Search

For decades, detectives and forensic scientists have relied on friction ridge skin comparisons to identify individuals in criminal investigations. This method involves examining (latent) fingermarks, typically captured as two‐dimensional (2D) images, and comparing them with known inked impressions or scans. The comparisons focus on general patterns, the location and orientation of minutiae, and additional characteristics like scars or pores. However, this common process overlooks other potentially valuable factors, such as handedness, biological sex, and the time since deposition, which could provide crucial investigative leads, especially in cases with partial or unclear ridge patterns. This study explored the potential of three‐dimensional (3D) optical profilometry (OP) to observe changes in fingermarks ridge height and volume over 7 days while considering hand dominance and biological sex. The results indicated that all the assessed 3D metrics were generally consistent in detecting the effects of sex and handedness, mostly noticeable on aged fingermarks. Specifically, females and impressions from their non‐dominant hand exhibited higher values. Additionally, the influence of time was evident, with fresh fingermarks showing significantly larger ridges in terms of height and volume. These findings suggest that 3D OP can enhance the probative value of fingermarks by inferring additional characteristics such as sex, handedness, and the age of the impression. These activity‐level propositions could provide useful information in cases where only partial or poor‐quality fingermarks are recovered, providing new data dimensions that could lead to more comprehensive forensic examinations. [ABSTRACT FROM AUTHOR]

Background: Cancer initiation has long been "unknowable" in biology and medicine. In 1987, however, Moore and our research group observed single hepatocytes and minifoci that were strongly positive for glutathione S‐transferase P‐form (GST‐P) in the rat liver as early as 2 to 3 days after initiation by diethylnitrosamine prior to the induction of GST‐P+ foci and nodules. The induction of GST‐P+ single hepatocytes, precursors of GST‐P+ foci and nodules, was considered genetic. But, the details of the induction mechanism have remained unclear despite various examinations over a long period. Methods: Male Sprague‐Dawley rats (aged 6 weeks) were fed a basal diet containing either benzyl isothiocyanate (BITC, 0.5% by wt) or 2‐acetylaminofluorene (AAF, 0.04%) adlibitum for appropriate time intervals. All animals were anesthetized and euthanized. The livers obtained were excised, cut into 3‐ to 4‐mm‐thick slices and fixed in cold acetone at 4 °C. The liver specimens were then sliced into 25‐µm‐thick sections in PBS using an automated microtome (Vibratome 1500 Sectioning System, Vibratome Products, NY, USA). Immunocytochemical staining was performed in free solution, and the results were examined via digital light microscopy (Coolscope, Nikon, Tokyo). Results: 3D analysis using a vibratome showed that GST‐P is rapidly excreted into the bile of the liver of animals in response to strong carcinogenic stress caused by promoters or initiators. "Rapid biliary excretion of GST‐P" was widely and commonly observed in all hepatocytes, GST‐P+ single hepatocytes, minifoci, foci and nodules under appropriate conditions. Surprisingly, on the basis of these key findings, a new mechanism of cancer initiation involving the transformation of hepatocytes into GST‐P+ single hepatocytes and minifoci in animal livers was identified. In addition, the initiation process was determined to be nongenetic because mutation is an invisible rare event. Conclusions: This short review describes several details about breakthrough findings on cancer initiation in rat livers, the application of 3D analysis to other cancers and the importance in the genetic analysis in malignant diseases. [ABSTRACT FROM AUTHOR]

Foot and ankle alignment plays a pivotal role in human gait and posture. Traditional assessment methods, relying on 2D standing radiographs, present limitations in capturing the dynamic 3D nature of foot alignment during weight-bearing and are prone to observer error. This study aims to integrate weight-bearing CT (WBCT) imaging and advanced deep learning (DL) techniques to automate and enhance quantification of the 3D foot and ankle alignment. Thirty-two patients who underwent a WBCT of the foot and ankle were retrospectively included. After training and validation of a 3D nnU-Net model on 45 cases to automate the segmentation into bony models, 35 clinically relevant 3D measurements were automatically computed using a custom-made tool. Automated measurements were assessed for accuracy against manual measurements, while the latter were analyzed for inter-observer reliability. DL-segmentation results showed a mean dice coefficient of 0.95 and mean Hausdorff distance of 1.41 mm. A good to excellent reliability and mean prediction error of under 2 degrees was found for all angles except the talonavicular coverage angle and distal metatarsal articular angle. In summary, this study introduces a fully automated framework for quantifying foot and ankle alignment, showcasing reliability comparable to current clinical practice measurements. This operator-friendly and time-efficient tool holds promise for implementation in clinical settings, benefiting both radiologists and surgeons. Future studies are encouraged to assess the tool's impact on streamlining image assessment workflows in a clinical environment. • Traditionally, plain weightbearing radiographs are used to quantify our foot and ankle. • These 2D radiographs are impeded by bony superposition and errors in patient positioning. • Technical advances have introduced 3D weightbearing CT imaging to overcome these shortcomings. • At present weightbearing CT creates a large image stack, which is time consuming to process. • A fully automated 3D alignment tool with a high reliability and short processing time is presented. [ABSTRACT FROM AUTHOR]

Abstract Peyer’s patches (PPs), which contain an abundance of B and T cells, play a key role in inducing pivotal immune responses in the intestinal tract. PPs are defined as aggregated lymph follicles, which consist of multiple lymph follicles (LFs) that may interact with each other in a synergistic manner. LFs are thought to be spherical in shape; however, the characteristics of their structure are not fully understood. To elucidate changes in the structure of PPs as individuals grow, we generated serial 2D sections from entire PPs harvested from mice at 2, 4, and 10 weeks of age and performed a 3D analysis using a software, Amira. Although the number of LFs in PPs was not changed throughout the experiment, the volume and surface area of LFs increased significantly, indicating that LFs in PPs develop continuously by recruiting immune cells, even after weaning. In response to the dramatic changes in the intestinal environment after weaning, the development of germinal centers (GCs) in LFs was observed at 4 and 10 weeks (but not 2 weeks) of age. In addition, GCs gradually began to form away from the center of LFs and close to the muscle layer where export lymphatic vessels develop. Importantly, each LF was joined to the adjacent LF; this feature was observed even in preweaning nonactivated PPs. These results suggest that PPs may have a unique organization and structure that enhance immune functions, allowing cells in LFs to have free access to adjacent LFs and egress smoothly from PPs to the periphery upon stimulation after weaning.

Remote sensing technologies and GIS have become every-day practice in military historical reconstruction. Our research employed laser scanning survey in conjunction with historical data to execute a detailed reconstruction of a common part of the Hungarian Southern Defence System. The system’s remaining objects are well documented and in good condition. However, the previous maps only provide approximate positions and fire directions. Currently, the objects are covered by extremely dense vegetation, making surveying particularly difficult. To overcome these challenges, both airborne and terrestrial laser scanning data collected and integrated. The 3D reconstruction of the defensive line had two major objectives. Firstly, to compare the reconstructed objects and their original plans based on 3D CAD models derived from in-field data. Secondly, to improve the historical military tactical maps, including object positions and orientations by the integration of 3D models into the digital terrain model from airborne scanning data. Finaly, the dimensions and the condition of the objects were analysed, and the defensive structure appearing on historical tactical maps was improved based on the surveyed data. The described methodology has the potential to reconstruct the entire fortified line, which could have archaeological, educational, architectural and tourism applications.

Background: Studies report that Lisfranc injury is more common than thought. Several imaging methods for assessing the stability of Lisfranc injury have been described but many are impossible to standardize and not accurate enough. Purpose: To present a three-dimensional (3D) method for analyzing the changes in the joint space width of the midfoot joint and the joints of the medial part of the Lisfranc complex in healthy individuals. Material and Methods: Non-weightbearing and weightbearing cone-beam computed tomography (CBCT) images of 11 healthy feet were acquired and analyzed with 3D software. The mean range of joint space width changes of each joint was computed from the changes in individual image pairs. Results: 3D analysis software was used to analyze the medial part of the Lisfranc complex. In this sample of healthy feet, the changes in the joint spaces in the medial part of Lisfranc complex, calculated with 3D analysis software, was less than 0.6 mm. The distance between bones increased or decreased, depending on which part of the joint surface the measurements were taken. Conclusion: In this study, we present a 3D analysis method to evaluate midfoot joint space width changes. Our analysis revealed that in healthy feet there are only minimal changes in the joint space width between weightbearing and non-weightbearing indicating minimal movement of the midtarsal joints. The 3D analysis of weightbearing CBCT data provides a promising tool for analyzing the small midfoot joints in a variety of conditions. [ABSTRACT FROM AUTHOR]

Laser shock peening (LSP) is a technique similar to shot peening that improves the mechanical properties, such as fatigue performance of metallic structures, by introducing compressive residual stresses. This study aims to present a 3D finite element simulation for simulating residual stress field after laser shock peening without absorbent coating (LSPwC) in real applications. Also, the residual stress distribution induced by LSPwC in a Rene 80 Ni-based superalloy was obtained via X-ray diffraction and hole drilling measurements. The excellent correlation between the simulated residual stress values and experimental test results proved this model reliable. Laser peening Rene-80 superalloy samples with single LSP impact at a laser power density of 6 GW/cm2 led to a significant increase in the compressive residual stress (-405 MPa) compared to the unpeened sample. The yield strength of laser-peened samples was improved by ~ 16% and a reduction of ~ 12% in the failure strain compared to the baseline sample. Similarly, the laser peening increased microhardness by 26% compared to the untreated samples. Scanning electron microscopy (SEM) was also utilized to interpret the failure mechanism of samples examined before and after LSP. [ABSTRACT FROM AUTHOR]

Although dental patterns are unique, the use of bitemark analysis in personal identification remains controversial. To accurately reproduce and compare three-dimensional models of bitemarks and dental arches, intraoral three-dimensional scans, commonly utilized in clinical dental practice for precise and stable digital impressions, are recommended. This study aims to compare two different techniques for bitemark analysis: a digital method based on the superimposition of digital scans of dental patterns and lesions, and a visual method based on the physical superimposition of impressions and resin casts produced by 3D printing. A sample of 12 volunteers (6 males and 6 females) with a mean age of 26 years was collected as biters. Each subject was asked to bite on custom supports made from semi-rigid water bottles covered with imprintable dental wax. The dental arches and bitemarks were then recorded using an intraoral scanner and dental impressions. Scan superimposition analysis was conducted using CloudCompare software, while resin casts were printed using a 3D printer and physically superimposed on the bitemark impressions by a blind operator, who was not involved in sample collection, bite test execution, prior cast acquisition, or CloudCompare analysis. Both superimposition techniques relied on the selection of 10 corresponding landmarks (on canines and central and lateral incisors of the upper and lower arches) between the dental arches and impressions. The digital superimposition showed an average concordance of 92.5% for the upper arch landmarks and 85% for the lower arch landmarks, with an overall average concordance of 88.8% for both arches combined. In contrast, the visual analysis of resin casts showed an average concordance of 77.5% for the upper arch and 76.7% for the lower arch, with an overall average of 77.1% for both arches combined. In the analysis performed using CloudCompare, the maxillary arch demonstrated the best superimposition, with 4 landmarks (R0, R1, R2, R5) consistently overlapping. The digital analysis outperformed the visual analysis in all four quadrants, particularly in the upper right arch compared to the lower left arch, thereby supporting the integration of digital techniques in forensic applications. Further studies are necessary to validate the digital technique on a larger sample, including subjects with different dental characteristics, bite dynamics, and varying types of supports and substrates. [ABSTRACT FROM AUTHOR]

Natural extracts, such as those from the residues of the Olea europaea industry, offer an opportunity for use due to their richness in antioxidant compounds. These compounds can be incorporated into porous polymeric devices with huge potential for tissue engineering such as bone, cardiovascular, osteogenesis, or neural applications using supercritical CO2. For this purpose, polymeric scaffolds of biodegradable poly(lactic-co-glycolic acid) (PLGA) and chitosan, generated in situ by foaming, were employed for the supercritical impregnation of ethanolic olive leaf extract (OLE). The influence of the presence of chitosan on porosity and interconnectivity in the scaffolds, both with and without impregnated extract, was studied. The scaffolds have been characterized by X-ray computed microtomography, scanning electron microscope, measurements of impregnated load, and antioxidant capacity. The expansion factor decreased as the chitosan content rose, which also occurred when OLE was used. Pore diameters varied, reducing from 0.19 mm in pure PLGA to 0.11 mm in the two experiments with the highest chitosan levels. The connectivity was analyzed, showing that in most instances, adding chitosan doubled the average number of connections, increasing it by a factor of 2.5. An experiment was also conducted to investigate the influence of key factors in the impregnation of the extract, such as pressure (10–30 MPa), temperature (308–328 K), and polymer ratio (1:1–9:1 PLGA/chitosan). Increased pressure facilitated increased OLE loading. The scaffolds were evaluated for antioxidant activity and demonstrated substantial oxidation inhibition (up to 82.5% under optimal conditions) and remarkable potential to combat oxidative stress-induced pathologies. [ABSTRACT FROM AUTHOR]

Over the preceding five decades, there has been a noticeable surge in the pursuit of achieving voluminous and well-defined lips. This trend has prompted an escalating number of individuals to undergo lip augmentation procedures, aiming for a natural three-dimensional enhancement of lip volume and distinct vermilion borders. Despite the proliferation of lip augmentation techniques, there remains a dearth of comprehensive investigations into their precise effects on the three-dimensional structural integrity of the lips. This research endeavors to address this gap by employing stereophotogrammetry as a quantitative tool to scrutinize lip augmentation outcomes and to appraise the efficacy of lip plumpers. The study methodology involves a comparative analysis of lip dimensions among subjects treated with a commercial lip plumper using multi-spectral imaging for lip dimension assessment, coupled with markerless tracking technology and 3D interpolating surface methodology to analyze lip volume and shape. Additionally, the study evaluated lip youth state, including moisture level, softness, firmness, and tissue density. The demand for lip augmentation procedures is driven by perceived advantages such as quick recovery and minimal risk. Therefore, it is crucial to substantiate their efficacy with robust findings. The investigation suggests that both 3D and 2D stereophotogrammetry techniques are reliable for evaluating lip size before and after augmentation, whether through cosmetic or aesthetic approaches. Overall, the study provides a comprehensive analysis of a lip treatment aimed at enhancing volume and redesigning lip lines. It demonstrates that stereophotogrammetry is effective for assessing 3D lip dimensions and their correlation with internal lip structure. This research could be particularly valuable for evaluating the efficacy and duration of various lip enhancement techniques, including dermal fillers, implants, and topical cosmetic formulations, offering quantitative and reproducible assessments over time. [ABSTRACT FROM AUTHOR]

Abstract Background Cancer initiation has long been “unknowable” in biology and medicine. In 1987, however, Moore and our research group observed single hepatocytes and minifoci that were strongly positive for glutathione S‐transferase P‐form (GST‐P) in the rat liver as early as 2 to 3 days after initiation by diethylnitrosamine prior to the induction of GST‐P+ foci and nodules. The induction of GST‐P+ single hepatocytes, precursors of GST‐P+ foci and nodules, was considered genetic. But, the details of the induction mechanism have remained unclear despite various examinations over a long period. Methods Male Sprague‐Dawley rats (aged 6 weeks) were fed a basal diet containing either benzyl isothiocyanate (BITC, 0.5% by wt) or 2‐acetylaminofluorene (AAF, 0.04%) ad libitum for appropriate time intervals. All animals were anesthetized and euthanized. The livers obtained were excised, cut into 3‐ to 4‐mm‐thick slices and fixed in cold acetone at 4 °C. The liver specimens were then sliced into 25‐µm‐thick sections in PBS using an automated microtome (Vibratome 1500 Sectioning System, Vibratome Products, NY, USA). Immunocytochemical staining was performed in free solution, and the results were examined via digital light microscopy (Coolscope, Nikon, Tokyo). Results 3D analysis using a vibratome showed that GST‐P is rapidly excreted into the bile of the liver of animals in response to strong carcinogenic stress caused by promoters or initiators. “Rapid biliary excretion of GST‐P” was widely and commonly observed in all hepatocytes, GST‐P+ single hepatocytes, minifoci, foci and nodules under appropriate conditions. Surprisingly, on the basis of these key findings, a new mechanism of cancer initiation involving the transformation of hepatocytes into GST‐P+ single hepatocytes and minifoci in animal livers was identified. In addition, the initiation process was determined to be nongenetic because mutation is an invisible rare event. Conclusions This short review describes several details about breakthrough findings on cancer initiation in rat livers, the application of 3D analysis to other cancers and the importance in the genetic analysis in malignant diseases.

Introduction: The management of aortic dissection has evolved significantly over the decades, with the frozen elephant trunk (FET) procedure emerging as a key technique for treating complex aortic pathologies. Recent practices involve deploying the FET prosthesis more proximally in the aorta (Zone 0) to reduce complications, leading to questions about its impact on long-term aortic remodeling compared to traditional Zone 2 deployment. Methods: This retrospective analysis utilized 3D segmentation software to assess the volumetric changes in aortic remodeling after acute Type A aortic dissections, comparing FET stent graft deployment in Zone 0 and Zone 2. The study included 27 patients operated on between 2020 and 2022, with volumetric measurements taken from postoperative and 6-month follow-up CT scans. Statistical analyses were performed to evaluate the differences in the aortic true lumen (TL) and the perfused false lumen (PFL) between the two groups. Results: Both Zone 0 and Zone 2 deployments resulted in significant true lumen (TL) increases (Z0 p = 0.001, Z2 p < 0.001) and perfused false lumen (PFL) decreases (Z0 p = 0.02, Z2 p = 0.04), with no significant differences in volumetric changes between the groups (p = 0.7 post op and p = 0.9 after 6 months). The distal anastomosis in Zone 0 did not compromise the aortic remodeling outcomes and was associated with reduced distal ischemia and cerebral perfusion times (p = 0.041). The angle measurements in Zone 0 did not show any significant changes after the 6-month control (p = 0.2). However, in Zone 2, a significant change was detected. (p = 0.022). The part comparison analyses did not indicate significant differences in aortic deviation between the groups (p = 0.62), suggesting comparable effectiveness in aortic remodeling. Conclusions: Performing the distal anastomosis more proximally in Zone 0 offers technical advantages without compromising the effectiveness of aortic remodeling compared to the traditional Zone 2 deployment. This finding supports the continued recommendation of Zone 0 deployment in the management of acute Type A aortic dissections, with ongoing studies being needed to confirm the long-term outcomes and survival benefits. [ABSTRACT FROM AUTHOR]

(1) Background: Various 3D printers are available for dental practice; however, a comprehensive accuracy evaluation method to effectively guide practitioners is lacking. This in vitro study aimed to propose an optimized method to evaluate the spatial trueness of a 3D-printed dental model made of photopolymer resin based on a special structurized dental model, and provide the preliminary evaluation results of six 3D printers. (2) Methods: A structurized dental model comprising several geometrical configurations was designed based on dental crown and arch measurement data reported in previous studies. Ninety-six feature sizes can be directly measured on this original model with minimized manual measurement errors. Six types of photo-curing 3D printers, including Objet30 Pro using the Polyjet technique, Projet 3510 HD Plus using the Multijet technique, Perfactory DDP and DLP 800d using the DLP technique, Form2 and Form3 using the SLA technique, and each printer's respective 3D-printable dental model materials, were used to fabricate one set of physical models each. Regarding the feature sizes of the simulated dental crowns and dental arches, linear measurements were recorded. The scanned digital models were compared with the design data, and 3D form errors (including overall 3D deviation; flatness, parallelism, and perpendicularity errors) were measured. (3) Results: The lowest overall 3D deviation, flatness, parallelism, and perpendicularity errors were noted for the models printed using the Objet30 Pro (overall value: 45 μm), Form3 (0.061 ± 0.019 mm), Objet30 Pro (0.138 ± 0.068°), and Projet 3510 HD Plus (0.095 ± 0.070°), respectively. In color difference maps, different deformation patterns were observed in the printed models. The feature size proved most accurate for the Objet30 Pro fabricated models (occlusal plane error: 0.02 ± 0.36%, occlusogingival direction error: −0.06 ± 0.09%). (4) Conclusions: The authors investigated a novel evaluation approach for the spatial trueness of a 3D-printed dental model made of photopolymer resin based on a structurized dental model. This method can objectively and comprehensively evaluate the spatial trueness of 3D-printed dental models and has a good repeatability and generalizability. [ABSTRACT FROM AUTHOR]

Remote sensing technologies and GIS have become everyday practice in military historical reconstruction. Our research employed laser scanning survey in conjunction with historical data to execute a detailed reconstruction of a common part of the Hungarian Southern Defence System. The system’s remaining objects are well documented and in good condition. However, the previous maps only provide approximate positions and fire directions. Currently, the objects are covered by extremely dense vegetation, making surveying particularly difficult. To overcome these challenges, both airborne and terrestrial laser scanning data collected and integrated. The 3D reconstruction of the defensive line had two major objectives. Firstly, to compare the reconstructed objects and their original plans based on 3D CAD models derived from in-field data. Secondly, to improve the historical military tactical maps, including object positions and orientations by the integration of 3D models into the digital terrain model from airborne scanning data. Finaly, the dimensions and the condition of the objects were analysed, and the defensive structure appearing on historical tactical maps was improved based on the surveyed data. The described methodology has the potential to reconstruct the entire fortified line, which could have archaeological, educational, architectural and tourism applications. [ABSTRACT FROM AUTHOR]

Climbing is a fast-growing sport, with one of the most common injuries being a rupture of the finger flexor tendon pulley. The strain on pulleys increases as finger joints flex. However, to our knowledge, no study has conducted a kinematic analysis of climbers' fingers. Thus, this study aimed to examine finger kinematics during typical climbing tasks. Eleven elite climbers performed a sequence of four climbing moves, which were recorded by an optical motion capture system. Participants used crimp, half-crimp, and open-hand grips for three trials each, with the fourth condition involving campusing using any grip except crimp. Mean proximal interphalangeal joint (PIP) flexion during the holding phase was 87° (SD 12°), 70° (14°) and 39° (27°) for the crimp, half-crimp and open-hand grip, respectively. Hence, inter-individual PIP flexion ranges overlap between different gripping conditions. Two different movement patterns emerged in the open-hand grip, possibly influenced by the use of the little finger, leading to varying degrees of flexion in the middle and ring fingers. Avoiding little finger usage in the open-hand grip may reduce load during pulley rupture rehabilitation. The implications of PIP joint angle variability on individual pulley injury risk or prevention warrant further investigation. Motion capture proved effective for understanding finger kinematics during climbing and could guide future studies on pulley injury risk factors. [ABSTRACT FROM AUTHOR]

Cases of rockfalls that occurred on a slope in the Selendi District of Manisa Province are evaluated in this article. Field studies are evaluated and different measures are examined to reduce rockfall risk. Drone flights are used to evaluate previous studies and obtain 1/1000 scale digital topographic maps. These maps are used to create a 3D (three-dimensional) solid model of the project site, and on-site surveys are conducted to identify source rock locations and free blocks that pose a risk. Those 3D analyses are used to determine the paths, jump heights, and energies of the blocks in motion. The data from the 3D maps are used to determine the most appropriate remediation methods. The structural behavior of the recommended gabion wall, which is designed at a certain height and width as a result of rockfalls, has been examined. Structural behavior is determined by simulation based on the finite element model. Within the scope of this study, the ANSYS Workbench program is used. The "Explicit Dynamics" analysis type in ANSYS Workbench was chosen to examine the rockfall effect. [ABSTRACT FROM AUTHOR]

Marine ostracods of the family Bairdiidae Sars, 1888 have an evolutionary history starting from the Ordovician with an explosive diversification of ornate forms during the Triassic. Representatives of the family are notoriously homeomorphic, which makes their taxonomy a major challenge of modern ostracodology. Their classification has thus been problematic since the 1970s. Here we present the first CT-scan investigation of recent and fossil ornate Bairdiidae valves in order to characterize and evaluate the taxonomic significance of unexploited characters, such as pores and pore canals. Thanks to 3D tomography, we explore the distribution of pores at the surface and the pathway of pore canals within the valve wall of the recent genus Triebelina van den Bold, 1946 and the Triassic genera Nodobairdia Kollmann, 1963 and Mirabairdia Kollmann, 1963. In Triebelina indopacifica van den Bold, 1946, we describe an unexpected system of double pore canals, so far unknown in ostracods. We confirm that pore systems in Triebelina have largely intramural positions. In the Triassic Bairdiidae (Nodobairdia mammilata Kollmann, 1963 and Mirabairdia pernodosa Kollmann, 1963), we recognize simple unrimmed and massively nodular pores as well as marginal pores. Lateral normal pores of the Triassic specimens appear to be mostly in intra-solum positions. Although still exploratory and at the limits of the tomographic resolution, these observations provide new evidence to reject the formerly proposed synonymy of Triassic genera with Triebelina, which obstructed the establishment of a phylogenetic classification. [ABSTRACT FROM AUTHOR]

This work develops a three-dimensional (3D) weak formulation, based on the consistent couple stress theory (CCST), for analyzing the size-dependent dynamic instability behavior of simply-supported, functionally graded (FG) cylindrical microshells that are subjected to combinations of periodic axial compression and external pressure. In our formulation, the microshells are artificially divided into nl layers. The displacement components of each individual layer are selected as the primary variables, which are expanded as a double Fourier series in the in-plane domain and are interpolated with Hermitian C2 polynomials in the thickness direction. Incorporating the layer-wise displacement models into our weak formulation, we develop a Hermitian C2 finite layer method (FLM) for addressing the current issue. The accuracy and the convergence rate of our Hermitian C2 FLM are validated by comparing the solutions it produces with the accurate two-dimensional solutions of critical loads and critical pressures of FG cylindrical macroshells and single-walled carbon nanotubes, which were reported in the literature. The numerical results show the effects of the material length-scale parameter, the inhomogeneity index, the radius-to-thickness and length-to-radius ratios, the load magnitude ratio, and the static and dynamic load factors on the first principal and first secondary instability regions of parametric resonance of simply-supported FG cylindrical microshells are significant. [ABSTRACT FROM AUTHOR]

Robustness and generalization are two challenging problems for learning point cloud representation. To tackle these problems, we first design a novel geometry coding model, which can effectively use an invariant eigengraph to group points with similar geometric information, even when such points are far from each other. We also introduce a large-scale point cloud dataset, PCNet184. It consists of 184 categories and 51,915 synthetic objects, which brings new challenges for point cloud classification, and provides a new benchmark to assess point cloud cross-domain generalization. Finally, we perform extensive experiments on point cloud classification, using ModelNet40, ScanObjectNN, and our PCNet184, and segmentation, using ShapeNetPart and S3DIS. Our method achieves comparable performance to state-of-the-art methods on these datasets, for both supervised and unsupervised learning. Code and our dataset are available at https://github.com/MingyeXu/PCNet184. [ABSTRACT FROM AUTHOR]

Objectives: Among the existing techniques for the correction of mandibular posterior vertical insufficiency (PVI), the intra-oral ramus vertical lengthening osteotomy (IORVLO) can be proposed as it allows simultaneous correction of mandibular height and retrusion. This study assessed the 3D morpho-anatomical changes of the ramus-condyle unit and occlusal stability after IORVLO. Materials and methods: This retrospective analysis compared immediate and 1-year post-operative 3D CBCT reconstructions. The analysis focused on the condylar height (primary endpoint) and on the changes in condylar (condylar diameter, condylar axis angle) and mandibular (ramus height, Frankfort-mandibular plane angle, gonion position, intergonial distance, angular remodeling) parameters. Additionally, this analysis investigated the maxillary markers and occlusal stability. Results: On the 38 condyles studied in 21 included patients (mean age 23.7 ± 3.9 years), a condylar height (CH) loss of 0.66 mm (p < 0,03) was observed, with no correlation with the degree of ramus lengthening (mean 13.3 ± 0.76 mm). Only one patient presented an occlusal relapse of Class II, but a 3.4 mm (28%) condylar diameter loss and a 33% condylar volume reduction with loss of 1 mm and 3.4 mm in CH and condyle diameter, respectively. A mean 3.56 mm (p < 0.001) decrease in ramus height was noted, mainly due to bone resorption in the mandibular angles. Conclusion: This study confirms the overall stability obtained with IORVLO for the correction of PVI. Clinical relevance: This study aims to precise indication of IORVLO, and to validate the clinical and anatomical stability of results. [ABSTRACT FROM AUTHOR]

In this work, a CFD analysis is carried out for improving the plane solar air heater performance using a converged air channel in the construction of these types of solar collectors. The inclined position of the glass cover with respect to the black absorber provides the nozzle configuration of the air duct. The accelerated flow along the converged duct prevents the growth of the thermal boundary layer and enhances the rate of convection heat transfer. It is observed from the numerical findings that the nozzle shape of the air duct provides a higher rate of heat transfer. This concept is examined numerically by the solution of the turbulent airflow equations with the conduction equation for solid parts using the finite element method and the COMSOL Multi-physics. The RANS model is employed to capture the turbulent nature of the airflow. The efficiency improvement for the test case with the contraction ratio of 2.5 is obtained by about 10% compared to the base model. The obtained numerical results are compared with experimental and theoretical data published in the literature, and good consistency is found. [ABSTRACT FROM AUTHOR]

Statement of Problem: Emerging evidence indicates that the emergence profile and subsequent restorative angle play a crucial role in clinical outcomes and can potentially affect the development and progression of peri‐implant diseases. However, the traditional evaluation of the emergence profile and angle has been limited to mesial and distal sites using periapical x‐rays, without considering the buccal sites. Purpose: To describe a novel 3D method to estimate the emergence profile and restorative angles around single implant‐supported crowns including buccal sites. Materials and Methods: A total of 30 implant‐supported crowns (11 molars, 8 premolars, 8 central incisors and 1 canine) were extra‐orally scanned using an intraoral scanner and the STL files produced were imported into a 3D software. The crown/abutment interface of each crown was delineated, and apico‐coronal lines were automatically drawn following the shape of the crown. Three reference points were defined on the apico‐coronal lines at the transition edge of the biological (BC) and the esthetic zone (EC) and the resulting angles were then calculated. The reliability of the measurements (2D and 3D) were assessed using the intraclass correlation coefficient (ICC). Results: In anterior restorations, the mean angle of the esthetic zone amounted to 162 ± 14° at mesial sites, to 140 ± 10° at buccal sites and to 163 ± 11° at distal sites. The corresponding angles at the biological zones, amounted to 155 ± 13° at mesial sites, 139 ± 15° at buccal sites and 157 ± 5° at distal sites. In posterior restorations, the mean angle of the esthetic zone amounted to 162 ± 12° at mesial sites, to 157 ± 13 at buccal sites and to 162 ± 11 at distal sites. The corresponding angles at the biological zone, amounted to 158 ± 8 at mesial sites, 150 ± 15° at buccal sites and 156 ± 10 at distal sites. The ICC for all measurements ranged between 0.77 and 0.99 indicating a good intra‐examiner reliability. Conclusion: Within the limitations of the present study, the 3D analysis seems to be a reliable and applicable method for the quantitative evaluation of the emergence profile in daily practice. Future randomized clinical trials are needed to assess whether a 3D analysis with the ensuing the emergence profile serves as a predictor for clinical outcomes. Clinical Significance: The development and implementation of a 3D workflow will provide technicians and dentists with the ability to assess the restorative angle of implant‐supported restorations during the provisional phase and the final restoration. This approach may help achieve an aesthetically pleasing restoration while minimizing potential clinical complications. [ABSTRACT FROM AUTHOR]

Objectives: The aim was to compare the porosity of different bulk-fill resin-based composites (RBCs) placement techniques to the conventional incremental technique using microcomputed tomography (μ-CT). Material and methods: Occlusal cavities were prepared on extracted human molars, divided into five groups based on the placement technique (n = 10/group). Techniques examined were Monoblock-two-step (SureFil SDR flow + Ceram.X), Monoblock-two-step (Tetric EvoFlow Bulk-Fill + Tetric EvoCeram Bulk-Fill), Monoblock-one-step (Tetric EvoCeram Bulk-Fill), Monoblock with sonic activation (SonicFill2), and incremental technique (Filtek Z250). μ-CT scanning (SkyScan, Bruker, Belgium) assessed the number, volume of closed pores, and total porosity. Analysis of variance on ranks was used (Student–Newman–Keuls method and Mann–Whitney rank-sum test), to determine the significance of RBC viscosity and the sonication placement technique. The Spearman correlation method assessed the correlation between porosity characteristics (α = 0.05). Results: The SonicFill2 presented a higher number of closed pores than the other groups (p < 0.05). The overall porosity within the restoration seemed greater in this order: Filtek Z250 > SonicFill2 > Tetric EvoFlow Bulk-Fill + Tetric EvoCeram Bulk-Fill > Tetric EvoCeram Bulk-Fill > SureFil SDR Flow + Ceram.X. Sonication was associated with increased number (p = 0.005) and volume (p = 0.036) of closed pores. A strong correlation was observed between the number and volume of closed pores (R2 = 0.549, p < 001). Conclusions: The monoblock technique with sonic activation showed significantly more internal porosity than the other placement techniques. Sonication during application contributed to the higher number and volume of closed pores than the passive bulk-fill application. Clinical relevance: Using bulk-fill materials enhances efficiency, yet void formation remains an issue, depending on viscosity and active/passive delivery of materials. Clinicians must familiarize themselves with effective placement techniques to reduce void formation and optimizing treatment outcomes. [ABSTRACT FROM AUTHOR]

Background: Understanding the anatomical structure of the human kidney, particularly its zonal and segmental organization, is crucial for both theoretical knowledge and practical applications in surgical procedures. That is why the purpose of the article was to study the variants of the zonal and segmental structure of human kidneys. Methods: 116 corrosive preparations of the arterial system of the human kidney served as the material for the study. The authors identified their extra-organ branches: a) the number of arterial vessels in the kidney hilum; b) the topographic and anatomical features of the renal artery trunks. In a 3D projection, zones of local zonal blood supply to areas of the renal parenchyma were identified, depending on the di- and trichotomic variants of the division of the main renal artery, A. renalis (I). Results: It was found that some lines of the passage of the zones of natural divisibility of the kidneys with different variants of the division of A. renalis (I). There were from 5 to 7 (6 ± 1) segments in the kidneys on average. It is possible that if a four-zone blood supply system with corresponding zones of natural kidney divisibility is found in the kidneys, where the zones mostly don’t coincide with the boundaries of the passage of segments in their classical version, the number of segments will be even greater. Conclusion: The results of the conducted study show that considering the generally accepted zones and boundaries of the passage of segments with zones of natural divisibility, which were not previously considered, the kidneys have an individual segmental structure, which requires revision. The authors believe that the generally accepted classical five-segment kidney model is outdated. [ABSTRACT FROM AUTHOR]

Abstract Robustness and generalization are two challenging problems for learning point cloud representation. To tackle these problems, we first design a novel geometry coding model, which can effectively use an invariant eigengraph to group points with similar geometric information, even when such points are far from each other. We also introduce a large-scale point cloud dataset, PCNet184. It consists of 184 categories and 51,915 synthetic objects, which brings new challenges for point cloud classification, and provides a new benchmark to assess point cloud cross-domain generalization. Finally, we perform extensive experiments on point cloud classification, using ModelNet40, ScanObjectNN, and our PCNet184, and segmentation, using ShapeNetPart and S3DIS. Our method achieves comparable performance to state-of-the-art methods on these datasets, for both supervised and unsupervised learning. Code and our dataset are available at https://github.com/MingyeXu/PCNet184 .

Abstract Background Maxillary molar distalization is a common technique used in the non-extraction treatment of Angle Class II malocclusion that can effectively correct the molar relationship and create spaces for anterior teeth alignment. However, this approach may also impact the temporomandibular joint (TMJ) due to predictable changes in the posterior vertical dimension. Despite its widespread use, Class II malocclusions correction by molar distalization with clear aligners has not been investigated for their effects on the TMJ. Therefore, this study aimed to analyze the impact of sequential molar distalization using clear aligners on the TMJ. Methods Three-dimensional CBCT scans of 23 non-growing patients (7 males, 16 females; mean age 29.8 ± 4.6 years) with skeletal class I or II malocclusion and a bilateral molar class II relationship treated by sequential upper molars distalization with orthodontic clear aligners (Invisalign, Align Technology, San Josè, Ca, USA). A total of 46 joints were examined before and after molar distalization using Anatomage InvivoDental 6.0.3. Linear and angular measurements of the mandibular joint were measured, including joint parameters, inclination, position, and the dimension of the condyle and articular fossa. In addition, 3D volumetric spaces of the joint were analyzed. All data were statistically analyzed by paired T test to determine the differences between the pre-and post-orthodontic procedures. Results No statistically significant differences were found in all primary effects resulting from maxillary molars distalization by clear aligners on TMJ components measurements and joint spaces between T0 and T1. Meanwhile, statistically significant differences were observed in the linear position of the upper molars and the molar relationship parameter with at least P ≤ 0.05. Conclusion Treatment by sequential upper molars distalization with clear aligners does not lead to significant TMJ parameters changes in condyle and fossa spaces, dimensions, and positions.

Background: The cochlear aqueduct (CA), which connects the scala tympani and the subarachnoid space, and its accompanying structures appear to have a significant relevance during cochlear implantation and an accurate visualization in clinical imaging is of great interest. Aims and Objective: This study aims to determine which potential and limitations clinically available imaging modalities have in the visualization of the CA. Methods: Micro-CT, flat-panel volume computed tomography with and without secondary reconstruction (fpVCT, fpVCTseco) and multislice computed tomography (MSCT) of 10 temporal bone specimen were used for 3D analysis of the CA. Results: FpVCTseco proved superior in visualizing the associated structures and lateral portions of the CA, which merge into the basal turn of the cochlea. All clinical imaging modalities proved equal in analyzing the length, total volume of the CA and its area of the medial orifice. Conclusion: The choice of the most accurate clinical imaging modality to evaluate the CA and its associated structures depends on the clinical or scientific question. Furthermore, this study should provide a basis for further investigations analyzing the CA. [ABSTRACT FROM AUTHOR]

Introduction: Adult degenerative scoliosis (ADS) is a 3D deformity that greatly affects the quality of life of patients and is closely related to the quality of paraspinal muscles (PSMs), but the specific degenerative characteristics have not been described. Methods: This study included ADS patients who were first diagnosed in our hospital from 2018 to 2022. Muscle volume (MV) and fat infiltration (FI) of PSM were measured by 3D reconstruction, and spinal parameters were assessed by X-ray. The values of convex side (CV) and concave side (CC) were compared. Results: Fifty patients were enrolled with a mean age of 64.1 ± 5.8 years old. There were significant differences in MV, FI, and Cobb angle between male and female groups. The MV of MF and PS on the CC was significantly larger than that on the CV. In the apex and the segments above the apex, the FI of the MF on the CC is greater than the CV, and in the CV of the segment below the apex, the FI of the MF is greater than the CC. Besides, there was a significant positive correlation between the FI and Cobb angle in the MF of the CC-CV. Conclusion: There were significant differences in the MV and FI of PSM on both sides of the spine in ADS patients. It was determined that the PSM of ADS showed different degrees of degeneration in different levels of the lumbar spine and were positively correlated with Cobb angle. [ABSTRACT FROM AUTHOR]

The article discusses three-dimensional morphologic changes in the maxillary alveolar bone after anterior tooth retraction using temporary anchorage devices (TADs) in patients with bimaxillary protrusion. Topics include orthodontic treatment with TADs, regional variations in alveolar bone changes during tooth retraction, and the significance of monitoring the crest region of the palatal alveolar bone.

Sprint start performance is measured as the horizontal external power, the time-average rate of horizontal kinetic energy generation. Although joint powers have been examined, not all segment rotations on which positive powers are exerted necessarily contribute to forward propulsion; details regarding horizontal power remain unclear. Here we show the contributions of segment rotations to the forward and upward propulsion. We calculated the joint power exerted on each segment and the contributions from segment rotations to the normalised average horizontal and vertical external powers ( P ^ hori z ¯ and P ^ vert ¯ ) during the sprint start by 12 male sprinters. Over half P ^ hori z ¯ (55 ± 6%) is due to the front thigh rotation (0.30 ± 0.04), on which the hip and knee exert positive power. Pelvic rotation does not contribute to P ^ hori z ¯ (0.00 ± 0.01). This highlights the importance of the hip-extensors strength and the need for it accompanied by the lumbar-extensors strength cancelling out the hip-extensors action on the pelvis and promoting hip-extensor-induced thigh rotation. The front thigh rotation decreases P ^ vert ¯ (−0.08 ± 0.02). P ^ vert ¯ is primarily induced by rotations of the thorax (0.04 ± 0.01), lumbar region (0.06 ± 0.02), and pelvis (0.04 ± 0.01). Rotations of the lower-limb segments did not contribute to upward propulsion. Therefore, the front thigh induces downward movement, which is counterbalanced by the trunk segments. We bridge the gap in the current understanding from joint power to P ^ hori z ¯ . We present a case involving segments on which positive joint powers are exerted similarly but play different roles: forward or upward propulsion, thereby providing insights into directional control mechanisms in explosive initiation of motion. We examined the contributions of segment rotations to the normalised average horizontal and vertical external powers ( P ^ hori z ¯ , P ^ vert ¯ ): the sprint start performance and the parameter to assess upward propulsion. Over half the total P ^ hori z ¯ (55 ± 6%) is due to the front thigh rotation, while the front thigh rotation decreases P ^ vert ¯ , which was counterbalanced by rotations of the thorax, lumbar region, and pelvis. We bridge the gap in the current understanding from joint power to P ^ hori z ¯ and further present a case involving segments on which positive joint powers are exerted but play different roles: forward or upward propulsion. [ABSTRACT FROM AUTHOR]

Background: Malcorrection of the acetabular fragment in periacetabular osteotomy (PAO) is associated with inferior outcomes. 2-dimensional radiographic parameters are being used for intraoperative verification of a satisfactory result. After reorientation of the fragment, the acetabular version must be verified with an intraoperative radiograph. In the case of an unsatisfactory correction, a reorientation would be required. A slim and radiation-free intraoperative navigation method to directly quantify the correction is highly desirable. Aim: To find out whether the measurable angulation of the supraacetabular osteotomy can be used for this purpose. Methods: To determine the angulation, 13 consecutive patients who underwent a PAO were investigated. The preoperative and postoperative standard radiographs as well as CT scans were available. The surgically produced alteration of radiographic parameters was correlated to tilting and spreading of the supraacetabular osteotomy planes. Results: Tilting of the supraacetabular osteotomy planes correlates strongly to alteration of the lateral centre-edge angle (LCEA) and the acetabular index (ACI), whereas spreading of the same planes showed also a strong correlation, but to the LCEA only. 1° of tilting resulted in a 0.2° alteration of the LCEA and a 0.5° alteration of the ACI, whereas 1° of spreading resulted in a 0.5° alteration of the LCEA. Conclusions: This study shows that the measurable angulation of the supraacetabular osteotomy planes can be used to monitor the three-dimensional reorientation of the acetabular fragment in PAO. As long as sophisticated modalities are lacking, this technique offers an easy way to intraoperatively navigate the correction in PAO. [ABSTRACT FROM AUTHOR]

Over the preceding five decades, there has been a noticeable surge in the pursuit of achieving voluminous and well-defined lips. This trend has prompted an escalating number of individuals to undergo lip augmentation procedures, aiming for a natural three-dimensional enhancement of lip volume and distinct vermilion borders. Despite the proliferation of lip augmentation techniques, there remains a dearth of comprehensive investigations into their precise effects on the three-dimensional structural integrity of the lips. This research endeavors to address this gap by employing stereophotogrammetry as a quantitative tool to scrutinize lip augmentation outcomes and to appraise the efficacy of lip plumpers. The study methodology involves a comparative analysis of lip dimensions among subjects treated with a commercial lip plumper using multi-spectral imaging for lip dimension assessment, coupled with markerless tracking technology and 3D interpolating surface methodology to analyze lip volume and shape. Additionally, the study evaluated lip youth state, including moisture level, softness, firmness, and tissue density. The demand for lip augmentation procedures is driven by perceived advantages such as quick recovery and minimal risk. Therefore, it is crucial to substantiate their efficacy with robust findings. The investigation suggests that both 3D and 2D stereophotogrammetry techniques are reliable for evaluating lip size before and after augmentation, whether through cosmetic or aesthetic approaches. Overall, the study provides a comprehensive analysis of a lip treatment aimed at enhancing volume and redesigning lip lines. It demonstrates that stereophotogrammetry is effective for assessing 3D lip dimensions and their correlation with internal lip structure. This research could be particularly valuable for evaluating the efficacy and duration of various lip enhancement techniques, including dermal fillers, implants, and topical cosmetic formulations, offering quantitative and reproducible assessments over time.

Natural extracts, such as those from the residues of the Olea europaea industry, offer an opportunity for use due to their richness in antioxidant compounds. These compounds can be incorporated into porous polymeric devices with huge potential for tissue engineering such as bone, cardiovascular, osteogenesis, or neural applications using supercritical CO2. For this purpose, polymeric scaffolds of biodegradable poly(lactic-co-glycolic acid) (PLGA) and chitosan, generated in situ by foaming, were employed for the supercritical impregnation of ethanolic olive leaf extract (OLE). The influence of the presence of chitosan on porosity and interconnectivity in the scaffolds, both with and without impregnated extract, was studied. The scaffolds have been characterized by X-ray computed microtomography, scanning electron microscope, measurements of impregnated load, and antioxidant capacity. The expansion factor decreased as the chitosan content rose, which also occurred when OLE was used. Pore diameters varied, reducing from 0.19 mm in pure PLGA to 0.11 mm in the two experiments with the highest chitosan levels. The connectivity was analyzed, showing that in most instances, adding chitosan doubled the average number of connections, increasing it by a factor of 2.5. An experiment was also conducted to investigate the influence of key factors in the impregnation of the extract, such as pressure (10–30 MPa), temperature (308–328 K), and polymer ratio (1:1–9:1 PLGA/chitosan). Increased pressure facilitated increased OLE loading. The scaffolds were evaluated for antioxidant activity and demonstrated substantial oxidation inhibition (up to 82.5% under optimal conditions) and remarkable potential to combat oxidative stress-induced pathologies.

Climbing is a fast-growing sport, with one of the most common injuries being a rupture of the finger flexor tendon pulley. The strain on pulleys increases as finger joints flex. However, to our knowledge, no study has conducted a kinematic analysis of climbers’ fingers. Thus, this study aimed to examine finger kinematics during typical climbing tasks. Eleven elite climbers performed a sequence of four climbing moves, which were recorded by an optical motion capture system. Participants used crimp, half-crimp, and open-hand grips for three trials each, with the fourth condition involving campusing using any grip except crimp. Mean proximal interphalangeal joint (PIP) flexion during the holding phase was 87° (SD 12°), 70° (14°) and 39° (27°) for the crimp, half-crimp and open-hand grip, respectively. Hence, inter-individual PIP flexion ranges overlap between different gripping conditions. Two different movement patterns emerged in the open-hand grip, possibly influenced by the use of the little finger, leading to varying degrees of flexion in the middle and ring fingers. Avoiding little finger usage in the open-hand grip may reduce load during pulley rupture rehabilitation. The implications of PIP joint angle variability on individual pulley injury risk or prevention warrant further investigation. Motion capture proved effective for understanding finger kinematics during climbing and could guide future studies on pulley injury risk factors.

Cases of rockfalls that occurred on a slope in the Selendi District of Manisa Province are evaluated in this article. Field studies are evaluated and different measures are examined to reduce rockfall risk. Drone flights are used to evaluate previous studies and obtain 1/1000 scale digital topographic maps. These maps are used to create a 3D (three-dimensional) solid model of the project site, and on-site surveys are conducted to identify source rock locations and free blocks that pose a risk. Those 3D analyses are used to determine the paths, jump heights, and energies of the blocks in motion. The data from the 3D maps are used to determine the most appropriate remediation methods. The structural behavior of the recommended gabion wall, which is designed at a certain height and width as a result of rockfalls, has been examined. Structural behavior is determined by simulation based on the finite element model. Within the scope of this study, the ANSYS Workbench program is used. The “Explicit Dynamics” analysis type in ANSYS Workbench was chosen to examine the rockfall effect.

Background: The knowledge of 3-dimensional scapular kinematics is essential for understanding the pathological lesions of the shoulder and elbow in throwing athletes. Many studies about alterations of the resting scapular position, dynamic scapular motion, or scapular dyskinesis (SD) have been conducted, yet none of them have identified a consistent pattern of altered scapular kinematics in throwing athletes. Hypothesis/Purpose: To analyze the 3-dimensional scapular kinematics of dominant and nondominant arms in baseball players with a pathological condition of the shoulder or elbow. Study Design: Cross-sectional study. Methods: Bilateral scapular positions, consisting of upward rotation (UR), superior translation (ST), internal rotation (IR), protraction (PRO), and anterior tilting (AT) with an arm at rest and at 150° forward elevation, were measured among 319 baseball players with SD using 3-dimensional computed tomography. Angular values of scapula were compared between dominant and nondominant arms with statistical analysis. Level of Evidence: Level III, diagnostic study. Results: The scapular position of dominant arms showed significantly more AT, less ST at rest and more UR and IR and less ST, PRO, and AT at 150° full forward elevation compared with the nondominant arms. The magnitude of mean change of UR, IR, PRO, and AT during arm elevation increased significantly between the paired arms (P value: UR, ST, PRO, and AT: <.001 and IR: .001). Conclusion: When compared with the nondominant arms, UR, AT, and PRO with the arm at 150° forward elevation of dominant symptomatic arms in baseball players tilted toward positive compensation, whereas IR altered toward negative decompensation. In addition, the angular increment of the scapula increased significantly in dominant symptomatic arms compared with the nondominant arms. [ABSTRACT FROM AUTHOR]

ObjectivesRecurrent patellar dislocation (RPD) greatly affects active young individuals, necessitating the identification of risk factors for a better understanding of its cause. Previous research has connected RPD to lower limb alignment (LEA) abnormalities, such as increased femoral anteversion, tibial external rotation, knee valgus, and flexion. This study aims to use EOS technology to detect RPD-related LEA anomalies, enabling three-dimensional assessment under load conditions.MethodsA total of 100 limbs (50 in the RPD group, 50 in the control group) were retrospectively analyzed. In the RPD group, we included limbs with recurrent patellar dislocation, characterized by dislocations occurs at least two times, while healthy limbs served as the control group. We used EOS technology, including 2D and 3D imaging, to measure and compare the following parameters between the two groups in a standing position: Femoral neck shaft angle (NSA), Mechanical femoral tibial angle (MFTA), Mechanical lateral distal femoral angle (mLDFA), Medial proximal tibial angle (MPTA), Anatomical femoral anteversion (AFA), External tibial torsion (ETT), and Femorotibial rotation (FTR).ResultsThe significant differences between the two groups were shown in NSA 3/2D, MFTA 3/2D, mLDFA 3/2D, MPTA 3D, AFA, FTR. No significant difference was shown in MPTA 2D, ETT between the RPD group and the control group. Further binary logistic regression analysis. Further binary logistic regression analysis was conducted on the risk factors affecting RPD mentioned above. and found four risk factors for binary logistic regression analysis: mLDFA (3D), AFA, NSA(3D), and FTR.ConclusionsEOS imaging identified abnormal LEA parameters, including NSA, MFTA, mLDFA, MPTA, AFA, and FTR, as risk factors for RPD. Children with these risk factors should receive moderate knee joint protection.

This study aimed to evaluate by microCT the preparation of the artificial teeth (ATs), TrueTooth®, versus natural teeth (NTs): (1) the time and number of pecking movements needed for preparation; (2) the root canal volume increase; (3) if the pulp-colored medium has any effect on the 3D analysis. Material and Methods: Artificial and natural maxillary molars were used. Fourteen AT distobuccal canals and fourteen NT buccal canals were used for the first and second aim and fourteen AT mesiobuccal canals for the third aim. Results: No statistically significant differences were observed regarding the time and number of pecking movements (p > 0.05); for the root canal volume increase, a statistically significant difference was observed (p < 0.05) with a higher mean value for NTs; however, in the group of ATs, there was a volume decrease in three cases. The AT mesiobuccal root canal mean volume increase was also negative. Conclusions: There are no differences between the time and number of pecking movements between NTs and ATs, so TrueTooth® can potentially be used in endodontic training. The volume increase between ATs and NTs was higher in NTs. However, some samples showed negative values, also seen in the AT mesiobuccal canal, confirming that the pulp-colored medium has an effect on the 3D analysis. [ABSTRACT FROM AUTHOR]

Corals play a crucial role as the primary habitat-building organisms within reef ecosystems, forming expansive structures that extend over vast distances, akin to the way tall buildings define a city's skyline. However, coral reefs are vulnerable to damage and destruction due to their inherent fragility and exposure to various threats, including the impacts of climate change. Similar to successful city management, the utilization of advanced underwater videography, photogrammetric computer vision, and machine learning can facilitate precise 3D modeling and the semantic mapping of coral reefs, aiding in their careful management and conservation to ensure their survival. This study focuses on generating detailed 3D mesh models, digital surface models, and orthomosaics of coral habitats by utilizing underwater coral images and control points. Furthermore, an innovative multi-modal deep neural network is designed to perform the pixel-wise semantic segmentation of orthomosaics, enabling the projection of resulting semantic maps onto a 3D space. Notably, this study achieves a significant milestone by accomplishing semantic fine-grained 3D modeling and rugosity evaluation of coral reefs with millimeter-level accuracy, providing a potent means to understand coral reef variations under climate change with high spatial and temporal resolution. [ABSTRACT FROM AUTHOR]

This study investigated the impact of blood flow restriction (BFR) during treadmill walking on gait kinematics. Twenty-one participants completed one familiarisation and four experimental sessions, including two walking speeds (moderate [5.0 ± 0.3km·h−1] and fast [6.4 ± 0.4km·h−1]) and two occlusion conditions (BFR [60% of arterial occlusion pressure] and unrestricted). For each exercise intensity, the BFR session was performed first. Participants were instructed to walk as long as possible, with sessions capped at 20 min. Unrestricted sessions were time-matched, and the order of exercise intensity was randomised. Kinematics were collected over 10s every minute using retro-reflective markers affixed to specific body landmarks. Ratings of perceived exertion and discomfort were collected every two minutes. Blood samples were collected from the fingertip pre-exercise and the finger and toe post-exercise, and were analysed for lactate, electrolytes, and markers of cell-membrane damage. During the BFR sessions the cuffs remained inflated while the blood samples were collected. Fast-walk BFR sessions exhibited higher anterior trunk flexion (p = 0.001) and knee flexion during stance (p = 0.001) compared to all other sessions. Step width was increased during BFR sessions (p = 0.001), but no difference in step length (p = 0.300) or cadence (p = 0.922) were observed. The time required to elicit change in anterior trunk flexion and plantar-flexion angle at toe-off was shorter during BFR sessions (p = 0.024). The BFR sessions elicited the highest ratings of perceived exertion and discomfort, as well as blood lactate concentration (p ≤ 0.001). Application of BFR during moderate and fast treadmill walking modifies gait kinematics and exacerbates exercise-related sensations as well as blood lactate concentration. Applying blood flow restriction changes walking kinematics, causing an overall increase in anterior trunk flexion and knee flexion during stance while simultaneously reducing plantar-flexion angle at toe-off and ankle joint velocity. Applying blood flow restriction exacerbate exercise-related sensations of exertion and discomfort. Sample site does not influence the level of post-exercise blood lactate or markers of cell-membrane potential and damage. [ABSTRACT FROM AUTHOR]

Background: Maxillary molar distalization is a common technique used in the non-extraction treatment of Angle Class II malocclusion that can effectively correct the molar relationship and create spaces for anterior teeth alignment. However, this approach may also impact the temporomandibular joint (TMJ) due to predictable changes in the posterior vertical dimension. Despite its widespread use, Class II malocclusions correction by molar distalization with clear aligners has not been investigated for their effects on the TMJ. Therefore, this study aimed to analyze the impact of sequential molar distalization using clear aligners on the TMJ. Methods: Three-dimensional CBCT scans of 23 non-growing patients (7 males, 16 females; mean age 29.8 ± 4.6 years) with skeletal class I or II malocclusion and a bilateral molar class II relationship treated by sequential upper molars distalization with orthodontic clear aligners (Invisalign, Align Technology, San Josè, Ca, USA). A total of 46 joints were examined before and after molar distalization using Anatomage InvivoDental 6.0.3. Linear and angular measurements of the mandibular joint were measured, including joint parameters, inclination, position, and the dimension of the condyle and articular fossa. In addition, 3D volumetric spaces of the joint were analyzed. All data were statistically analyzed by paired T test to determine the differences between the pre-and post-orthodontic procedures. Results: No statistically significant differences were found in all primary effects resulting from maxillary molars distalization by clear aligners on TMJ components measurements and joint spaces between T0 and T1. Meanwhile, statistically significant differences were observed in the linear position of the upper molars and the molar relationship parameter with at least P ≤ 0.05. Conclusion: Treatment by sequential upper molars distalization with clear aligners does not lead to significant TMJ parameters changes in condyle and fossa spaces, dimensions, and positions. [ABSTRACT FROM AUTHOR]

Nd:YAG laser is in common clinical use for the treatment of tissue incision, transpiration, and haemostasis in soft tissues. However, few studies have reported the effects of low-level laser therapy (LLLT) from Nd:YAG laser on bone healing. The aim of this study was to perform three-dimensional (3D) morphological evaluation of the photobiomodulation of Nd:YAG laser in bone defects in rat tibiae using micro-computed tomography CT (micro-CT) imaging. A bone defect was created in each tibia of 30 rats. The right side was treated with LLLT from Nd:YAG laser (LT group) daily until sacrifice and the left tibiae served as controls (control group). All tibiae underwent micro-CT imaging at 7, 14, and 21 days after the operation. Three-dimensional image analysis of bone volume (BV) and bone surface area (BS) of new bone formation in the defects was performed and histologic analysis was conducted for all tibiae. Tibial BV and BS values were highest in both groups at 7 days after the operation and decreased at 14 days after operation. BV and BS values were both significantly higher in the LT group than in the control group at 7 and 14 days. There was no significant difference between the groups for either metric at 21 days. The present findings demonstrate that Nd:YAG laser simulates bone formation during the early healing period. [ABSTRACT FROM AUTHOR]

In a running single-leg jump (RSLJ) for distance, the generation of vertical velocity without loss of horizontal velocity during the take-off phase is ideal, but difficult; however, we hypothesized that the pelvic rotation in the frontal plane achieved it. Here we show the effect of each segment rotation on the horizontal and vertical kinetic energies ( E h o r i z and E v e r t ) of the centre of mass (CoM) during the take-off phase of an RSLJ for distance. We collected kinematic and ground-reaction-force data during RSLJs for distance by nine male long jumpers, involving an approximately 20-m approach in an outdoor field. We determined the components of the E h o r i z and E v e r t changes due to each segment movement. Elevation of the pelvic free-leg side increased E v e r t (0.53±0.16 J/kg, 9±3% of the total E v e r t change). Pelvic axial rotation decreased E h o r i z , while pelvic elevation did not affect it (0.01±0.02 J/kg, no significant difference from zero). In contrast, forward rotations of the stance-leg shank and thigh decreased E h o r i z while simultaneously increasing E v e r t . The results showed that pelvic elevation increased the vertical CoM velocity without causing a loss in horizontal velocity, although the lower-limb segments' effects on the vertical and horizontal velocities exhibited a trade-off, as previously speculated. RSLJs for distance have been frequently assumed as sagittal movements. However, our findings highlight the importance of three-dimensional pelvic movement, particularly in the frontal plane, for controlling both the vertical and horizontal velocities. Highlights l We show the effect of each segment rotation on the horizontal and vertical kinetic energies ( E h o r i z and E v e r t ) of the centre of mass during the take-off phase of a running single-leg jump for distance. l Elevation of the pelvic free-leg side increased E v e r t but did not decrease E h o r i z , while the forward rotations of the stance-leg thigh and shank decreased E h o r i z , while simultaneously increasing E v e r t . l We highlight the importance of pelvic movement in the frontal plane for controlling both the vertical and horizontal velocities with single-leg stance. [ABSTRACT FROM AUTHOR]

The cervix is a collagen-rich connective tissue that must remain closed during pregnancy while undergoing progressive remodeling in preparation for delivery, which begins before the onset of the preterm labor process. Therefore, it is important to resolve the changes of collagen fibers during cervical remodeling for the prevention of preterm labor. Herein, we assessed the spatial organization of collagen fibers in a three-dimensional (3D) context within cervical tissues of mice on day 3, 9, 12, 15 and 18 of gestation. We found that the 3D directional variance, a novel metric of alignment, was higher on day 9 than that on day 3 and then gradually decreased from day 9 to day 18. Compared with two-dimensional (2D) approach, a higher sensitivity was achieved from 3D analysis, highlighting the importance of truly 3D quantification. Moreover, the depth-dependent variation of 3D directional variance was investigated. By combining multiple 3D directional variance-derived metrics, a high level of classification accuracy was acquired in distinguishing different periods of pregnancy. These results demonstrate that 3D directional variance is sensitive to remodeling of collagen fibers within cervical tissues, shedding new light on highly-sensitive, early detection of preterm birth (PTB). [ABSTRACT FROM AUTHOR]