Search

The global utilization of RES, particularly geothermal energy, is rising and the inefficient nature of geothermal cycles necessitates recovering lost heat. This research proposes a combined power generation cycle that simulates integrating a trans-critical CO2 cycle with a single flash geothermal cycle, utilizing the engineering equation solver. The study contrasts the system's performance between two operating states: "Without Economizer" and "With Economizer". The investigation analyzes the impact of an economizer on key output parameters, including energy efficiency, exergy efficiency, and net power output. In the "With Economizer" operating state, the net power output experiences a noticeable increase from 201.5 kW to 204.7 kW, resulting in a 1.58% enhancement in the performance of the "With Economizer" system. The energy efficiency metric demonstrates a corresponding improvement, rising by 1.55% from 3.28% in the "Without Economizer" system to 3.331% in the "With Economizer" system, aligning with the principles of the First law of thermodynamics. Furthermore, the energy efficiency, expressed as a percentage of energy units, shows an increase from 16.3% in the "Without Economizer" system to 16.56% in the "With Economizer" system, representing a 1.595% improvement based on the Second law of thermodynamics or exergy. Regarding cost analysis, the study identifies the optimal separator pressure value for the system without an economizer, equivalent to 23. This configuration achieves a total cost rate of 01 $ per GJ. Conversely, in the system with an economizer, the optimal pressure value for the production cost rate is 322.4 kPa, resulting in a cost rate of 23.57 $ per GJ. [ABSTRACT FROM AUTHOR]

A fuel/oxidizer mixture can be burned using a colourless distributed combustion (CDC) process to obtain low emissions and homogeneous combustion. As an alternative way, a perforated burner can be designed to achieve homogeneous combustion and low emissions without changing the combustion performance by having entrainment effects on the combustion chamber. In this study, computational fluid dynamics (CFD) 3D modelling was performed in a perforated burner for ammonia/methane fuels in order to obtain the distributed regime and focus on the entrainment effects. In numerical analysis, the eddy break‐up was used as combustion model, k‐Ɛ as turbulence model, and P‐1 as radiation model. In this study, 10% and 20% entrainment rates were provided from the flame holder wall of the perforated burner. The effects of entrainment rates on temperature, velocity, and NOX emission values were examined. According to the results, when the entrainment rate was increased from 10% to 20%, the overall temperature values of ammonia and methane combustion slightly increased by approximately 1.0%, while on the other hand the maximum temperature levels in the near burner zone decreased by about 5.0%. The findings demonstrated that temperature and velocity distributions got more uniform and the flame zones became thinner. This provided a more colourless and invisible flame appearance. In this way, an improvement in the thermal field has been achieved. In conclusion, when the effect of the distributed regime on NOX emission levels was examined, it has been noted that entrainment effects enable the achievement of low emission levels (approximately 9.0%). [ABSTRACT FROM AUTHOR]