Search

为降低棉籽蛋白中的棉酚含量，结合生产实际，研究了棉籽加工生产线中低温棉籽蛋白棉酚含量的影响因素，对低温棉籽蛋白的加工工艺进行了优化。结果表明，生产低温棉籽蛋白的最佳工艺条件为：预处理工段入浸棉坯粉末度10%左右，入浸棉坯水分4%左右；浸出工段新鲜溶剂甲醇体积分数92%~93%，甲醇循环液甲醇体积分数78%~80%（第1梯度）、65%~68%（第2梯度），料液比（物料质量与新鲜甲醇体积比）1∶ 0.5~1∶ 0.6，甲醇循环液温度50~53 ℃，浸出器不低于二段梯度逆流萃取；烘干工段应尽可能延长烘干工序时间，采取多道多台低温烘干设备，梯度连续烘干物料。在最佳工艺条件下，低温棉籽蛋白中棉酚含量降低至400 mg/kg以下。 In order to reduce the gossypol content in cottonseed protein, combined with production practice, the factors affecting gossypol content in low temperature cottonseed protein in cottonseed processing line were studied and the process of producing low temperature cottonseed protein was optimized. The results showed that the optimal process conditions were obtained as follows: powder degree of cottonseed flake about 10% and moisture content of cottonseed flake about 4% in the pretreatment section; volume fraction of methanol in fresh solvent 92%-93%, volume fraction of methanol in methanol circulating liquid in the first gradient 78%-80%, and 65%-68% in the second gradient, ratio of material mass to fresh methanol volume 1∶ 0.5-1∶ 0.6, methanol circulating liquid temperature 50-53 ℃ and not lower than two-stage gradient countercurrent extraction in the leaching section; as far as possible to extend the drying process time, taking many low temperature drying equipment and gradient continuous drying materials in the drying section. Under the optimal conditions, the gossypol content in low temperature cottonseed protein decreased to less than 400 mg/kg.

Copyright of Journal of Forest & Environment is the property of Journal of Forest & Environment Editorial and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To address the problem that the bearings fault signals are usually contaminated by strong background interference due to multiple structures and complex transmission path, which affects accurate fault feature extraction of the bearings. A multi-signals improved empirical Fourier decomposition (MS-IEFD) method was proposed. Firstly, to fully utilize the fault characteristics in multiple signals, the improved empirical Fourier decomposition was applied to two signals acquired from different measuring points, the optimal decomposition number was determined based on the correlation coefficients threshold 0. 1 between each modal functions and the original signal. Secondly, the weighted harmonics significant index was constructed to optimize the initial band division results, it reduced the invalid frequency bands with too narrow bandwidth and determined the optimal modal components. Then, with the advantage of cross-correlation analysis, the optimal modal functions of the two signals were analyzed and the fault signature was further enhanced. With the help of fast Fourier transform, the fault features of bearings were accurately extracted and the type of bearing fault was judged. Finally, the MS-IEFD method was applied to the simulation and experimental signals. Two simulation signals with the signal-to-noise ratios of - 10 dB and - 15 dB were constructed to simulate the signals at different measurement points, the bearing vibration signals at different measurement points were selected for the experimental analysis. The research results show that the MS-IEFD method can effectively extract the fault characteristics of rolling element bearing from strong background interference. When comparing with methods such as the variational mode decomposition ( VMD), the effectiveness of the MS-IEFD method is further highlighted. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Pharmaceutical Practice & Service is the property of Journal of Pharmaceutical Practice Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Guangdong Architecture Civil Engineering is the property of Guangdong Architecture Civil Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Natural Gas Industry is the property of Natural Gas Industry Journal Agency and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Nonferrous Metals (Mineral Processing Section) is the property of Beijing Research Institute of Mining & Metallurgy Technology Group and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of e-Education Research is the property of Northwest Normal University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Pearl River is the property of Pearl River Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of National University of Defense Technology / Guofang Keji Daxue Xuebao is the property of NUDT Press and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Guihaia is the property of Guihaia Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Water Conservancy Science & Techonlogy & Economy is the property of Water Conservancy Science & Technology & Economy Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Hubei Open Vocational College is the property of Journal of Hubei Open Vocational College Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Publishing Journal is the property of Wuhan University, School of Information Science and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Zhejiang Electric Power is the property of Zhejiang Electric Power Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Zhejiang Electric Power is the property of Zhejiang Electric Power Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Aiming at the two problems that most existing deep network-based fusion approaches have complex network architecture with high computation cost, and they fail to adequately consider the intrinsic characteristics of multi-modal images which results in insufficient information interaction of cross-modality features, a re-parameterized infrared and visible image fusion network based on coordinate attention is proposed. In this network, re-parameterization technique is introduced and combined with residual learning to perform feature extraction for computing efficiency and satisfying fusion quality. Moreover, to improve the interactivity of cross-modality features and fully utilize multi-modal image information, a coordinate attention-based fusion module is devised to yield fused feature. Considering the information loss during extracting process, a fused feature enhance module which leverages the preceding cross-modality features to implement feature compensation is further developed. Extensive experiments demonstrate that the proposed method not only has lower computational cost, but also achieves the improvement of multiple objective evaluation metrics while ensuring good visual effects. [ABSTRACT FROM AUTHOR]

Copyright of Polymer Materials Science & Engineering is the property of Sichuan University, Polymer Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Power Engineering Technology is the property of Editorial Department of Electric Power Engineering Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Food Safety & Quality is the property of Journal of Food Safety & Quality Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shandong Medical Journal is the property of Shandong Medical Health Newspapers and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To observe the effects of xiaoer feire kechuan granules combined with acetylcysteine solution for aerosol inhalation on pulmonary ventilation function, inflammatory factor and immunoglobulin in children with bronchial pneumonia. 100 children with bronchial pneumonia who were admitted to the Hefei Second People's Hospital from September 2019 to January 2023were selected, and children were divided into control group and study group by double chromosphere method, with 50 cases in each group. Children in control group were treated with acetylcysteine solution for aerosol inhalation, and children in study group were treatedwith xiaoer feire kechuan granules on the basis of control group. The clinical symptoms, inflammatory factor levels [interleukin-6 (IL-6),procalcitonin (PCT), C-reactive protein (CRP)], immunoglobulin [immunoglobulin (Ig) A, IgM, IgG], pulmonary ventilation function indexes [inspiratory time (TI), expiratory time (TE), inspiratory-expiratory ratio (TI/TE), peak time ratio (TPF%TE), peak volume ratio(VPF%VE)] and incidence of adverse reactions were compared between two groups. Compared with control group, the disap-pearance time of lung wet rales, disappearance time of cough, disappearance time of expectoration and disappearance time of fever in study group were shorter (P<0.05). CRP, IL-6 and PCT in study group were lower than those in control group 10 days after treatment(P<0.05). IgA, IgM and IgG in study group were higher than those in control group 10 days after treatment (P<0.05). TI, TE, TI/TE,TPF%TE and VPF%VE in study group were higher than those in control group 10 days after treatment (P<0.05). There was no difference in the incidence of adverse reactions between two groups (P>0.05). The combination of xiaoer feire kechuan granules and acetylcysteine solution for aerosol inhalation in the treatment of bronchial pneumonia could effectively shorten the remission time of clinical symptoms, improve pulmonary ventilation function, reduce the level of inflammatory factor, regulate immunoglobulin, and had good safety. [ABSTRACT FROM AUTHOR]

Point cloud completion plays a crucial role in point cloud processing tasks, as it enhances data quality, assists in generating accurate 3D models, and provides reliable data support for various applications. However, existing point cloud completion algorithms based on deep neural networks use a simple single-level global feature extraction method, which does not fully exploit latent semantic information and leads to the loss of some detailed information during the encoding process. To address these issues, this paper proposes a novel point cloud completion network that employs a multi-scale feature fusion approach and introduces a new pooling method by combining an attention mechanism. Experimental results demonstrate that the proposed network achieves the State-of-the-Art (SOTA) performance on three datasets, namely PCN, ShapeNet34, and ShapeNet55, indicating its superior feature representation capability and completion effectiveness. [ABSTRACT FROM AUTHOR]

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electric Drive for Locomotives is the property of Electric Drive for Locomotives Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Railway Investigation & Surveying is the property of Railway Investigation & Surveying Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Earth Sciences & Environment is the property of Journal of Earth Sciences & Environment and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Nonferrous Metals (Mineral Processing Section) is the property of Beijing Research Institute of Mining & Metallurgy Technology Group and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Modern Medicine & Health is the property of Journal of Modern Medicine & Health and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Inorganic Chemicals Industry is the property of Editorial Office of Inorganic Chemicals Industry and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Food & Machinery is the property of Food & Machinery Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Water Conservancy Science & Techonlogy & Economy is the property of Water Conservancy Science & Technology & Economy Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Advanced Textile Technology is the property of Zhejiang Sci-Tech University Magazines and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Inorganic Chemicals Industry is the property of Editorial Office of Inorganic Chemicals Industry and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bearing is the property of Bearing Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of National University of Defense Technology / Guofang Keji Daxue Xuebao is the property of NUDT Press and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Chinese Medical Equipment Journal is the property of Chinese Medical Equipment Journal Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)