Search

The quality of dried Bilih fish can be determined on the basis of its water and protein content. The dried Bilih fish produced by Small Medium Enterprise (MSE) Mina Lestari has a high water content of 24% and a low protein content of 35%. These problems were addressed using a proposed parabolic-type drying machine, whose operating system is affected by drying duration, drying tray height, tray rotation, drying layer material and rack quantity and capacity. The results showed that water content decreased to 11.98% and that protein concentration increased to 64.02%. The sensitivity analysis indicated that changes in the values of quality attributes were minimally sensitive to alterations in the weights attached to water and protein content. The optimal combination of factor levels would remain consistent even under a weight of ≤0.83286 ascribed to water content, indicating that a weight ranging from 0 to 0.83286 for this substance exhibits little sensitivity to the initial decision on level factors.

Kualitas mekanis kain tenun dapat diidentifikasi antara lain dari kekuatan tarik kain dan kekuatan sobek kain dengan fungsi obyektif Larger the Better (LTB). Upaya untuk meningkatkan kualitas kain tenun dapat dilakukan melalui eksperimen dengan mengendalikan faktor-faktor yang dapat mempengaruhinya yaitu tetal benang lusi (A), tetal benang pakan (B), kehalusan benang lusi (C), kehalusan benang pakan (D), twist benang lusi (E), twist benang pakan (F), panjang staple serat sisal G). Kombinasi level faktor yang menghasilkan kualitas kain yang optimal diperoleh pada kombinasi level faktor A2, B2, C1, D1, E1, F2, dan G1, yang berarti sistem bekerja pada tetal benang lusi 62 helai/inchi, tetal benang pakan 58 helai/inchi, kehalusan benang lusi 30 Ne1, kehalusan benang pakan 30/2 Ne1, twist benang lusi 20 twist/inchi, twist benang pakan 24 twist/inchi dan panjang staple serat sisal 50 cm. Kombinasi ini mampu menaikkan kekuatan tarik kain sebesar 240,00 N (naik 28,34%) dan kekuatan sobek kain sebesar 20,150 N(naik 31,91%) terhadap kondisi awal. Kombinasi level faktor optimal tidak sensitif terhadap perubahan bobot atribut kualitas tetapi sensitif terhadap perubahan biaya utilitas produk

The growth of industrial sector has increased. Especially for leather industries. Production of UPT Pengolahan Kulit Ladong in the form of wet blue tanned skin will be expected to cover some of the needs of national market demand. The purpose of this research is to analyze the operational feasibility of UPT Pengolahan Kulit Ladong from legal aspect, market aspect, technical aspect, management aspect, and also financial aspect. The object of this research is at UPT Pengolahan Kulit Ladong, Aceh Ladong Industrial Estate, Aceh Besar Regency, Aceh Province. The method to be used for research is techno-economical method. Data analysis consists of legal aspect analysis, market aspect analysis, technical aspect analysis, management aspect analysis, and financial aspect analysis. The results of this study indicate that in terms of legal aspects able to meet the requirements of legality, the market aspect seen from the still many unmet needs of skin that demand reached 20 million pieces of skin per year for the national market, technical aspects, to produce wet blue tanned skin can use the machine and equipment that already exist in UPT Pengolahan Kulit Ladong and already installed, management aspect that is with the availability of raw materials, it is expected when human resources are available also for UPT immediately operated and produce, and financial aspect where MARR: 10% , NPV: Rp. 286.089.235 (NPV> 0), BEP: 96%, PP: 4 Years 5 Months 19 Days, and IRR: 12.28%, so for the operation and production of UPT Pengolahan Kulit Ladong is feasible to run based on the analysis of whole aspects.

OB (Outside Broadcasting) Van Radio Gemilang FM Magelang is a vehicle that has studio facilities and transmitting equipment as a studio and broadcast radio transmitters in general in the form of mini and specific functions. From various user inputs such as broadcast division, operator and technical part there are development opportunities that can be done to further improve the quality of facilities and devices according to the needs of coverage and technology activities in the future. This study involved 30 respondents who are competent in operating OB Van equipment. The method used in this development proposal using the measurement of technique parameters with QFD method up to level 2, there are 17 quality variables that are based on 8 Quality Dimension Garvin. From the results of research conducted there are 10 technical respond that can be done, with the most important development priority is software development and audio codec device to reduce digital audio transfer rate transfer with weight 297,7 and internet connection quality with weight 256,8.

Business development is an important thing for every company in order to adjust their self to follow the world sophistication. One of business sector is animation that now became more advance along the world development. In Indonesia the business move in the field of animation has not been so ogled by the investors. One big reason is because investors do not know the level of profit to be gained. This study aims to develop a business model company engaged in the field of animation that accompanied the information related to the benefits of investment that will be obtained. the Method used in this research are business model canvas (BMC) and SWOT analysis which being modified with cost analysis. The results obtained is "Kasat Mata" animation company that has been operating for more than 10 years should be develop its business model in order to provide a good profit for the company. Based on cost analysis with several investment feasibility parameters, the business development model is eligible. At the end, this research can be used as a reference for the company for developing their business model and also can be used by investors as a consideration for understanding the benefits.

Quality of yogurt could be determined based on its flavor and texture which could be tested using an organoleptic test. The quality objective of the yogurt flavor and texture is larger the better. As one of the intermediate products that could be processed to become various other products, the demand for yogurt is continuously increasing in Indonesia. Along with the increase in demand, the demand for quality of yogurt has also increased. In this study, experiments have been conducted to improve the quality of a yogurt product. The experiments were designed based on the Taguchi method with Multi Responses Signal to Noise (MRSN) that involves 7 factors consists of 6 controllable factors and 1 uncontrollable factor. Every factor has 2 levels of an experiment. The 6 controllable factors are heating temperature, heating duration, number of yogurt seeds, incubation temperature, incubation duration, number of sugars, while the uncontrollable factor is the weather condition. Result of the experiments showed when weight for flavor and texture is 0.437 and 0.563 respectively, the levels of the optimum factors are 950C for milk heating temperature, 20 minutes for the duration of milk heating process, 75 ml of yogurt seeds, 450C of the temperature of incubation, 6 hours of incubation duration and 12.5 grams of sugar weight. Based on the organoleptic test that conducted by a group of experienced testers, the new optimum factors combination could improve the yogurt’s quality in term of flavor and quality up to 16.24% and 11.37% respectively. It could be concluded that the proposed method could improve the quality of yogurt-based on preferences from the experienced testers that have been expressed by the weight of every quality response.

In determining the location of the shipyard, we must consider the factors that may significantly affect the sustainability of the company. With proper decision in selecting location, the operation process of shipyard will be effective and efficient. This research was conducted to help decision makers in analyzing the most potential location as the shipyard location by using integration of Analytic Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). Sensitivity analysis was also conducted to find out how big the main criteria weight changes can make the decision of the most potential for shipyard location changed. Case study in the selection of shipyard location at PT. Yasa Wahana Tirta Samudera was featured in this study. The most potential location outcome has been determined with some notes from the sensitivity analysis results.

Boyolali is one of a large city in central Java of Indonesia which its population increases annually by 31%. This city has several health clinic includes antenatal clinics, general clinic and a clinical laboratory. Currently the numbers of clinics to service people are 77 clinics only. In fact, this district still requires on the other of 318 clinics that have an adequate qualification. Therefore it is crucial to establish some new clinics for satisfying the specified requirements by the district government. The purpose of this study is to analyze the feasibility of establishing a new clinical laboratory as an expansion of the existing clinic based on aspects of market, technics and technology, management, financial, legal and environment. Survey was conducted by distributing questioner and interview to a potential stakeholder. Non parametric statistical analysis is done to test some hypotheses at 5% of significant level and 10% of margin of error. The result of this study shows that the establishment of clinic laboratory in Boyolali is feasible according to an analysis of whole aspects.

The quality of the electrical cable can be determined by resistance of insulator and conductor. There are some factors influencing the resistance of insulators and conductor. In this research, design of experiment, based on Taguchi method, is used to improve cable resistance. Because of having two responses, the optimization process uses the TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method. The result showed that the combination of levels of these factors could produce average insulator resistance of 95.70 Ω (increasing by 8.90 Ω), and the average resistance of the conductor 11.908 Ω (decreases down by 0.057 Ω). This optimal condition was obtained by combining the levels of factor A1 B1 C1 D2 E2 F1 G1, i.e. the system works at 140 rpm cabling speed, non core extruder speed 2.9 m/s, core extruder speed 2.9 m/s, cooling water temperature 20 °C, copper elongation 150 - 250, temperature for melting PVC 160 °C-165 °C and PVC density 154, 95-155 kg/m3. Sensitivity analysis indicated that weighting of product quality attributes were not sensitive to optimal factor level combinations.

The increaseing productivity is one of the competitive strategies that can be applied in a company in order to survive in an intense competitive presure. PT. XYZ is a textile industry manufacturing golf gloves and caddy bag. Every day, the company has a production target of 600 pieces per line. However, the desired target is not achieved that it will affect the delay in delivery of products to customers. In this research, a case study on implementing value stream mapping and Kaizen as the lean manufacturing concept is reported. The purpose of this study is to map the current production line, analyse and design the future value stream mapping by eliminating waste occured. It is obtained a lead time reduction as much as 440.4 seconds through eliminating 17 non-value added activities. Then, the output can be increased up to 21% which is equal to 502 pieces.

Quality of pellets, one form of animal feed, is not only measured by the nutritional content but also by its physical form. The physical strength of the pellet is determined from crushing and not easily moldy. Both quality characteristics are measured by reliability (pellet durability index) and resistance (water content percentage). In order to improve the quality of pellet, this study applied Multi Response Signal to Noise (MRSN) method. The weight of product quality attributes used will influence the method in determining the selected alternatives. To accommodate the weighting of dynamic product quality attributes, this study also ran weighting sensitivity analysis of product quality attributes. The results showed that the combination of factor level that produced the optimal pellet is A2, B1, C1, D1, E1, F1, G2 or combination of production process run with vapor pressure 1.9 bar, temperature conditioner 80 ° C, 3.5mm pellet diameter mold, cooler temperature 30 ° C, time in cooler 2 minutes, roller distance 1.5 cm, mixing time 175 seconds. This optimum combination can increase PDI percentage by 2.132% and decrease difference to target of water content by 0.234%. The optimum factor level combination will change if the weight for % PDI rises to be more than 0.77228 or decreases to be less than 0.00561, or in other words, the optimum combination will not change if the weight for % PDI is in the range 0.00561 - 0.77228.