10 male and 10 female), with a median age of 82 years (range 62-97 years). Ink prints of the anteroposterior aspect of the acromion were used to evaluate acromial slope angle and curvature height in relation to spur incidence, length, and shape at the anterior edge of the acromion., Results: Differences were observed in acromial morphology and acromial curvature in relation to acromial spurs (incidence, size, and shape). A hooked acromion was observed as a primary structure in 25% of specimens, which increased to 43% when acromial spurs were involved. No differences were observed in relation to sex or side, while a significant correlation was observed between acromial curvature and the age of the specimens., Conclusion: Acromial spurs increase acromial curvature and therefore change acromion morphology. Nevertheless, it is concluded that a hooked acromion occurs as a primary formed structure., Level of Evidence: Basic science study, anatomy, cadaver dissection.

Objectives: To define a standardised acromial distance (AD) in relaxed, supine position and its cut-point with sensitivity and specificity for classifying pectoralis minor (PMI) shortness. To clarify a predictive value of AD while relaxed, supine (AD2) from AD while sitting (AD1), adjusted by the effect of body mass index (BMI)., Design: Cross-sectional; SETTING: Laboratory of Physical Therapy Faculties., Participants: Eighty-five participants aged 18-38 years., Main Outcome Measures: A standardised-AD was proportionate of AD at scapular retraction (AD3) to AD2. AD1 was clarified as a predictive variable for AD2 in circumstances of adjusted BMI., Results: The cut-point of standardised-AD for PMI shortness was equal to or above 0.61. The sensitivity and specificity were 75.64% and 85.71%. AD2 was 0.355 time of AD1 when adjusted for effect of BMI. This cumulative effect may be able to explain AD2 for 41.4% of the variation in the AD1 and BMI around its mean., Conclusions: Standardised-AD may be suitable to reflect PMI shortness while supine. Application for clinical practise may estimate AD2 from AD1 by summation of the effect of BMI. When designing postural education for correcting PMI shortness while lying, efficacy may be a concern in transfer to upright or functional position., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The causes of degenerative rotator cuff (RTC) tears are unclear but certain acromion morphology may contribute. This study's objective was to determine using a systematic review and meta-analysis the association of acromion type and acromial index with the prevalence of RTC tears. Six databases were searched electronically. Seventeen relevant studies between 1993 and 2017 were included in the meta-analyses determining the association of RTC tears with acromion type (n = 11) or acromial index (n = 10). Effect sizes were calculated as an odds ratio (OR) for the studies reporting acromion type and as raw mean difference (RMD) for the studies reporting acromial index. Meta-analysis was performed using a random-effects model. There was a significant small-to-medium effect found in the meta-analysis for acromion type (overall OR = 2.82, P = 0.000003), indicating an almost three times greater odds for a RTC tear in individuals with a type-III acromion as compared with those with a type-I or -II. A significant effect was also found for acromial index (RMD = 0.071, P < 0.0000001), indicating that a larger acromial index is associated with a greater likelihood of a RTC tear. Because of substantial heterogeneity in RMD for acromial index (Q-df = 92, P < 0.00001; I 2 = 89%), subgroup analyses and meta-regressions were performed. Interestingly, the continent where the study was conducted (i.e., Europe vs. Asia) was the only moderator variable that could explain some of the acromial index heterogeneity. Overall, the findings from our analyses indicate that individuals with either a type-III acromion and/or a larger acromial index have a greater likelihood for non-traumatic RTC tears. Clin. Anat. 32:122-130, 2019. © 2018 Wiley Periodicals, Inc., (© 2018 Wiley Periodicals, Inc.)

Introduction. The acromion is a small section of the scapula which extends anteriorly from the spine of the scapula and the acromial angle (AA) is a prominent bony point at the junction of the lateral border of the acromion and the spine of the shoulder blade. As is well known, the morphology of the acromion and the acromial angle are important as their anatomical variation may contribute to shoulder pathologies. However, few people have studied the morphology and the association between the acromion and the acromial angle. The study explores the acromion and the acromial angle in the anatomical morphology and the association, providing an anatomical basis for clinical diagnosis and treatment. Material and Methods. A total of 292 dry, intact scapulae (152 right, 140 left) were used in the study. Three types of the acromion were already measured, type I(flat shape), type II (curved shape), and type III (hooked shape), respectively. Three types of the acromial angles were also measured in this study, C shape, L shape, and Double Angle shape. Results. The research result shows that C shape and L shape were the most common, while Double Angle shape was the least common. C shape was often related to type I (flat shape) and L shape was often related to type II (curved shape). Conclusions. The presented data provides precise and well-sorted information about the acromion and the acromial angle variation in Chinese population, contributing to diagnosis and treating in shoulder pathology.

Shoulder pain is a common clinical problem affecting most individuals in their lifetime. Despite the high prevalence of rotator cuff pathology in these individuals, the pathogenesis of rotator cuff disease remains unclear. Position and motion related mechanisms of rotator cuff disease are often proposed, but poorly understood. The purpose of this study was to determine the impact of systematically altering glenohumeral plane on subacromial proximities across arm elevation as measures of tendon compression risk. Three-dimensional models of the humerus, scapula, coracoacromial ligament, and supraspinatus were reconstructed from MRIs in 20 subjects. Glenohumeral elevation was imposed on the humeral and supraspinatus tendon models for three glenohumeral planes, which were chosen to represent flexion, scapular plane abduction, and abduction based on average values from a previous study of asymptomatic individuals. Subacromial proximity was quantified as the minimum distance between the supraspinatus tendon and coracoacromial arch (acromion and coracoacromial ligament), the surface area of the supraspinatus tendon within 2 mm proximity to the coracoacromial arch, and the volume of intersection between the supraspinatus tendon and coracoacromial arch. The lowest modeled subacromial supraspinatus compression measures occurred during flexion at lower angles of elevation. This finding was consistent across all three measures of subacromial proximity. Knowledge of this range of reduced risk may be useful to inform future studies related to patient education and ergonomic design to prevent the development of shoulder pain and dysfunction., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Purpose: To evaluate the effect of critical shoulder angle (CSA), acromion index (AI), and glenoid inclination (GI) on the postoperative healing rate after arthroscopic supraspinatus tendon repair., Methods: Patients after arthroscopic repair of a symptomatic, unilateral, single-tendon, full-thickness supraspinatus tear in whom nonoperative management had failed were retrospectively reviewed. Magnetic resonance imaging (MRI) studies were obtained 6 months postoperatively and were evaluated by 2 independent observers. Repair integrity was classified as either intact or torn. Preoperative true anteroposterior radiographs were used to measure CSA, AI, and GI., Results: Fifty-seven patients were evaluated 6 months postoperatively. The mean patient age at surgery was 54.7 ± 7.7 years. On MRI studies, 41 patients (71.9%) had an intact repair and 16 patients (28.1%) had a full-thickness retear. There were no significant differences between the intact and retear group in regard to patient age (P = .648), initial tear size (P = .205), or fatty degeneration (P = .508). The mean CSA for the retear group (37° ± 4°) was significantly higher than that in the intact group (35° ± 3°; P = .014). If the CSA was >38°, the odds ratio of having a retear was 3.78 (95% confidence interval 1.05 to 13.58; P = .042). Average AI for the retear group (0.73 ± 0.09) was significantly higher than that in the intact group (0.69 ± 0.06; P = .049). The mean GI was 17° ± 6° for the intact group and 16° ± 6° for the retear group (P = .739)., Conclusions: At short-term follow-up, higher CSA and AI significantly increased the retear risk after arthroscopic supraspinatus tendon repair. CSA >38° increased the retear risk almost 4-fold. Overall GI was elevated but did not correlate with failure rate., Level of Evidence: III, case control study., (Copyright © 2018 Arthroscopy Association of North America. All rights reserved.)

Purpose: To provide a quantitative and qualitative anatomic analysis of the pectoralis major, teres major, and latissimus dorsi on the humerus, as well as the deltoid tendinous attachments on the proximal humerus and acromion, and to quantitatively characterize the humeral course of the axillary nerve., Methods: Ten nonpaired, fresh-frozen human cadaveric shoulders were analyzed. A portable coordinate-measuring device quantified the location of bony landmarks and tendon attachment areas. The tendon footprints were recorded by tracing their outlines and center points. The footprint areas of the tendons, the distances between the footprint areas and pertinent osseous and soft-tissue landmarks, and the distance between where the axillary nerve courses across the humerus relative to the acromion and greater tuberosity were measured., Results: Of the 10 specimens, 9 (90%) had 5 distinct tendinous bands attaching the deltoid to the acromion; 1 specimen had 4 bands. The distances between the center of the deltoid footprint on the humerus and the centers of the pectoralis major, latissimus dorsi, and teres major tendon footprints on the humerus were 43.5 mm, 58.5 mm, and 49.4 mm, respectively. The shortest distances from the perimeter of the pectoralis major to the latissimus dorsi and teres major tendon footprints were 3.9 mm and 9.5 mm, respectively. The distance from the superior aspect of the greater tuberosity to the axillary nerve on the humeral shaft was 50.3 mm (95% confidence interval, 47.0-53.5 mm). The distance from the lateral acromion to the axillary nerve was 69.3 mm (95% confidence interval, 64.1-74.5 mm)., Conclusions: The deltoid muscle had 4 to 5 tendinous insertions on the acromion, and the axillary nerve was 50.3 mm from the tip of the greater tuberosity. The distance between the lower border of the pectoralis major and the axillary nerve was 9.4 mm., Clinical Relevance: Knowledge of the quantitative anatomy of the tendons of the proximal humerus and axillary nerve can aid in identifying structures of interest during open shoulder surgery and in avoiding iatrogenic axillary nerve injury. Furthermore, this study provides direction to avoid injury to the deltoid tendons during open surgery., (Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Introduction: Understanding the real shape of the undersurface of the acromion prior to acromioplasty is indispensable. Today, Supraspinatus outlet view (SSOV) is a standard view used to determine the shape of the anterior acromion. Three types of acromial undersurface were described by Bigliani and Morrison. The purpose of this study was to find out whether the real acromial type can be visualized on X-ray SSOV and compare the shape of the anterior undersurface of the acromion visualized on SSOV, with the shape revealed on 2D CT reconstructions., Methods: The SSOV X-rays and CT scans of 30 consecutive patients suffering from rotator cuff dysfunction were retrospectively analyzed. The shape of the acromion visualized on plain X-rays was classified according to Bigliani and Morrison classification system. Two-dimensional CT reconstructions were performed, reproducing the lateral, middle, and medial sections of the acromion. The acromial type that was visualized on each of those reconstructions was separately classified according to the Bigliani and Morrison system. A complete profile of the acromial undersurface was constructed from the integration of acromial types seen on each CT section. The acromial morphology seen on X-rays and CTs was compared., Results: A total of 30 patients comprised the study cohort; mean age was 57 (STD = 8.5) years. Three Type I, 22 Type II, and 5 Type III acromions were visualized on the SSOV X-rays. CT reconstructions revealed seven different morphological acromial profiles (I,I,I; I,II,II; I,II,III, etc.), which we divided into 3 groups: (1) Uniform (30%), (2) Internally curved (20%), and (3) Internally hooked (50%). The acromial type visualized on X-ray correlated with the acromial type on at least one CT section in all of the cases. In the case of uniform acromial profile, there is a full correlation between the acromial type visualized on X-rays and the type visualized on CT. In non-uniform profiles, there was an incomplete correlation between the types of the acromion visualized on SSOV and CT. SSOV X-rays correlated with or underestimated, but never overestimated, the acromial morphological type., Discussion: The curved or hooked portion of the acromial undersurface is not always visualized on the SSOV. On X-rays, the middle and lateral sections are seen more accurate than the medial section., Conclusion: Surgeons should be aware that SSOV X-rays may underestimate the true type of the acromial undersurface.

Background: The range of motion of the glenohumeral joint varies substantially among individuals and is dependent on humeral position. How variation in shape of the humerus and scapula affects shoulder axial range of motion at various positions has not been established., Purpose: To quantify variation in the shape of the glenohumeral joint and investigate whether the scapula and humerus geometries affect the axial rotational range of the glenohumeral joint., Study Design: Descriptive laboratory study., Methods: The range of active and passive internal-external rotation of the glenohumeral joint was quantified for 10 asymptomatic participants with optical motion tracking at 60º, 90º, and 120º humeral elevations in the coronal, scapular, and sagittal planes. Bone geometrical parameters were acquired from shoulder magnetic resonance image scans, and correlations between geometrical parameters and maximum internal and external rotations were investigated. Three-dimensional participant-specific models of the humerus and scapula were used to identify collisions between bones at the end of range., Results: Maximum internal and external rotations of the glenohumeral joint were correlated to geometric parameters and were limited by bony collisions. Generally, the active axial rotational range was greater with increased articular cartilage and glenoid curvature, while a shorter acromion resulted in greater passive range. Greater internal rotation was correlated with a greater glenoid depth and curvature in the scapular plane ( r = 0.76, P < .01, at 60° of elevation), a greater subacromial depth in the coronal plane ( r = 0.74, P < .01, at 90° of elevation), and a greater articular cartilage curvature in the sagittal plane ( r = 0.75, P < .01, at 90° of elevation). At higher humeral elevations, a greater subacromial depth and shorter acromion allowed a greater range of motion., Conclusion: The study strongly suggests that specific bony constraints restrict the maximum internal and external rotations achieved in active and passive glenohumeral movement., Clinical Relevance: This study identifies bony constraints that limit the range of motion of the glenohumeral joint. This information can be used to predict full range of motion and set patient-specific rehabilitation targets for those recovering from shoulder disorders. It can improve positioning and choice of shoulder implants during preoperative planning by considering points of collision that could limit range of motion.

Purpose: Recent techniques for acromioclavicular (AC) joint reconstruction focus on additional AC cerclage to coracoclavicular (CC)-reconstructions. Due to the specific slim bone morphology at the acromion, there are concerns regarding these additional bone tunnels, as they may predispose to fracture and break out. The purpose of this study was to investigate anatomic properties of the acromion which may help improve surgical techniques directed at injuries to the AC joint. It was hypothesized that via measurements of thickness and density points of increased strength and support could be identified on the acromion., Methods: Eighty-five fresh frozen cadaveric shoulders were used for this study. A standardized 3D-net was developed and thicknesses of the acromion were taken from defined points using a certified caliper. To define the acromial arch, the angle and radius of curvature between the antero-lateral, the highest point of the acromial arch and the postero-lateral aspect of the acromion were measured. Additional bone mineral density (BMD) evaluation was performed on 43 specimens in an anterio-posterior and latero-medial direction using 5-mm slices with a maximum of 10 and 6 slices, respectively., Results: Median specimen age was 63.0 (range 36) years (55 female, and 30 male). There was no statistical significance between male (62.0, range: 35 years) and female (64.5, range 32 years) regarding age (n.s.). Thickness of acromion points of interest were ranging from 3.5 to 24.3 mm. Median radius of curvature of acromial arch for female was 48.2 (range 92.7) mm and 66.2 (range 85.6) for male (p = 0.019). The median angle for female specimens was 21.4° (range: 44.6°) and 23.3° (range 51.7°) for male (p = 0.047). The latero-medial measurements showed significant difference between the region of interest (ROI): 1 and 4, 5, 6 (p = 0.001, p = 0.001, p = 0.001), 2 and 4, 5, 6 (p = 0.007, p = 0.001, p = 0.001), 3 and 5, 6 (p = 0.001, p = 0.001), 4 and 5, 6 (p = 0.010, p = 0.001). Antero-posterior measurements showed significant difference between the ROI: 1 and 8 (p = 0.031)., Conclusion: The posterior-medial acromion close to the AC joint revealed the highest BMD with an increasing density from lateral to medial. In combination with thickness measurements this region would support additional anatomical fixation of the AC joint using bone tunnels if necessary., Clinical Relevance: To anatomically reproduce the insertions of the AC ligaments at the acromion, either bone tunnels or anchors are needed. Therefore, several techniques have been developed. This study provides the anatomical data for these techniques and confirms the reconstructive approach of techniques using anatomical points of fixation and orientation.

Objectives: To investigate inter-rater reliability of a set of shoulder measurements including inclinometry [shoulder range of motion (ROM)], acromion-table distance and pectoralis minor muscle length (static scapular positioning), upward rotation with two inclinometers (scapular kinematics) and pain pressure thresholds (muscle tenderness) in middle-aged women., Design: Observational study., Participants: Thirty symptom-free middle-aged women (first cohort) were measured by two raters. All measurements with an intraclass correlation coefficient (ICC) below 0.75 were retested after an additional training period in a second cohort of 30 symptom-free middle-aged women., Main Outcome Measures: Inter-rater reliability of all variables was measured with the ICC (95% confidence interval) and standard error of measurement (SEM)., Results: Acromion-table distance (ICC=0.91, SEM 0.22 to 0.28% of body length), pectoralis minor muscle length (ICC=0.91, SEM 0.16% of body length), pain pressure thresholds (ICC=0.78 to 0.85, SEM 0.39 to 0.70kg) and abduction ROM (ICC=0.77, SEM 5°) showed good to excellent inter-rater reliability in the first cohort. After an additional training period, forward flexion ROM showed good inter-rater reliability (ICC=0.83, SEM 5°), scapular upward rotation in resting position showed moderate reliability (ICC=0.52, SEM 2°), and other scaption angles showed weak reliability (ICC=0.26 to 0.43, SEM 3 to 8°)., Conclusions: In a battery of clinical tools to evaluate factors contributing to shoulder pain, static scapular positioning and pressure pain thresholds were found to have good to excellent inter-rater reliability in middle-aged women. Additional training is recommended for measurements with a gravity inclinometer., (Copyright © 2016 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.)

Objectives: To evaluate the effect of isometric shoulder extension in 90° shoulder flexion on the acromio-humeral distance, to establish the force required to achieve a clinically important increase in the acromio-humeral distance, and to investigate the practicality and reliability of real-time ultrasound measurement of the acromio-humeral distance in 90° shoulder forward flexion., Design: Prospective single-group intervention., Setting: King's College London, Guy's Campus., Participants: Twenty healthy volunteers [five males and 15 females (40 shoulders)] with a mean age of 32 (standard deviation 10, range 19 to 55) years were recruited from the faculty and staff at King's College London., Interventions: The acromio-humeral distance in asymptomatic participants was measured using real-time ultrasound in the neutral position at rest, at 90° shoulder flexion at rest, and while performing an isometric pull-down exercise at 100%, 50%, 30% and 10% maximal voluntary isometric contraction., Main Outcome Measures: Real-time ultrasound measures of the acromio-humeral distance., Results: Of the 20 participants, 38 shoulders were imaged. In 90° shoulder flexion, pull-down exercises at all levels of force increased the acromio-humeral distance compared with no pull-down (P<0.05), but this was only clinically significant in males. Measures had excellent short-term intra-operator reliability., Conclusions: Isometric pull-down exercises lead to an increase in the acromio-humeral distance in asymptomatic males that may be clinically important, and therefore may be an appropriate exercise for patients with shoulder pathology. Ultrasound measurement of the acromio-humeral distance in 90° shoulder flexion is practical and reliable., (Copyright © 2016 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.)

Background: Among the many causes of rotator cuff tears, scapular morphology is associated with the accelerating degenerative process of the rotator cuff. Acromion index (AI) was previously introduced and compared in two populations., Methods: We enrolled 100 Korean patients diagnosed with full-thickness rotator cuff tears by magnetic resonance imaging and intraoperative arthroscopic findings between January and December 2013. Another 100 Korean patients with an intact rotator cuff tendon identified on magnetic resonance imaging and other shoulder diseases, such as frozen shoulder and instability, were enrolled as controls. We retrospectively compared these 100 rotator cuff tear patients (mean age, 63 years) and 100 controls (mean age, 51 years) in this study. Two independent orthopedic surgeons assessed the AI on radiographs. We performed an interobserver reliability test of the AI assessment, and then compared the AI between two groups., Results: The measurement of the AI showed excellent reliability (intraclass correlation coefficient, 0.82). The mean AI in the rotator cuff tear group was 0.68 and it was significantly different between groups ( p <0.001, 95% confidence interval). The AI was not related to tear size., Conclusions: Our study showed that the AI was an effective predictive factor for rotator cuff tears in a Korean population., Competing Interests: CONFLICT OF INTEREST: No potential conflict of interest relevant to this article was reported.

This study explored the radiographic and anatomical differences in normal shoulders between men and women, as well as factors such as race, height, weight, and age. A total of 205 patients with documented normal anatomical radiographs comprised the study population. Five fellowship-trained orthopedic surgeon reviewers measured head diameter, humeral head size, head to tuberosity distance, greater tuberosity width, neck-shaft angle, surface-arc angle, glenoid neck length, and distance from the lateral acromion process to the greater tuberosity on anteroposterior radiographs with the shoulder in external rotation. After the reviewers identified and marked defined anatomical landmarks, a comprehensive automated calculator was used to compute all parameters. Between men and women, head diameter (P<.001), humeral head size (P<.001), greater tuberosity width (P<.001), distance from the lateral acromion process to the greater tuberosity (P<.001), and glenoid neck length (P<.001) were significantly different, whereas race was not significantly different for any anatomical parameter. Using Spearman's rho, there was a strong correlation between head diameter/humeral head height and height (r s =0.77/r s =0.68), weight (r s =0.62), and greater tuberosity width (r s =0.66/r s = 0.61); there also was a strong negative correlation between head to tuberosity distance and neck-shaft angle (r s =-0.80). This study demonstrated precisely defined proximal humeral anatomical relationships and sizes using an advanced standardized imaging software program. With these data, orthopedic surgeons and implant designers can better understand the anatomy and glenohumeral relationships to re-create when performing total shoulder arthroplasty. [Orthopedics. 2017; 40(3):155-160.]., (Copyright 2017, SLACK Incorporated.)

Study Objective: To assess the usefulness of the new NEMA (Neck Circumference Minus Acromion-Acromion Distance) parameter, in preoperative identification of patients' difficult intubation and compare it with other commonly used scales and tests., Design: Prospective study., Setting: District Specialist Hospital of Lublin, Poland., Patients: Six hundreds twenty-nine patients underwent nonemergency surgical interventions., Measurements: The NEMA parameter was confronted with: Modified Mallampati classification, TMD, RHTMD, NC, MPND, SMD, I-I D, A-AD, and medical history of difficult intubation and diagnosed obstructive sleep apnea syndrome or snoring., Main Results: Higher medians of NEMA and Mallampati parameters were reported in patients with difficult intubation. AUC for Mallampati parameter was 0.733 while the NEMA parameter's AUC was 0.625. Sensitivity and specificity for Mallampati and NEMA parameter were respectively 0.79; 0.55 and 0.42; 0.75. Significantly higher MPN, RHTMD, Mallampati, and NEMA parameter were observed in patients in whom the BURP was used. Easy intubation occurs more frequently in patients with a history of OSAS or snoring than in those with difficult intubation., Conclusion: It seems that none of the known bedside tests for predicting difficult intubation have a discriminating power sufficient for clinicians. Our study draws attention to a novel parameter, called NEMA, which appears to be a strong predictor of DEI, especially in combination with the Mallampati scale., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Objective: The aims were to study the acromion parameters in the population and to assess the extremity or sex variation in the acromion morphology., Methods: The lateral acromion angle (LAA) and the acromion index (AI) were assessed in a computed tomographic scan database of 250 individuals in the age group of 20 to 49 years. For the analysis of LAA and AI, 286 and 234 shoulders were available, respectively., Results: The LAA was 73.6 ± 6.6 degrees; 73.7 ± 6.9 and 72.5 ± 6.1 degrees for the right and left shoulder, respectively. The AI was 0.755 ± 0.12; 0.82 ± 0.12 and 0.69 ± 0.12 for the left and the right shoulder, respectively. The AI of the right shoulder was significantly different between the 2 sexes (P = 0.04). The difference in the AI and the LAA of the right and left shoulders was significant (P < 0.0001, P = 0.04)., Conclusions: The morphology of the acromion differs between the right and the left shoulders as well as between sexes.

Introduction: Many clinical anatomy studies have looked into how variations in the acromion, coracoacromial ligament (CAL) and subacromial space are associated with rotator cuff injuries. However, no study up to now had defined anatomically the fibro-osseous canal that confines the supraspinatus muscle in the subcoracoacromial space. Through an anatomical study of the scapula, we defined the bone-related parameters of this canal and its anatomical variations., Materials and Methods: This study on dry bones involved 71 scapulas. With standardised photographs in two orthogonal views (superior and lateral), the surface area of the subcoracoacromial canal and the anatomical parameters making up this canal were defined and measured using image analysis software. The primary analysis evaluated the anatomical parameters of the canal as a function of three canal surface area groups; the secondary analysis looked into how variations in the canal surface area were related to the type of acromion according to the Bigliani classification., Results: Relative to glenoid width, the group with a large canal surface area (L) had significantly less lateral overhang of the acromion than the group with a small canal surface area (S), with ratios of 0.41±0.23 and 0.58±0.3, respectively (P=0.04). The mean length of the CAL was 46±8mm in the L group and 39±9mm in the S group (P=0.003). The coracoacromial arch angle was 38°±11° in the L group and 34°±9° in the S group; the canal surface area was smaller in specimens with a smaller coracoacromial arch angle (P=0.20)., Conclusion: Apart from acromial morphology, there could be innate anatomical features of the scapula that predispose people to extrinsic lesions to the supraspinatus tendon (lateral overhang, coracoacromial arch angle) by reducing the subcoracoacromial canal's surface area., Level of Evidence: Anatomical descriptive study., (Copyright © 2016 Elsevier Masson SAS. All rights reserved.)

Background: Subacromial space distance and forward head and shoulder posture are common characteristics resulting from swim training. These alterations can cause abnormal scapular kinematics and positioning, potentially increasing compression of structures in the subacromial space and increasing the risk for the development of swimmer's shoulder., Purpose: To evaluate the effect of the swim training season on subacromial space distance and forward head and forward shoulder posture as well as to determine the relationship between these variables., Study Design: Cohort study; Level of evidence, 2., Methods: Included in the study were 43 competitive adolescent swimmers and 29 nonoverhead adolescent athletes (controls) who were not currently experiencing any shoulder, neck, or back pain that limited their participation in sports activity. All participants were evaluated 3 times: once before the start of the swim training season and then at 2 follow-up sessions 6 and 12 weeks after the initial testing session. At each testing session, each participant completed a physical examination that included evaluation of posture and subacromial space distance., Results: Swimmers had significantly greater decreases in subacromial space distance during the training season compared with nonoverhead athletes. Swimmers also demonstrated significantly greater increases in forward shoulder posture compared with nonoverhead athletes. A significant relationship was noted between changes in forward shoulder posture and changes in subacromial space distance from the baseline testing session to the assessment 6 weeks after baseline assessment. As forward shoulder posture increased, subacromial space significantly decreased., Conclusion: Because of their training load, swimmers experience a decrease in subacromial space distance and an increase in forward shoulder posture over the course of 12 weeks of training, potentially making these athletes more vulnerable to the development of shoulder pain and injury., (© 2016 The Author(s).)

Background: Several biomechanical studies have shown that the acromioclavicular (AC) ligament prevents posterior translation of the clavicle in the horizontal plane. In anatomy textbooks, however, the AC ligament is illustrated as running straight across the AC joint surface., Hypothesis: The AC ligament does not run straight across the joint surface, and the configuration of the AC ligament may vary., Study Design: Descriptive laboratory study., Methods: We used 16 pairs of shoulder girdles in this study. After identifying the AC ligament, we macroscopically investigated the orientation and attachment of the ligament and measured the angle between the ligament and the line perpendicular to the AC joint surface by using a digital goniometer. In addition, the AC joint inclination angle was measured, and the Spearman rank correlation coefficient between the joint inclination and the ligament angle was calculated. Finally, we sought to classify the AC ligament based on its configuration. Of the 16 pairs of specimens, 3 pairs of shoulders were histologically examined., Results: The AC ligament was divided into 2 parts: a bundle at the superoposterior (SP) part and a bundle at the anteroinferior (AI) part of the joint. The well-developed SP bundle was consistent and ran obliquely at an average ± SD 30° ± 6° in relation to the AC joint surface, from the anterior part of the acromion to the posterior part of the distal clavicle. The joint inclination was 70° ± 12°, and a negative moderate correlation was found between the joint inclination and the ligament angle (P = .02, r = -0.46). In comparison, the AI bundle was thin and narrow, and it could be categorized into 3 types according to its various configurations., Conclusion: The AC ligament could be separated into the SP bundle and the AI bundle. The SP bundle ran posteriorly toward the distal clavicle from the acromion at an average angle of 30° to the joint surface., Clinical Relevance: Anatomic reconstruction, based on the current findings in combination with findings regarding the coracoclavicular ligament, could facilitate improved outcome in the treatment of AC joint disruption., (© 2016 The Author(s).)