Search

The paper presents the analysis of neurobiological data on the existence of the structure of a parallel-hierarchical network. Discussed method of parallel-hierarchical transformation based on population coding and its application for the pattern recognition task. Based on the analysis, we can conclude that using the methods proposed, it is possible to measure the geometric parameters and properties of images, which can significantly increase the efficiency of processing, in particular estimating the center of mass based on moment characteristics. Experimental results demonstrate that due to various destabilizing factors, accurately measuring the energy center coordinates of laser beam spot images is challenging. However, training the PI network and classifying the fragments into "good" and "bad" can considerably enhance the accuracy of these measurements.

In this paper, the types and principles of operation of fiber sensors based on fiber Bragg gratings (FBGs) are investigated. The influence of strain and temperature on the characteristics of FBGs is considered, and a method for the simultaneous measurement of these parameters is presented. Laboratory studies were carried out in the temperature range from +18 °C to +135 °C with an incremental step of 5 °C, with the actual temperature not deviating by more than ±0.5 °C. From the data obtained, the Bragg wavelength–temperature relationships were plotted, which showed a linear increase in wavelength with increasing temperature. This study shows that the use of two FBGs with a different sensitivity to temperature and strain allowed for the simultaneous measurement of both parameters. Numerical models created in the MATLAB R2022b environment confirmed the high accuracy and precision of the measurements. The FBG-based sensors demonstrated a robust performance in harsh environments, withstanding temperatures of up to 160 °C and high humidity, making them applicable in various industries and sciences. This work confirms that FBGs are a promising tool for accurate temperature and strain measurements, providing reliable results in harsh environments.

This article proposes an unequivocal method of labeling and numbering the cladding modes propagating in single-mode opticalwaveguides with tilted periodic structures. The unambiguous determination of individual propagating modes in this type of optical fiber is crucial for their use in sensory systems. The selection of the appropriate spectral range and mode determines the sensitivity and measuring range of tilted fiber Bragg grating (TFBG) sensors. The measurement methods proposed by individual research teams using TFBGs as transducers are usually based on the selection of specific modes. Unification of the labeling of modes and their numbering enables comparison of the basic metrological parameters of individual measurement methods and reproduction and verification of the proposed sensors and methods in the laboratories of other scientific and research centers.

Water resource pollution, particularly in river channels, presents a grave environmental challenge that necessitates a comprehensive and systematic approach encompassing assessment, forecasting, and effective management. This article provides a comprehensive exploration of the methodology and modeling tools employed to scrutinize the process of river channel pollution due to silting, rooted in the fundamental principles of hydrodynamics and pollutant transport dynamics. The study’s methodology seamlessly integrates numerical simulations with state-of-the-art neural network techniques, with a specific focus on the physics-informed neural network (PINN) method. This innovative approach represents a groundbreaking fusion of artificial neural networks (ANNs) and physical equations, offering a more efficient and precise means of modeling a wide array of complex processes and phenomena. The proposed mathematical model, grounded in the Euler equation, has been meticulously implemented using the Ansys Fluent software package, ensuring accuracy and reliability in the computations. In a pivotal phase of the research, a thorough comparative analysis was conducted between the results derived using the PINN method and those obtained using conventional numerical approaches with the Ansys Fluent software package. The outcomes of this analysis revealed the superior performance of the PINN method, characterized by the generation of smoother pressure fluctuation profiles and a significantly reduced computation time, underscoring its potential as a transformative modeling tool. The calculated data originating from this study assume paramount significance in the ongoing battle against river sedimentation. Beyond this immediate application, these findings also serve as a valuable resource for creating predictive materials pertaining to river channel silting, thereby empowering decision-makers and environmental stakeholders with essential information. The utilization of modeling techniques to address pollution concerns in river channels holds the potential to revolutionize risk management and safeguard the integrity of our vital water resources. However, it is imperative to underscore that the effectiveness of such models hinges on ongoing monitoring and frequent data updates, ensuring that they remain aligned with real-world conditions. This research not only contributes to the enhanced understanding and proactive management of river channel pollution due to silting but also underscores the pivotal role of advanced modeling methodologies in the preservation of our invaluable water resources for present and future generations.

For more then half a centre just the same approach to the simulation of the ductile crack formation was developed independently by the scientific communities of foreign and native researchers. The importance at these studies drastically increased. A set of the characteristics, according to which it is recommendly to perform the detail comparison of the existing fracture models is developed. The examples of the analysis of a number of the most popular models by means of obtaining and study their analytical expressions regarding the conditions of the plane state are given. The generalized relations of the know models and a number of separate relations are obtained.

The goal of this work is to create an intelligent internet of things (IoT)-based water quality monitoring system that will effectively monitor and analyze water parameters, collect real-time data, and provide critical information for decision-making in water management and environmental issues. Provide data transfer over wireless networks such as Wi-Fi or Bluetooth. The scientific novelty of the project lies in the development of an innovative system that combines modern IoT technologies and machine learning methods to provide comprehensive and accurate water quality monitoring, which is a significant contribution to water management and environmental safety. Five sensors are connected to Arduino-Mega 2560, ESP-32-E in a discrete manner to determine water parameters. The extracted sensor data is transferred to a desktop application developed on the Blynk App platform and compared with World Health Organization (WHO) standard values. Based on the measurement results, the proposed system can successfully analyze water parameters using the fast forest binary classifier to determine whether the tested water sample is potable or not. An intuitive user interface has been created that will allow users to monitor and analyze water quality data in real time. Provide the ability to create graphs, charts, and reports for visual presentation of data. [ABSTRACT FROM AUTHOR]

Based on the most significant features of the angular velocity dynamic measurements selected by the authors, the main phases of measuring information transformation were established, which allowed to obtain new mathematical models in the form of transformation function, equations for estimating quantization errors, analytical dependences for measuring range that are initial for modeling physical processes occurring in such digital measuring channels with microprocessor control. The process of converting an analog quantity into a binary code is analytically described, an equation for estimating the absolute and relative quantization error is obtained and a measurement range is established, which provides a normalized value of relative quantization error for angular velocity measuring channels with encoder. For the first time, the equation of sampling error was obtained, and it was proved that the limiting factor of the angular velocity measurements upper limit is not only the normalized value of quantization error, as previously thought, but also the value of sampling frequency fD. Therefore, to expand the measurement range (by increasing the upper limit of measurement), it is proposed not only to increase the speed of analog-to-digital conversion hardware, but also to reduce the execution time of software drivers for transmitting measurement information to RAM of microprocessor system. For this purpose, the analytical dependences of estimating the upper limit of measurement based on the value of the sampling step for different modes of measurement information transmission are obtained. The practical implementation of the software mode measurement information transmission is characterized by a minimum of hardware costs and maximum execution time of the software driver, which explains its low speed, and therefore provides a minimum value of the upper limit measurement. In the interrupt mode, the upper limit value of the angular velocity measurement is higher than in the program mode due to the reduction of the software driver’s execution time (tFl = 0). The maximum value of the angular velocity measurements upper limit can be achieved using the measurement information transmission in the mode of direct access to memory (DMA) by providing maximum speed in this mode (tFl = 0, tDR = 0). In addition, the application of the results obtained in the work allows at the design stage (during physical and mathematical modeling) to assess the basic metrological characteristics of the measuring channel, aimed at reducing the development time and debugging of hardware, software, and standardization of their metrological characteristics.

In this paper, the types and principles of operation of fiber sensors based on fiber Bragg gratings (FBGs) are investigated. The influence of strain and temperature on the characteristics of FBGs is considered, and a method for the simultaneous measurement of these parameters is presented. Laboratory studies were carried out in the temperature range from +18 °C to +135 °C with an incremental step of 5 °C, with the actual temperature not deviating by more than ±0.5 °C. From the data obtained, the Bragg wavelength–temperature relationships were plotted, which showed a linear increase in wavelength with increasing temperature. This study shows that the use of two FBGs with a different sensitivity to temperature and strain allowed for the simultaneous measurement of both parameters. Numerical models created in the MATLAB R2022b environment confirmed the high accuracy and precision of the measurements. The FBG-based sensors demonstrated a robust performance in harsh environments, withstanding temperatures of up to 160 °C and high humidity, making them applicable in various industries and sciences. This work confirms that FBGs are a promising tool for accurate temperature and strain measurements, providing reliable results in harsh environments. [ABSTRACT FROM AUTHOR]

Currently, there is a lot of interest in smart sensors and integrated composite materials in various industries such as construction, aviation, automobile, medical, information technology, communication, and manufacturing. Here, a new conceptual design for a force and temperature sensor system is developed using fiber-optic Bragg grating sensors embedded within composite materials, and a mathematical model is proposed that allows one to estimate strain and temperature based on signals obtained from the optical Bragg gratings. This is important for understanding the behaviors of sensors under different conditions and for creating effective monitoring systems. Describing the strain gradient distribution, especially considering different materials with different Young's modulus values, provides insight into how different materials respond to applied forces and temperature changes. The shape of the strain gradient distribution was obtained, which is a quadratic function with a maximum value of 1500 µ, with a maximum value at the center of the lattice and a symmetrically decreasing strain value with distance from the central part of the fiber Bragg grating. With the axial strain at the installation site of the Bragg grating sensor under applied force values ranging from 10 to 11 N, the change in strain was linear. As a result of theoretical research, it was found that the developed system with fiber-optic sensors based on Bragg gratings embedded in composite materials is resistant to external influences and temperature changes. [ABSTRACT FROM AUTHOR]

The article herein presents a new technique of controlling the system of collecting, storing and processing the information from the solar collectors, which might be applied to heating the industrial and domestic compartments for hot water supply. The most profitable usage of the solar collectors in the industry is replacement of a human interference with wireless sensor nets. The solar collector standard system consumes in average 30% of the heat due to poor control and configuration. Our monitoring and control system allows upgrade the performance of heating the industrial and domestic premises by means of solar collector for hot water supply.

The dynamic processes of the system of stabilization of the speed of the conveyor belt with a built-in hydraulic drive on the basis of an improved mathematical model, which takes into account the physical phenomena occurring in the hydraulic system during the action of alternating load. The influence of the main parameters of the hydraulic system and the magnitude of the load on the course of dynamic processes is analyzed and recommendations for their selection are formulated. The proposed scheme of the built-in hydraulic drive of a conveyor belt with system of stabilization of speed of movement automatically provides its uninterrupted work. The use of an additional hydraulic pump allowed to stabilize the speed of the conveyor belt to 7.8%, provided that the load on the working link is 2.3 times.

The concept of innovative educational environment of higher education establishment is considered and its main components are highlighted. The model of the integrated assessment of implementing innovations in higher education establishment is constructed. The developed model for assessing the level of development of the innovative educational environment of a specific higher education establishment during a certain period has been applied and a graphical analysis of the calculation results has been carried out.

The paper considers developed and offered an effective algorithm for solving the block-symmetrical tasks of polynomial computational complexity of data processing modular block-schemes designing. Currently, there are a large number of technologies and tools that allow you to create information systems of any class and purpose. To solve the problems of designing effective information systems, various models and methods are used, in particular, mathematical discrete programming methods. At the same time, it is known that such tasks have exponential computational complexity and can not always be used to solve practical problems. In this regard, there is a need to develop models and methods of the new class, which provide the solution of applied problems of discrete programming, aimed at solving problems of large dimensions. The work has developed and proposed block-symmetric models and methods as a new class of discrete programming problems that allow us to set and solve applied problems from various spheres of human activity. The issues of using the developed models are considered. and methods for computer-aided design of information systems (IS).

Copyright of Informatics Control Measurement in Economy & Environment Protection / Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska is the property of Lublin University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Vestnik KazUTB is the property of Kazakh University of Technology & Business and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Vestnik KazUTB is the property of Kazakh University of Technology & Business and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)