Search

Calcium phosphate coatings containing brushite, calcite, and apatite were obtained by electrochemical deposition on titanium plates at room temperature, pH 5, constant current density 30 mA/cm2, from CaCO3/Ca(H2PO4)2 suspension electrolyte. A layer of amorphous apatite was deposited by the biomimetic method, by keeping the coatings in a concentrated modeling solution of Simulated Body Fluid. As a result of heat treatment at 800°C, apatite crystallized into hydroxyapatite, calcite decomposed to calcium oxide, and titanium was covered with a layer of titanium (IV) oxide. Preclinical studies on rats in vivo for 3 months showed increased osseointegration of plates with calcium phosphate coatings compared to uncoated titanium. Titanium implants with calcium phosphate coatings enriched with hydroxyapatite are promising for use in neurosurgery, dentistry, orthopedics due to the absence of inflammatory reactions from the body and increased osseointegration.

Calcium phosphate composite powders consisting of brushite and calcite were obtained in an aqueous medium from a CaCO3/Ca(H2PO4)2 suspension at Ca/P ratios of 1,33, 1,50, 1,67, pH 5–7, and maturation time of 21-50 days. Prolonged maturation (up to 68 days) of composite calcium phosphate powders led to a hydrolytic transition of brushite to octacalcium phosphate, the amount of which increased with increasing duration of the maturation stage. Drying calcium phosphate powders at 37°C for 24 h contributed to the partially transition of the metastable phase of octacalcium phosphate to apatite represented by amorphous calcium phosphate. The presence of vibrations of О–Н at 633 cm-1 as the shoulder on the IR spectra indicates the presence of apatite in calcium phosphate powders. The use of an electric current (20 mA/cm2, 3–20 min) for a local increase of the pH value made it possible to increase the amount of octacalcium phosphate in the composition of the composite powder, which has a characteristic rosette morphology of thin lamellar crystallites.

Calcium phosphate coatings on titanium plates were obtained by electrochemical deposition at room temperature in a two-electrode cell at a constant current density of 30 mA/sm^2 and a deposition time of 10 min, and brushite coatings from Ca(NO3)2 / NH4H2PO4 system at pH=4, and composite (brushite/calcite/apatite) coatings from the CаCO3 / Ca(H2PO4)2 system at pH=5. The apatite-forming ability (bioactivity) was determined by soaking both types of calcium phosphate coatings in a model SBF solution during month. The newly formed amorphized apatite layer after heat treatment at 800°С crystallized into β–tricalcium phosphate/hydroxyapatite on brushite coatings and hydroxyapatite on composite coatings due to the presence of calcite, whose carbonate ions initiate formation of hydroxyapatite, as well as apatite nanoparticles in the initial coating. The obtained calcium phosphate coatings are promising as biocoatings capable to increase osseointegration of metal implants.