Search

Oligosaccharides from uronic acid-containing polysaccharides can be produced either by chemical or enzymatic degradation. The benefit of using enzymes, called lyases, is their high specificity for various glycosidic linkages. Lyases cleave the polysaccharide chain by an β-elimination reaction, yielding oligosaccharides with an unsaturated sugar (4-deoxy-l-erythro-hex-4-enepyranosyluronate) at the non-reducing end. In this work we have systematically studied acid degradation of unsaturated uronic acid oligosaccharides. Based on these findings, a method for preparing saturated oligosaccharides by enzymatic degradation of uronic acid-containing polysaccharides was developed. This results in oligosaccharides with a pre-defined distribution and proportion of sugar residues compared to the products of chemical degradation, while maintaining the chemical structure of the non-reducing end. The described method was demonstrated for generating saturated oligosaccharides of alginate, heparin and polygalacturonic acid. In the case of alginate, the ratio of hydrolysis rate of Δ-G and Δ-M linkages to that of G-G and M-M linkages, respectively, was found to be approximately 65 and 43, at pH* 3.4, 90 °C. Finally, this method has been demonstrated to be superior in the production of α-l-guluronate oligosaccharides with a lower content of β-d-mannuronate residues compared to what can be achieved using chemical depolymerization alone., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this article., (Copyright © 2024. Published by Elsevier Ltd.)

Alginate-based hydrogels with tunable mechanical properties are developed by chemical methylation of the polysaccharide backbone, which was performed either in homogeneous phase (in solution) or in heterogeneous phase (on hydrogels). Nuclear Magnetic Resonance (NMR) and Size Exclusion Chromatography (SEC-MALS) analyses of methylated alginates allow to identify the presence and location of methyl groups on the polysaccharide, and to investigate the influence of methylation on the stiffness of the polymer chains. The methylated polysaccharides are employed for the manufacturing of calcium-reticulated hydrogels for cell growth in 3D. The rheological characterization shows that the shear modulus of hydrogels is dependent on the amount of cross-linker used. Methylated alginates represent a platform to explore the effect of mechanical properties on cell activity. As an example, the effect of compliance is investigated using hydrogels displaying similar shear modulus. An osteosarcoma cell line (MG-63) was encapsulated in the alginate hydrogels and the effect of material compliance on cell proliferation and localization of YAP/TAZ protein complex is investigated by flow cytometry and immunohistochemistry, respectively. The results point out that an increase of material compliance leads to an increase of the proliferative rate of cells and correlates with the translocation of YAP/TAZ inside the cell nucleus., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Enzymatic depolymerization of seaweed polysaccharides is gaining interest for the production of functional oligosaccharides and fermentable sugars. Herein, we describe a thermostable alginate lyase that belongs to polysaccharide lyase family 17 (PL17) and was derived from an Arctic Mid-Ocean Ridge (AMOR) metagenomics data set. This enzyme, AMOR_PL17A, is a thermostable exolytic oligoalginate lyase (EC 4.2.2.26), which can degrade alginate, poly-β-d-mannuronate, and poly-α-l-guluronate within a broad range of pHs, temperatures, and salinity conditions. Site-directed mutagenesis showed that tyrosine Y251, previously suggested to act as a catalytic acid, indeed is essential for catalysis, whereas mutation of tyrosine Y446, previously proposed to act as a catalytic base, did not affect enzyme activity. The observed reaction products are protonated and deprotonated forms of the 4,5-unsaturated uronic acid monomer, Δ, two hydrates of DEH (4-deoxy-l- erythro -5-hexulosuronate), which are formed after ring opening, and, finally, two epimers of a 5-member hemiketal called 4-deoxy-d- manno -hexulofuranosidonate (DHF), formed through intramolecular cyclization of hydrated DEH. The detection and nuclear magnetic resonance (NMR) assignment of these hemiketals refine our current understanding of alginate degradation. IMPORTANCE The potential markets for seaweed-derived products and seaweed processing technologies are growing, yet commercial enzyme cocktails for complete conversion of seaweed to fermentable sugars are not available. Such an enzyme cocktail would require the catalytic properties of a variety of different enzymes, where fucoidanases, laminarinases, and cellulases together with endo- and exo-acting alginate lyases would be the key enzymes. Here, we present an exo-acting alginate lyase that efficiently produces monomeric sugars from alginate. Since it is only the second characterized exo-acting alginate lyase capable of degrading alginate at a high industrially relevant temperature (≥60°C), this enzyme may be of great biotechnological and industrial interest. In addition, in-depth NMR-based structural elucidation revealed previously undescribed rearrangement products of the unsaturated monomeric sugars generated from exo-acting lyases. The insight provided by the NMR assignment of these products facilitates future assessment of product formation by alginate lyases., (Copyright © 2021 American Society for Microbiology.)

Alginates are one of the major polysaccharide constituents of marine brown algae in commercial manufacturing. However, the content and composition of alginates differ according to the distinct parts of these macroalgae and have a direct impact on the concentration of guluronate and subsequent commercial value of the final product. The Azotobacter vinelandii mannuronan C-5 epimerases AlgE1 and AlgE4 were used to determine their potential value in tailoring the production of high guluronate low-molecular-weight alginates from two sources of high mannuronic acid alginates, the naturally occurring harvested brown algae ( Ascophyllum nodosum, Durvillea potatorum , Laminaria hyperborea and Lessonia nigrescens ) and a pure mannuronic acid alginate derived from fermented production of the mutant strain of Pseudomonas fluorescens NCIMB 10,525. The mannuronan C-5 epimerases used in this study increased the content of guluronate from 32% up to 81% in both the harvested seaweed and bacterial fermented alginate sources. The guluronate-rich alginate oligomers subsequently derived from these two different sources showed structural identity as determined by proton nuclear magnetic resonance ( 1 H NMR), high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) and size-exclusion chromatography with online multi-angle static laser light scattering (SEC-MALS). Functional identity was determined by minimum inhibitory concentration (MIC) assays with selected bacteria and antibiotics using the previously documented low-molecular-weight guluronate enriched alginate OligoG CF-5/20 as a comparator. The alginates produced using either source showed similar antibiotic potentiation effects to the drug candidate OligoG CF-5/20 currently in development as a mucolytic and anti-biofilm agent. These findings clearly illustrate the value of using epimerases to provide an alternative production route for novel low-molecular-weight alginates.

The recent emergence of resistance to colistin, an antibiotic of last resort with dose-limiting toxicity, has highlighted the need for alternative approaches to combat infection. This study aimed to generate and characterise alginate oligosaccharide ("OligoG")-polymyxin (polymyxin B and E (colistin)) conjugates to improve the effectiveness of these antibiotics. OligoG-polymyxin conjugates (amide- or ester-linked), with molecular weights of 5200-12,800 g/mol and antibiotic loading of 6.1-12.9% w / w , were reproducibly synthesised. In vitro inflammatory cytokine production (tumour necrosis factor alpha (TNFα) ELISA) and cytotoxicity (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) of colistin (2.2-9.3-fold) and polymyxin B (2.9-27.2-fold) were significantly decreased by OligoG conjugation. Antimicrobial susceptibility tests (minimum inhibitory concentration (MIC), growth curves) demonstrated similar antimicrobial efficacy of ester- and amide-linked conjugates to that of the parent antibiotic but with more sustained inhibition of bacterial growth. OligoG-polymyxin conjugates exhibited improved selectivity for Gram-negative bacteria in comparison to mammalian cells (approximately 2-4-fold). Both OligoG-colistin conjugates caused significant disruption of Pseudomonas aeruginosa biofilm formation and induced bacterial death (confocal laser scanning microscopy). When conjugates were tested in an in vitro "time-to-kill" (TTK) model using Acinetobacter baumannii , only ester-linked conjugates reduced viable bacterial counts (~2-fold) after 4 h. Bi-functional OligoG-polymyxin conjugates have potential therapeutic benefits in the treatment of multidrug-resistant (MDR) Gram-negative bacterial infections, directly reducing toxicity whilst retaining antimicrobial and antibiofilm activities.

Bacterial alginate initially consists of 1-4-linked β-D-mannuronic acid residues (M) which can be later epimerized to α-L-guluronic acid (G). The family of AlgE mannuronan C-5-epimerases from Azotobacter vinelandii has been extensively studied, and three genes putatively encoding AlgE-type epimerases have recently been identified in the genome of Azotobacter chroococcum. The three A. chroococcum genes, here designated AcalgE1, AcalgE2 and AcalgE3, were recombinantly expressed in Escherichia coli and the gene products were partially purified. The catalytic activities of the enzymes were stimulated by the addition of calcium ions in vitro. AcAlgE1 displayed epimerase activity and was able to introduce long G-blocks in the alginate substrate, preferentially by attacking M residues next to pre-existing G residues. AcAlgE2 and AcAlgE3 were found to display lyase activities with a substrate preference toward M-alginate. AcAlgE2 solely accepted M residues in the positions - 1 and + 2 relative to the cleavage site, while AcAlgE3 could accept either M or G residues in these two positions. Both AcAlgE2 and AcAlgE3 were bifunctional and could also catalyze epimerization of M to G. Together, we demonstrate that A. chroococcum encodes three different AlgE-like alginate-modifying enzymes and the biotechnological and biological impact of these findings are discussed.

Polymer masked-unmasked protein therapy (PUMPT) uses conjugation of a biodegradable polymer, such as dextrin, hyaluronic acid, or poly(l-glutamic acid), to mask a protein or peptide's activity; subsequent locally triggered degradation of the polymer at the target site regenerates bioactivity in a controllable fashion. Although the concept of PUMPT is well established, the relationship between protein unmasking and reinstatement of bioactivity is unclear. Here, we used dextrin-colistin conjugates to study the relationship between the molecular structure (degree of unmasking) and biological activity. Size exclusion chromatography was employed to collect fractions of differentially degraded conjugates and ultraperformance liquid chromatography-mass spectrometry (UPLC-MS) employed to characterize the corresponding structures. Antimicrobial activity was studied using a minimum inhibitory concentration (MIC) assay and confocal laser scanning microscopy of LIVE/DEAD-stained biofilms with COMSTAT analysis. In vitro toxicity of the degraded conjugate was assessed using an 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. UPLC-MS revealed that the fully "unmasked" dextrin-colistin conjugate composed of colistin bound to at least one linker, whereas larger species were composed of colistin with varying lengths of glucose units attached. Increasing the degree of dextrin modification by succinoylation typically led to a greater number of linkers bound to colistin. Greater antimicrobial and antibiofilm activity were observed for the fully "unmasked" conjugate compared to the partially degraded species (MIC = 0.25 and 2-8 μg/mL, respectively), whereas dextrin conjugation reduced colistin's in vitro toxicity toward kidney cells, even after complete unmasking. This study highlights the importance of defining the structure-antimicrobial activity relationship for novel antibiotic derivatives and demonstrates the suitability of LC-MS to aid the design of biodegradable polymer-antibiotic conjugates.

With the present accessibility of algal raw material, microbial alginates as a source for strong gelling material are evaluated as an alternative for advanced applications. Recently, we have shown that alginate from algal sources all contain a fraction of very long G-blocks (VLG), that is, consecutive sequences of guluronic acid (G) residues of more than 100 residues. By comparing the gelling properties of these materials with in vitro epimerized polymannuronic acid (poly-M) with shorter G-blocks, but comparable with the G-content, we could demonstrate that VLG have a large influence on gelling properties. Hypothesized to function as reinforcement bars, VLG prevents the contraction of the gels during formation (syneresis) and increases the Young's modulus (strength of the gel). Here we report that these VLG structures are also present in alginates from Azotobacter vinelandii and that these polymers consequently form stable, low syneretic gels with calcium, comparable in mechanical strength to algal alginates with the similar monomeric composition. The bacterium expresses seven different extracellular mannuronan epimerases (AlgE1-AlgE7), of which only the bifunctional epimerase AlgE1 seems to be able to generate the long G-blocks when acting on poly-M. The data implies evidence for a processive mode of action and the necessity of two catalytic sites to obtain the observed epimerization pattern. Furthermore, poly-M epimerized with AlgE1 in vitro form gels with comparable or higher rigidity and gel strength than gels made from brown seaweed alginate with matching G-content. These findings strengthen the viability of commercial alginate production from microbial sources.

Enzymatic depolymerization of seaweed polysaccharides is gaining interest for the production of functional oligosaccharides and fermentable sugars. We describe a thermostable alginate lyase belonging to Polysaccharide Lyase family 7 (PL7), which can be used to degrade brown seaweed, Saccharina latissima, at conditions also suitable for a commercial cellulase cocktail (Cellic CTec2). This enzyme, AMOR_PL7A, is a β-d-mannuronate specific (EC 4.2.2.3) endoacting alginate lyase, which degrades alginate and poly mannuronate within a broad range of pH, temperature and salinity. At 65 °C and pH 6.0, its Km and k cat values for sodium alginate are 0.51 ± 0.09 mg/mL and 7.8 ± 0.3 s -1 respectively. Degradation of seaweed with blends of Cellic CTec2 and AMOR_PL7A at 55 °C in seawater showed that the lyase efficiently reduces viscosity and increases glucose solublization. Thus, AMOR_PL7A may be useful in development of efficient protocols for enzymatic seaweed processing.

Marine multicellular algae are considered promising crops for the production of sustainable biofuels and commodity chemicals. However, their commercial exploitation is currently limited by a lack of appropriate and efficient enzymes for converting alginate into metabolizable building blocks, such as 4-deoxy-L-erythro-5-hexoseulose uronic acid (DEH). Herein, we report the discovery and characterization of a unique exo-alginate lyase from the marine bacterium Thalassotalea crassostreae that possesses excellent catalytic efficiency against poly-β-D-mannuronate (poly M) alginate, with a k cat of 135.8 s -1 , and a 5-fold lower k cat of 25 s -1 against poly-α-L-guluronate (poly G alginate). We propose that this preference for poly M is due to a structural feature of the protein's active site. The mode of action and specificity of this enzyme has made it possible to design an effective and environmentally friendly process for the production of DEH and low molecular weight guluronate-enriched alginate.

A family of seven mannuronan C5-epimerases (AlgE1-AlgE7) produced by Azotobacter vinelandii is able to convert β-d-mannuronate (M) to its epimer α-l-guluronate (G) in alginates. Even sharing high sequence homology at the amino acid level, they produce distinctive epimerization patterns. The introduction of new G-blocks into the polymer by in vitro epimerization is a strategy to improve the mechanical properties of alginates as biomaterial. However, epimerization is hampered when the substrate is modified or in the gelled state. Here it is presented how native and engineered epimerases of varying size perform on steric hindered alginate substrates (modified or as hydrogels). Reducing the size of the epimerases enables the epimerization of otherwise inaccessible regions in the alginate polymer. Even though the reduction of the size affects the productive binding of epimerases to the substrate, and hence their activity, the smaller epimerases could more freely diffuse into calcium-alginate hydrogel and epimerize it., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Dynamic single-molecule force spectroscopy (SMFS), conducted most commonly using AFM, has become a widespread and valuable tool for understanding the kinetics and thermodynamics of fundamental molecular processes such as ligand-receptor interactions and protein unfolding. Where slowly forming bonds are responsible for the primary characteristics of a material, as is the case in cross-links in some polymer gels, care must be taken to ensure that a fully equilibrated bond has first formed before its rupture can be interpreted. Here we introduce a method, sliding contact force spectroscopy (SCFS), that effectively eliminates the kinetics of bond formation from the measurement of bond rupture. In addition, it permits bond rupture measurements in systems where one of the binding partners may be introduced into solution prior to binding without tethering to a surface. Taking as an example of a slowly forming bond, the "eggbox" junction cross-links between oligoguluronic acid chains (oligoGs) in the commercially important polysaccharide alginate, we show that SCFS accurately measures the equilibrated bond strength of the cross-link when one chain is introduced into the sample solution without tethering to a surface. The results validate the SCFS technique for performing single-molecule force spectroscopy experiments and show that it has advantages in cases where the bond to be studied forms slowly and where tethering of one of the binding partners is impractical.

To evaluate and develop methodologies for the extraction of gel-forming extracellular polymeric substances (EPS), EPS from aerobic granular sludge (AGS) was extracted using six different methods (centrifugation, sonication, ethylenediaminetetraacetic acid (EDTA), formamide with sodium hydroxide (NaOH), formaldehyde with NaOH and sodium carbonate (Na2CO3) with heat and constant mixing). AGS was collected from a pilot wastewater treatment reactor. The ionic gel-forming property of the extracted EPS of the six different extraction methods was tested with calcium ions (Ca 2+ ). From the six extraction methods used, only the Na2CO3 extraction could solubilize the hydrogel matrix of AGS. The alginate-like extracellular polymers (ALE) recovered with this method formed ionic gel beads with Ca 2+ . The Ca 2+ -ALE beads were stable in EDTA, formamide with NaOH and formaldehyde with NaOH, indicating that ALE are one part of the structural polymers in EPS. It is recommended to use an extraction method that combines physical and chemical treatment to solubilize AGS and extract structural EPS.

One of the principal roles of alginate, both natively and in commercial applications, is gelation via Ca(2+)-mediated crosslinks between blocks of guluronic acid. In this work, single molecule measurements were carried out between well-characterised series of nearly monodisperse guluronic acid blocks ('oligoGs') using dynamic force spectroscopy. The measurements provide evidence that for interaction times on the order of tens of milliseconds the maximum crosslink strength is achieved by pairs of oligoGs long enough to allow the coordination of 4Ca(2+) ions, with both shorter and longer oligomers forming weaker links. Extending the interaction time from tens to hundreds of milliseconds allows longer oligoGs to achieve much stronger crosslinks but does not change the strength of individual links between shorter oligoGs. These results are considered in light of extant models for the onset of cooperative crosslinking in polyelectrolytes and an anisotropic distribution of oligoGs on interacting surfaces and provide a timescale for the formation and relaxation of alginate gels at the single crosslink level., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The bacterium Azotobacter vinelandii produces a family of seven secreted and calcium-dependent mannuronan C-5 epimerases (AlgE1-7). These epimerases are responsible for the epimerization of β-D-mannuronic acid (M) to α-L-guluronic acid (G) in alginate polymers. The epimerases display a modular structure composed of one or two catalytic A-modules and from one to seven R-modules having an activating effect on the A-module. In this study, we have determined the NMR structure of the three individual R-modules from AlgE6 (AR1R2R3) and the overall structure of both AlgE4 (AR) and AlgE6 using small angle x-ray scattering. Furthermore, the alginate binding ability of the R-modules of AlgE4 and AlgE6 has been studied with NMR and isothermal titration calorimetry. The AlgE6 R-modules fold into an elongated parallel β-roll with a shallow, positively charged groove across the module. Small angle x-ray scattering analyses of AlgE4 and AlgE6 show an overall elongated shape with some degree of flexibility between the modules for both enzymes. Titration of the R-modules with defined alginate oligomers shows strong interaction between AlgE4R and both oligo-M and MG, whereas no interaction was detected between these oligomers and the individual R-modules from AlgE6. A combination of all three R-modules from AlgE6 shows weak interaction with long M-oligomers. Exchanging the R-modules between AlgE4 and AlgE6 resulted in a novel epimerase called AlgE64 with increased G-block forming ability compared with AlgE6., (© 2014 by The American Society for Biochemistry and Molecular Biology, Inc.)

Lyase-catalyzed degradation has been proposed as a more cell-friendly alternative to dissolution of alginate gels than using chelating agents. In this study, we investigated the effect of lyase specificity on degradation of alginate gels, including the effect of crosslinking ions with different affinity for the polymer. Degradation kinetics and products were analyzed. In particular, the degradation products were characterized using novel methods for alginate sequence determination by chromatography. Lyase-catalyzed gel disruption worked well for gels crosslinked with calcium, but was less effective when barium was included in the gel formulation. The importance of crosslinking of long G-blocks in maintaining the structural integrity of the gels was identified. The failure to degrade these long G-blocks, either due to protection of the G-blocks by strong ionic crosslinking or due to lack of lyase activity on G-G linkages, resulted in retained resistance to mechanical disruption of the gel., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Biocompatible hydrogels are very interesting for applications in, e.g., tissue engineering and for immobilization of cells, such as calcium-alginate gels where the calcium ions form specific interactions with the guluronic acid units. We here report on a new gelling system of chitosan and alginate containing only mannuronic acid (poly-M), which are prepared using the following steps: (i) mixing at a pH well above 7 where the chitosan is mainly uncharged; (ii) controlled lowering of the pH by adding the slowly hydrolyzing d-glucono-δ-lactone (GDL); (iii) formation of a homogeneous chitosan-alginate gel upon leaving the mixture at room temperature. Some properties of the new gelling system are demonstrated herein by adding controlled amounts of GDL to (i) a mixture of a polymeric and neutral-soluble chitosan with poly-M oligomers (MO) and (ii) a mixture of poly-M and neutral-soluble chitosan oligomers. The neutral-solubility of the polymeric chitosan is achieved by selecting a polymeric chitosan with an intermediate degree of acetylation of 40%, while the neutral-solubility of the fully de-N-acetylated chitosan oligomers (CO) is obtained by selecting oligomers with a chain length below 10. A proof of concept of the new gelling system is demonstrated by measuring the gel strengths of the polymeric chitosan-MO, and a poly-M-CO. The results show that the gel strength increases with decreasing the pH from neutral to 5, and that the gel strength decreases with increasing ionic strength, indicative of an ionic gel formation. Poly-M formed relatively strong gels with CO while an alginate highly enriched in Guluronic acid formed gels of very limited mechanical strength, suggesting the importance of the match in charge distances in the poly-M and chitosan, both with diequatorially linked sugar units in the (4)C1 conformation.

Distribution and proportion of β-D-mannuronic and α-L-guluronic acid in alginates are important for understanding the chemical-physical properties of the polymer. The present state of art methods, which is based on NMR, provides a statistical description of alginates. In this work, a method was developed that also gives information of the distribution of block lengths of each of the three block types (M, G, and MG blocks). This was achieved using a combination of alginate lyases with different substrate specificities, including a novel lyase that specifically cleaves diguluronic acid linkages. Reaction products and isolated fragments of alginates degraded with these lyases were subsequently analyzed with (1)H NMR, HPAEC-PAD, and SEC-MALLS. The method was applied on three seaweed alginates with large differences in sequence parameters (F(G) = 0.32 to 0.67). All samples contained considerable amounts of extremely long G blocks (DP > 100). The finding of long M blocks (DP ≥ 90) suggests that also algal epimerases act by a multiple attack mechanism. Alternating sequences (MG-blocks) were found to be much shorter than the other block types. In connection with method development, an oligomer library comprising both saturated and unsaturated oligomers of various composition and DP 2-15 was made.

Alginates are commercially valuable and complex polysaccharides composed of varying amounts and distribution patterns of 1-4-linked β-D-mannuronic acid (M) and α-L-guluronic acid (G). This structural variability strongly affects polymer physicochemical properties and thereby both commercial applications and biological functions. One promising approach to alginate fine structure elucidation involves the use of alginate lyases, which degrade the polysaccharide by cleaving the glycosidic linkages through a β-elimination reaction. For such studies one would ideally like to have different lyases, each of which cleaves only one of the four possible linkages in alginates: G-G, G-M, M-G, and M-M. So far no lyase specific for only G-G linkages has been described, and here we report the construction of such an enzyme by mutating the gene encoding Klebsiella pneumoniae lyase AlyA (a polysaccharide lyase family 7 lyase), which cleaves both G-G and G-M linkages. After error-prone PCR mutagenesis and high throughput screening of ∼7000 lyase mutants, enzyme variants with a strongly improved G-G specificity were identified. Furthermore, in the absence of Ca(2+), one of these lyases (AlyA5) was found to display no detectable activity against G-M linkages. G-G linkages were cleaved with ∼10% of the optimal activity under the same conditions. The substitutions conferring altered specificity to the mutant enzymes are located in conserved regions in the polysaccharide lyase family 7 alginate lyases. Structure-function analyses by comparison with the known three-dimensional structure of Sphingomonas sp. A1 lyase A1-II' suggests that the improved G-G specificity might be caused by increased affinity for nonproductive binding of the alternating G-M structure.

Oligosaccharides of ([4)-beta-d-ManpA-(-->](n)) with a degree of polymerisation (DP) of 5, 10 and 15 were generated by partial acid hydrolysis of alginate mannuronan. These were subsequently purified by a combination of size-exclusion chromatography and semi-preparative high-performance anion-exchange chromatography with pulsed amperometric detection. The purity of the isolated oligosaccharides was greater than 96%. With automated operation of the chromatography system, milligram quantities can be generated over a period of a few days. Thus, our methodology now offers some significant advantages over earlier, including our own, protocols focused on uronic acid oligomers, where the final products are either not as pure or more starting material is needed to generate an equivalent yield of product. Removal of ammonium ions in collected fractions after size-exclusion chromatography and prior to freeze-drying was found to be essential to prevent the formation of imines and subsequent Maillard browning products.

Alginates comprised of essentially alternating units of mannuronic (M) acid-guluronic (G) acid (MG-alginate), and G-blocks isolated from a seaweed where subjected to partial acid hydrolysis at pH 3.5 The chain-length distribution of oligosaccharides in the hydrolysate were investigated by statistical analysis after their separation with high-performance anion-exchange chromatography and pulsed amperometric detection (HPAEC-PAD). Simulated depolymerisation of the MG-alginate provided an estimate of the ratio between two acid hydrolysis rate constants (p=8.3+/-1) and the average distribution of the MM linkages in the original sample of polysaccharide chains. In conclusion, we found HPAEC-PAD together with statistical analysis was a useful method to investigate the fine structure and some properties of binary polysaccharides.