Search

Benzo[d]-X-zolyl-pyridinyl (XO, S, NH) radicals represent a promising class of redox-active molecules for organic batteries. We present a multistep screening procedure to identify the most promising radical candidates. Experimental investigations and highly correlated wave function-based calculations are performed to determine benchmark redox potentials. Based on these, the accuracies of different methods (semi-empirical, density functional theory, wave function-based), solvent models, dispersion corrections, and basis sets are evaluated. The developed screening procedure consists of three steps: First, a conformer search is performed with CREST. The molecules are selected based on the redox potentials calculated using GFN2-xTB. Second, HOMO energies calculated with reparametrized B3LYP-D3(BJ) and the def2-SVP basis set are used as selection criteria. The final molecules are selected based on the redox potentials calculated from Gibbs energies using BP86-D3(BJ)/def2-TZVP. With this multistep screening approach, promising molecules can be suggested for synthesis, and structure-property relationships can be derived., (© 2024 The Authors. Journal of Computational Chemistry published by Wiley Periodicals LLC.)

This study analyzes the samarium diiodide-promoted cyclizations of 5-arylpentan-2-ones to dearomatized bicyclic products utilizing density functional theory. The reaction involves a single electron transfer to the carbonyl group, which occurs synchronously with the rate determining cyclization event, and a second subsequent proton-coupled electron transfer. These redox reactions are accurately computed employing small core pseudo potentials explicitly involving all f-electrons of samarium. Comparison of the energies of the possible final products rules out thermodynamic control of the observed regio- and diastereoselectivities. Kinetic control via appropriate transition states is correctly predicted, but to obtain reasonable energy levels the influence of the co-solvent hexamethylphosphortriamide has to be estimated by using a correction term. The steric effect of the bulky samarium ligands is decisive for the observed stereoselectivity. Carbonyl groups in para-position of the aryl group change the regioselectivity of the cyclization and lead to spiro compounds. The computations suggest again kinetic control of this deviating outcome. However, the standard mechanism has to be modified and the involvement of a complex activated by two SmI 2 moieties is proposed in which two electrons are transferred simultaneously to form the new C-C bond. Computation of model intermediates show the feasibility of this alternative+ mechanism., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Sustainability is one of the hot topics of today's research, in particular when it comes to energy-storage systems such as batteries. Redox-active molecules implemented in organic batteries represent a promising alternative to lithium-ion batteries, which partially rely on non-sustainable heavy metal salts. As an alternative, we propose benzothiazole, -oxazole and -imidazole derivatives as redox-active moieties for polymers in organic (radical) batteries. The target molecules were identified by a combination of theoretical and experimental approaches for the investigation of new organic active materials. Herein, we present the synthesis, electrochemical characterization and theoretical investigation of the proposed molecules, which can later be introduced into a polymer backbone and used in organic polymer batteries., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

A class of adamantane-like molecular materials attracts attention because they exhibit an extreme non-linear optical response and emit a broad white-light spectrum after illumination with a continuous-wave infrared laser source. According to recent studies, not only the nature of the cluster molecules, but also the macroscopic structure of the materials determines their non-linear optical properties. Here we present a systematic study of cluster dimers of the compounds AdR 4 and [(RT) 4 S 6 ] (T = Si, Ge, Sn) with R = methyl, phenyl or 1-naphthyl to gain fundamental knowledge about the interactions in the materials. For all compounds, a similar type of dimer structures with a staggered arrangement of substituents was determined as the energetically most favorable configuration. The binding energy between the dimers, determined by including London dispersion interactions, increases with the size of the core and the substituents. The cluster interactions can be classified as substituent-substituent-dominated (small cores, large substituents) or core-core-dominated (large cores, small substituents). Among various possible dimer conformers, those with small core-core distances are energetically preferred. Trimer and tetramer clusters display similar trends regarding the minimal core-core distances and binding energies. The much lower energy barrier determined for the rotation of substituents as compared to the rotation of the cluster dimers past each other indicates that the rotation of substituents more easily leads to different conformers in the material. Thus, understanding the interaction of the cluster dimers allows an initial assessment of the interactions in the materials., (© 2022 The Authors. Journal of Computational Chemistry published by Wiley Periodicals LLC.)

Samarium diiodide is a versatile single electron transfer (SET) agent with various applications in organic chemistry. Lewis structures regularly insinuate the existence of a ketyl radical when samarium diiodide binds a carbonyl group. The study presented here investigates this electron transfer by the means of computational chemistry. All electron CASPT2 calculations with the inclusion of scalar relativistic effects predict an endotherm electron transfer from samarium diiodide to acetone. Energies calculated with the PBE0-D3(BJ) functional and a small core pseudopotential are in good agreement with CASPT2. The calculations confirm the experimentally measured increase of the samarium diiodide reduction potential through the addition of hexamethylphosphoramide also known as HMPA.

The synthesis of novel tunable electroactive species remains a key challenge for a wide range of chemical applications such as redox catalysis, energy storage, and optoelectronics. In recent years, polyoxovanadate (POV) alkoxide clusters have emerged as a new class of compounds with highly promising electrochemical applications. However, our knowledge of the formation pathways of POV alkoxides is rather limited. Understanding the speciation of POV alkoxides is fundamental for controlling and manipulating the evolution of transient species during their nucleation and therefore tuning the properties of the final product. Here, we present a computational study of the nucleation pathways of a mixed-valent [(V V 6- n V IV n O 6 )(O)(O-CH 3 ) 12 ] (4- n )+ POV alkoxide cluster in the absence of reducing agents other than methanol.

In this Forum Article, we review the development of chelating borohydride ligands called aminodiboranates (H 3 BNR 2 BH 3 - ) and phosphinodiboranates (H 3 BPR 2 BH 3 - ) for the synthesis of trivalent f-element complexes. The advantages and history of using mechanochemistry to prepare molecular borohydride complexes are described along with new results demonstrating the mechanochemical synthesis of M 2 (H 3 BP t Bu 2 BH 3 ) 6 , where M = U, Nd, Tb, Er, and Lu ( 1 - 5 ). Multinuclear NMR, IR, and single-crystal X-ray diffraction data are reported for 1 - 5 alongside complementary density functional theory calculations to reveal differences in their structure and reactivity with and without tetrahydrofuran. The results demonstrate how mechanochemistry can be used to access f-element complexes with chelating borohydrides in improved and reproducible yields, which is an important step toward investigating the properties of lanthanide and actinide phosphinodiboranate complexes with different phosphorus substituents. The relevance of these results is contextualized by a discussion of structural factors known to influence the volatility of f-element borohydrides and applications that require the development of volatile f-element complexes.

Room temperature ionic liquids (RTILs) are solvent-free liquids comprised of densely packed cations and anions. The low vapor pressure and low flammability make ILs interesting for electrolytes in batteries. In this work, a new class of ionic liquids were formed for rechargeable aluminum/graphite battery electrolytes by mixing 1-methyl-1-propylpyrrolidinium chloride (Py13Cl) with various ratios of aluminum chloride (AlCl 3 ) (AlCl 3 /Py13Cl molar ratio = 1.4 to 1.7). Fundamental properties of the ionic liquids, including density, viscosity, conductivity, anion concentrations and electrolyte ion percent were investigated and compared with the previously investigated 1-ethyl-3-methylimidazolium chloride (EMIC-AlCl 3 ) ionic liquids. The results showed that the Py13Cl-AlCl 3 ionic liquid exhibited lower density, higher viscosity and lower conductivity than its EMIC-AlCl 3 counterpart. We devised a Raman scattering spectroscopy method probing ILs over a Si substrate, and by using the Si Raman scattering peak for normalization, we quantified speciation including AlCl 4 - , Al 2 Cl 7 - , and larger AlCl 3 related species with the general formula (AlCl 3 ) n in different IL electrolytes. We found that larger (AlCl 3 ) n species existed only in the Py13Cl-AlCl 3 system. We propose that the larger cationic size of Py13 + (142 Å 3 ) versus EMI + (118 Å 3 ) dictated the differences in the chemical and physical properties of the two ionic liquids. Both ionic liquids were used as electrolytes for aluminum-graphite batteries, with the performances of batteries compared. The chloroaluminate anion-graphite charging capacity and cycling stability of the two batteries were similar. The Py13Cl-AlCl 3 based battery showed a slightly larger overpotential than EMIC-AlCl 3 , leading to lower energy efficiency resulting from higher viscosity and lower conductivity. The results here provide fundamental insights into ionic liquid electrolyte design for optimal battery performance., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Due to its high specific and volumetric capacity and relatively low operation potential, silicon (Si) has attracted much attention to be utilized as a high-capacity anode material for lithium-ion batteries (LIBs) with increased energy density. However, the application of Si within commercial LIBs is still hindered by its poor cycling stability related to the huge volume changes of Si upon lithiation/delithiation, followed by continuous electrolyte decomposition and active lithium loss at the anode side. In this work, we present the application of pentafluorophenyl isocyanate (PFPI) as an effective electrolyte additive for lithium-ion full cells, containing a pure, magnetron-sputtered Si anode and a LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC-111) cathode. The performance of the Si/NMC-111 full cells is significantly improved in terms of capacity retention and Coulombic efficiency by the addition of 2 wt % PFPI to the baseline electrolyte and is compared to the well-known additives vinylene carbonate and fluoroethylene carbonate. Furthermore, it is revealed that the additive is able to reduce the active lithium losses by forming an effective solid-electrolyte interphase (SEI) on the Si anode. X-ray photoelectron spectroscopy investigations unveil that PFPI is a main part of the SEI layer, leading to less active lithium immobilized within the interphase. Overall, our results pave the path for a broad range of different isocyanate compounds, which have not been studied for Si-based anodes in lithium-ion full cells so far. These compounds can be easily adjusted by modifying the chemical structure and/or functional groups incorporated within the molecule, to specifically tailor the SEI layer for Si-based anodes in LIBs.

A detailed model for the reaction mechanism of the samarium diiodide (SmI 2 ) mediated reductive coupling of N-oxoalkyl-substituted methyl indole-3-carboxylates is developed in this study by determining the Gibbs energies for the intermediates of possible reaction pathways. The Gibbs energies at ambient temperature are calculated with dispersion corrected density functional theory in combination with implicit (D-COSMO-RS) and explicit solvent description. Temperature dependent ro-vibrational contributions are considered with the help of statistical thermodynamics. In contrast to previous proposals for the reaction mechanism, the high diastereoselectivity in the cyclization is found to be due to the formation of an energetically highly favorable chelate complex in which the final relative configuration is already preformed. After cyclization and a second electron transfer, alkylation of the resulting anion takes place under kinetic control from the more "open" face whereas protonation is under thermodynamic control. The calculations are in good agreement with these experimental findings. © 2017 Wiley Periodicals, Inc., (© 2017 Wiley Periodicals, Inc.)

Rigidity and preorganisation are believed to be required for high affinity in multiply bonded supramolecular complexes as they help reduce the entropic penalty of the binding event. This comes at the price that such rigid complexes are sensitive to small geometric mismatches. In marked contrast, nature uses more flexible building blocks. Thus, one might consider putting the rigidity/high-affinity notion to the test. Multivalent crown/ammonium complexes are ideal for this purpose as the monovalent interaction is well understood. A series of divalent complexes with different spacer lengths and rigidities has thus been analysed to correlate chelate cooperativities and spacer properties. Too long spacers reduce chelate cooperativity compared to exactly matching ones. However, in contrast to expectation, flexible guests bind with chelate cooperativities clearly exceeding those of rigid structures. Flexible spacers adapt to small geometric host-guest mismatches. Spacer-spacer interactions help overcome the entropic penalty of conformational fixation during binding and a delicate balance of preorganisation and adaptability is at play in multivalent complexes., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Donor-acceptor materials with small HOMO-LUMO gaps are important in molecular electronics, but are often difficult to synthesise. A simple and efficient way to position tetrathiafulvalene (TTF) as the donor and naphthalene diamide (NDI) as the acceptor in close proximity to each other in a divalent crown/ammonium pseudo[2]rotaxane is presented. The divalent design provides high chelate cooperativity and much stronger binding compared with a monovalent analogue. The pseudo[2]rotaxane was then doubly interlocked by stoppering it in a catalyst-free 1,3-dipolar cycloaddition. UV/Vis and cyclic voltammetry experiments with the resulting [2]rotaxane revealed the optoelectronic properties of an intramolecular charge transfer with a small HOMO-LUMO energy gap. Redox-switching experiments showed the rotaxane to be pentastable. DFT calculations provided insights into the electronic structures of the five redox states., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A thorough thermodynamic analysis by isothermal titration calorimetry of allosteric and chelate cooperativity effects in divalent crown ether/ammonium complexes is combined with DFT calculations including implicit solvent on the one hand and large-scale molecular dynamics simulations with explicit solvent molecules on the other. The complexes studied exhibit binding constants up to 2×10 6  m -1 with large multivalent binding enhancements and thus strong chelate cooperativity effects. Slight structural changes in the spacers, that is, the exchange of two ether oxygen atoms by two isoelectronic methylene groups, cause significantly stronger binding and substantially increased chelate cooperativity. The analysis is complemented by the examination of solvent effects and allosteric cooperativity. Such a detailed understanding of the binding processes will help to efficiently design and construct larger supramolecular architectures with multiple multivalent building blocks., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The Gibbs energies of association ΔGsolT between primary alkyl ammonium ions and crown ethers in solution are measured and calculated. Measurements are performed by isothermal titration calorimetry and revealed a strong solvent-dependent ion pair effect. Calculations are performed with density functional theory including Grimme's dispersion correction D3(BJ). The translational, rotational, and vibrational contributions to the Gibbs energy of association ΔGsolT are taken into account by a rigid-rotor-harmonic-oscillator approximation with a free-rotor approximation for low lying vibrational modes. Solvation effects δGseT are taken into account by applying the continuum solvation model COSMO-RS. Our study aims at finding a suitable theoretical method for the evaluation of the host guest interaction in crown/ammonium complexes as well as the observed ion pair effects. A good agreement of theory and experiment is only achieved, when solvation and the effects of the counterions are explicitly taken into account., (© 2015 Wiley Periodicals, Inc.)

The ability of an E-configured azobenzene guest to undergo photoisomerisation is controlled by the presence of a complementary host. Addition of base/acid allowed for a weakening/strengthening of the interactions in the divalent pseudo[2]rotaxane complex and hence could switch on/off photochromic activity.

The Gibbs energies of association (Gibbs free (binding) energies) for divalent crown-8/ammonium pseudorotaxanes are determined by investigating the influence of different linkers onto the binding. Calculations are performed with density functional theory including dispersion corrections. The translational, rotational and vibrational contributions are taken into account and solvation effects including counter ions are investigated by applying the COSMO-RS method, which is based on a continuum solvation model. The calculated energies agree well with the experimentally determined ones. The shortest investigated linker shows an enhanced binding strength due to electronic effects, namely the dispersion interaction between the linkers from the guest and the host. For the longer linkers this ideal packing is not possible due to steric hindrance.