Search

The combination of low-temperature scanning tunnelling microscopy with a mass-selective electro-spray ion-beam deposition established the investigation of large biomolecules at nanometer and sub-nanometer scale. Due to complex architecture and conformational freedom, however, the chemical identification of building blocks of these biopolymers often relies on the presence of markers, extensive simulations, or is not possible at all. Here, we present a molecular probe-sensitisation approach addressing the identification of a specific amino acid within different peptides. A selective intermolecular interaction between the sensitiser attached at the tip-apex and the target amino acid on the surface induces an enhanced tunnelling conductance of one specific spectral feature, which can be mapped in spectroscopic imaging. Density functional theory calculations suggest a mechanism that relies on conformational changes of the sensitiser that are accompanied by local charge redistributions in the tunnelling junction, which, in turn, lower the tunnelling barrier at that specific part of the peptide., (© 2023. The Author(s).)

Atomic design of a 2D-material such as graphene can be substantially influenced by etching, deliberately induced in a transmission electron microscope. It is achieved primarily by overcoming the threshold energy for defect formation by controlling the kinetic energy and current density of the fast electrons. Recent studies have demonstrated that the presence of certain species of atoms can catalyze atomic bond dissociation processes under the electron beam by reducing their threshold energy. Most of the reported catalytic atom species are single atoms, which have strong interaction with single-layer graphene (SLG). Yet, no such behavior has been reported for molecular species. This work shows by experimentally comparing the interaction of alkali and halide species separately and conjointly with SLG, that in the presence of electron irradiation, etching of SLG is drastically enhanced by the simultaneous presence of alkali and iodine atoms. Density functional theory and first principles molecular dynamics calculations reveal that due to charge-transfer phenomena the CC bonds weaken close to the alkali-iodide species, which increases the carbon displacement cross-section. This study ascribes pronounced etching activity observed in SLG to the catalytic behavior of the alkali-iodide species in the presence of electron irradiation., (© 2021 The Authors. Small published by Wiley-VCH GmbH.)

Correlating the structures and properties of a polymer to its monomer sequence is key to understanding how its higher hierarchy structures are formed and how its macroscopic material properties emerge. Carbohydrate polymers, such as cellulose and chitin, are the most abundant materials found in nature whose structures and properties have been characterized only at the submicrometer level. Here, by imaging single-cellulose chains at the nanoscale, we determine the structure and local flexibility of cellulose as a function of its sequence (primary structure) and conformation (secondary structure). Changing the primary structure by chemical substitutions and geometrical variations in the secondary structure allow the chain flexibility to be engineered at the single-linkage level. Tuning local flexibility opens opportunities for the bottom-up design of carbohydrate materials., Competing Interests: The authors declare no competing interest., (Copyright © 2021 the Author(s). Published by PNAS.)

Using electrospray ion beam deposition, we collide the complex molecule Reichardt's dye (C_{41}H_{30}NO^{+}) at low, hyperthermal translational energy (2-50 eV) with a Cu(100) surface and image the outcome at single-molecule level by scanning tunneling microscopy. We observe bond-selective reaction induced by the translational kinetic energy. The collision impulse compresses the molecule and bends specific bonds, prompting them to react selectively. This dynamics drives the system to seek thermally inaccessible reactive pathways, since the compression timescale (subpicosecond) is much shorter than the thermalization timescale (nanosecond), thereby yielding reaction products that are unobtainable thermally.

Biomolecules function by adopting multiple conformations. Such dynamics are governed by the conformation landscape whose study requires characterization of the ground and excited conformation states. Here, the conformational landscape of a molecule is sampled by exciting an initial gas-phase molecular conformer into diverse conformation states, using soft molecule-surface collision (0.5-5.0 eV). The resulting ground and excited molecular conformations, adsorbed on the surface, are imaged at the single-molecule level. This technique permits the exploration of oligosaccharide conformations, until now, limited by the high flexibility of oligosaccharides and ensemble-averaged analytical methods. As a model for cellulose, cellohexaose chains are observed in two conformational extremes, the typical "extended" chain and the atypical "coiled" chain-the latter identified as the gas-phase conformer preserved on the surface. Observing conformations between these two extremes reveals the physical properties of cellohexaose, behaving as a rigid ribbon that becomes flexible when twisted. The conformation space of any molecule that can be electrosprayed can now be explored.

Formation and characterization of low-dimensional nanostructures is crucial for controlling the properties of two-dimensional (2D) materials such as graphene. Here, we study the structure of low-dimensional adsorbates of cesium iodide (CsI) on free-standing graphene using aberration-corrected transmission electron microscopy at atomic resolution. CsI is deposited onto graphene as charged clusters by electrospray ion-beam deposition. The interaction with the electron beam forms two-dimensional CsI crystals only on bilayer graphene, while CsI clusters consisting of 4, 6, 7, and 8 ions are exclusively observed on single-layer graphene. Chemical characterization by electron energy-loss spectroscopy imaging and precise structural measurements evidence the possible influence of charge transfer on the structure formation of the CsI clusters and layers, leading to different distances of the Cs and I to the graphene.

Saccharides, also commonly known as carbohydrates, are ubiquitous biomolecules, but little is known about their interaction with surfaces. Soft-landing electrospray ion beam deposition in conjunction with high-resolution imaging by scanning tunneling microscopy now provides access to the molecular details of the surface assembly of this important class of bio-molecules. Among carbohydrates, the disaccharide trehalose is outstanding as it enables strong anhydrobiotic effects in biosystems. This ability is closely related to the observed polymorphism. In this work, we explore the self-assembly of trehalose on the Cu(100) surface. Molecular imaging reveals the details of the assembly properties in this reduced symmetry environment. Already at room temperature, we observe a variety of self-assembled motifs, in contrast to other disaccharides like e.g. sucrose. Using a multistage modeling approach, we rationalize the conformation of trehalose on the copper surface as well as the intermolecular interactions and the self-assembly behavior., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Saccharides are ubiquitous biomolecules, but little is known about their interaction with, and assembly at, surfaces. By combining preparative mass spectrometry with scanning tunneling microscopy, we have been able to address the conformation and self-assembly of the disaccharide sucrose on a Cu(100) surface with subunit-level imaging. By employing a multistage modeling approach in combination with the experimental data, we can rationalize the conformation on the surface as well as the interactions between the sucrose molecules, thereby yielding models of the observed self-assembled patterns on the surface., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Desorption/ionization induced by neutral SO 2 clusters (DINeC) is used for mass spectrometry (MS) of surface-adsorbed molecules. The method is shown to be a surface-sensitive analysis tool capable of detecting molecular adsorbates in a wide range of molecular weights as well as their reactions on surfaces, which are otherwise difficult to access. Two different surface/adsorbate systems prepared by means of electrospray ion beam deposition (ES-IBD) were investigated: For the peptide angiotensin II on gold, intact molecules were desorbed from the surface when deposited by soft landing ES-IBD. By comparison to the well-controlled amount of substance deposited by ES-IBD, the sensitivity of DINeC-MS was shown to be on the order of 0.1% of a monolayer coverage, corresponding to femtomoles of analyte. Depending on deposition and sample conditions, the original state of charge of the molecules could be retrieved. Reaction of the adsorbed molecules both with surface atoms as well as with coadsorbed D 2 O was monitored. Rhodamine 6G was also desorbed as an intact molecule when deposited with kinetic energies below 50 eV. For higher deposition energy, fragmentation of the dye molecules was observed by means of DINeC-MS.

Herein we report the fabrication of molecular nanostructures on surfaces via two-dimensional (2D) folding of the nine amino acid peptide bradykinin. Soft-landing electrospray ion beam deposition in conjunction with high-resolution imaging by scanning tunneling microscopy is used to fabricate and investigate the molecular nanostructures. Subnanometer resolved images evidence the large conformational freedom of the molecules if thermal motion is inhibited and the formation of stable uniform dimers of only one specific conformation when diffusion can take place. Molecular dynamics modeling supported by density functional theory calculations give atomically precise insight into the induced-fit binding scheme when the folded dimer is formed. In the absence of solvent, we find a hierarchy of binding strength from polar to nonpolar, manifested in an inverted polar-nonpolar segregation which suppresses unspecific interactions at the rim of the nanostructure. The demonstrated 2D-folding scheme resembles many key properties of its native 3D counterpart and shows that functional, molecular nanostructures on surfaces fabricated by folding could be just as versatile and specific.

Imaging single proteins has been a long-standing ambition for advancing various fields in natural science, as for instance structural biology, biophysics, and molecular nanotechnology. In particular, revealing the distinct conformations of an individual protein is of utmost importance. Here, we show the imaging of individual proteins and protein complexes by low-energy electron holography. Samples of individual proteins and protein complexes on ultraclean freestanding graphene were prepared by soft-landing electrospray ion beam deposition, which allows chemical- and conformational-specific selection and gentle deposition. Low-energy electrons do not induce radiation damage, which enables acquiring subnanometer resolution images of individual proteins (cytochrome C and BSA) as well as of protein complexes (hemoglobin), which are not the result of an averaging process.

The sequence of a peptide programs its self-assembly and hence the expression of specific properties through non-covalent interactions. A large variety of peptide nanostructures has been designed employing different aspects of these non-covalent interactions, such as dispersive interactions, hydrogen bonding or ionic interactions. Here we demonstrate the sequence-controlled fabrication of molecular nanostructures using peptides as bio-organic building blocks for two-dimensional (2D) self-assembly. Scanning tunnelling microscopy reveals changes from compact or linear assemblies (angiotensin I) to long-range ordered, chiral honeycomb networks (angiotensin II) as a result of removal of steric hindrance by sequence modification. Guided by our observations, molecular dynamic simulations yield atomistic models for the elucidation of interpeptide-binding motifs. This new approach to 2D self-assembly on surfaces grants insight at the atomic level that will enable the use of oligo- and polypeptides as large, multi-functional bio-organic building blocks, and opens a new route towards rationally designed, bio-inspired surfaces.

Chemical functionalization of graphene is achieved by hyperthermal reaction with azopyridine molecular ions. The one-step, room temperature process takes place in high vacuum (10(-7) mbar) using an electrospray ion beam deposition (ES-IBD) setup. For ion surface collisions exceeding a threshold kinetic energy of 165 eV, molecular cation beams of 4,4'-azobis(pyridine) covalently attach to chemical vapor deposited (CVD) graphene. A covalent functionalization degree of 3% of the carbon atoms of graphene is reached after 3-5 h of ion exposure of 2 × 10(14) azopyridinium/cm(2) of which 50% bind covalently. This facile approach for the controlled modification of graphene extends the scope of candidate species that would not otherwise react via existing conventional methods.

Aiming at future technological applications, we describe the interface and the thin film processes of a pyrene-substituted nitronyl nitroxide radical deposited on Al2O3(11-20) single crystals. Electronic properties, chemical environment at the interface, and morphology of the thin films have been investigated by a multitechnique approach. Spectroscopic and morphologic analyses indicate a Stranski-Krastanov growth mode and weak physisorption of the molecules on the surface. The deposition does not affect the paramagnetic character of the molecules. The results presented in this paper show not only that the investigated system is a promising candidate as a model for understanding thin film processes in purely organic-based magnets, but its characteristics are worth its future use in electronics, because the radical character of the molecules is completely preserved in the thin films.

Ionic bonding in supramolecular surface networks is a promising strategy to self-assemble nanostructures from organic building blocks with atomic precision. However, sufficient thermal stability of such systems has not been achieved at metal surfaces, likely due to partial screening of the ionic interactions. We demonstrate excellent stability of a self-assembled ionic network on a metal surface at elevated temperatures. The structure is characterized directly by atomic resolution scanning tunneling microscopy (STM) experiments conducted at 165 °C showing intact domains. This robust nanometer-scale structure is achieved by the on-surface reaction of a simple and inexpensive compound, sodium chloride, with a model system for carboxylate interactions, terephthalic acid (TPA). Rather than distinct layers of TPA and NaCl, angle resolved X-ray photoelectron spectroscopy experiments indicate a replacement reaction on the Cu(100) surface to form Na-carboxylate ionic bonds. Chemical shifts in core level electron states confirm a direct interaction and a +1 charge state of the Na. High-temperature STM imaging shows virtually no fluctuation of Na-TPA island boundaries, revealing a level of thermal stability that has not been previously achieved in noncovalent organic-based nanostructures at surfaces. Comparable strength of intermolecular ionic bonds and intramolecular covalent bonds has been achieved in this surface system. The formation of these highly ordered structures and their excellent thermal stability is dependent on the interplay of adsorbate-substrate and ionic interactions and opens new possibilities for ionic self-assemblies at surfaces with specific chemical function. Robust ionic surface structures have potential uses in technologies requiring high thermal stability and precise ordering through self-assembly.

The plasmonic properties of self-assembled layers of rod- and branched-shaped gold nanoparticles were investigated using optical techniques. Nanoparticles were synthesized by a surfactant-guided, seed-mediated growth method. The layers were obtained by gradual assembly of nanoparticles at the interface between a polar and a nonpolar solvent and were transferred to a glass slide. Polarization and angle-dependent extinction measurements showed that the layers made of gold nanorods were governed by an effective medium response. The response of the layers made by branched gold particles was characterized by random light scattering. Microscopic mapping of the spatial mode structure demonstrates a uniform optical response of the nanoparticle layers down to a submicrometer length scale.