Search

为确保网络高效稳定运行, 管理者有必要对路由更新进行过滤. 本文设计了基于多自治系统 的路由过滤仿真实验, 并详细阐述了被动接口、分发列表、路由映射表以及前缀列表等技术的工作 原理. 给出了在OSPF 路由域中使用分发列表过滤路由、在RIP 路由域中使用被动接口和分发列表 过滤路由、在路由重分发过程中使用路由映射表过滤路由、在EIGRP 路由域中使用前缀列表实现 链路分流、以及使用BGP 协议实现自治系统间互联的详细配置过程, 并形成了明确的分析结论. 上 述研究不仅有助于读者对路由过滤相关技术和BGP 协议工作原理的理解, 而且还有助于熟练掌握 其配置方法. In order to ensure the efficient and stable operation of the network, network managers must control and adjust the routing update. This paper designs a simulation experiment of route filtering based on a multi-autonomous system, and describes the working principle of passive interface, distribution list, route mapping table and prefix list in detail. The detailed configuration process of using distribution list to filter routing in OSPF routing domain, using passive interface and distribution list to filter routing in RIP routing domain, using route mapping table to filter routing in route redistribution process, using prefix list to implement link splitting in EIGRP routing domain, and BGP protocol to realize interconnection between autonomous systems are given conclusion. The above research not only helps readers understand the routing filtering technology and BGP protocol, but also helps to master its configuration method. [ABSTRACT FROM AUTHOR]

In the simulation environment of GNS, this paper designs the routing simulation experiment scheme of multiautonomous system. This paper proves that connectivity of multi-autonomous systems can be achieved, by assigning reasonably OSPF, RIP, EIGRP, and BGP dynamic routing protocols. In addition, it also analyzes the division of the OSPF area, election of DR/BDR in OSPF routing protocol, distribute-list and deployment of BGP routing protocol among autonomous systems. This research can make students understand and master the common working principles and configuration methods of common dynamic routing protocols. Thus, it is valuable in solving the routing configuration problems encountered in reality. [ABSTRACT FROM AUTHOR]

This paper introduces the working principle of SLB technology in detail, and offers a scheme to guarantee the reliability of application system and to reduce the working pressure of single server by using its characteristics. It also gives the detailed configuration commands under different working modes. The simulation test proves scheme is effective and practicable. When the servers run normally, the balanced traffic load should be achieved, and the service requests of the users can be answered respectively. Once a server fails, other servers will continue to respond to the users’ request without any interruption. [ABSTRACT FROM AUTHOR]

To improve the reliability ol network, network redundancy and load balance should be designed in multioutlet campus network boundary. First of all, this paper describes the working principles of GLBP protocol and SLA protocol, then it offers the special plan to improve reliability in multi-outlet network boundary with combination of GLBP and SLA. In the case of campus network problem, the authors test the connectivity of the computer in the campus network to access the Internet destination address. Finally, the feasibility and ellectiveness of the design are proved. [ABSTRACT FROM AUTHOR]

This paper mainly introduces the application of HSRP and RIP protocols to realize the design and verification process of multiple load balancing in network exports, and gives the detailed equipment configuration command. When the routers work in normal status, they will achieve multiple groups of network load balance. When one of the routers fails, the backup router will work, so that the stability of the network exports is ensured. [ABSTRACT FROM AUTHOR]