Search

We report the first detection of coherent elastic neutrino-nucleus scattering (CEvNS) on germanium, measured at the Spallation Neutron Source at Oak Ridge National Laboratory. The Ge-Mini detector of the COHERENT collaboration employs large-mass, low-noise, high-purity germanium spectrometers, enabling excellent energy resolution, and an analysis threshold of 1.5 keV electron-equivalent ionization energy. We observe a on-beam excess of 20.6$_{+7.1}^{-6.3}$ counts with a total exposure of 10.22 GWhkg and we reject the no-CEvNS hypothesis with 3.9 sigma significance. The result agrees with the predicted standard model of particle physics signal rate within 2 sigma., Comment: 7 pages, 5 figures

Let $\mathcal{X}$ be a smooth Fano threefold over the complex numbers of Picard rank $1$ with finite automorphism group. We give numerical restrictions on the order of the automorphism group $\mathrm{Aut}(\mathcal{X})$ provided the genus $g(\mathcal{X})\leq 10$ and $\mathcal{X}$ is not an ordinary smooth Gushel-Mukai threefold. More precisely, we show that the order $|\mathrm{Aut}(\mathcal{X})|$ divides a certain explicit number depending on the genus of $\mathcal{X}$. We use a classification of Fano threefolds in terms of complete intersections in homogeneous varieties and the previous paper of A. Gorinov and the author regarding the topology of spaces of regular sections., Comment: 47 pages. Comments welcome. v2: Section 7 is reworked and minor changes in some other places

We report on the development of thermal detectors based on large-size tellurium dioxide crystals (45x45x45 mm), containing tellurium enriched in $^{130}$Te to about 91%, for the CROSS double-beta decay experiment. A powder used for the crystals growth was additionally purified by the directional solidification method, resulting in the reduction of the concentration of impurities by a factor 10, to a few ppm of the total concentration of residual elements (the main impurity is Fe). The purest part of the ingot (the first ~200 mm, about 80% of the total length of the cylindrical part of the ingot) was determined by scanning segregation profiles of impurities and used for the $^{130}$TeO$_2$ powder production with no evidence of re-contamination. The crystal growth was verified with precursors produced from powder with natural Te isotopic composition, and two small-size (20x20x10 mm) samples were tested at a sea-level laboratory showing high bolometric and spectrometric performance together with acceptable $^{210}$Po content (below 10 mBq/kg). This growth method was then applied for the production of six large cubic $^{130}$TeO$_2$ crystals and 4 of them were taken randomly to be characterized at the Canfranc underground laboratory, in the CROSS-dedicated low-background cryogenic facility. Two $^{130}$TeO$_2$ samples were coated with a thin, $O$(100 nm), metal film in form of Al layer (on 4 sides) or AlPd grid (on a single side) to investigate the possibility to tag surface events by pulse-shape discrimination. Similarly to the small natural precursors, large-volume $^{130}$TeO$_2$ bolometers show high performance and even better internal purity ($^{210}$Po activity $\sim$ 1 mBq/kg, while activities of $^{228}$Th and $^{226}$Ra are below 0.01 mBq/kg), satisfying requirements for the CROSS and, potentially, next-generation experiments., Comment: Submitted to JINST; 22 pages, 11 figures, 4 tables

The CROSS experiment will search for neutrinoless double-beta decay using a specific mechanical structure to hold thermal detectors. The design of the structure was tuned to minimize the background contribution, keeping an optimal detector performance. A single module of the structure holds two scintillating bolometers (with a crystal size of 45x45x45 mm and a Ge slab facing the crystal's upper side) in the Cu frame, allowing for a modular construction of a large-scale array. Two designs are released: the initial $Thick$ version contains around 15% of Cu over the crystal mass (lithium molybdate, LMO), while this ratio is reduced to ~6% in a finer ($Slim$) design. Both designs were tested extensively at aboveground (IJCLab, France) and underground (LSC, Spain) laboratories. In particular, at LSC we used a pulse-tube-based CROSS facility to operate a 6-crystal array of LMOs enriched/depleted in $^{100}$Mo. The tested LMOs show high spectrometric performance in both designs; notably, the measured energy resolution is 5--7 keV FWHM at 2615 keV $\gamma$s, nearby the Q-value of $^{100}$Mo (3034 keV). Due to the absence of a reflective cavity around LMOs, a low scintillation signal is detected by Ge bolometers: ~0.3 keV (150 photons) for 1-MeV $\gamma$($\beta$) LMO-event. Despite that, an acceptable separation between $\alpha$ and $\gamma$($\beta$) events is achieved with most devices. The highest efficiency is reached with light detectors in the $Thick$ design thanks to a lower baseline noise width (0.05--0.09 keV RMS) when compared to that obtained in the $Slim$ version (0.10--0.35 keV RMS). Given the pivotal role of bolometric photodetectors for particle identification and random coincidences rejection, we will use the structure here described with upgraded light detectors, featuring thermal signal amplification via the Neganov-Trofimov-Luke effect, as also demonstrated in the present work., Comment: Submitted to JINST; 31 pages, 16 figures, 5 tables

The current experiments searching for neutrinoless double-$\beta$ ($0\nu\beta\beta$) decay also collect large statistics of Standard Model allowed two-neutrino double-$\beta$ ($2\nu\beta\beta$) decay events. These can be used to search for Beyond Standard Model (BSM) physics via $2\nu\beta\beta$ decay spectral distortions. $^{100}$Mo has a natural advantage due to its relatively short half-life, allowing higher $2\nu\beta\beta$ decay statistics at equal exposures compared to the other isotopes. We demonstrate the potential of the dual read-out bolometric technique exploiting a $^{100}$Mo exposure of 1.47 kg $\times$ y, acquired in the CUPID-Mo experiment at the Modane underground laboratory (France). We set limits on $0\nu\beta\beta$ decays with the emission of one or more Majorons, on $2\nu\beta\beta$ decay with Lorentz violation, and $2\nu\beta\beta$ decay with a sterile neutrino emission. In this analysis, we investigate the systematic uncertainty induced by modeling the $2\nu\beta\beta$ decay spectral shape parameterized through an improved model, an effect never considered before. This work motivates searches for BSM processes in the upcoming CUPID experiment, which will collect the largest amount of $2\nu\beta\beta$ decay events among the next-generation experiments.

The Multigenerator, Multidomain, and Multilingual Black-Box Machine-Generated Text Detection shared task in the SemEval-2024 competition aims to tackle the problem of misusing collaborative human-AI writing. Although there are a lot of existing detectors of AI content, they are often designed to give a binary answer and thus may not be suitable for more nuanced problem of finding the boundaries between human-written and machine-generated texts, while hybrid human-AI writing becomes more and more popular. In this paper, we address the boundary detection problem. Particularly, we present a pipeline for augmenting data for supervised fine-tuning of DeBERTaV3. We receive new best MAE score, according to the leaderboard of the competition, with this pipeline., Comment: New best score from the leaderboard, to appear in SemEval-2024 Workshop proceedings

Liquid metal catalysts (LMCats), primarily molten copper, have demonstrated their efficiency in the chemical vapour deposition (CVD) approach for synthesising high-quality, large-area graphene. However, their high melting temperatures limit broader applications. Reducing the temperature of graphene production on LMCats would lead to a more efficient and cost-effective process. Here, we investigated the effects of alloying copper with a low-melting temperature metal on graphene growth in real-time. We examined a set of liquid copper-gallium alloy systems using two complementary in situ techniques: radiation-mode optical microscopy and synchrotron X-ray reflectivity (XRR). Microscopy observations revealed reduced catalytic activity and graphene quality degradation in compositions with gallium domination. The XRR confirmed the formation of single-layer graphene on alloys with up to 60 wt% of gallium. Additionally, we detected a systematic increase in adsorption height on the alloys' surface, suggesting a weaker graphene adhesion on gallium. These findings propose a trade-off between layer quality and production cost reduction is feasible. Our results offer insights into the CVD synthesis of graphene on bimetallic liquid surfaces and underscore the potential of gallium-copper alloys for enabling the direct transfer of graphene from a liquid substrate, thereby addressing the limitations imposed by high melting temperatures of conventional LMCats.

The Mars Spectrometry 2: Gas Chromatography challenge was sponsored by NASA and run on the DrivenData competition platform in 2022. This report describes the solution which achieved the second-best score on the competition's test dataset. The solution utilized two-dimensional, image-like representations of the competition's chromatography data samples. A number of different Convolutional Neural Network models were trained and ensembled for the final submission.

RED-100 is a two-phase Xe detector designed and built for the study of coherent elastic neutrino-nucleus scattering CEvNS of reactor antineutrinos. A comprehensive calibration was performed in order to obtain important parameters of the detector during its exposition at the Kalinin Nuclear Power Plant (Tver, Russia). This paper describes the analysis of calibration data, position and energy reconstruction procedures, and evaluation of the efficiency of electron extraction from the liquid xenon to the gas phase.

In this paper, we apply Clausen-Scholze's theory of solid modules to the existence of adelic decompositions for schemes of finite type over $\mathbb{Z}$. Specifically, we use the six-functor formalism for solid modules to define the skeletal filtration of a scheme, and then we show that decomposing a quasi-coherent sheaf with respect to this filtration gives rise to a new construction of the Beilinson-Parshin adelic resolution. As an application of the adelic decomposition combined with some nice completeness properties of the solid tensor product, we prove a version of adelic descent for solid quasi-coherent sheaves., Comment: 38 pages, v2: minor changes plus a new section about adelic descent, comments welcome

Datasets collecting software mentions from scholarly publications can potentially be used for research into the software that has been used in the published research, as well as into the practice of software citation. Recently, new software mention datasets with different characteristics have been published. We present an approach to assess the usability of such datasets for research on research software. Our approach includes sampling and data preparation, manual annotation for quality and mention characteristics, and annotation analysis. We applied it to two software mention datasets for evaluation based on qualitative observation. Doing this, we were able to find challenges to working with the selected datasets to do research. Main issues refer to the structure of the dataset, the quality of the extracted mentions (54% and 23% of mentions respectively are not to software), and software accessibility. While one dataset does not provide links to mentioned software at all, the other does so in a way that can impede quantitative research endeavors: (1) Links may come from different sources and each point to different software for the same mention. (2) The quality of the automatically retrieved links is generally poor (in our sample, 65.4% link the wrong software). (3) Links exist only for a small subset (in our sample, 20.5%) of mentions, which may lead to skewed or disproportionate samples. However, the greatest challenge and underlying issue in working with software mention datasets is the still suboptimal practice of software citation: Software should not be mentioned, it should be cited following the software citation principles., Comment: 17 pages, 8 figures, 8 tables. Revision of a submission to PeerJ Computer Science withdrawn due to impracticalities of examining a sufficient sample size

In this study, we investigated the self-ordering process in Langmuir films of polydisperse iron oxide nanoparticles on a water surface, employing in-situ X-ray scattering, surface pressure-area isotherm analysis, and Brewster angle microscopy. X-ray reflectometry confirmed the formation of a monolayer, while grazing incidence small-angle X-ray scattering revealed short-range lateral correlations with a characteristic length equal to the mean particle size. Remarkably, our findings indicated that at zero surface pressure, the particles organized into submicrometer clusters, merging upon compression to form a homogeneous layer. These layers were subsequently transferred to a solid substrate using the Langmuir-Schaefer technique and further characterized via scanning electron microscopy and polarized neutron reflectometry. Notably, our measurements unveiled a second characteristic length in the lateral correlations, orders of magnitude longer than the mean particle diameter, with polydisperse particles forming circular clusters densely packed in a hexagonal lattice. Furthermore, our evidence suggested that the lattice constant of this mesocrystal depended on the characteristics of the particle size distribution, specifically the mean particle size and the width of the size distribution. Additionally, we observed internal size separation within these clusters, where larger particles were positioned closer to the center of the cluster. Finally, polarized neutron reflectometry measurements provided valuable insights into the magnetization profile across the layer.

We consider the potential for a 10-kg undoped cryogenic CsI detector operating at the Spallation Neutron Source to measure coherent elastic neutrino-nucleus scattering and its sensitivity to discover new physics beyond the standard model. Through a combination of increased event rate, lower threshold, and good timing resolution, such a detector would significantly improve on past measurements. We considered tests of several beyond-the-standard-model scenarios such as neutrino non-standard interactions and accelerator-produced dark matter. This detector's performance was also studied for relevant questions in nuclear physics and neutrino astronomy, namely the weak charge distribution of CsI nuclei and detection of neutrinos from a core-collapse supernova.

The RED-100 experiment with a liquid xenon target was carried out at Kalinin Nuclear Power Plant. The goal of the experiment is the detection and study of the coherent elastic neutrino nucleus scattering process (CE$\nu$NS) for the low-energy antineutrinos in close vicinity to a reactor core. A good understanding of the external radioactive background is needed to achieve this goal. This paper describes the external background conditions for the RED-100 experiment at Kalinin Nuclear Power Plant., Comment: 16 pages, 12 figures, (minor changes in the text for clarity)