Search

The integration of 3D printing and design technologies into the fashion industry has created new opportunities for customization and flexibility in apparel production. These innovations enable faster creation of new clothing models and allow designers to experiment with unique designs, distinguishing themselves from conventional mass production. However, the widespread adoption of 3D-printed clothing faces limitations due to the rigidity of current materials, which impacts flexibility and comfort. Despite these challenges, designers like Iris van Herpen and Victoria Beckham have successfully incorporated 3D-printed elements into high-fashion collections, highlighting the technology's artistic potential. Current applications are primarily found in accessories and avant-garde designs, where rigidity poses fewer issues. The future of 3D printing in fashion lies in personalized, eco-friendly production with further advancements in material science and cost reductions. [ABSTRACT FROM AUTHOR]

Sport companies offer a diversity in compression garments according to its purpose. Athletes use these garments to recover/improve their performance. However, literature shows controversy at their results and companies offer a wide range of products. The aim of this study was to analyse the current sport compression stockings market in compression, size, and properties. Seventeen commercial brands offering compression sport stockings were examined and the principal claims were to improve performance (n = 43), recovery (n = 10) and combination of performance and recovery (n = 13). Sizes, compression values, and type of compression (gradual or uniform) varies among brands, and between different models at the same brand. The most reported properties in the sport compression market are protection, followed by comfort, blood flow and breathability. While the least claimed properties in the sport compression market are delayed onset muscle soreness mitigation, thermoregulation (freshness-preserving and warmth-retaining insulation), and risk of injury reduction. The lack of information observed in the compression stockings market and the heterogeneity in test procedures, types, and levels of compression in the literature makes the comparison between products difficult. Greater rigor when analysing garments and their effects is required at the claims of the companies in their products.

Copyright of Arab International Journal of Digital Art & Designs is the property of Arab Institution of Knowledge Management and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Sport companies offer a diversity in compression garments according to its purpose. Athletes use these garments to recover/improve their performance. However, literature shows controversy at their results and companies offer a wide range of products. The aim of this study was to analyse the current sport compression stockings market in compression, size, and properties. Seventeen commercial brands offering compression sport stockings were examined and the principal claims were to improve performance (n = 43), recovery (n = 10) and combination of performance and recovery (n = 13). Sizes, compression values, and type of compression (gradual or uniform) varies among brands, and between different models at the same brand. The most reported properties in the sport compression market are protection, followed by comfort, blood flow and breathability. While the least claimed properties in the sport compression market are delayed onset muscle soreness mitigation, thermoregulation (freshness-preserving and warmth-retaining insulation), and risk of injury reduction. The lack of information observed in the compression stockings market and the heterogeneity in test procedures, types, and levels of compression in the literature makes the comparison between products difficult. Greater rigor when analysing garments and their effects is required at the claims of the companies in their products. [ABSTRACT FROM AUTHOR]

This article examines the influence of pointalism on the work of contemporary fashion designers. Examples from different authors are examined and an attempt is made to compare their works. The role of current in the formation of modern trends in fashion design is analyzed.. [ABSTRACT FROM AUTHOR]

Objective: This article aims to review the safety and efficacy of the Er:YAG laser in debonding dental accessories. Methods: This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Articles published between 2010 and 2022 on the removal of dental accessories using erbium laser were searched. The selected articles were then classified according to the accessories used: adhesives, brackets, restorations, or implant crowns. Enamel surface roughness, shear bond strength, adhesive remnant index, duration time (t), pulp chamber temperature (T), morphology (M), and other variables were then noted. Results: The dental accessories and adhesives used were described along with the laser parameters used, such as frequency, pulse width, irradiation time, scanning mode, water-air cooling, and other variables. Conclusions: Laser removal using Er:YAG laser of dental accessories such as brackets, crowns, and veneers is fundamentally safe, time-saving, and does not cause damage to the enamel nor the underlying dentin. However, there was no distinct advantage with laser removal seen, such as those residual adhesives of brackets on the tooth surface and temporary adhesives of restorations. [ABSTRACT FROM AUTHOR]

Copyright of Humanitas: International Journal of Social Sciences / Uluslararasi Sosyal Bilimler Dergisi is the property of Humanitas: International Journal of Social Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Cuadernos del Centro de Estudios de Diseño y Comunicación is the property of Cuadernos del Centro de Estudios de Diseno y Comunicacion and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The paper provides practical information on the process of valorization of textile waste. Different types of products are made from industrial and consumer waste, such as redesigned clothing, women's accessories, bags, women's purses, etc. The work presents the way of making several small accessories, respectively necklace models and earrings, made from the waste resulted in the workshop. The authors chose to make denim accessories because as we know denim is a type of fabric, usually made of cotton, and cotton is a vegetable fiber. Cotton fabrics are versatile, with good durability, breathable, hypoallergenic, with very good capacity of retaining dyes, with good resistance to abrasion, all this making it a material preferred by those who make accessories, because it provides wearing comfort. Unlike other textiles, cotton lets the skin breathe, especially during warm periods, thus naturally preventing the appearance of sweat. Both the necklace and the earrings are made from a piece of material extracted from denim waste. It was unfolded and checked from an aesthetic and qualitative point of view, on the grounds of texture and uniformity of color, then strips of material were cut out, which were assembled piece by piece, twisted, glued, and at the end for added value, decorative elements were applied.

This paper Techno-economic design of a standalone solar PV system with case study, TY Danjuma conference building, Rivers State University (RSU) Port-Harcourt provides alternative electric power services to the building. The area or building under consideration uses the off-grid power generation model having identified the inadequacy and irregular power supply which causes man-hour loss during the working period. There is enough solar energy to generate emission-free power. In literature, it has been seen that researchers are advocating for the utilization of these abundant natural resources to generate power. The long-run operational benefits cannot be neglected. To achieve the aim and objectives of this research, an analytical (components-wise) method was adopted. The various components required to provide green energy services were thoroughly and chronologically computed. The analysis provides specifications for the components as mentioned in the materials section and concerning the load demanded. Without a thorough load audit, the required solar PV and its delivery gadgetry would not be adequate. Hence, load survey, assumption and design calculations, etc., to achieve the 42kWp with 140 numbers of panels; 48 numbers of 200Ah, 12V deep cycle batteries, 25kVA inverter (or with two sets of inverters, 15kVA and 10kVA, 48Vdc/220Vac), 6 numbers of 150Amp, 48V solar charge controllers or a single 900Amp,48V solar charge controller was evaluated. The specification evaluated and presented was based on the load computed and the prevailing market for available components. From the techno-economic viewpoint of using solar-powered systems or diesel-powered generators, it was obvious that the solar-powered system has many more advantages in terms of daily, monthly or yearly running and maintenance costs as comparable to diesel-generator systems. Thus, it will be interesting to note that adequate utilization of renewable energy for electricity generation will be the best practice in the socioeconomic development of a state or a nation.

Gastrointestinal (GI) endoscopy is among the highest waste generator in healthcare facilities. The major reasons include production of large‐volume non‐renewable waste, use of single‐use devices, and reprocessing or decontamination processes. Single‐use endoscopic accessories have gradually replaced reusable devices over last two decades contributing to the rising impact of GI endoscopy on ecosystem. Several reports of infection outbreaks with reusable duodenoscopes raised concerns regarding the efficacy and adherence to standard disinfection protocols. Even the enhanced reprocessing techniques like double high‐level disinfection have not been found to be the perfect ways for decontamination of duodenoscopes and therefore, paved the way for the development of single‐use duodenoscopes. However, the use of single‐use endoscopes is likely to amplify the net waste generated and carbon footprint of any endoscopy unit. Moreover, single‐use devices challenge one of the major pillars of sustainability, that is, "reuse." In the era of climate change, a balanced approach is required taking into consideration patient safety as well as financial and environmental implications. The possible solutions to provide optimum care while addressing the impact on climate include selective use of disposable duodenoscopes and careful selection of accessories during a case. Other options include use of disposable endcaps and development of effective high‐level disinfection techniques. The collaboration between the healthcare professionals and the manufacturers is paramount for the development of environmental friendly devices with low carbon footprint. [ABSTRACT FROM AUTHOR]

This paper discusses the promotion of modern jewelry and accessories in interwar France using the men’s fashion magazine Adam: la revue de l’homme as a case study. It focuses on a number of the magazine’s features on jewelry and accessories from the period 1925-40 in order to demonstrate how its mission to become “the magazine of the rue de la Paix” encompassed the promotion of jewelry and accessories. Recognizing that jewelry and accessories is an under-researched area, particularly in relation to studies of men’s formal attire of the period, this essay provides evidence of the seriousness with which the style commentators of Adam, complemented by its editorial decisions and advertisers’ contributions, were prepared to lend to the subject. Ultimately, the paper argues that a consideration of modern jewelry and accessories in the context of a relatively conservative men’s fashion magazine can help to further our understanding of the role played by modern objects of personal adornment in the interwar period. [ABSTRACT FROM AUTHOR]

This article examines the influence of post-impressionism on the work of contemporary fashion designers. Examples from different authors are examined and an attempt is made to compare their works. The role of current in the formation of modern trends in fashion design is analyzed. [ABSTRACT FROM AUTHOR]

With the purpose of developing a non-woven textile genre, an investigation is carried out to determine if vegetable cellulose can be used as an alternative raw material for the elaboration of a non-woven textile of the agglomerate type or the felt type that can be used as raw material. In clothing products, this research project is framed in a mixed method, which has a quantitative phase of an experimental nature in which the achira leaf is used as a source of cellulose, analyzing its chemical composition and morphological characteristics. In order to know the acceptance and use of alternative materials by fashion designers, a survey is carried out; In addition, the Desing Thinking methodology will be applied using its 5 phases: empathize, define, devise, prototype and evaluate. The results obtained led to the conclusion that a non-woven textile of the agglomerate type or vegetable cellulose felt can be obtained using the achira sheet, and when carrying out the tensile and resistance tests, a percentage of 0.08% is obtained as a result. the same one that is not suitable for use in clothing products directly, therefore it is considered a textile for technical use, one of the options is to combine it with a material that provides more resistance therefore when combining it it can be used in the development of trimmings that is a textile product. [ABSTRACT FROM AUTHOR]

Copyright of Stratum Plus Journal is the property of P.P. Stratum plus and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

LORI SME (Small and Medium Enterprise), operating as a producer of fashion accessories characterized by local craftsmanship, encounters challenges in accommodating diverse customer preferences due to resource constraints. To unleash its full potential, there exists a pressing need to adopt innovative design methodologies. This research endeavors to investigate the application of a modular design approach as a strategic solution for augmenting the variety of LORI SME accessories, thereby facilitating the creation of a range of jewelry products that can be easily tailored and adapted to meet individual customer requirements. The study utilizes a qualitative research methodology, encompassing literature reviews, interviews with the owner, exploration of visual motifs and materials, and practice-based research. The findings of this research illuminate that the adoption of a modular design approach significantly enhances the diversity of LORI SME's jewelry offerings, particularly in the case of its necklace products. This modular approach provides SMEs with a broader array of customizable necklace options characterized by distinctive local motifs and high craftsmanship value. These findings furnish valuable insights for SMEs within the LORI SME sector aiming to expand their product portfolios. Additionally, they offer guidance to designers and artisans regarding the potential advantages and challenges associated with the incorporation of modular design strategies in the broader context of small business innovation and product development. [ABSTRACT FROM AUTHOR]

In ancient times people lived without clothing, accessories etc. Over time the naturally available leaf and bark were worn as clothing. The leaves were dressed and decorated with flowers. The aesthetic began to blossom as she began to dress. She adorned herself with ornaments. The development of the garment continued to grow into cotton, silk, and wool. They also excelled in weaving garments with fine embroidery along with floral arrangements. They began to wear costume jewelry. They enjoyed wearing handkerchiefs, necklaces, headgear, noses and shoes. They made and wore garlands of thread, heads, and flowers and used to make a variety of flowers, beaded ornaments. The idea of doing makeup with clothing and accessories also prevailed. It is noteworthy that cosmetics have developed into the ‘art of aesthetics’ today. Aesthetics is the basis of health and beauty. The idea of keeping from head to toe began to grow. The Sangam literature tells of the specialties of the costume, jewelery and cosmetics of the Sangam period people. This article was created in order to find them. In this way one can know the specialties of the clothing, jewelery and cosmetics of the people of the Sangam period.

The writing of this article aims to describe the meaning of the symbol of traditional bridal clothing and the function of traditional bridal clothing of the Dayak Kenyah tribe in East Kalimantan. The formulation of this research problem is how to group the meaning of symbols in traditional wedding clothing accessories of the Dayak Kenyah tribe and what are the functions of traditional bridal clothing accessories in the life of the Dayak Kenyah tribe in East Kalimantan. The research method used in this study is an ethnographic method with simplification of steps according to research needs. Data collection and data analysis methods in the form of interviews and literature studies. The results of the study show that there is a symbolic meaning found in the traditional wedding dress accessories of the Dayak Kenyah tribe.

Copyright of Journal of Strategic & Social Research is the property of Mehmet Akif Ersoy University, Social Science Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The paper deals with the review of various technological procedures and the possibility of applying additional equipment on sprayers in the protection of field crops and from the aspect of rational application of pesticides such as herbicides, insecticides and fungicides. The use of accessories such as extended hoses in the application of herbicides, a nozzle adjustment assembly for insecticides and fungicides and a device (bio-collector) for collecting insects, can contribute the same effect in protection with lower consumption and less treatment of non-target surfaces.

Chinese women's apparel and accessories have been often mentioned by other countries in history and nowadays, and the underlying culture along with these apparel and accessories contributes to this developing world to some extent. The assessment of the international reputation for these kinds of apparel and accessories is important for better understanding the worldwide cultural exchange, globalization, social development and so on; however, it remains unknown. This study presents a work with the overall objective to measure and predict the international reputation of Chinese women's apparel and accessories. To reach this objective, the study first proposes a data mining procedure to use online query volume data from the Google Ngram corpus to construct a reputation index in order to measure the international reputation of Chinese women's apparel and accessories. Then, by establishing a series of socio-economic and political determinants associated with the international reputation of Chinese women's apparel and accessories, several forms of support vector machine based models are developed, aiming to predict their international reputation. There are two contributions out of this work: (1) presenting the first ever large-scale quantitative examination of the trend and measurement of the international reputation of Chinese women's apparel and accessories, which provides a new method to identify the dynamic transition of sociocultural development; (2) constructing a quantitative model to predict the international reputation of Chinese women's apparel and accessories, which generalizes an implication to understand the other sociocultural object and its impact factors. [ABSTRACT FROM AUTHOR]

Copyright of Al-Academy is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)