Search

Abstract Herein, a novel electrochemical sensor that was used for the first time for sensitive and selective detection of dopamine (DA) was fabricated. The new sensor is based on the decoration of the glassy carbon electrode surface (GC) with a polymer film of 1,3-Benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)) acetonitrile (poly(BTCA). The prepared (poly(BTCA) was examined by using different techniques such as 1H NMR, 13C NMR, FTIR, and UV-visible spectroscopy. The electrochemical investigations of DA were assessed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results obtained showed that the modifier increased the electrocatalytic efficiency with a noticeable increase in the oxidation peak current of DA in 0.1 M phosphate buffer solution (PBS) at an optimum pH of 7.0 and scan rate of 200 mV/s when compared to unmodified GC. The new sensor displays a good performance for detecting DA with a limit of detection (LOD 3σ), and limit of quantification (LOQ 10σ) are 0.28 nM and 94 nM respectively. The peak current of DA is linearly proportional to the concentration in the range from 0.1 to 10.0 µM. Additionally, the fabricated electrode showed sufficient reproducibility, stability, and selectivity for DA detection in the presence of different interferents. The proposed poly(BTCA)/GCE sensor was effectively applied to detect DA in the biological samples.

In this study, an eco-friendly and novel hydrogel based on a crosslinked polyvinyl alcohol (PVA), iota carrageenan (IC) and polyvinylpyrrolidone (PVP) scaffold, containing a large amount (10–50 wt%) of nanoscale palm fronds (NPF) as additives, for water purification was demonstrated. A life cycle assessment (LCA) findings on NPF as biomass waste incorporated into PVA_PVP_IC polymer matrix was presented, and the results highlight the necessity of focused actions to reduce environmental impact and support the palm waste utilization in a sustainable manner. The multicomponent nanocomposite hydrogels were examined as adsorbents in a system work in batches for methylene blue (MB) and paracetamol (PCT) removal. The results show that, the presence of NPF, which dispersed in the hydrogel PVA_PVP_IC scaffolds containing both covalent and non-covalent cross-linking bonds, greatly enhanced the MB and PCT adsorption efficiency. A response surface methodology (RSM) model was used to find the best operating parameters of contaminant adsorption, including time, adsorbent dose, and starting concentration of pollutants. By using this statistical model, it was found that the optimal conditions for the adsorption reaction to achieve the complete removal of MB are 66.7 h adsorption time duration, 98.5 mg L−1 starting concentration, and an adsorbent dose of 5.9 mg, while for the complete removal of PCT, it is 57.6 h adsorption time duration, 80 mg L−1 starting concentration, and an adsorbent dose of 6 mg. The reusability of the nanocomposite hydrogels were tested for 5 cycles, all showed high adsorption capacity, indicating the potential for practical application of this nanocomposite hydrogel system. This study indicates that the prepared nanocomposite hydrogel raises the standard used for treatment of wastewater and also gives a solution to protect the environment and mitigate global warming.

This work aimed to develop an anionic cellulose nanofiber (CNF) bio-adsorbent from date palm tree waste and to investigate its removal efficiency compared to cationic methylene blue dye from contaminated water. Date palm pulp was first prepared from date palm leaves through acid hydrolysis using H2SO4, followed by hydrolysis in a basic medium using KOH, in which the process completely removed the components of hemicellulose, lignin, and silica. To obtain anionic CNF, the resulting pulp was further treated with H2SO4, followed by centrifugation. Biogel formation of the CNF suspension was promoted by sonication, where its removal efficiency of methylene blue dye was studied as a function of dye concentration, temperature, contact time, and pH value. In this work, we investigated two isotherms, i.e., Langmuir and Freundlich. The Langmuir model’s consistency with the experimental data suggests that the adsorption of methylene blue dye onto CNF is monolayer and surface-limited. The reported maximum removal efficiency of 5 mg/g at 60 °C indicates the optimal temperature for adsorption in this specific case. Additionally, a pseudo-second-order model and Elovich model were also utilized to obtain a better understanding of the adsorption mechanism, in which we found not just physical adsorption but also an indication of a chemical reaction occurring between methylene blue dye and CNF. According to the results, that pseudo-second-order model’s consistency with the experimental data suggests that the adsorption of methylene blue (MB) onto CNF is rate-limiting step involving chemisorption between the two. The study reveals that CNF adsorbents derived from renewable natural waste sources such as date palm leaves can be effective in removing cationic contaminants such as methylene blue dye.

Anionic carboxylated cellulose nanofibers (CNF) are effective media to remove cationic contaminants from water. In this study, sustainable cationic CNF-based adsorbents capable of removing anionic contaminants were demonstrated using a simple approach. Specifically, the zero-waste nitro-oxidization process was used to produce carboxylated CNF (NOCNF), which was subsequently converted into a cationic scaffold by crosslinking with aluminum ions. The system, termed Al-CNF, is found to be effective for the removal of fluoride ions from water. Using the Langmuir isotherm model, the fluoride adsorption study indicates that Al-CNF has a maximum adsorption capacity of 43.3 mg/g, which is significantly higher than that of alumina-based adsorbents such as activated alumina (16.3 mg/g). The selectivity of fluoride adsorption in the presence of other anionic species (nitrate or sulfate) by Al-CNF at different pH values was also evaluated. The results indicate that Al-CNF can maintain a relatively high selectivity towards the adsorption of fluoride. Finally, the sequential applicability of using spent Al-CNF after the fluoride adsorption to further remove cationic contaminant such as Basic Red 2 dye was demonstrated. The low cost and relatively high adsorption capacity of Al-CNF make it suitable for practical applications in fluoride removal from water.

In this study, a sulfonation approach using chlorosulfonic acid (CSA) to prepare cellulose sulfate nanofibers (CSNFs) from raw jute fibers is demonstrated. Both elemental sulfur content and zeta potential in the CSNFs are found to increase with increasing CSA content used. However, the corresponding crystallinity in the CSNFs decreases with the increasing amount of CSA used due to degradation of cellulose chains under harsh acidic conditions. The ammonium adsorption results from the CSNFs with varying degrees of sulfonation were analyzed using the Langmuir isotherm model, and the analysis showed a very high maximum ammonium adsorption capacity (41.1 mg/g) under neutral pH, comparable to the best value from a synthetic hydrogel in the literature. The high ammonium adsorption capacity of the CSNFs was found to be maintained in a broad acidic range (pH = 2.5 to 6.5).

Different drying techniques may alter the chemical composition of plant extracts and consequently affect their bioactivity potential. The current study was designed to reveal the effect of four different drying methods on the phytochemical composition and antioxidant activity of hydrodistilled essential oil (HD-EO) and methanolic (APM) extract obtained from the aerial part of Anthemis palestina from Jordan. Aerial parts of A. palestina in their fresh (FR) form and after drying in shade (ShD), sun (SD), oven at 40 °C (O40D) and 60 °C (O60D), in addition to microwave (MWD), were used to extract their essential oils by hydrodistillation and to prepare the different methanolic extracts (APM). GC/MS analysis of the different HD-EOs revealed qualitative and quantitative differences among the different samples. While FR, O40D, O60D, and MWD EO samples contained mainly sesquiterpene hydrocarbons (35.43%, 29.04%, 53.69%, and 59.38%, respectively), ShD sample was rich in oxygenated monoterpenes (33.57%), and SD-EO contained mainly oxygenated sesquiterpenes (40.36%). Principal component analysis (PCA) and Cluster analysis (CA) grouped the different drying methods based on their impact on the concentration of chemical constituents. SD-EO demonstrated high DPPH and ABTS antioxidant activity (1.31 ± 0.03) × 10−2; (1.66 ± 0.06) × 10−2 μg/mL, respectively). Furthermore, A. paleistina methanolic extracts (APM) obtained after subjecting the plant to different drying methods showed interesting patterns in terms of their TPC, TFC, antioxidant activity, and phytochemical profiling. Of all extracts, SD-APM extract had the highest TPC (105.37 ± 0.19 mg GA/g DE), highest TFC (305.16 ± 3.93 mg Q/g DE) and demonstrated the highest DPPH and ABTS scavenging activities ((4.42 ± 0.02) × 10−2; (3.87 ± 0.02) × 10−2 mg/mL, respectively); all were supported by correlation studies. LC-MS/MS analysis of the different extracts revealed the richness of the SD-APM extract in phenolic acids and flavonoids.

The current study reports on the synthesis and anticancer efficacy of novel oxadiazole derivatives (8a-f) as tubulin polymerization inhibitors. NMR, mass, and elemental studies were used to confirm the newly produced compounds. In contrast to the conventional medicine colchicine, compounds 8e and 8f demonstrated stronger sensitivity and improved IC50 values in the range of 3.19–8.21 μM against breast MCF-7, colorectal HCT116, and liver HepG2 cancer cell lines. The target compounds were tested for enzymatic activity against the tubulin enzyme. Compounds 8e and 8f were shown to have the most effective inhibitory action among the new compounds, with IC50 values of 7.95 and 9.81 nM, respectively. As compared to the reference drug, molecular docking investigations of the developed compounds revealed the crucial hydrogen bonding in addition to the hydrophobic interaction at the binding site, assisting in the prediction of the structural requirements for the found anticancer activity. These findings indicate that the 1,3,4-oxadizole scaffold has the potential for future research into new anticancer medicines.

The genus Scrophularia is one of the largest genera belonging to the Scrophulariaceae family. Different members of the genus exhibit an interesting, wide spectrum of bioactivities. Accordingly, the current study aimed to investigate, for the first time, the chemical composition of the essential oil of Scrophularia peyronii Post. from Jordan. Additionally, extracts obtained from the aerial parts with solvents of different polarities were assayed for their phytochemical constituents and in vitro antioxidant activities. The major constituents detected in the essential oil, as revealed by GC/MS analysis, contained mainly Z,Z-farnesyl acetone (11.04%), β-elemene (6.36%), n-octanal (5.98%), and spathulenol (4.58%). Each of the aqueous methanol (Sp-M) and butanol (Sp-B) extracts contained flavonoids, saponins, anthraquinone, and glycosides. Both extracts were evaluated for their total phenolic content (TPC), total flavonoid content (TFC), and their in vitro antioxidant activity, which were assayed using the DPPH radical scavenging activity and ABTS radical scavenging methods. Additionally, the two extracts were then subjected to LC-ESI-MS/MS for the qualitative determination of their secondary metabolite content, especially in flavonoids and phenolic compounds. The results showed that the Sp-B extract of S. peyronii had the highest contents of both phenolic compounds and flavonoids and showed high radical scavenging activity, as determined by the two assay methods, when compared with the Sp-M extract. The LC-ESI-MS/MS analysis resulted in the detection of 21 compounds, including 8 flavonoids, 6 phenolic acids, 6 iridoids, and 2 acids. Although the majority of compounds were detected in both extracts, it was noticed that scropolioside B, 6′-O-cinnamoylharpagide, isoferulic acid, and 6-O-methylcatapol were only detected in the Sp-M fraction.

Since the first report of the organoselenium compound, ebselen, as a potent inhibitor of the SARS-CoV-2 Mpro main protease by Z. Jin et al. (Nature, 2020), different OSe analogs have been developed and evaluated for their anti-COVID-19 activities. Herein, organoselenium-clubbed Schiff bases were synthesized in good yields (up to 87%) and characterized using different spectroscopic techniques. Their geometries were studied by DFT using the B3LYP/6–311 (d, p) approach. Ten FDA-approved drugs targeting COVID-19 were used as model pharmacophores to interpret the binding requirements of COVID-19 inhibitors. The antiviral efficiency of the novel organoselenium compounds was assessed by molecular docking against the 6LU7 protein to investigate their possible interactions. Our results showed that the COVID-19 primary protease bound to organoselenium ligands with high binding energy scores ranging from −8.19 to −7.33 Kcal/mol for 4c and 4a to −6.10 to −6.20 Kcal/mol for 6b and 6a. Furthermore, the docking data showed that 4c and 4a are good Mpro inhibitors. Moreover, the drug-likeness studies, including Lipinski’s rule and ADMET properties, were also assessed. Interestingly, the organoselenium candidates manifested solid pharmacokinetic qualities in the ADMET studies. Overall, the results demonstrated that the organoselenium-based Schiff bases might serve as possible drugs for the COVID-19 epidemic.

A novel composite hydrogel bead composed of sodium alginate (SA) and aldehyde cellulose nanocrystal (DCNC) was developed for antibiotic remediation through a one-step cross-linking process in a calcium chloride bath. Structural and physical properties of the hydrogel bead, with varying composition ratios, were analyzed using techniques such as BET analysis, SEM imaging, tensile testing, and rheology measurement. The optimal composition ratio was found to be 40% (SA) and 60% (DCNC) by weight. The performance of the SA–DCNC hydrogel bead for antibiotic remediation was evaluated using doxycycline (DOXY) and three other tetracyclines in both single- and multidrug systems, yielding a maximum adsorption capacity of 421.5 mg g−1 at pH 7 and 649.9 mg g−1 at pH 11 for DOXY. The adsorption mechanisms were investigated through adsorption studies focusing on the effects of contact time, pH, concentration, and competitive contaminants, along with X-ray photoelectron spectroscopy analysis of samples. The adsorption of DOXY was confirmed to be the synergetic effects of chemical reaction, electrostatic interaction, hydrogen bonding, and pore diffusion/surface deposition. The SA–DCNC composite hydrogel demonstrated high reusability, with more than 80% of its adsorption efficiency remaining after five cycles of the adsorption–desorption test. The SA–DCNC composite hydrogel bead could be a promising biomaterial for future antibiotic remediation applications in both pilot and industrial scales because of its high adsorption efficiency and ease of recycling.

The reaction between [PtCl2(L-L)] (L-L = dppe, dppp, dppb, dppf, Phen and Bipy) or [PtCl2(PPh3)2] with 1-benzyl-3-phenylthiourea (H2BPT) in a basic medium (CHCl3/EtOH) created new coordinated square planner Pt(II) complexes with [Pt(BPT)(L-L)] (1–4,6,7) and [Pt(BPT)(PPh3)2] (5) types. These complexes were fully characterized by analytical and spectroscopic techniques (i.e., IR, UV. Vis., 1H, and 31P NMR). The results indicated that the thiourea derivative ligand act as a dianion ligand bonded through both S and N atoms in a chelating mode or as a mono-anion ligand coordinated through a sulfur atom with Pt(II) ion. Cytotoxicity activity was performed by the MTT assay to determine anti-cancer activities against MCF-7 breast cancer cells. The study indicated that IC50 values for MCF-7 cells were 10.96–78.90 µM. Additionally, the complexes [Pt(BPT)(dppe)] (1), [Pt(BPT)(PPh3)2] (5), and [Pt(BPT)2(Bipy)] (7) were investigated theoretically, where their quantum parameters were evaluated using the Gaussian 09 program using the theory of B3LYP/Def2TZVP//B3LYP/Lanl2dz. The calculation results confirmed the optimized structures of the complexes square planar geometry. However, the calculated bond lengths and angles showed a slightly distorted square planar geometry due to the trans influence of the sulfur atom. Additionally, complexes of [Pt(BPT)(dppe)] (1) and [Pt(BPT)(PPh3)2] (5) showed higher stability compared to [Pt(BPT)2(Bipy)] (7), which can be attributed to the higher back-donation of (1) and (5) complexes. Furthermore, among the three complexes, the [Pt(BPT)2(Bipy)] (7) complex possessed the lowest HOMO–LUMO gap, which may be a good candidate as the photo-catalyst material.

The chemical composition of essential oil extracted from the aerial parts of Ballota saxatilis Sieber ex C.Presl from Jordan has been elucidated by gas chromatography–mass spectrometry (GC-MS). Additionally, aqueous methanol (BsA), Butanol (BsB) and water (BsW) extracts were screened for their total phenol content (TPC), total flavonoid content (TFC), and antioxidant activities using the 2,2 Diphenyl-1-picrylhydrazyl (DPPH) and 2,2-Azino-bis (3-ethylbenzthiazoline-6-sulphonic acid) diammonium salt (ABTS) methods. The most potent extracts were screened for their phenolic acids and flavonoid content using liquid the chromatography–mass spectrometry (LC-MS) technique. The results indicated that the essential oil predominantly contained cis-pinane (14.76%), β-caryophyllene (8.91%) and allo-aromadendrene epoxide (6.39%). Among the different extracts investigated, the BsB fraction had the most TPC and TFC (455.79 ± 1.03 µg gallic acid/g dry extract; 272.62 ± 8.28 µg quercetin/g dry extract, respectively) and had the best radical and radical cation scavenging activities, as determined using the DPPH and ABTS methods. Quantitative and qualitative LC-MS analyses of BsA and BsB using LC-MS revealed each of the kaempferol-3-O-rutinoside (30.29%), chrysoeriol-7-glucoside (7.93%) and luteolin 7-o-glucoside (7.76%) as the main constituents of the BsA fraction. The BsB fraction was rich in 7,4′-dimethoxy-3-hydroxyflavone (34.68%), kaempferol-3,7,4′-trimethyl ether (29.17%) and corymbosin (9.66%) and lower concentration levels of kaempferol-3-O-rutinoside (1.63%) and chrysoeriol-7-glucoside (0.51%).

Ultrafiltration (UF) is a common technique used in wastewater treatments. However, the issue of membrane fouling in UF can greatly hinder the effectiveness of the treatments. This study demonstrated a low-fouling composite cellulose membrane system based on microfibrillated cellulose (MFC) and silica nanoparticle additives. The incorporation of ‘non-spherical’ silica nanoparticles was found to exhibit better structural integration in the membrane (i.e., minimal aggregation of silica nanoparticles in the membrane scaffold) as compared to spherical silica. The resulting composite membranes were tested for UF using local wastewater, where the best-performing membrane exhibited higher permeation flux than commercial polyvinylidene difluoride (PVDF) and polyether sulfone (PES) membranes while maintaining a high separation efficiency (~99.6%) and good flux recovery ratio (>90%). The analysis of the fouling behavior using different models suggested that the processes of cake layer formation and pore-constriction were probably two dominant fouling mechanisms, likely due to the presence of humic substances in wastewater. The demonstrated cellulose composite membrane system showed low-fouling and high restoration capability by a simple hydraulic cleaning method due to the super hydrophilic nature of the cellulose scaffold containing silica nanoparticles.

Thallium(I) (Tl(I)) pollution has become a pressing environmental issue due to its harmful effect on human health and aquatic life. Effective technology to remove Tl(I) ions from drinking water can offer immediate societal benefits especially in the developing countries. In this study, a bio-adsorbent system based on nitro-oxidized nanocellulose (NOCNF) extracted from sorghum stalks was shown to be a highly effective Tl(I) removal medium. The nitro-oxidation process (NOP) is an energy-efficient, zero-waste approach that can extract nanocellulose from any lignocellulosic feedstock, where the effluent can be neutralized directly into a fertilizer without the need for post-treatment. The demonstrated NOCNF adsorbent exhibited high Tl(I) removal efficiency (>90% at concentration < 500 ppm) and high maximum removal capacity (Qm = 1898 mg/g using the Langmuir model). The Tl(I) adsorption mechanism by NOCNF was investigated by thorough characterization of NOCNF-Tl floc samples using spectroscopic (FTIR), diffraction (WAXD), microscopic (SEM, TEM, and AFM) and zeta-potential techniques. The results indicate that adsorption occurs mainly due to electrostatic attraction between cationic Tl(I) ions and anionic carboxylate groups on NOCNF, where the adsorbed Tl(I) sites become nuclei for the growth of thallium oxide nanocrystals at high Tl(I) concentrations. The mineralization process enhances the Tl(I) removal efficiency, and the mechanism is consistent with the isotherm data analysis using the Freundlich model.

Environment-friendly materials (e.g., Honey and Mint) are used as corrosion inhibitors for aluminum in hydrochloric acid (HCl) using both the density functional theory (DFT) at the B3LYP/6–31G* basis set level and semi-empirical methods (AM1, PM3, MINDO, and RM1). The aim of this study is to investigate the inhibition efficiency (%IE) in terms of their molecular structure. The quantum chemical parameters such as the highest occupied molecular orbital energy (EHOMO), the lowest unoccupied molecular orbital energy (ELUMO), the energy gap (ΔE), the charge on the reactive core, the hardness (η), and the total energy have all been computed. The MINDO method was used to measure the electronic energies and charge densities of the inhibitors that were used. Theoretical calculations were also carried out, with the findings correlating well with the experimental data. Gravimetry and gasometry measurements were used to investigate the effects of honey and mint on aluminum corrosion in a 1.0 M hydrochloric acid (HCl) solution. In acid solutions, honey and mint were found to be effective inhibitors of aluminum corrosion, with honey being the better option. Because of the adsorption of its components on aluminum surfaces, the inhibitory effect of the used inhibitors was addressed. The higher dipole moment of honey than that of mint caused the adsorption of honey on the aluminum surface better. The IEs measured by gravimetry and gasometry are almost identical.

A simple electrochemical sensor for nicotine (NIC) detection was performed. The sensor based on a glassy carbon electrode (GCE) was modified by (1,2-naphthoquinone-4-sulphonic acid)(Nq) decorated by graphene oxide (GO) nanocomposite. The synthesized (GO) nanosheets were characterized using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), FT-IR, and UV-Visible Spectroscopy. The insertion of Nq with GO nanosheets on the surface of GCE displayed high electrocatalytic activity towards NIC compared to the bare GCE. NIC determination was performed under the optimum conditions using 0.10 M of Na2SO4 as a supporting electrolyte with pH 8.0 at a scan rate of 100 mV/s using both cyclic voltammetry (CV) and differential pulse voltammetry (DPV). This electrochemical sensor showed an excellent result for NIC detection. The oxidation peak current increased linearly with a 6.5–245 µM of NIC with R2 = 0.9999. The limit of detection was 12.7 nM. The fabricated electrode provided satisfactory stability, reproducibility, and selectivity for NIC oxidation. The reliable GO/Nq/GCE sensor was successfully applied for detecting NIC in the tobacco product and a urine sample.

Heterocyclic compounds, including pyrimidine derivatives, exhibit a broad variety of biological and pharmacological activities. In this paper, a previously synthesized novel pyrimidine molecule is proposed, and its pharmaceutical properties are investigated. Computational techniques such as the density functional theory, ADMET evaluation, and molecular docking were applied to elucidate the chemical nature, drug likeness and antibacterial function of molecule. The viewpoint of quantum chemical computations revealed that the molecule was relatively stable and has a high electrophilic nature. The contour maps of HOMO-LUMO and molecular electrostatic potential were analyzed to illustrate the charge density distributions that could be associated with the biological activity. Natural bond orbital (NBO) analysis revealed details about the interaction between donor and acceptor within the bond. Drug likeness and ADMET analysis showed that the molecule possesses the agents of safety and the effective combination therapy as pharmaceutical drug. The antimicrobial activity was investigated using molecular docking. The investigated molecule demonstrated a high affinity for binding within the active sites of antibacterial and antimalarial proteins. The high affinity of the antibacterial protein was proved by its low binding energy (−7.97 kcal/mol) and a low inhibition constant value (1.43 µM). The formation of four conventional hydrogen bonds in ligand–protein interactions confirmed the high stability of the resulting complexes. When compared to known standard drugs, the studied molecule displayed a remarkable antimalarial activity, as indicated by higher binding affinity (B.E. −5.86 kcal/mol & Ki = 50.23 M). The pre-selected molecule could be presented as a promising drug candidate for the development of novel antimicrobial agents.

The strategic idea in this work was to increase pH values by employing natural alkali sources (i.e., HCO3− and CO32−) from four tested agro-ashes as an alternative to chemicals (i.e., lime or soda ash). The considerable proportion of carbonates and bicarbonates in the investigated ash products had remarkable features, making them viable resources. All ash materials showed a significant ability for Ca ion elimination at high initial Ca ion concentrations. A slight quantity of ash (10 g/L) was sufficient for usage on very hard water contents up to 3000 ppm. Finally, the tested agro-ash was free of cost. Furthermore, unlike other conventional precipitants, such as NaOH, Ca(OH)2, NaHCO3, Na2CO3, and CaO, they are cost effective and ecologically sustainable. There is no need to employ any additional chemicals or modify the agro-ash materials throughout the treatment process. The benefits of the manufactured ash were assessed using a SWOT analysis.

The present investigation informs a descriptive study of 1-(4-Hydroxyphenyl) -3-phenylprop-2-en-1-one compound, by using density functional theory at B3LYP method with 6-311G** basis set. The oxygen atoms and π-system revealed a high chemical reactivity for the title compound as electron donor spots and active sites for an electrophilic attack. Quantum chemical parameters such as hardness (η), softness (S), electronegativity (χ), and electrophilicity (ω) were yielded as descriptors for the molecule’s chemical behavior. The optimized molecular structure was obtained, and the experimental data were matched with geometrical analysis values describing the molecule’s stable structure. The computed FT-IR and Raman vibrational frequencies were in good agreement with those observed experimentally. In a molecular docking study, the inhibitory potential of the studied molecule was evaluated against the penicillin-binding proteins of Staphylococcus aureus bacteria. The carbonyl group in the molecule was shown to play a significant role in antibacterial activity, four bonds were formed by the carbonyl group with the key protein of the bacteria (three favorable hydrogen bonds plus one van der Waals bond) out of six interactions. The strong antibacterial activity was also indicated by the calculated high binding energy (−7.40 kcal/mol).