Search

The NLRP3 inflammasome plays a crucial role in the inflammatory response, reacting to pathogen-associated molecular patterns (PAMPs) and damage-associated molecular patterns (DAMPs). This response is essential for combating infections and restoring tissue homeostasis. However, chronic activation can lead to detrimental effects, particularly in neuropsychiatric and neurodegenerative diseases. Our study seeks to provide a method to effectively measure the NLRP3 inflammasome's activation within cerebral organoids (COs), providing insights into the underlying pathophysiology of these conditions and enabling future studies to investigate the development of targeted therapies. [ABSTRACT FROM AUTHOR]

We developed the open-source bIUreactor research platform for studying 3D structured tissues. The versatile and modular platform allows a researcher to generate 3D tissues, culture them with oxygenated perfusion, and provide cyclic loading, all in their own lab (in laboratorium) for an all in cost of $8,000 including 3D printer, printing resin, and electronics. We achieved this by applying a design philosophy that leverages 3D printing, open-source software and hardware, and practical techniques to produce the following: 1. perfusible 3D tissues, 2. a bioreactor chamber for tissue culture, 3. a module for applying cyclic compression, 4. a peristaltic pump for providing oxygenated perfusion to 3D tissues, 5. motor control units, and 6. open-source code for running the control units. By making it widely available for researchers to investigate 3D tissue models and easy for them to use, we intend for the bIUreactor to democratize 3D tissue research, therefore increasing the pace and scale of biomedical research discoveries using 3D tissue models. [ABSTRACT FROM AUTHOR]

Shape-controlled 3D tissues resemble natural living tissues in human and animal bodies and are essential materials for developing and improving technologies in regenerative medicine, drug discovery, and biological robotics. In previous studies, shape-controlled 3D tissues were fabricated using scaffold structures or 3D bioprinting techniques. However, controlling the shape of 3D tissues without leaving non-natural materials inside the 3D tissue and efficiently fabricating them remains challenging. In this paper, we propose a novel method for fabricating shape-controlled 3D tissues free of non-natural materials using a flexible high-porosity porous structure (HPPS). The HPPS consisted of a micromesh with pore sizes of 14.87 ± 1.83 μm, lattice widths of 2.24 ± 0.10 μm, thicknesses of 9.96 ± 0.92 μm, porosity of 69.06 ± 3.30%, and an I-shaped microchamber of depth 555.26 ± 11.17 μm. U-87 human glioma cells were cultured in an I-shaped HPPS microchamber for 48 h. After cultivation, the 3D tissue was released within a few seconds while maintaining its I-shape. Specific chemicals, such as proteolytic enzymes, were not used. Moreover, the viability of the released cells composed of shape-controlled 3D tissues free of non-natural materials was above 90%. Therefore, the proposed fabrication method is recommended for shape-controlled 3D tissues free of non-natural materials without applying significant stresses to the cells. [ABSTRACT FROM AUTHOR]

Inflammation plays a pivotal role in the development and progression of inflammatory bowel disease (IBD), by contributing to tissue damage and exacerbating the immune response. The investigation of serotonin receptor 2A (5-HT2A) ligands and transient receptor potential (TRP) channel ligands is of significant interest due to their potential to modulate key inflammatory pathways, mitigate the pathological effects of inflammation, and offer new avenues for therapeutic interventions in IBD. This study investigates the anti-inflammatory effects of 5-HT2A ligands, including psilocybin, 4-AcO-DMT, and ketanserin, in combination with TRP channel ligands, including capsaicin, curcumin, and eugenol, on the inflammatory response induced by tumor necrosis factor (TNF)-α and interferon (IFN)-γ in human 3D EpiIntestinal tissue. Enzyme-linked immunosorbent assay was used to assess the expression of pro-inflammatory markers TNF-α, IFN-γ, IL-6, IL-8, MCP-1, and GM-CSF. Our results show that psilocybin, 4-AcO-DMT, and eugenol significantly reduce TNF-α and IFN-γ levels, while capsaicin and curcumin decrease these markers to a lesser extent. Psilocybin effectively lowers IL-6 and IL-8 levels, but curcumin, capsaicin, and 4-AcO-DMT have limited effects on these markers. In addition, psilocybin can significantly decrease MCP-1 and GM-CSF levels. While ketanserin lowers IL-6 and GM-CSF levels, there are no effects seen on TNF-α, IFN-γ, IL-8, or MCP-1. Although synergistic effects between 5-HT2A and TRP channel ligands are minimal in this study, the results provide further evidence of the anti-inflammatory effects of psilocybin and eugenol. Further research is needed to understand the mechanisms of action and the feasibility of using these compounds as anti-inflammatory therapies for conditions like IBD. [ABSTRACT FROM AUTHOR]

Shape-controlled 3D tissues resemble natural living tissues in human and animal bodies and are essential materials for developing and improving technologies in regenerative medicine, drug discovery, and biological robotics. In previous studies, shape-controlled 3D tissues were fabricated using scaffold structures or 3D bioprinting techniques. However, controlling the shape of 3D tissues without leaving non-natural materials inside the 3D tissue and efficiently fabricating them remains challenging. In this paper, we propose a novel method for fabricating shape-controlled 3D tissues free of non-natural materials using a flexible high-porosity porous structure (HPPS). The HPPS consisted of a micromesh with pore sizes of 14.87 ± 1.83 μm, lattice widths of 2.24 ± 0.10 μm, thicknesses of 9.96 ± 0.92 μm, porosity of 69.06 ± 3.30%, and an I-shaped microchamber of depth 555.26 ± 11.17 μm. U-87 human glioma cells were cultured in an I-shaped HPPS microchamber for 48 h. After cultivation, the 3D tissue was released within a few seconds while maintaining its I-shape. Specific chemicals, such as proteolytic enzymes, were not used. Moreover, the viability of the released cells composed of shape-controlled 3D tissues free of non-natural materials was above 90%. Therefore, the proposed fabrication method is recommended for shape-controlled 3D tissues free of non-natural materials without applying significant stresses to the cells.

Non-clinical in vitro studies were conducted to investigate the characteristics of extracts from tobacco free nicotine pouches alongside a reference snus product and/or 1R6F reference cigarette. In vitro investigations were conducted in the Neutral Red Uptake (NRU) cytotoxicity assay, Bacterial Reverse Mutation (Ames) assay, and in vitro Mammalian Cell Micronucleus (ivMN) assay. These products were also investigated for their oral irritation potential in the EpiGingival™ 3D tissue model. Results from the Ames, in vitro Micronucleus and NRU assays indicated that the tested products were non-mutagenic, non-genotoxic and non-cytotoxic in contrast to results obtained for the 1R6F reference cigarette. Results from Complete Artificial Saliva (CAS) extracts from these products also failed to be classified as irritants (as measured using the MTT assay), in the EpiGingival™ 3D tissue model

Intestine-Liver-on-chip systems can be useful to predict oral drug administration and first-pass metabolism in vitro in order to partly replace the animal model. While organ-on-chip technology can count on sophisticated micro-physiological devices, the engineered organs still remain artificial surrogates of the native counterparts. Here, we used a bottom-up tissue engineering strategy to build-up physiologically functional 3D Human Intestine Model (3D-HIM) as well as 3D Liver-microtissues (HepG2-μTPs) in vitro and designed a microfluidic Intestine-Liver-On-Chip (InLiver-OC) to emulate first-pass mechanism occurring in vivo. Our results highlight the ethanol-induced 3D-HIM hyper-permeability and stromal injury, the intestinal prevention on the liver injury, as well as the synergic contribution of the two 3D tissue models on the release of metabolic enzymes after high amount of ethanol administration.

Organ on chip (OOC) has emerged as a major technological breakthrough and distinct model system revolutionizing biomedical research and drug discovery by recapitulating the crucial structural and functional complexity of human organs in vitro. OOC are rapidly emerging as powerful tools for oncology research. Indeed, Cancer on chip (COC) can ideally reproduce certain key aspects of the tumor microenvironment (TME), such as biochemical gradients and niche factors, dynamic cell–cell and cell–matrix interactions, and complex tissue structures composed of tumor and stromal cells. Here, we review the state of the art in COC models with a focus on the microphysiological systems that host multicellular 3D tissue engineering models and can help elucidate the complex biology of TME and cancer growth and progression. Finally, some examples of microengineered tumor models integrated with multi-organ microdevices to study disease progression in different tissues will be presented.

Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) as a new source of cardiac cells are expected to find use as tools in high-throughput screening for drug candidates and cardiotoxicity validation without the need for experimentation on animals. In recent years, it has been reported that drug screening using three-dimensional (3D) tissue is better than conventional 2D culture. Various methods have been developed for mass culture of hiPSC-CMs, and embryoid body (EB) formation is necessary in the majority of differentiation methods as this is reported to promote the differentiation of hiPSCs. However, these operations result in increased processing, cost and loss of hiPSCs. Here, we show alternative methods for differentiation to hiPSC-CMs from <100 μm hiPSC-clumps without EB formation and report on a 3D-tissue fabrication using hiPSC-CMs. The 3D cardiac tissue constructed by a layer-by-layer (LbL) cell coating technique (LbL-3D Heart) showed synchronous powerful beating. We conclude that this method enables cost-effective, reproducible and scalable hiPSC-CM production with high activity for tissue engineering, drug screening and regenerative medicine. [ABSTRACT FROM AUTHOR]

Organoids are engineered three-dimensional tissue cultures derived from stem cells and capable of self-renewal and self-organization into a variety of progenitors and differentiated cell types. An organoid resembles the cellular structure of an organ and retains some of its functionality, while still being amenable to in vitro experimental study. Compared with two-dimensional cultures, the three-dimensional structure of organoids provides a more realistic environment and structural organization of in vivo organs. Similarly, organoids are better suited to reproduce signaling pathway dynamics in vitro, due to a more realistic physiological environment. As such, organoids are a valuable tool to explore the dynamics of organogenesis and offer routes to personalized preclinical trials of cancer progression, invasion, and drug response. Complementary to experiments, mathematical and computational models are valuable instruments in the description of spatiotemporal dynamics of organoids. Simulations of mathematical models allow the study of multiscale dynamics of organoids, at both the intracellular and intercellular levels. Mathematical models also enable us to understand the underlying mechanisms responsible for phenotypic variation and the response to external stimulation in a cost- and time-effective manner. Many recent studies have developed laboratory protocols to grow organoids resembling different organs such as the intestine, brain, liver, pancreas, and mammary glands. However, the development of mathematical models specific to organoids remains comparatively underdeveloped. Here, we review the mathematical and computational approaches proposed so far to describe and predict organoid dynamics, reporting the simulation frameworks used and the models’ strengths and limitations.

Understanding the structural and functional development of human-induced pluripotent stem-cell-derived cardiomyocytes (hiPSC-CMs) is essential to engineering cardiac tissue that enables pharmaceutical testing, modeling diseases, and designing therapies. Here we use a method not commonly applied to biological materials, small angle x-ray scattering, to characterize the structural development of hiPSC-CMs within three-dimensional engineered tissues during their preliminary stages of maturation. An x-ray scattering experimental method enables the reliable characterization of the cardiomyocyte myofilament spacing with maturation time. The myofilament lattice spacing monotonically decreases as the tissue matures from its initial post-seeding state over the span of 10 days. Visualization of the spacing at a grid of positions in the tissue provides an approach to characterizing the maturation and organization of cardiomyocyte myofilaments and has the potential to help elucidate mechanisms of pathophysiology, and disease progression, thereby stimulating new biological hypotheses in stem cell engineering., (Creative Commons Attribution license.)

Three‐dimensional (3D) printers are attracting attention as a method for arranging and building cells in three dimensions. Bioprinting technology has potential in tissue engineering for the fabrication of scaffolds, cells, and tissues. However, these various printing technologies have limitations with respect to print resolution and due to the characteristics of bioink such as viscosity. We report a method for constructing of 3D tissues with a "microscopic painting device using a painting needle method" that, when used with the layer‐by‐layer (LbL) cell coating technique, replaces conventional methods. This method is a technique of attaching the high viscosity bioink to the painting needle tip and arranging it on a substrate, and can construct 3D tissues without damage to cells. Cell viability is the same before and after painting. We used this biofabrication device to construct 3D cardiac tissue (LbL‐3D Heart) using human‐induced pluripotent stem cell–derived cardiomyocytes. The constructed LbL‐3D Heart chips had multiple layers with a thickness of 60 µm, a diameter of 1.1 mm, and showed synchronous beating (50–60 beats per min). The aforementioned device and method of 3D tissue construction can be applied to various kinds of tissue models and would be a useful tool for pharmaceutical applications. [ABSTRACT FROM AUTHOR]

Organoids are engineered three-dimensional tissue cultures derived from stem cells and capable of self-renewal and self-organization into a variety of progenitors and differentiated cell types. An organoid resembles the cellular structure of an organ and retains some of its functionality, while still being amenable to in vitro experimental study. Compared with two-dimensional cultures, the three-dimensional structure of organoids provides a more realistic environment and structural organization of in vivo organs. Similarly, organoids are better suited to reproduce signaling pathway dynamics in vitro , due to a more realistic physiological environment. As such, organoids are a valuable tool to explore the dynamics of organogenesis and offer routes to personalized preclinical trials of cancer progression, invasion, and drug response. Complementary to experiments, mathematical and computational models are valuable instruments in the description of spatiotemporal dynamics of organoids. Simulations of mathematical models allow the study of multiscale dynamics of organoids, at both the intracellular and intercellular levels. Mathematical models also enable us to understand the underlying mechanisms responsible for phenotypic variation and the response to external stimulation in a cost- and time-effective manner. Many recent studies have developed laboratory protocols to grow organoids resembling different organs such as the intestine, brain, liver, pancreas, and mammary glands. However, the development of mathematical models specific to organoids remains comparatively underdeveloped. Here, we review the mathematical and computational approaches proposed so far to describe and predict organoid dynamics, reporting the simulation frameworks used and the models' strengths and limitations. [ABSTRACT FROM AUTHOR]

Abstract A challenge in developing effective treatments is the modeling of the human disease using in vitro and in vivo systems. Animal models have played a critical role in the understanding of disease pathophysiology, target validation, and evaluation of novel therapeutic agents. However, as the success rate from entry into clinical testing to drug approval remains low, it is critical to have high quality and well-validated models reflective of the disease condition. Additional experimental models are being developed based on functional in vitro 3D tissue models such as organoids and 3D bioprinted tissues. Because these 3D tissue models mimic closer the architecture, cell composition and physiology of native tissues, they are now being used as screening platforms in drug discovery and development and for tissue transplant in regenerative medicine. Here we review the current state-of-art of in vitro and in vivo translational models for the development of therapies for rare diseases of the liver. Highlights • Targeting early steps of liver disease progression can lead to more successful therapeutic interventions. • Validated animal models reflective of human liver disease phenotypes increase predictability of drug toxicity and efficacy. • 3D liver tissue models are being developed as in vitro platforms for drug development and regenerative medicine. [ABSTRACT FROM AUTHOR]

A hybrid cell sheet engineering approach was developed using ultra-thin nanofiber arrays to host the formation of composite nanofiber/cell sheets. It was found that confluent aligned cell sheets could grow on uniaxially-aligned and crisscrossed nanofiber arrays with extremely low fiber densities. The porosity of the nanofiber sheets was sufficient to allow aligned linear myotube formation from differentiated myoblasts on both sides of the nanofiber sheets, in spite of single-side cell seeding. The nanofiber content of the composite cell sheets is minimized to reduce the hindrance to cell migration, cell-cell contacts, mass transport, as well as the foreign body response or inflammatory response associated with the biomaterial. Even at extremely low densities, the nanofiber component significantly enhanced the stability and mechanical properties of the composite cell sheets. In addition, the aligned nanofiber arrays imparted excellent handling properties to the composite cell sheets, which allowed easy processing into more complex, thick 3D structures of higher hierarchy. Aligned nanofiber array-based composite cell sheet engineering combines several advantages of material-free cell sheet engineering and polymer scaffold-based cell sheet engineering; and it represents a new direction in aligned cell sheet engineering for a multitude of tissue engineering applications.

Although many efforts have been made to engineer cell sheets with anisotropic patterns, current techniques still exhibit several shortcomings including uncontrolled harvest time and deformation of pattern by contraction. In this study, we report a simple method to harvest a cell sheet with a striated structure of extracellular matrix (ECM) and myoblasts using a thermosensitive hydrogel micropatterned with different sizes (25 and 80 μm). The hydrogel supported the formation of a confluent monolayer of myoblasts with aligned morphology. When the temperature was reduced from 37 to 4 oC, the size of the hydrogel increased by approximately 1.2-fold within 10 min. In response to this change, a cell sheet was harvested and could be transferred to the desirable substrate through conformal contact between the hydrogel and target. We further examined the effect of pattern size on alignment of ECM/cell assembly by fast Fourier transform (FFT) analysis of fluorescently stained stress fibers and ECM proteins within the harvested cell sheet. The cell sheet maintained alignment of confluent myoblasts after being harvested to the substrate. In addition, the topologic patterns also promoted formation of aligned myotube on the harvested cell sheet, which was important for muscle tissue regeneration. However, the pattern size appeared to have no influence on alignment of cells on the cell sheet. Finally, a bi-layered structure was fabricated in which each layer was stacked with aligned direction on the cell sheet being perpendicularly assembled. Collectively, our platform could be used for rapid harvest of cell sheets with aligned architecture of ECM/cell, which can be applied to fabrication of welldefined 3D tissue for tissue engineering. [ABSTRACT FROM AUTHOR]

The ability to accurately detect cardiotoxicity has become increasingly important in the development of new drugs. Since the advent of human pluripotent stem cell-derived cardiomyocytes, researchers have explored their use in creating an in vitro drug screening platform. Recently, there has been increasing interest in creating 3D microphysiological models of the heart as a tool to detect cardiotoxic compounds. By recapitulating the complex microenvironment that exists in the native heart, cardiac microphysiological systems have the potential to provide a more accurate pharmacological response compared to current standards in preclinical drug screening. This review aims to provide an overview on the progress made in creating advanced models of the human heart, including the significance and contributions of the various cellular and extracellular components to cardiac function. [ABSTRACT FROM AUTHOR]

* Objective: To compare a superabsorbent polymer dressing (DryMax Extra; DME), an antibacterial absorbent polymer dressing (Sorbact absorption dressing; SB) and an antibacterial superabsorbent polymer dressing (Sorbion Sachet S; SSS) activity against Pseudomonas aeruginosa biofilms. * Method: A 3D acellular synthetic soft tissue (ASST) allowing biofilm formation, was prepared and inoculated with Pseudomonas aeruginosa, before the application of dressings. The dressings DME, with and without a silver net, and two benchmark dressings SB and SSS were tested. After 24 hours' incubation, qualitative assessment by visual screening of the soft tissue and bacterial burden assessment in the dressings and acellular soft tissue model were performed. * Results: DME combined with a silver net gave a distinct and wide colourless zone of inhibition while partial zones of inhibition were seen for DME, SSS and SB. Compared with the tissues exposed to the other dressings, those exposed to SB and the bacterial control appeared green and opaque. In descending order, the most visual growth was seen in bacterial control, followed by SB, SSS, and DME. The bacterial load was equivalent for all dressings without an antimicrobial substance in both ASST (around log 10) and dressing (around log II). The bacterial load for DME combined with a silver net, in comparison to DME alone was significantly reduced, with log 3.6 in dressings and log 4.2 in ASST. * Conclusion: The removal of bacteria by DME was equivalent to SB and SSS. Furthermore, DME limited the production of the green colour, indicative of Pyocyanin. If extrapolated to a wound, the ability of DME to absorb Pseudomonas aeruginosa and limit Pyocyanin levels in the wound might lead to reduced virulence. * Declaration of interest: This study was supported by AbsorbestAB, Kisa, Sweden [ABSTRACT FROM AUTHOR]

Future lunar missions and beyond will require new and innovative approaches to radiation countermeasures. The Translational Research Institute for Space Health (TRISH) is focused on identifying and supporting unique approaches to reduce risks to human health and performance on future missions beyond low Earth orbit. This paper will describe three funded and complementary avenues for reducing the risk to humans from radiation exposure experienced in deep space. The first focus is on identifying new therapeutic targets to reduce the damaging effects of radiation by focusing on high throughput genetic screens in accessible, sometimes called lower, organism models. The second focus is to design innovative approaches for countermeasure development with special attention to nucleotide-based methodologies that may constitute a more agile way to design therapeutics. The final focus is to develop new and innovative ways to test radiation countermeasures in a human model system. While animal studies continue to be beneficial in the study of space radiation, they can have imperfect translation to humans. The use of three-dimensional (3D) complex in vitro models is a promising approach to aid the development of new countermeasures and personalized assessments of radiation risks. These three distinct and unique approaches complement traditional space radiation efforts and should provide future space explorers with more options to safeguard their short and long-term health., Competing Interests: Declaration of Competing Interest None., (Copyright © 2022. Published by Elsevier B.V.)

Abstract: A hormone-responsive 3D human tissue-like culture system was developed in which human primary mammary epithelial cells (MECs) were co-cultured with two types of predominant mammary stromal cells on silk protein scaffolds. Silk porous scaffolds with incorporated extracellular matrix provided a compatible environment for epithelial structure morphogenesis and differentiation. The presence of stromal cells promoted MEC proliferation, induced both alveolar and ductal morphogenesis and enhanced casein expression. In contrast, only alveolar structures were observed in monocultures. The alveolar structures generated from the heterotypic cultures in vitro exhibited proper polarity similar to human breast tissue in vivo. Consistent with their phenotypic appearance, more functional differentiation of epithelial cells was also observed in the heterotypic cultures, where casein-α and -β mRNA expression were increased significantly. Additionally, this 3D multicellular culture model displayed an estrogen-responsive physiologically relevant response, evidenced by enhanced cell proliferation, aberrant morphology, changes in gene expression profile and few polarized lumen structures after estrogen treatment. This culture system offers an excellent opportunity to explore the role of cell–cell and cell–substrate interactions during mammary gland development, the consequences of hormone receptor activation on MEC behavior and morphogenesis, as well as their alteration during neoplastic transformation in human breast tissue. [Copyright &y& Elsevier]

Organ on chip (OOC) has emerged as a major technological breakthrough and distinct model system revolutionizing biomedical research and drug discovery by recapitulating the crucial structural and functional complexity of human organs in vitro. OOC are rapidly emerging as powerful tools for oncology research. Indeed, Cancer on chip (COC) can ideally reproduce certain key aspects of the tumor microenvironment (TME), such as biochemical gradients and niche factors, dynamic cell–cell and cell–matrix interactions, and complex tissue structures composed of tumor and stromal cells. Here, we review the state of the art in COC models with a focus on the microphysiological systems that host multicellular 3D tissue engineering models and can help elucidate the complex biology of TME and cancer growth and progression. Finally, some examples of microengineered tumor models integrated with multi-organ microdevices to study disease progression in different tissues will be presented. [ABSTRACT FROM AUTHOR]

Non-clinical in vitro studies were conducted to investigate the characteristics of extracts from tobacco free nicotine pouches alongside a reference snus product and/or 1R6F reference cigarette. In vitro investigations were conducted in the Neutral Red Uptake (NRU) cytotoxicity assay, Bacterial Reverse Mutation (Ames) assay, and in vitro Mammalian Cell Micronucleus ( iv MN) assay. These products were also investigated for their oral irritation potential in the EpiGingival™ 3D tissue model. Results from the Ames, in vitro Micronucleus and NRU assays indicated that the tested products were non-mutagenic, non-genotoxic and non-cytotoxic in contrast to results obtained for the 1R6F reference cigarette. Results from Complete Artificial Saliva (CAS) extracts from these products also failed to be classified as irritants (as measured using the MTT assay), in the EpiGingival™ 3D tissue model., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: JT International SA funded the project, and all authors were employees of Japan Tobacco Group at the time of the study. Nordic spirit tobacco-free nicotine pouches are manufactured and supplied by JT International., (© 2022 The Authors.)

Rationale: The tumor microenvironment (TME) determines tumor progression and affects clinical therapy. Its basic components include cancer-associated fibroblasts (CAFs) and tumor-associated endothelial cells (TECs), both of which constitute the tumor matrix and microvascular network. The ability to simulate interactions between cells and extracellular matrix in a TME in vitro can assist the elucidation of cancer growth and evaluate the efficiency of therapies. Methods: In the present study, an in vitro 3D model of tumor tissue that mimicked in vivo cell physiological function was developed using tumor-associated stromal cells. Colorectal cancer cells, CAFs, and TECs were co-cultured on 3D-printed scaffolds so as to constitute an extracellular matrix (ECM) that allowed cell processes such as adhesion, stemness, proliferation, and vascularization to take place. Normal stromal cells were activated and reprogrammed into tumor-related stromal cells to construct a TME of tumor tissues. Results: The activated stromal cells overexpressed a variety of tumor-related markers and remodeled the ECM. Furthermore, the metabolic signals and malignant transformation of the in vitro 3D tumor tissue was substantially similar to that observed in tumors in vivo . Conclusions: The 3D tumor tissue exhibited physiological activity with high drug resistance. The model is suitable for research studies of tumor biology and the development of personalized treatments for cancer., Competing Interests: Competing Interests: The authors have declared that no competing interest exists., (© The author(s).)

Intestine-Liver-on-chip systems can be useful to predict oral drug administration and first-pass metabolism in vitro in order to partly replace the animal model. While organ-on-chip technology can count on sophisticated micro-physiological devices, the engineered organs still remain artificial surrogates of the native counterparts. Here, we used a bottom-up tissue engineering strategy to build-up physiologically functional 3D Human Intestine Model (3D-HIM) as well as 3D Liver-microtissues (HepG2-μTPs) in vitro and designed a microfluidic Intestine-Liver-On-Chip (InLiver-OC) to emulate first-pass mechanism occurring in vivo . Our results highlight the ethanol-induced 3D-HIM hyper-permeability and stromal injury, the intestinal prevention on the liver injury, as well as the synergic contribution of the two 3D tissue models on the release of metabolic enzymes after high amount of ethanol administration., (Copyright © 2020 De Gregorio, Telesco, Corrado, Rosiello, Urciuolo, Netti and Imparato.)

The vascularization of three-dimensional (3D) tissue constructs is necessary for transporting nutrients and oxygen to the component cells. In this study, a vacuum forming method was applied to emboss a vascular pattern on an electrospun membrane so that guided vascular structures could develop within the construct. Two- or six-layer constructs of electrospun membranes seeded with endothelial cells and pericytes were stacked and subcutaneously implanted into mice. Blood vessel formation in the implanted constructs with six alternating layers of flat membranes and membranes embossed with a blood vessel pattern was observed after two weeks of implantation. The formation of blood vessels was observed along the embossed blood vessel pattern in the structure of the embossed membrane laminated at four weeks and eight weeks. Vascular endothelial growth factor (VEGF) and angiopoietin 1 (Ang-1) were highly expressed in the vascularized structures. Therefore, we demonstrated that a structure capable of producing a desired blood vessel shape with electrospun membranes embossed with a blood vessel pattern can be manufactured, and that a variety of structures can be manufactured using electrospun membranes in the tissue engineering era. [ABSTRACT FROM AUTHOR]

Modular tissue engineering creates a three-dimensional (3D) macroscale tissue construct from modular microscale units for complex 3D tissue reconstruction. In particular, a hydrogel sheet that is one of the module types allows easy and controllable assembly of 3D microenvironments as compared to other module types such as a microcapsule and a microfiber. However, it is difficult to manipulate a hydrogel sheet made of extracellular matrix (ECM) proteins. Thus, in this study, we propose a fabrication technique for the manipulation of thin collagen sheet containing cells with a paper support. A donut-shaped paper support was combined with the micropatterned collagen sheet by permeation of cell-collagen mixture passing through a micropatterned mold into the paper. We established a sterile method for the paper support to maintain high cell viability and intrinsic cell morphology and demonstrated an endothelial module having 3D tubular networks. The endothelial module also showed that control of the pattern length resulted in a change in the tubular size and network density within a sheet. The geometrically controlled collagen sheet modules are expected to be used for improved implantation and biologically relevant drug testing.

The hanging-drop network (HDN) is a technology platform based on a completely open microfluidic network at the bottom of an inverted, surface-patterned substrate. The platform is predominantly used for the formation, culturing, and interaction of self-assembled spherical microtissues (spheroids) under precisely controlled flow conditions. Here, we describe design, fabrication, and operation of microfluidic hanging-drop networks.

Cell sheet stratification technology has been used for reconstituting highly functional three-dimensional (3D) hepatic tissues in vitro. Triple-layered hepatic tissues with a hepatocyte-specific polarity were fabricated by sandwiching a hepatocyte sheet (Hep sheet) between two endothelial cell (EC) sheets. The morphological and functional characteristics of the triple-layered hepatic construct (EC-Hep-EC) were evaluated and compared with those of a double-layered hepatic construct with a single EC sheet (Hep-EC) and a Hep sheet only. Transmission electron microscope (TEM) observations revealed that the extracellular matrix was observed to be deposited in the space between the ECs and hepatocytes on both the upper and lower sides of the hepatocytes in the EC-Hep-EC construct. Immunohistochemistry with basolateral (CD147) and apical [multidrug resistance-associated protein (MRP2)] membrane polarity markers clearly showed the recovery of in vivo-like hepatocyte polarization in the EC-Hep-EC group. In addition, hepatocyte-specific functions, including albumin secretion, ammonia removal and the induction of cytochrome P450, were also highly preserved. The presented technology for stratifying multiple cell sheets was simple in operation and successfully reproduced both the heterotypic/homotypic cell-cell and cell-matrix interactions with the inherent hepatocyte configurations, thus closely mimicking the in vivo environment. The triple-layered 3D hepatic constructs could therefore be valuable as a new experiment tool for drug-screening tests, an implantable tissue model for cell-based therapies and an efficient culture platform for bioartificial liver devices. Copyright © 2015 John Wiley & Sons, Ltd., (Copyright © 2015 John Wiley & Sons, Ltd.)

In the field of tissue engineering, fabrication of millimeter- or centimeter-sized three-dimensional (3D) human tissues with controlled 3D cell density, 3D cell components, and 3D cell locations has been a goal of researchers. In this study, we fabricated collagen nanofiber layers of varying thicknesses on cell surfaces by previously reported collagen-coating techniques and then constructed millimeter-sized 3D human tissues, controlling the 3D cell-cell distance. In these 3D tissues, cells in the constructed 3D tissues kept a constant cell-cell distance after 24 h of incubation. Thickness of the obtained 3D tissues was controlled successfully by altering the number of cells seeded and coating times. The maximum thickness was over 2 mm when coating was carried out three times. Cell-cell distance was also controllable from approximately 15-30 μm. When cells coated once and twice with collagen nanofibers were used for the continuous construction of 3D tissues, millimeter-sized 3D tissues with areas of different cell density were obtained. The interfaces between higher and lower cell density areas were slightly mixed, but more than 80% viability was maintained after 4 days of incubation. The results suggested that stable millimeter-sized 3D tissues can be achieved using collagen nanofiber-coated cells. In addition, 3D tissues constructed by collagen-coated iPS-CM and human cardiac fibroblast were also successful.

A hybrid cell sheet engineering approach was developed using ultra-thin nanofiber arrays to host the formation of composite nanofiber/cell sheets. It was found that confluent aligned cell sheets could grow on uniaxially-aligned and crisscrossed nanofiber arrays with extremely low fiber densities. The porosity of the nanofiber sheets was sufficient to allow aligned linear myotube formation from differentiated myoblasts on both sides of the nanofiber sheets, in spite of single-side cell seeding. The nanofiber content of the composite cell sheets is minimized to reduce the hindrance to cell migration, cell-cell contacts, mass transport, as well as the foreign body response or inflammatory response associated with the biomaterial. Even at extremely low densities, the nanofiber component significantly enhanced the stability and mechanical properties of the composite cell sheets. In addition, the aligned nanofiber arrays imparted excellent handling properties to the composite cell sheets, which allowed easy processing into more complex, thick 3D structures of higher hierarchy. Aligned nanofiber array-based composite cell sheet engineering combines several advantages of material-free cell sheet engineering and polymer scaffold-based cell sheet engineering; and it represents a new direction in aligned cell sheet engineering for a multitude of tissue engineering applications.