Search

Pre-chamber turbulent jet ignition represents one of the most promising techniques to improve spark ignition engines efficiency and reduce pollutant emissions. This technique consists of igniting the air-fuel mixture in the main combustion chamber by means of several hot turbulent flame jets exiting a pre-chamber. In the present study, the combustion process of a 4-stroke, gasoline SI, PFI engine equipped with a passive pre-chamber has been investigated through three-dimensional CFD (Computational Fluid Dynamics) analysis. A detailed chemistry solver with a reduced reaction mechanism was employed to investigate ignition and flame propagation phenomena. Firstly, the combustion model was validated against experimental data for the baseline engine configuration (i.e., without pre-chamber). Eventually, the validated numerical model allowed for predictive simulations of the pre-chamber-equipped engine. By varying the shape of the pre-chamber body and the size of pre-chamber orifices, different pre-chamber configurations were studied. The influence of the geometrical features on the duration of the combustion process and the pressure trends inside both the pre-chamber and main chamber was assessed and discussed. Since the use of a pre-chamber can extend the air-fuel mixture ignition limits, an additional sensitivity on the air-fuel ratio was carried out, in order to investigate engine performance at lean conditions. [ABSTRACT FROM AUTHOR]

Reactivity Controlled Compression Ignition (RCCI) is one of the most promising solutions among the low temperature combustion concepts, in terms of thermal efficiency and pollutant emissions. However, for values of brake mean effective pressure higher than 10 bar, in-cylinder peak pressure rise rates tend to be too high, limiting the specific power of any 4-Stroke (4S) engine. Such a limitation can be canceled by moving to the 2-Stroke (2S) cycle. Among many alternatives, the “Uniflow” scavenging system with exhaust poppet valves on the cylinder head allows the designer to reproduce the same identical combustion patterns of a 4-stroke RCCI engine, while increasing the indicated power output. The goal of the paper is to explore the potential of a 2-stroke RCCI engine, on the basis of a comprehensive experimental campaign carried out on a modified automotive 2.0 L, 4-stroke, four-cylinder, four-valve diesel engine. The developed prototype can run with one cylinder operating in 4-stroke RCCI mode (gasoline–diesel), while the others work in the standard diesel mode. A One Dimensional-Computational Fluid Dynamics (1D-CFD) model has been built to predict the performance of the same prototype, when operating all four cylinders in RCCI mode. In parallel, an equivalent 2-stroke RCCI virtual engine has been developed, by means of 1D-CFD simulations and empirical assumptions. A numerical comparison between the 4S and the 2S engines is finally presented, in terms of performance and emissions at full load. The study demonstrates that a 2S RCCI engine can maintain all of the advantages of the RCCI combustion, strongly reducing the penalization in terms of performance, in comparison to a standard 4S diesel engine.

Two wheel vehicles (scooters and motorcycles) make up 74% of the vehicle population in India. An experimental study has been conducted to assess and compare the particulate emissions from several two wheelers and passenger car in a typical Indian fleet. The vehicles, including four 4-stroke, two 2-stroke two-wheelers, and one gasoline-LPG bi-fuel passenger cars, were tested on a chassis dynamometer using the Indian Driving Cycle. A differential mobility spectrometer was employed to measure the particle size distribution in real-time in the range of 5 nm to 560 nm. Particulate size distributions from the two-wheelers were typically bi-modal. The count median diameter with 4-stroke two wheelers was observed in the range of 26 nm to 48 nm. The number and mass emission factors ranged between 9.5 × 10 km to 1.3 × 10 km and 0.80 mg/km to 40 mg/km; respectively. In the case of 2-stroke two wheelers, it was observed that not only the count median diameter is 3 times larger compared to 4-strokes, but also 2-stroke vehicles produce 5 times more particles in term of number and about 60 times more particles in terms of mass. The 2-stroke and 4-stroke two wheelers produced particulate emissions (both in terms of number and mass), which were higher than a gasoline and a LPG passenger vehicle operating on the same driving cycle. [ABSTRACT FROM AUTHOR]

Reactivity Controlled Compression Ignition (RCCI) is one of the most promising solutions among the low temperature combustion concepts, in terms of thermal efficiency and pollutant emissions. However, for values of brake mean effective pressure higher than 10 bar, in-cylinder peak pressure rise rates tend to be too high, limiting the specific power of any 4-Stroke (4S) engine. Such a limitation can be canceled by moving to the 2-Stroke (2S) cycle. Among many alternatives, the "Uniflow" scavenging system with exhaust poppet valves on the cylinder head allows the designer to reproduce the same identical combustion patterns of a 4-stroke RCCI engine, while increasing the indicated power output. The goal of the paper is to explore the potential of a 2-stroke RCCI engine, on the basis of a comprehensive experimental campaign carried out on a modified automotive 2.0 L, 4-stroke, four-cylinder, four-valve diesel engine. The developed prototype can run with one cylinder operating in 4-stroke RCCI mode (gasoline–diesel), while the others work in the standard diesel mode. A One Dimensional-Computational Fluid Dynamics (1D-CFD) model has been built to predict the performance of the same prototype, when operating all four cylinders in RCCI mode. In parallel, an equivalent 2-stroke RCCI virtual engine has been developed, by means of 1D-CFD simulations and empirical assumptions. A numerical comparison between the 4S and the 2S engines is finally presented, in terms of performance and emissions at full load. The study demonstrates that a 2S RCCI engine can maintain all of the advantages of the RCCI combustion, strongly reducing the penalization in terms of performance, in comparison to a standard 4S diesel engine. [ABSTRACT FROM AUTHOR]