Search

Tn this paper, the dispersion mechanism of thermal reduction graphene oxide (TRGO) and graphene oxide (GO) in cement mortar environment was studied, and the effect of single and multiple mixing of these two conductive phases on the mechanicai/electricai properties of mortar was explored. The results show that GO can promote the dispersion of TRGO in calcium-rich and high-alkali environment, and the optimal dispersion mass ratio is 3: 1 0 wt%. Compared with TRGO mixed alone, the compound mixing of GO promotes the formation of sheet structure and interweaving of mortar hydration products, which significantly improves mechanical properties. When GO: TRG() = ().: 3: 1.0 wt%, the flexural and compressive strength of 28 d cements increases by 21.34% and 34.52% compared with single mixed TRGO, but the mechanical properties decrease with the increase of mixing amount. The electrical conductivity of cement mortar increases with the increase of GO and TRGO conductive phases. When GO: TRGO = 0.12: ().4 wt%, the resistivity of the 28-day age cement shows a sudden change, indicating that the system has a percolation threshold. Under the optimal dispersion ratio, when TRGO' amount exceeds ().7 wt%, the increasing content on the resistivity tends to be flat and lower, implying that ().7 wt% TRGO is the threshold of adding content to the resistivity. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Functional Materials / Gongneng Cailiao is the property of Chongqing Functional Materials Periodical Press and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Bulletin of the Chinese Ceramic Society is the property of Bulletin of the Chinese Ceramic Society Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)