Search

Metal pollutants released from motor vehicles are deposited in roadside environments. Metals are non-biodegradable and biomagnify in the food chain causing significant health hazards at all levels of the ecosystem. Hence, management of contaminated roadside verges is critically important and should be kept in mind while planning specific management strategies of such areas. Native vegetation could help to decontaminate heavy metal polluted soils in the best sustainable way. Therefore, this study was designed to assess the potential of Nerium oleander to accumulate heavy metals commonly released by automobiles such as Pb, Cd, Ni, and Zn along with various C and N compounds from five different locations along a busy road in Punjab, Pakistan, during summer and winter seasons. N. oleander showed the ability to absorb C, N, and heavy metals Pb and Cd; the maximum concentration of Pb and Cd was 8.991 mg kg

In the present investigation, nanochitosan-polyurethane dispersions (NCS-PUs) were prepared via polymerization process and applied on polyester cotton fabric (PCF) as a finishing agent. A prepolymer of PU with NCO functionality was synthesized using isophorone diisocyanate (IPDI), polyethylene glycol (PEG) and DMPA (2, 2-dimethylol propionic acid) was extended with NCS. The structural characterization of NCS-PUs was monitored by FTIR analysis. Pad dry cure technique was adopted for the application of NCS-PUs on pre-dyed and printed PCF samples. The PCF samples (dyed and printed) were tested for antibacterial activity, Ultraviolet protection factor (UPF) and tear & tensile strength properties. The UPF values in case of 10% PUB1 to PUB6 application was recorded to be 40.5, 42.30, 44.10, 47.50, 54.30 and 37.80, respectively, whereas the tensile strength improved up to 8.1% in case of 10% NCS-PUs application and these value was increased when 20% NCS-PUs was applied. Antimicrobial activity was evaluated against Gram positive and negative strains (S. aureus and E. coli). The PCF samples finished with NCS-PUs showed higher antimicrobial activity, protection against UV and tensile strength versus unfinished sample with NCS-PUs. Results revealed that the NCS-PUs significantly improved the properties of PCF (both of dyed and printed samples), hence, the NCS-PUs can be applied as finishing agent to enhance the antimicrobial activity along with protection from UV radiation.

Contamination of soils with heavy metals (HMs) caused serious problems because plants tend to absorb HMs from the soil. In view of HM hazards to plants as well as agro-ecosystems, we executed this study to assess metal toxicity to mung bean (Vigna radiata) plants cultivated in soil with six treatment levels of cadmium (Cd) and nickel (Ni) and to find metal tolerant variety, i.e., M-93 (V1) and M-1(V2) with multifarious plant biochemical and physiological attributes. Increasing doses of Cd and Ni inhibited plant growth and photosynthesis and both varieties showed highly significant differences in the morpho-physiological attributes. V2 showed sensitivity to Cd and Ni treatments alone or in combination. Tolerance indices for attributes presented a declined growth of Vigna plants under HM stress accompanied by highly significant suppression in gas exchange characteristics. Of single element applications, the adverse effects on mung bean were more pronounced in Cd treatments. V1 showed much reduction in photosynthesis attributes except sub-stomatal CO2 concentration in all treatments compared to V2. The yield attributes, i.e., seed yield/plant and 100-seed weight, were progressively reduced in T5 for both varieties. In combination, we have observed increased mobility of Cd and Ni in both varieties. The results showed that water use efficiency (WUE) generally increased in all the treatments for both varieties compared to control. V2 exhibited less soluble sugars and free amino acids compared to V1 in all the treatments. Similarly, we recorded an enhanced total free amino acid contents in both varieties among all the metal treatments against control plants. We conclude that combinatorial treatment proved much lethal for Vigna plants, but V1 performed better than V2 in counteracting the adverse effects of Cd and Ni.

Vehicle emissions create corridors of increased carbon and nitrogen concentrations near highways that influence surrounding ecosystems. This study used the leaves of a variety of wild plant species...

The present study was carried out to evaluate the effects of different fungal species on the metal uptake from paper sludge by Hemarthria compressa L. Paper sludge (PS) in various concentrations (0, 30% and 60%) were used with four treatments of two fungal species (F0 = Control, F1 = Aspergillus niger, F2 = Trichoderma pseudokoningii, F3 = A. niger + T. pseudokoningii). Paper sludge as rooting medium steadily influenced growth and physio-biochemical attributes of H. compressa in F0. Results revealed discrete variations in growth attributes with different PS concentrations and each fungal treatment. The maximum damages in ionic homeostasis (Na+, K+, Ca2+, Mg2+) due to PS toxicity were evident in parallel with declined chlorophyll concentration. The highest growth, total chlorophyll and biomass of the plants were observed when PS was treated with combined fungal strains (F3). Translocation factor decreased with F3 that is indicative of changes in Cd, Pb, and Cu movement to shoot from root. The plants with combined fungal treatment also showed greater catalase (CAT), superoxide dismutase (SOD), and peroxidase (POD) activity. Ions, such as Ca, Mg, and Na, also increased gradually with combined fungal treatment. The correlation matrix displayed a close association among diverse fungal and PS levels with multiple plant attributes. PCA-Biplot confirmed the outcome of correlational analyses among different characters of H. compressa. The combined fungal mediate the extraction of heavy metals from the paper sludge by H. compressa recommends the high accumulation of heavy metal (HM) and possible reutilization of metal free sludge as a fertilizer, for application in cultivated fields. Furthermore, the effects of fungal species on HM attenuation in PS are linear and can be used in different habitats. Advancement in such research work will also be helpful in understanding the mechanisms and enhancing the ability of other native microbes to remediate metals.

Contamination of soils with heavy metals (HMs) caused serious problems because plants tend to absorb HMs from the soil. In view of HM hazards to plants as well as agro-ecosystems, we executed this study to assess metal toxicity to mung bean (Vigna radiata) plants cultivated in soil with six treatment levels of cadmium (Cd) and nickel (Ni) and to find metal tolerant variety, i.e., M-93 (V

Xanthium strumarium was chosen in this study to evaluate its phytoremediation capacity for cadmium, lead, nickel and zinc metals. Five different sites were selected on Faisalabad–Sargodha road (FSR), Pakistan, to monitor the levels of cadmium, lead, nickel and zinc. Leaf and root samples were collected concurrently with soil samples to study the accumulation and tolerance of these metals in X. strumarium. To examine the health of X. strumarium, photosynthetic pigments, free amino acids concentration and total antioxidant activity were also tested. Highly significant concentrations of all metals were recorded in the soil and X. strumarium leaves and roots at all sites as compared to the control. On the average, X. strumarium leaves accumulated 0.27 ± 0.01 mg kg−1 cadmium, 3.33 ± 0.16 mg kg−1 lead, 54.5 ± 1.02 mg kg−1 zinc and 5.85 ± 0.11 mg kg−1 nickel from the soils that have average metal concentration of 0.25 ± 0.24 mg kg−1 cadmium, 3.38 ± 0.29 mg kg−1 lead, 118.7 ± 1.04 mg kg−1 zinc and 4.89 ± 0.12 mg kg−1 nickel. Overall, a slight variation in photosynthetic pigments was noted; however, plants growing at sites with higher metal concentrations exhibited reduced photosynthetic pigments. Increased total antioxidant activity and free amino acids were recorded. X. strumarium leaves showed high accumulation capacity for nickel, cadmium and lead as shown by their highest bio-concentration factors, i.e., 1.651, 1.574 and 1.048 for these metals, respectively. Significant correlations were also found in combinations of these metals in leaves and soils. This study identified X. strumarium as a strong phytoremediator of heavy metals at contaminated roadsides and potentially other areas.

Climate change and the consequent alteration in agricultural circumstances enhance the susceptibility of fresh water use particularly in water-scarce regions. Marginal quality water reuse is a common alternative practice but possible perils of metal accretion in plant parts are mostly ignored. The present research aimed to probe the impact of treated wastewater (TWW) and untreated wastewater (UTWW) on metal accumulation in flower petals and their influence on essential oil contents of fragrant Rosa species (R. Gruss-an-teplitz, R. bourboniana, R. centifolia, R. damascena) in a peri-urban area of Faisalabad, Pakistan during January, 2017 to December, 2018. The mineral and chemical contents in canal water (CW) and TWW were less than recommended levels of national environmental quality standards (NEQS) for wastewater of Pakistan. The experimentally UTWW possessed higher electrical conductivity (EC), biological and chemical oxygen demand (BOD and COD), and some metals (Pb, Co, Cr) that were above the permissible levels. The experimental data revealed that except Cr other metals contents in the flower petals were less than the WHO recommended limits (for medicinal plants) under experimental irrigation regimes. Rosa centifolia and R. damascena possessed higher metal i.e. Zn, Cu, Pb, Cr, Co contents while Fe and Ni contents were higher in R. Gruss-an-Teplitz and R. bourboniana respectively. There were twelve constituents which were detected in essential oil by gas chromatography. Major constituents were phenyl ethyl alcohol, citronellol, geranyl acetate, γ- undelactone, methyl eugenol, and limonene whose share was 48.17%, 41.11%, 8.46%, 4.82%, 4.44%, and 4.15% respectively whereas concentrations of other 06 constituents were less than 3.7%. Phenyl ethyl alcohol, lion shared constituent of essential oil was found highest (48.17%) in R. Gruss-an-Teplitz whereas minimum level was recorded in R. damascena (28.84%) under CW. In contrast, citronellol (chief component of fragrance) was highest in R. damascena (41.11%) in UTWW while the lowest level was found in R. Gruss-an-Teplitz (17.41%) in CW. This study confirmed the variations in metal concentrations of Rosa species due to different absorbability of each metal in flower petals. It also indicates that wastewater did not affect the composition but there were quantitative differences in aroma constituents and chemical composition of essential oil.

Wastewater is an alternative to traditional sources of renewable irrigation water in agriculture, particularly in water-scarce regions. However, the possible risks due to heavy metals accumulation in plant tissues are often overlooked by producers. The present study aimed to identify heavy metals-induced structural modifications to roots of scented Rosa species that were irrigated with water of marginal quality. The chemical and mineral contents from the experimental irrigation canal water (control) and treated wastewater were below the limits recommended by the Pakistan Environmental Protection Agency (Pak-EPA) for medicinal plants. The experimentally untreated wastewater contained electrical conductivity (EC), chemical oxygen demand (COD), biological oxygen demand (BOD), and heavy metals (Co, Cu, Cd, Pb) that were above the recommended limits. The responses by wastewater-treated Rosa species (Rosa damascena, R. bourboniana, R. Gruss-an-Teplitz, and R. centifolia) were evaluated. The experimental data revealed that treated wastewater significantly increased the thickness of collenchyma (cortex and pith) and parenchyma tissues (vascular bundle, xylem, and phloem) of R. Gruss-an-Teplitz. Root dermal tissues (epidermis) of R. bourboniana also responded to treated wastewater. R. damascena and R. centifolia were the least affected species, under the experimental irrigation conditions. Collenchyma and dermal tissues were thicker in R. damascena and R. Gruss-an-Teplitz under untreated wastewater conditions. In parenchyma tissues, vascular bundles were thicker in R. damascena in untreated wastewater conditions, while the xylem and phloem of R. Gruss-an-Teplitz were thicker where treated wastewater was applied. In tissues other than the vascular bundle, the differences in anatomical metrics due to the experimental irrigation treatments were greater during the second year of the experiment than in the first year. The contents of metals other than chromium in the roots and stems of roses were below the WHO limits, under all of the experimental irrigation conditions. Rosa centifolia contained higher heavy metals content than the other experimental species, and heavy metals content was associated with anatomical changes due to the treatments. We conclude that, under conditions of wastewater irrigation, R. Gruss-an-Teplitz was highly resistant; R. damascena was moderately resistant while R. bourboniana and R. centifolia were the most susceptible to irrigation with marginal quality water. This is the first report of plant tissue responses to wastewater irrigation by the experimental species. Regarding the accumulation of heavy metals in rose plant tissues, the results confirm that untreated wastewater must be treated to grow Rosa species where water is scarce.