Search

An increasingly relevant functional measurement is a liquid biopsy to assist in the diagnosis of cancers. The existing approach for liquid biopsy is to utilize microfluidic chips for the isolation of circulating tumor cells (CTCs) or exosomes or extracellular vesicles (EV) from patient samples, and then for the analysis of the cargo contained inside the CTCs, exosomes or EVs. However, such an analysis does not provide a real-time liquid biopsy, since there is a long delay between the time of sample collection and the results from the analysis. Microfluidic chip-formats also provide the capability to mimic tissue functions from the analysis of small numbers of cells cultured in the chip. Analysis of the secreted molecules from such cells could provide a measurement of the secretome, which could be analogous to a liquid biopsy. A 3D structural organization of cells in microfluidic chips is usually in the form of organoids or spheroids. The analysis of organoids or spheroids is well-adapted for immunohistochemistry or ELISA-type identification of surface markers, but not for real-time analysis of secreted molecules since the fluid and molecules in the interior volume of the organoid or spheroid is not accessible in real-time. We have recently proposed an alternative novel design for a microfluidic chip format comprising 3D micro-niches that provide a real-time analysis of secretions produced directly from small numbers of cells. The microfluidic chip with 3D micro-niches then analyses the secretions from these monolayers in real-time (“secretome”). The microfluidic chip includes electronic biosensors that provide real-time measurement of secreted molecules. This short review concludes with a proposition for the means to utilize this novel microfluidic chip to function as a real-time and quantifiable diagnostic screening device to differentiate cancerous cells from healthy cells.

Cellular protrusions generated by the actin cytoskeleton are central to the process of building the body of the embryo. Problems with cellular protrusions underlie human diseases and syndromes, including implantation defects and pregnancy loss, congenital birth defects, and cancer. Cells use protrusive activity together with actin-myosin contractility to create an ordered body shape of the embryo. Here, I review how actin-rich protrusions are used by two major morphological cell types, epithelial and mesenchymal cells, during collective cell migration to sculpt the mouse embryo body. Pre-gastrulation epithelial collective migration of the anterior visceral endoderm is essential for establishing the anterior-posterior body axis. Gastrulation mesenchymal collective migration of the mesoderm wings is crucial for body elongation, and somite and heart formation. Analysis of mouse mutants with disrupted cellular protrusions revealed the key role of protrusions in embryonic morphogenesis and embryo survival. Recent technical approaches have allowed examination of the mechanisms that control cell and tissue movements in vivo in the complex 3D microenvironment of living mouse embryos. Advancing our understanding of protrusion-driven morphogenesis should provide novel insights into human developmental disorders and cancer metastasis. [ABSTRACT FROM AUTHOR]

Cellular biomechanics plays critical roles in cancer metastasis and tumor progression. Existing studies on cancer cell biomechanics are mostly conducted in flat 2D conditions, where cells' behavior can differ considerably from those in 3D physiological environments. Despite great advances in developing 3D in vitro models, probing cellular elasticity in 3D conditions remains a major challenge for existing technologies. In this work, we utilize optical Brillouin microscopy to longitudinally acquire mechanical images of growing cancerous spheroids over the period of eight days. The dense mechanical mapping from Brillouin microscopy enables us to extract spatially resolved and temporally evolving mechanical features that were previously inaccessible. Using an established machine learning algorithm, we demonstrate that incorporating these extracted mechanical features significantly improves the classification accuracy of cancer cells, from 74% to 95%. Building on this finding, we have developed a deep learning pipeline capable of accurately differentiating cancerous spheroids from normal ones solely using Brillouin images, suggesting the mechanical features of cancer cells could potentially serve as a new biomarker in cancer classification and detection., Competing Interests: Conflict of Interest The authors declare no conflict of interest.

In vivo, melanocytes occupy three-dimensional (3D) space. Nevertheless, most experiments involving melanocytes are performed in a two-dimensional microenvironment, resulting in difficulty obtaining accurate results. Therefore, it is necessary to construct an artificial in vivo–like 3D microenvironment. Here, as a step towards engineering a precisely defined acellular 3D microenvironment supporting the maintenance of human epidermal melanocytes (HEMs), we examined the types of integrin heterodimers that are expressed transcriptionally, translationally, and functionally in HEMs. Real-time PCR and fluorescent immunoassay analyses were used to elucidate the expression of integrin α and β subunit genes at the transcriptional and translational levels, respectively. The functionality of the presumed integrin heterodimers was confirmed using attachment and antibody-inhibition assays. Among the genes encoding 12 integrin subunits (α1, α2, α3, α4, α5, α6, α7, αV, β1, β3, β5, and β8) showing significantly higher transcription levels, proteins translated from the integrin α2, α4, α5, β1, β3, and β5 subunit genes were detected on the surface of HEMs. These HEMs showed significantly increased adhesion to collagen I, fibronectin, laminin, and vitronectin, and functional blockade of the integrin α2 subunits significantly inhibited adhesion to collagen I, fibronectin, and laminin. In addition, there was no significant inhibition of the adhesion to fibronectin or vitronectin in HEMs with functional blockade of the integrin α4, α5, or αV subunits. These results indicate that the active integrin α2β1 heterodimer and the inactive integrin α4, α5, αV, β3, and β5 subunits are all localized on the surface of HEMs. [ABSTRACT FROM AUTHOR]

The realization of biomimetic microenvironments for cell biology applications such as organ-on-chip, in vitro drug screening, and tissue engineering is one of the most fascinating research areas in the field of bioengineering. The continuous evolution of additive manufacturing techniques provides the tools to engineer these architectures at different scales. Moreover, it is now possible to tailor their biomechanical and topological properties while taking inspiration from the characteristics of the extracellular matrix, the three-dimensional scaffold in which cells proliferate, migrate, and differentiate. In such context, there is therefore a continuous quest for synthetic and nature-derived composite materials that must hold biocompatible, biodegradable, bioactive features and also be compatible with the envisioned fabrication strategy. The structure of the current review is intended to provide to both micro-engineers and cell biologists a comparative overview of the characteristics, advantages, and drawbacks of the major 3D printing techniques, the most promising biomaterials candidates, and the trade-offs that must be considered in order to replicate the properties of natural microenvironments. [ABSTRACT FROM AUTHOR]

The extracellular matrix (ECM) is a dynamic and intricate three-dimensional (3D) microenvironment with excellent biophysical, biomechanical, and biochemical properties that may directly or indirectly regulate cell behavior, including proliferation, adhesion, migration, and differentiation. Compared with tissue-derived ECM, cell-derived ECM potentially has more advantages, including less potential for pathogen transfer, fewer inflammatory or anti-host immune responses, and a closer resemblance to the native ECM microenvironment. Different types of cell-derived ECM, such as adipose stem cells, synovium-derived stem cells and bone marrow stromal cells, their effects on articular chondrocytes which have been researched. In this study, we aimed to develop a 3D cell culture substrate using decellularized ECM derived from human umbilical cord-derived mesenchymal stem cells (hUCMSCs), and evaluated the effects on articular chondrocytes. We evaluated the morphology and components of hUCMSC-derived ECM using physical and chemical methods. Morphological, histological, immunohistochemical, biochemical, and real-time PCR analyses demonstrated that proliferation and differentiation capacity of chondrocytes using the 3D hUCMSC-derived ECM culture substrate was superior to that using non-coated two-dimensional plastic culture plates. In conclusion, 3D decellularized ECM derived from hUCMSCs offers a tissue-specific microenvironment for in vitro culture of chondrocytes, which not only markedly promoted chondrocyte proliferation but also preserved the differentiation capacity of chondrocytes. Therefore, our findings suggest that a 3D cell-derived ECM microenvironment represents a promising prospect for autologous chondrocyte-based cartilage tissue engineering and regeneration. The hUCMSC-derived ECM as a biomaterial is used for the preparation of scaffold or hybrid scaffold products which need to further study in the future. [ABSTRACT FROM AUTHOR]

We developed a (three-dimensional) 3D scaffold, we named HY-FIB, incorporating a force-transmission band of braided hyaluronate embedded in a cell localizing fibrin hydrogel and poly-lactic-co-glycolic acid (PLGA) nanocarriers as transient components for growth factor controlled delivery. The tenogenic supporting capacity of HY-FIB on human-Bone Marrow Mesenchymal Stem Cells (hBM-MSCs) was explored under static conditions and under bioreactor-induced cyclic strain conditions. HY-FIB elasticity enabled to deliver a mean shear stress of 0.09 Pa for 4 h/day. Tendon and cytokine marker expression by hBM-MSCs were studied. Results: hBM-MSCs embedded in HY-FIB and subjected to mechanical stimulation, resulted in a typical tenogenic phenotype, as indicated by type 1 Collagen fiber immunofluorescence. RT-qPCR showed an increase of type 1 Collagen, scleraxis, and decorin gene expression (3-fold, 1600-fold, and 3-fold, respectively, at day 11) in dynamic conditions. Cells also showed pro-inflammatory (IL-6, TNF, IL-12A, IL-1β) and anti-inflammatory (IL-10, TGF-β1) cytokine gene expressions, with a significant increase of anti-inflammatory cytokines in dynamic conditions (IL-10 and TGF-β1 300-fold and 4-fold, respectively, at day 11). Mechanical signaling, conveyed by HY-FIB to hBM-MSCs, promoted tenogenic gene markers expression and a pro-repair cytokine balance. The results provide strong evidence in support of the HY-FIB system and its interaction with cells and its potential for use as a predictive in vitro model.

Many steps are required to generate bone through endochondral ossification with adipose mesenchymal stromal cells (ASC), from cell isolation to in vitro monolayer expansion, seeding into scaffolds, cartilaginous differentiation and in vivo remodeling. Moreover, monolayer expansion and passaging of ASC strongly decreases their differentiation potential. Here, we propose that adipose tissue itself can be used as scaffold for ASC expansion and endochondral ossification. Human liposuctions were fractionated and cultured for 3 weeks with proliferative medium in suspension. The resulting constructs, named Adiscaf, were compared to constructs generated with a previously developed, control approach, i.e. collagen sponges seeded with monolayer-expanded ASC. After 4 weeks of chondrogenic differentiation, Adiscaf contained cartilage tissue, characterized by glycosaminoglycans and collagen type II. After 2 additional weeks of hypertrophic differentiation, Adiscaf showed upregulation of hypertrophic markers at the gene expression and protein levels. After 8 weeks of in vivo implantation, Adiscaf resulted in ectopic bone tissue formation, including bone marrow elements. Adiscaf showed superior in vitro differentiation and in vivo performance as compared to the control paradigm involving isolation and monolayer expansion of ASC. This new paradigm exploits the physiological niche of adipose tissue and strongly suggests a higher functionality of cells inside adipose tissue after in vitro expansion. This study demonstrates that adult human adipose tissue used as a native construct can generate a bone organ by endochondral ossification. The concept could be exploited for the generation of osteogenic grafts for bone repair. Statement of Significance In this study we used adult human adipose tissue as scaffolding materials (called Adiscaf) to generate a bone organ by endochondral ossification. Adiscaf concept is based on the culture of adipose tissue cells inside their native microenvironment for the generation of osteogenic grafts for bone repair. This simplified approach overcomes several limitations linked to the current techniques in bone tissue engineering, such as isolation of cells and inadequate properties of the biomaterials used as scaffolds. In addition, the present paradigm proposes to exploit physiological niches in order to better maintain the functionality of cells during their in vitro expansion. This project not only has a scientific impact by evaluating the impact of native physiological niches on the functionality and chondrogenic differentiation of mesenchymal progenitors but also a clinical impact to generate osteogenic grafts and/or osteoinductive materials for bone regeneration and repair. [ABSTRACT FROM AUTHOR]

Breast cancer is the most common ailment among women. In 2020, it had the highest incidence of any type of cancer. Many Phase II and III anti-cancer drugs fail due to efficacy, durability, and side effects. Thus, accelerated drug screening models must be accurate. In-vivo models have been used for a long time, but delays, inconsistent results, and a greater sense of responsibility among scientists toward wildlife have led to the search for in-vitro alternatives. Stromal components support breast cancer growth and survival. Multi-compartment Transwell models may be handy instruments. Co-culturing breast cancer cells with endothelium and fibroblasts improves modelling. The extracellular matrix (ECM) supports native 3D hydrogels in natural and polymeric forms. 3D Transwell cultured tumor spheroids mimicked in-vivo pathological conditions. Tumor invasion, migration, Trans-endothelial migration, angiogenesis, and spread are studied using comprehensive models. Transwell models can create a cancer niche and conduct high-throughput drug screening, promising future applications. Our comprehensive shows how 3D in-vitro multi compartmental models may be useful in producing breast cancer stroma in Transwell culture. The process of developing a new drug takes years of research and investment. Many potential drugs do not see the end of the pipeline due to loss in translation. The main in-vitro and in-vivo studies used to screen drugs can be classified as shown in the figure. The in-vitro components can be made viable for various applications with Transwell systems, thus avoiding the use of animal models. [Display omitted] • Here, we have tried to delve into the underlying molecular limitations of various in vivo breast cancer models. • We've tried to bring to light the still-unresolved involvement of stromal component in cancer cell migration. • We have discussed the impact of transwell culture on cancer cell via several different mechanisms. • We compared the benefits and drawbacks of a variety of hydrogels, both natural and polymeric, that can serve as ECM in a 3D model with multiple cell types. • High throughput screening can facilitate the quick testing of a library of candidate novel drugs was provided. [ABSTRACT FROM AUTHOR]

Homeostasis of hematopoietic stem and progenitor cells (HSPC) is controlled by a combination of biochemical and biophysical environmental cues in the bone marrow (BM) niche, where a tight balance of quiescence and proliferation of HSPC is maintained. Specifically, alongside soluble factors and extracellular matrix (ECM) proteins, spatial confinement and ECM stiffness have been recognized to be critical for regulation of HSPC fate. Here we employ a modular, glycosaminoglycan (GAG)-based biohybrid hydrogel system to balance proliferation of human HSPC and maintenance of quiescent hematopoietic stem cells (HSC) through simultaneous regulation of exogenous biochemical and biophysical cues. Our results demonstrate that HSPC respond to increased spatial confinement with lowered proliferation and cell cycling, which results in higher frequency of quiescent LTC-IC (long-term culture initiating cells), while GAG-rich 3D environments further support maintenance of the cells. [ABSTRACT FROM AUTHOR]

The self-organization of embryonic stem cells (ESCs) into organized tissues with three distinct germ layers is critical to morphogenesis and early development. While the regulation of this self-organization by soluble signals is well established, the involvement of mechanical force gradients in this process remains unclear due to the lack of a suitable platform to study this process. In this study, we developed a 3D microenvironment to examine the influence of mechanical tension gradients on ESC-patterned differentiation during morphogenesis by controlling the geometrical signals (shape and size) of ESC colonies. We found that changes in colony geometry impacted the germ layer pattern, with Cdx2-positive cells being more abundant at edges and in areas with high curvatures. The differentiation patterns were determined by geometry-mediated cell tension gradients, with an extraembryonic mesoderm-like layer forming in high-tension regions and ectodermal-like lineages at low-tension regions in the center. Suppression of cytoskeletal tension hindered ESC self-organization. These results indicate that geometric confinement-mediated mechanical tension plays a crucial role in linking multicellular organization to cell differentiation and impacting tissue patterning.

Biological tissues and biomaterials are often defined by unique spatial gradients in physical properties that impart specialized function over hierarchical scales. The structure of these materials forms continuous transitional gradients and discrete local microenvironments between adjacent (or within) tissues, and across matrix-cell boundaries, which is difficult to replicate with common scaffold systems. Here, the matrix densification of collagen leading to gradients in density, mechanical properties, and fibril morphology is studied. High-density regions form via a fluid pore pressure and flow-driven mechanism, with increased relative fibril density (10×), mechanical properties (20×, to 94.40 ± 18.74 kPa), and maximum fibril thickness (1.9×, to >1 μm) compared to low-density regions, while maintaining porosity and fluid/mass transport to support viability of encapsulated cells. Similar to the organization of the articular cartilage zonal structure, it is found that high-density collagen regions induce cell and nuclear alignment of primary chondrocytes. Chondrocyte gene expression is maintained in collagen matrices, and no phenotypic changes are observed as a result of densification. Collagen densification provides a tunable platform for the creation of gradient systems to study complex cell-matrix interactions. These methods are easily generalized to compression and boundary condition modalities useful to mimic a broad range of tissues. [ABSTRACT FROM AUTHOR]

Our study was aimed to select the best growth factor cocktail for differentiation of mesenchymal stem cells (MSCs) into hepatocytes-like cells (HLCs) in absence and presence of three dimensional (3D) microenvironment. Ninety milliliters of bone marrow was aspirated from the iliac bone for separation of MSCs. This study was conducted on 20 patients with advanced liver cirrhosis. They were divided into two groups. Group I; MSCs were plated onto 96-well plates without microenvironment (control group). Group II; MSCs were plated onto 96-well plates with 3D microenvironment. Surface expression of CD271, CD29, and CD34 were analyzed using flow cytometry. MSCs were differentiated in vitro into HLCs by adding four growth factor cocktails in presence and absence of 3D microenvironment. Hepatogenesis was assessed by immunohistochemical analysis of OV6, α-fetoprotein, albumin, and cytokeratin 18 expressions. There was statistically significant increase in the expression of CD271 and CD29 after MSCs culture ( P < 0.001). Heterogeneous cell population composed of MSCs and differentiated HLCs were encountered (40 % hepatocytes and 60 % MSCs). Furthermore, our results showed that growth factor cocktails 1 and 2 gave the best result for differentiation of MSCs into HLCs. MSCs could be feasible, readily available, and novel source for differentiation of MSCs into HLCs for future therapeutic implication. [ABSTRACT FROM AUTHOR]

The neural crest (NC) is composed of highly multipotent precursor cells able to differentiate into both neural and mesenchymal phenotypes. Until now, most studies focusing on NC cell differentiation have been performed with traditional two-dimensional (2D) cell culture systems. However, such culture systems do not reflect the complex three-dimensional (3D) microenvironments of in vivo NC cells. To address this limitation, we have developed a method of Matrigel™ coating to create 2D and 3D microenvironments in the same culture well. When we performed cultures of trunk neural crest cells (TNCCs) on three different lots of basement membrane matrix (Matrigel™), we observed that all analyzed Matrigel™ lots were equally efficient in allowing the appearance of glial cells, neurons, melanocytes, smooth muscle cells and chondrocytes. We further observed that chondrocytes were found predominantly in the 3D microenvironment, whereas smooth muscle cells were almost exclusively located in the 2D microenvironment. Glial cells were present in both environments, but with broader quantities on the 2D surface. Melanocytes and neurons were equally distributed in both 2D and 3D microenvironments, but with distinct morphologies. It is worth noting the higher frequency of chondrocytes detected in this study using the 3D Matrigel™ microenvironment compared to previous reports of chondrogenesis obtained from TNCCs on traditional 2D cultures. In conclusion, Matrigel™ represents an attractive scaffold to study NC multipotentiality and differentiation, since it permits the appearance of the major NC phenotypes. [ABSTRACT FROM AUTHOR]

The fates of pluripotent stem cells (PSCs), including survival, self-renewal, and differentiation, are regulated by chemical and mechanical cues presented in the three-dimensional (3D) microenvironment. Most PSC studies have been performed on 2D substrates. However, 3D culture systems have demonstrated the importance of intercellular interactions in regulating PSC self-renewal and differentiation. Microwell culture systems have been developed to generate homogenous PSC colonies of defined sizes and shapes and to study how colony morphology affects cell fate. Using microwells, researchers have demonstrated that PSCs remain in a self-renewing undifferentiated state as a result of autocrine and paracrine signaling. Other studies have shown that microwell regulation of embryoid body size affects lineage commitment during differentiation via cell-cell contact and expression of soluble signals. In this review, we discuss recent advances in the design and utilization of 3D microwell platforms for studying intercellular regulation of PSC cell fate decisions and the underlying molecular mechanisms. [ABSTRACT FROM AUTHOR]

The use of dermal substitutes is increasingly widespread but the outcomes of substitute-assisted healing remain functionally deficient. Presently, the most successful scaffolds are acellular polymer matrices, prepared through lyophilization and phase separation techniques, designed to mimic the dermal extracellular matrix. The application of scaffolds containing viable cells has proven to be problematic due to short shelf-life, high cost and death of transplanted cells as a result of immune rejection and apoptosis. Recent advances in biomaterial science have made new techniques available capable of increasing scaffold complexity, allowing the creation of 3D microenvironments that actively control cell behaviour. Importantly, it may be possible through these sophisticated novel techniques, including bio-printing and electrospinning, to accurately direct stem cell behaviour. This complex proposal involves the incorporation of cell-matrix, cell-cell, mechanical cues and soluble factors delivered in a spatially and temporally pertinent manner. This requires accurate modelling of three-dimensional stem cell interactions within niche environments to identify key signalling molecules and mechanisms. The application of stem cells within substitutes containing such environments may result in greatly improved transplanted cell viability. Ultimately this may increase cellular organization and complexity of skin substitutes. This review discusses progress made in improving the efficacy of cellular dermal substitutes for the treatment of cutaneous defects and the potential of evolving new technology to improve current results. [ABSTRACT FROM AUTHOR]

In tissue engineering, scaffolds with multiscale functionality, especially with the ability to release locally multiple or specific bioactive molecules to targeted cell types, are highly desired in regulating appropriate cell phenotypes. In this study, poly (epsilon-caprolactone) (PCL) solutions (8% w/v) containing different amounts of bovine serum albumin (BSA) with or without collagen were electrospun into nanofibres. As verified by protein release assay and fluorescent labelling, BSA and collagen were successfully incorporated into electrospun nanofibres. The biological activity of functionalised fibres was proven in the cell culture experiments using human dermal fibroblasts. By controlling the sequential deposition and fibre alignment, 3D scaffolds with spatial distribution of collagen or BSA were assembled using fluorescently labelled nanofibres. Human dermal fibroblasts showed preferential adhesion to PCL nanofibres containing collagen than PCL alone. Taken together, multiscale scaffolds with diverse functionality and tunable distribution of biomolecules across the nanofibrous scaffold can be fabricated using electrospun nanofibres. [ABSTRACT FROM AUTHOR]

Abstract: Three-dimensional cultures in a microfabricated environment provide in vivo-like conditions for cells, and have been used in a variety of applications in basic and clinical studies. In this study, the contractility of cardiomyocytes in a 3D environment using complex 3D hybrid biopolymer microcantilevers was quantified and compared with that observed in a 2D environment. By measuring the deflections of the microcantilevers with different surfaces and carrying out finite element modeling (FEM) of the focal pressures of the microcantilevers, it was found that the contractile force of high-density cardiomyocytes on 3D grooved surfaces was 65–85% higher than that of cardiomyocytes on flat surfaces. These results were supported by immunostaining, which showed alignment of the cytoskeleton and elongation of the nuclei, as well as by quantitative RT-PCR, which revealed that cells on the grooved surface had experienced sustained stimuli and tighter cell-to-cell interactions. [Copyright &y& Elsevier]

Cells of the stromal vascular fraction (SVF) of human adipose tissue have the capacity to generate osteogenic grafts with intrinsic vasculogenic properties. However, cultured adipose-derived stromal cells (ASCs), even after minimal monolayer expansion, lose osteogenic capacity in vivo. Communication between endothelial and stromal/mesenchymal cell lineages has been suggested to improve bone formation and vascularization by engineered tissues. Here, we investigated the specific role of a subpopulation of SVF cells positive for T-cadherin (T-cad), a putative endothelial marker. We found that maintenance during monolayer expansion of a T-cad-positive cell population, composed of endothelial lineage cells (ECs), is mandatory to preserve the osteogenic capacity of SVF cells in vivo and strongly supports their vasculogenic properties. Depletion of T-cad-positive cells from the SVF totally impaired bone formation in vivo and strongly reduced vascularization by SVF cells in association with decreased VEGF and Adiponectin expression. The osteogenic potential of T-cad-depleted SVF cells was fully rescued by co-culture with ECs from a human umbilical vein (HUVECs), constitutively expressing T-cad. Ectopic expression of T-cad in ASCs stimulated mineralization in vitro but failed to rescue osteogenic potential in vivo, indicating that the endothelial nature of the T-cad-positive cells is the key factor for induction of osteogenesis in engineered grafts based on SVF cells. This study demonstrates that crosstalk between stromal and T-cad expressing endothelial cells within adipose tissue critically regulates osteogenesis, with VEGF and adiponectin as associated molecular mediators., (© The Author(s) 2022. Published by Oxford University Press.)

Metastasis is the leading cause of mortality in cancer patients. To migrate to distant sites, cancer cells would need to adapt their behaviour in response to different tissue environments. Thus, it is essential to study this process in models that can closely replicate the tumour microenvironment. Here, we evaluate the use of organotypic liver and brain slices to study cancer metastasis. Morphological and viability parameters of the slices were monitored daily over 3 days in culture to assess their stability as a realistic 3D tissue platform for in vitro metastatic assays. Using these slices, we evaluated the invasion of MDA-MB-231 breast cancer cells and of a subpopulation that was selected for increased motility. We show that the more aggressive invasion of the selected cells likely resulted not only from their lower stiffness, but also from their lower adhesion to the surrounding tissue. Different invasion patterns in the brain and liver slices were observed for both subpopulations. Cells migrated faster in the brain slices (with an amoeboid-like mode) compared to in the liver slices (where they migrated with mesenchymal or collective migration-like modes). Inhibition of the Ras/MAPK/ERK pathway increased cell stiffness and adhesion forces, which resulted in reduced invasiveness. These results illustrate the potential for organotypic tissue slices to more closely mimic in vivo conditions during cancer cell metastasis than most in vitro models. • Liver and brain slices can be stable, realistic in vitro 3D models. • Cell stiffness and adhesion to the tissue play determinant roles in cellular invasion in 3D. • MEK inhibitors can lead to increased cell stiffness and adhesion forces, and consequently reduced cancer cell invasion. • MDA-MB-231 breast cancer cells migrate faster and deeper into brain tissue compared to liver tissue. [ABSTRACT FROM AUTHOR]

We describe a cellular contractile mechanism employed by fibroblasts and mesenchymal cancer cells to migrate in 3D collagen gels. During 3D spreading, fibroblasts strongly deform the matrix. They protrude, polarize, and initiate migration in the direction of highest extracellular matrix (ECM) deformation (prestrain). This prestrain is maintained through anterior cellular contractions behind the leading edge prior to protrusion, coordinating a distinct 3D migration cycle that varies between cell types. Myosin IIA is required for strain polarization, generating anterior contractions, and maintaining prestrain for efficient directional cell migration. Local matrix severing disrupts the matrix prestrain, suppressing directional protrusion. We show that epithelial cancer and endothelial cells rarely demonstrate the sustained prestrain or anterior contractions. We propose that mesenchymal cells sense ECM stiffness in 3D and generate their own matrix prestrain. This requires myosin IIA to generate polarized periodic anterior contractions for maintaining a 3D migration cycle. [Display omitted] • A matrix prestrain propels fibroblasts and cancer cells through 3D environments • Anterior contractions sustain the matrix prestrain through enhanced cell protrusion • Both require high myosin II contractility and substantial integrin ligation • The unbalanced front ECM prestrain is highly cell type dependent Doyle et al. show that, in 3D environments, highly migratory mesenchymal cells use anterior contractions localized between the leading edge and nucleusto generate a large extracellular matrix deformation (prestrain) and enhance protrusion. Myosin II contractility and extensive integrin ligation mediate this migration phenotype. [ABSTRACT FROM AUTHOR]

We developed a (three-dimensional) 3D scaffold, we named HY-FIB, incorporating a force-transmission band of braided hyaluronate embedded in a cell localizing fibrin hydrogel and poly-lactic-co-glycolic acid (PLGA) nanocarriers as transient components for growth factor controlled delivery. The tenogenic supporting capacity of HY-FIB on human-Bone Marrow Mesenchymal Stem Cells (hBM-MSCs) was explored under static conditions and under bioreactor-induced cyclic strain conditions. HY-FIB elasticity enabled to deliver a mean shear stress of 0.09 Pa for 4 h/day. Tendon and cytokine marker expression by hBM-MSCs were studied. Results: hBM-MSCs embedded in HY-FIB and subjected to mechanical stimulation, resulted in a typical tenogenic phenotype, as indicated by type 1 Collagen fiber immunofluorescence. RT-qPCR showed an increase of type 1 Collagen, scleraxis, and decorin gene expression (3-fold, 1600-fold, and 3-fold, respectively, at day 11) in dynamic conditions. Cells also showed pro-inflammatory (IL-6, TNF, IL-12A, IL-1β) and anti-inflammatory (IL-10, TGF-β1) cytokine gene expressions, with a significant increase of anti-inflammatory cytokines in dynamic conditions (IL-10 and TGF-β1 300-fold and 4-fold, respectively, at day 11). Mechanical signaling, conveyed by HY-FIB to hBM-MSCs, promoted tenogenic gene markers expression and a pro-repair cytokine balance. The results provide strong evidence in support of the HY-FIB system and its interaction with cells and its potential for use as a predictive in vitro model. [ABSTRACT FROM AUTHOR]

The poor healing capacity of tendons is known to worsen in the elderly. During tendon aging and degeneration, endogenous human tendon stem/progenitor cells (hTSPCs) experience profound pathological changes. Here, we explored a rejuvenation strategy for hTSPCs derived from aged/degenerated Achilles tendons (A-TSPCs) by providing three-dimensional (3D) nanofiber hydrogels and comparing them to young/healthy TSPCs (Y-TSPCs). RADA peptide hydrogel has a self-assembling ability, forms a nanofibrous 3D niche and can be further functionalized by adding RGD motifs. Cell survival, apoptosis, and proliferation assays demonstrated that RADA and RADA/RGD hydrogels support A-TSPCs in a comparable manner to Y-TSPCs. Moreover, they rejuvenated A-TSPCs to a phenotype similar to that of Y-TSPCs, as evidenced by restored cell morphology and cytoskeletal architecture. Transmission electron, confocal laser scanning and atomic force microscopies demonstrated comparable ultrastructure, surface roughness and elastic modulus of A- and Y-TSPC-loaded hydrogels. Lastly, quantitative PCR revealed similar expression profiles, as well a significant upregulation of genes related to tenogenesis and multipotency. Taken together, the RADA-based hydrogels exert a rejuvenating effect by recapitulating in vitro specific features of the natural microenvironment of human TSPCs, which strongly indicates their potential to direct cell behaviour and overcome the challenge of cell aging and degeneration in tendon repair. [ABSTRACT FROM AUTHOR]

Cells live in a highly curved and folded 3D microenvironment within the human body. Since epithelial cells in internal organs usually adopt a tubular shape, there is a need to engineer simple in vitro devices to promote this cellular configuration. The aim of these devices would be to investigate epithelial morphogenesis and cell behavior-leading to the development of more sophisticated platforms for tissue engineering and regenerative medicine. In this chapter, we first explain the need for such epithelial tubular micropatterns based on anatomical considerations and then survey methods that can be used to study different aspects of epithelial tubulogenesis. The methods examined can broadly be divided into two classes: conventional 2D microfabrication for the formation of simple epithelial tubes in substrates of different stiffness; and 3D approaches to enable the self-assembly of organoid-derived epithelial tubes in a tubular configuration. These methods demonstrate that modeling tubulogenesis in vitro with high resolution, accuracy, and reproducibility is possible.

Despite the recent rigorous studies towards a possible cure, cancer still remains as one of the most daunting problems faced by the humanity. Currently utilized two-dimensional cancer models are known to have various insuperable limitations such as insufficient biomimicry of the heterogeneous conditions of tumors and their three-dimensional structures. Discrepancies between the laboratory models and the actual tumor environment significantly impair a thorough comprehension of the carcinogenesis process and development of successful remedies against cancer. Modeling tumor microenvironments through bioprinting poses strong potential to minimize the effects of the aforementioned issues thanks to its freeform nature, adaptability, customizability, scalability and diversity. Numerous research studies involving three-dimensional modeling of various cancer types using bioprinting technologies have been reported, recently. In this review, we provide a broad summary of these studies to help better represent their potential and analyze their contribution to cancer research., Competing Interests: 5.Conflict of Interest The authors declare no conflict of interest. Declaration of interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Chemotaxis plays a pivotal role in crucial biological phenomena including immune response, cancer metastasis, and wound healing. Although many chemotaxis assays have been developed to better understand these multicomplex biological mechanisms, most of them have serious limitations mainly due to the poor representation of native three-dimensional (3D) microenvironment. Here, we describe a method to develop and validate a novel 3D in vitro chemotaxis model to study the migration of corneal fibroblasts through a stromal equivalent. A hydrogel was used that contained gelatin microspheres loaded with platelet-derived growth factor-BB (PDGF-BB) in the inner section and corneal fibroblasts in the outer section. The cell migration toward the chemical stimuli over time can be monitored via confocal microscopy. The development of this in vitro model can be used for both qualitative and quantitative examinations of chemotaxis.

Because cell interactions play a fundamental role for cell differentiation, we investigated the expression of Pannexin 1 and Pannexin 3 in human bone marrow mesenchymal stromal cells (HBMSCs) in a three-dimensional (3D) microenvironment provided by a polysaccharide-based macroporous scaffold. The pannexin (Panx) family consists of three members, Panx1, Panx2, and Panx3. The roles of Panx large-pore ion and metabolite channels are recognized in many physiological and pathophysiological scenarios, but the role of these proteins in human physiological processes is still under investigation. Our study demonstrates that HBMSCs cultured within 3D scaffolds have induced Panx1 and Panx3 expression, compared with two-dimensional culture and that the Panx3 gene expression profile correlates with those of bone markers on mesenchymal stromal cells culture into the 3D scaffold. We showed that Panx1 is involved in the HBMSCs 3D cell-cell organization, as acting on the size of cellular aggregates, demonstrated by the use of Probenecid and the mimetic peptide 10panx1 as specific inhibitors. Inhibition of Panx3 using siRNA strategy shows to reduce the expression of osteocalcin as osteoblast-specific marker by HBMSCs cultured in 3D conditions, suggesting a role of this Panx in osteogenesis. Moreover, we evaluated Panx1 and Panx3 expression within the cellularized scaffolds upon subcutaneous implantation in NOG (NOD/Shi-scid/IL-2Rγ null ) mice, where we could observe a more intense expression in the constructs than in the surrounding tissues in vivo. This study provides new insights on the expression of pannexins in HBMSCs on a 3D microenvironment during the osteogenic differentiation, in vitro and in vivo., (Copyright © 2017 John Wiley & Sons, Ltd.)

Biomaterials often have characteristic spatial gradients in physical properties that lead to specialized function. On page 2617, C. P. Neu and co‐workers form gradient matrices of natural biopolymers using a densification process that exudes fluid from the structure, leading to a reproducible reorganization of collagen and embedded cells. High‐density regions show increased fibril packing, mechanical properties, and fibril thickness, on par with values observed in native tissues like articular cartilage. [ABSTRACT FROM AUTHOR]

Decellularized cartilage microparticles, and all associated native signals, are delivered to hMSC populations in a dense, type I collagen matrix. Hybrid usage of native tissue signals and the engineering control of collagen matrices show the ability to induce local infiltration and differentiation of hMSCs. Additionally, the solid cartilage microparticles inhibit bulk cell-mediated contraction of the composite.

A microfabricated pillar substrate is developed to confine, align, and elongate cells, allowing decoupled analysis of stiffness and directionality in 3D. Mesenchymal stem cells and cardiomyocytes are successfully confined in a 3D environment with precisely tunable stiffness anisotropy. It is discovered that anisotropically stiff micropillar substrates provide cellular confinement in 3D, aligning cells in the stiffer direction with extraordinary elongation., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A growing body of evidence has shown that extracellular matrix (ECM) stiffness can modulate stem cell adhesion, proliferation, migration, differentiation, and signaling. Stem cells can feel and respond sensitively to the mechanical microenvironment of the ECM. However, most studies have focused on classical two-dimensional (2D) or quasi-three-dimensional environments, which cannot represent the real situation in vivo. Furthermore, most of the current methods used to generate different mechanical properties invariably change the fundamental structural properties of the scaffolds (such as morphology, porosity, pore size, and pore interconnectivity). In this study, we have developed novel three-dimensional (3D) scaffolds with different degrees of stiffness but the same 3D microstructure that was maintained by using decellularized cancellous bone. Mixtures of collagen and hydroxyapatite [HA: Ca10(PO4)6(OH)2] with different proportions were coated on decellularized cancellous bone to vary the stiffness (local stiffness, 13.00 ± 5.55 kPa, 13.87 ± 1.51 kPa, and 37.7 ± 19.6 kPa; bulk stiffness, 6.74 ± 1.16 kPa, 8.82 ± 2.12 kPa, and 23.61 ± 8.06 kPa). Microcomputed tomography (μ-CT) assay proved that there was no statistically significant difference in the architecture of the scaffolds before or after coating. Cell viability, osteogenic differentiation, cell recruitment, and angiogenesis were determined to characterize the scaffolds and evaluate their biological responses in vitro and in vivo. The in vitro results indicate that the scaffolds developed in this study could sustain adhesion and growth of rat mesenchymal stem cells (MSCs) and promote their osteogenic differentiation. The in vivo results further demonstrated that these scaffolds could help to recruit MSCs from subcutaneous tissue, induce them to differentiate into osteoblasts, and provide the 3D environment for angiogenesis. These findings showed that the method we developed can build scaffolds with tunable mechanical properties almost without variation in 3D microstructure. These preparations not only can provide a cell-free scaffold with optimal matrix stiffness to enhance osteogenic differentiation, cell recruitment, and angiogenesis in bone tissue engineering but also have significant implications for studies on the effects of matrix stiffness on stem cell differentiation in 3D environments.