Search

This survey analysed 71 bottled water brands in Tehran, Iran. The laboratory analysis was investigated for ten physicochemical parameters and 16 elements, including heavy metals comprising (bicarbonate, fluoride, chloride, nitrate, nitrite, sulphate, pH, electrical conductivity (EC), total dissolved solids (TDS), total hardness (TH), Na, Mg, Ca, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sr, Ba, and, Zn). Statistical analysis were performed with R software. The water quality index (WQI) approach was applied to investigate water quality, the carcinogen risk (CR) and hazard index (HI) methods were used for assessing the health risks, and the cumulative impacts of heavy metals were evaluated with contamination degree (Cd) and heavy metal evaluation index (HEI). The results showed that among the physicochemical parameters, EC, TDS, TH, and HCO3 and heavy metals like Sr > Zn > Cu > Ni had the Highest values. The WQI value in totals was 91.86 and had good quality class, and the order was good (60.56%), poor (35.21%), and very poor bottled water (4.22%). The correlation results demonstrated that WQI ~ Fe and Zn ~ Mn had significant correlation coefficients (r = 1). Moreover, there is a significant correlation between TH with Mg and Ca and also between HCO3 with EC, TH, and Ca, and then between SO4 with Na. Carcinogen risk for Cr in children and adults was 2 × 10−4 and 6 × 10−4, respectively. The responsible pollutants in non-carcinogen risk assessment were F and NO3, and their HI was greater than one in adult and child subgroups. The values of Cd and HEI were lower than critical limits. Also, Pb had a significant correlation with Cd and HEI (r = 1). This study revealed that bottled water contains minerals and may possess heavy metals, which pose significant human health risks, especially for children. [ABSTRACT FROM AUTHOR]

The main route of fluoride uptake is drinking water. Fluoride absorption in the acceptable range (0.5–1.5 mg L−1) is suitable for the body, but its too much consumption can have irreversible health effects. To compare fluoride concentration with the WHO guidelines, 112 water samples were taken from groundwater aquifers in 22 villages of Garmsar County, the central part of Iran, during 2018 to 2019. Fluoride concentration was measured by the SPANDS method and its non-carcinogenic impacts were calculated using EDI and HQ. The statistical population was divided into four categories of infant, children, teenagers, and adults. Linear regression and Spearman rank correlation coefficient tests were used to investigate the relationships between the well's depth and fluoride concentration in the water samples. The annual mean concentrations of fluoride in 2018 and 2019 were 0.75 and 0.64 mg L−1and, the fluoride mean concentration in the samples classifying the cold and hot seasons of the studied years was 0.709 and 0.689 mg L−1, respectively. The amount of fluoride in 27% of the samples in both years was less than the acceptable minimum (0.5 mg L−1). Also, 11% of the samples in 2018 (6 samples) had fluoride levels higher than 1.5 mg L−1. The HQ showed that the children were vulnerable; teenagers and adults were in the next ranks, respectively. Statistical tests showed a reverse and significant correlation (R2 = – 0.02, β < 0.0001) between well depth and fluoride content. The border between the usefulness/harmfulness of fluoride is very narrow and requires extensive studies. [ABSTRACT FROM AUTHOR]

The quality of drinking water, in addition to the presence of physicochemical parameters, depends on the type and geographical location of water sources. In this study, groundwater quality was investigated by sampling total dissolved solids (TDS), electrical conductivity (EC), total hardness (TH), Cl– , Ca2+, and Mg2+ parameters in 13 sites, and 40 water samples were sent to the laboratory. Electrometric, titration, and spectrophotometer methods were used. In the next step, the water quality index (WQI) was used to investigate the impact and weight of each parameter in the groundwater. The results showed that only the mean of magnesium ion (40.88 mg L–1) was lower than the guidelines of World Health Organization (WHO). Interpreting the WQI based on the WHO guidelines showed that the statuses of 21, 11, and 7 samples were very poor, poor, and average quality, respectively, and one sample had excellent quality. Among the studied parameters, the means of EC (2,087.49 mS cm–1) and Cl– (1,015.87 mg L–1) exceeded the global and national limits. Classifying water quality about TH was very hard (87.5%), hard (7.5%), and moderate (5%), respectively. Based on the geographical distribution, the drinking water index in sites 4 and 11 did not have acceptable quality. Chloride ion was identified as the responsible pollutant and the most important ion for raising the index. The outputs of statistical tests and Spearman correlation had significant and direct correlation (p < 0.05, r > 0.7) between TDS, EC, and chloride, EC and chloride, as well as TH, Ca2+, and Mg2+. [ABSTRACT FROM AUTHOR]