Search

Abstract The NanoSight LM10 with Nanoparticle tracking analysis (NTA) software was evaluated for the quantification of latex particles, adenovirus 5, and influenza virus. The inter-day variability was determined by measuring the same sample over several consecutive days and the method’s accuracy was demonstrated by using known concentrations of the subject particles. NTA analysis was also used to quantify chromatographic fractions of adenovirus and influenza virus after purification on a CIM monolithic column. NTA results were compared and evaluated against hemagglutination (HA) and end point dilution assay, determining total and infection virus particle number, respectively. The results demonstrated that nanoparticle tracking analysis is a method for fast estimation of virus concentration in different samples. In addition, it can provide a better insight into the sample status, regarding the level of virus aggregation.

Background: Fluorescent proteins (FPs) are pivotal reagents for flow cytometry analysis or fluorescent microscopy. A new generation of immunoreagents (fluobodies/chromobodies) has been developed by fusing recombinant nanobodies to FPs. Methods: We analyzed the quality of such biomolecules by a combination of gel filtration and SDS-PAGE to identify artefacts due to aggregation or material degradation. Results: In the SDS-PAGE run, unexpected bands corresponding to separate fluobodies were evidenced and characterized as either degradation products or artefacts that systematically resulted in the presence of specific FPs and some experimental conditions. The elimination of N-terminal methionine from FPs did not impair the appearance of FP fragments, whereas the stability and migration characteristics of some FP constructs were strongly affected by heating in loading buffer, which is a step samples undergo before electrophoretic separation. Conclusions: In this work, we provide explanations for some odd results observed during the quality control of fluobodies and summarize practical suggestions for the choice of the most convenient FPs to fuse to antibody fragments.

S. epidermidis is an important opportunistic pathogen causing chronic prosthetic joint infections associated with biofilm growth. Increased tolerance to antibiotic therapy often requires prolonged treatment or revision surgery. Phage therapy is currently used as compassionate use therapy and continues to be evaluated for its viability as adjunctive therapy to antibiotic treatment or as an alternative treatment for infections caused by S. epidermidis to prevent relapses. In the present study, we report the isolation and in vitro characterization of three novel lytic S. epidermidis phages. Their genome content analysis indicated the absence of antibiotic resistance genes and virulence factors. Detailed investigation of the phage preparation indicated the absence of any prophage-related contamination and demonstrated the importance of selecting appropriate hosts for phage development from the outset. The isolated phages infect a high proportion of clinically relevant S. epidermidis strains and several other coagulase-negative species growing both in planktonic culture and as a biofilm. Clinical strains differing in their biofilm phenotype and antibiotic resistance profile were selected to further identify possible mechanisms behind increased tolerance to isolated phages.

Immobilized enzyme reactors (IMERs) are critical tools for developing novel oligosaccharides based on the enzymatic catalysis of polysaccharides. In this paper, a novel glucuronan lyase from Peteryoungia rosettiformans was produced, purified, and then immobilized on a CIM® CDI disk for cleaving glucuronan. The results showed that around 63.6% of glycuronan lyases (800.9 μg) were immobilized on the disk. The Vmax values of immobilized glucuronan lyases did not significantly change (56.9 ± 4.7 μM∙min−1), while the Km values (0.310 ± 0.075 g∙L−1) increased by 2.5 times. It is worth noting that immobilized glucuronan lyases overcame the catalytic inhibition of free enzymes observed under high glucuronan concentrations (0.5–2 g∙L−1). circumscribed central composite design (CCCD) and response surface methodology (RSM) showed that glucuronan concentration, flow rate, and reaction time significantly affected the yield of oligoglucuronans. The degree of polymerization (DP) of degraded glucuronan ranged from DP 2–8 according to the results obtained by high performance anion exchange chromatography coupled with a pulsed amperometric detector (HPAEC-PAD). The IMER retained 50.9% activity after running 2373 column volumes of glucuronan. Finally, this glucuronan lyase reactor was tentatively connected to an immobilized laccase reactor to depolymerize, and gallic acid (GA) was added to glucuronan. Approximately 8.5 mg of GA was added onto 1 g of initial glucuronan, and the GA–oligoglucuronan conjugates showed notable antioxidant activity. [ABSTRACT FROM AUTHOR]

Listeria monocytogenes is a pathogenic bacterium that can form biofilms in food processing plants, allowing the bacteria to survive despite the control measures applied. As the surface of the bacteria is covered with versatile polysaccharides and proteins, these influence the interactions of the bacterium with any surface. The unique properties and high stability of fungal proteins make them good candidates for the control of bacteria by targeting surface structures. We screened a group of fungal lectins and protease inhibitors from different fungal species, protein folds and known targets for their antibacterial and antibiofilm activity against model strains of Listeria innocua and Listeria monocytogenes. Several of them significantly decreased the viability of biofilm bacteria, but had no effect on bacterial growth parameters at 37°C and thus had no antibacterial activity. Fungal lectins significantly impaired biofilm development even at room temperature, which was attributed to exposure to lectins during adhesion. The tested fungal proteins also reduced biofilm development on biological model surfaces. The observed antibiofilm activity of fungal proteins suggests that they have the potential to modulate interactions between bacteria and/or between bacteria and surfaces, which could be used in the future to reduce surface contamination by Listeria. [ABSTRACT FROM AUTHOR]

Air pollution is an environmental factor associated with an increased risk of neurodegenerative diseases, such as Alzheimer's and Parkinson's, characterized by decreased cognitive abilities and memory. The limited models of sporadic Alzheimer's disease fail to replicate all pathological hallmarks of the disease, making it challenging to uncover potential environmental causes. Environmentally driven models of Alzheimer's disease are thus timely and necessary. We used live-cell confocal fluorescent imaging combined with high-resolution stimulated emission depletion (STED) microscopy to follow the response of retinoic acid-differentiated human neuroblastoma SH-SY5Y cells to nanomaterial exposure. Here, we report that exposure of the cells to some particulate matter constituents reproduces a neurodegenerative phenotype, including extracellular amyloid beta-containing plaques and decreased neurite length. Consistent with the existing in vivo research, we observed detrimental effects, specifically a substantial reduction in neurite length and formation of amyloid beta plaques, after exposure to iron oxide and diesel exhaust particles. Conversely, after exposure to engineered cerium oxide nanoparticles, the lengths of neurites were maintained, and almost no extracellular amyloid beta plaques were formed. Although the exact mechanism behind this effect remains to be explained, the retinoic acid differentiated SH-SY5Y cell in vitro model could serve as an alternative, environmentally driven model of neurodegenerative diseases, including Alzheimer's disease. [ABSTRACT FROM AUTHOR]

Background: Fluorescent proteins (FPs) are pivotal reagents for flow cytometry analysis or fluorescent microscopy. A new generation of immunoreagents (fluobodies/chromobodies) has been developed by fusing recombinant nanobodies to FPs. Methods: We analyzed the quality of such biomolecules by a combination of gel filtration and SDS-PAGE to identify artefacts due to aggregation or material degradation. Results: In the SDS-PAGE run, unexpected bands corresponding to separate fluobodies were evidenced and characterized as either degradation products or artefacts that systematically resulted in the presence of specific FPs and some experimental conditions. The elimination of N-terminal methionine from FPs did not impair the appearance of FP fragments, whereas the stability and migration characteristics of some FP constructs were strongly affected by heating in loading buffer, which is a step samples undergo before electrophoretic separation. Conclusions: In this work, we provide explanations for some odd results observed during the quality control of fluobodies and summarize practical suggestions for the choice of the most convenient FPs to fuse to antibody fragments. [ABSTRACT FROM AUTHOR]

Nanoparticle toxicity assessments have moved closer to physiological conditions while trying to avoid the use of animal models. An example of new in vitro exposure techniques developed is the exposure of cultured cells at the air–liquid interface (ALI), particularly in the case of respiratory airways. While the commercially available VITROCELL® Cloud System has been applied for the delivery of aerosolized substances to adherent cells under ALI conditions, it has not yet been tested on lung surfactant and semi-adherent cells such as alveolar macrophages, which are playing a pivotal role in the nanoparticle-induced immune response. Objectives: In this work, we developed a comprehensive methodology for coating semi-adherent lung cells cultured at the ALI with aerosolized surfactant and subsequent dose-controlled exposure to nanoparticles (NPs). This protocol is optimized for subsequent transcriptomic studies. Methods: Semi-adherent rat alveolar macrophages NR8383 were grown at the ALI and coated with lung surfactant through nebulization using the VITROCELL® Cloud 6 System before being exposed to TiO2 NM105 NPs. After NP exposures, RNA was extracted and its quantity and quality were measured. Results: The VITROCELL® Cloud system allowed for uniform and ultrathin coating of cells with aerosolized surfactant mimicking physiological conditions in the lung. While nebulization of 57 μL of 30 mg/mL TiO2 and 114 μL of 15 mg/mL TiO2 nanoparticles yielded identical cell delivered dose, the reproducibility of dose as well as the quality of RNA extracted were better for 114 μL.

Knowing the temperature distribution within the conducting walls of various multilayer-type materials is crucial for a better understanding of heat-transfer processes. This applies to many engineering fields, good examples being photovoltaics and microelectronics. In this work we present a novel fluorescence technique that makes possible the non-invasive imaging of local temperature distributions within a transparent, temperature-sensitive, co-doped Er:GPF1Yb0.5Er glass-ceramic with micrometer spatial resolution. The thermal imaging was performed with a high-resolution fluorescence microscopy system, measuring different focal planes along the z-axis. This ultimately enabled a precise axial reconstruction of the temperature distribution across a 500-µm-thick glass-ceramic sample. The experimental measurements showed good agreement with computer-modeled heat simulations and suggest that the technique could be adopted for the spatial analyses of local thermal processes within optically transparent materials. For instance, the technique could be used to measure the temperature distribution of intermediate, transparent layers of novel ultra-high-efficiency solar cells at the micron and sub-micron levels.

Legionella pneumophila can cause a potentially fatal form of humane pneumonia (Legionnaires' disease), which is most problematic in immunocompromised and in elderly people. Legionella species is present at low concentrations in soil, natural and artificial aquatic systems and is therefore constantly entering man-made water systems. The environment temperature for it's ideal growth range is between 32 and 42°C, thus hot water pipes represent ideal environment for spread of Legionella. The bacteria are dormant below 20°C and do not survive above 60°C. The primary method used to control the risk from Legionella is therefore water temperature control. There are several other effective treatments to prevent growth of Legionella in water systems, however current disinfection methods can be applied only intermittently thus allowing Legionella to grow in between treatments. Here we present an alternative disinfection method based on antibacterial coatings with Cu-TiO2 nanotubes deposited on preformed surfaces. In the experiment the microbiocidal efficiency of submicron coatings on polystyrene to the bacterium of the genus Legionella pneumophila with a potential use in a water supply system was tested. The treatment thus constantly prevents growth of Legionella pneumophila in presence of water at room temperature. Here we show that 24-hour illumination with low power UVA light source (15 W/m2 UVA illumination) of copper doped TiO2 nanotube coated surfaces is effective in preventing growth of Legionella pneumophila. Microbiocidal effects of Cu-TiO2 nanotube coatings were dependent on the flow of the medium and the intensity of UV-A light. It was determined that tested submicron coatings have microbiocidal effects specially in a non-flow or low-flow conditions, as in higher flow rates, probably to a greater possibility of Legionella pneumophila sedimentation on the coated polystyrene surfaces, meanwhile no significant differences among bacteria reduction was noted regarding to non or low flow of medium.

Uvod: Duhovnost v zdravstveni negi v svetu temelji na raziskavah, ki so podlaga za praktično delo medicinskih sester. Namen raziskave je bil ugotoviti število objavljene znanstvene literature na temo duhovnosti v zdravstveni negi v slovenskem prostoru in jo proučiti glede na raziskovalni pristop in vsebinsko tematiko. Metode: Uporabljen je bil pregled znanstvene literature, objavljene od 2005 do 2017 v podatkovni bazi COBIB.SI. Iskanje je potekalo s ključnimi besedami: »duhovnost«, »duhovna oskrba«, »celostni pristop«, »zdravstvena nega«, »paliativna oskrba«, »žalovanje«, »umiranje«, »duhovno zdravje«. Uporabljena je bila metoda analize vsebine. Rezultati: Izmed 367 identificiranih objav je bilo v končno analizo vključenih 11 znanstvenih del. Z metodo analize vsebine so bile identificirane tri kategorije: (1) razumevanje pojma duhovnosti in duhovne oskrbe ter pripisovanje njunega pomena za paciente; (2) zaznavanje duhovnih potreb pacientov in izvajanje prakse duhovne oskrbe; (3) predstavitev potencialov eksistencialno- fenomenološkega pristopa, ki poglabljajo samorazumevanje spremljevalca pri spremljanju in duhovni podpori pacientov in njihovih svojcev. Diskusija in zaključek: Zanimanje za obravnavano temo je v domačem prostoru prisotno. V znanstvenih objavah je duhovnost najpogosteje obravnavana na področju paliativne oskrbe in umiranja. Medicinske sestre imajo pomembno vlogo pri zaznavanju in opozarjanju na duhovne potrebe pacientov ter nudenju podpore.