Search

This study investigates using of high molecular weight hydrophilic polymers, hypromellose and hydroxypropylcellulose, for the preparation of sustained release matrix tablets containing high dose, highly soluble drug, tramadol HCl. Proportion of polymer, type of insoluble filler, proportion of tramadol HCl, amount of drug in the tablet and compression pressure were recognized as critical formulation and process parameters and their influence on drug release and tablet mechanical properties was evaluated. Tensile strength was used as indicator of mechanical properties of the tablets. Experiments were performed with utilization of compaction simulator as a device which simulates compaction profiles of large scale rotary tablet presses. In formulations with both polymers proportion of tramadol HCl was the most critical formulation parameter wherein increasing of the tramadol HCl proportion increased its release rate in early stages of drug release. Regarding the tablet mechanical characteristics, the influence of the filler type has the most pronounced effect in formulations with both polymers. Higher tensile strengths were obtained with Avicel PH 102 as filler in formulations with both HPMC and HPC. [Projekat Ministarstva nauke Republike Srbije, br. TR 34007]

This article presents the possibility of using of multiple regression analysis (MRA) and dynamic neural network (DNN) for prediction of stability of Hydrocortisone 100 mg (in a form of hydrocortisone sodium succinate) freeze-dried powder for injection packed into a dual chamber container. Degradation products of hydrocortisone sodium succinate: free hydrocortisone and related substances (impurities A, B, C, D and E; unspecified impurities and total impurities) were followed during stress and formal stability studies. All data obtained during stability studies were used for in silico modeling; multiple regression models and dynamic neural networks as well, in order to compare predicted and observed results. High values of coefficient of determination (0.950.99) were gained using MRA and DNN, so both methods are powerful tools for in silico stability studies, but superiority of DNN over mathematical modeling of degradation was also confirmed.

In order to achieve fast release of ibuprofen, slightly soluble model substance (0.52104 mol/l), surfactant systems for oral use with different PEG-40 hydrogenated castor oil (C)/diethylene glycol monoethyl ether (T) ratios were investigated. Comparison between dissolution profiles for ibuprofen from formulated systems and from two commercial products, film tablets and soft capsules, is presented in this paper. Photon correlation spectroscopy has shown that after high dilution with water, surfactant systems were able to form micellar solutions. The size of micelles varies from 14.8 ± 0,075 nm to 16.2 ± 0,021 nm with increasing C/T ratio from 1:2 to 2:1. Although with increasing content of PEG-40 hydrogenated castor oil larger micelles have formed, lower values of polydispersity index indicated that more homogeneous distribution of micelles size was gained. Conductometric analysis has demonstrated that system composing of C/T ratio 2:1, has shown most pronounced interaction between droplets, which can be seen as high rise of electrical conductivity with increasing water content (% (wwater/wtotal)) in the sample. No significant difference in percolation threshold between formulations with different C/T ratios was observed. Different surfactant systems were adsorbed on magnesium aluminometasilicate, as adsorbent with high specific active surface (≈300 m2/g), in order to investigate potential influence of adsorbent on ibuprofen dissolution rate. Formulated systems, with or without adsorbent were filled in hard gelatin capsules. The dissolution profiles of ibuprofen from different formulations were obtained in 30 minutes by dissolution apparatus with rotating baskets and compared with dissolution profiles of ibuprofen from commercial products. For formulations without adsorbent faster release of ibuprofen in first minutes of dissolution test, showed formulations with C/T ratio 2:1 and 1:1. Magnesium aluminometasilicate, as adsorbent with high specific surface area, significantly improved release rate of ibuprofen from formulation with C/T ratio 2:1, but, for formulation with C/T ratio 1:1, significantly lower release of ibuprofen was observed. Formulations with other C/T ratios in terms of fast ibuprofen release did not give satisfying results. Obtained results show that in comparison to dissolution profile of ibuprofen from commercial products proper C/T ratio as well as magnesium aluminometasilicate, as adsorbent with high specific surface area, can significantly increase release of ibuprofen.

Copyright of Chemical Industry / Hemijska Industrija is the property of Association of Chemical Engineers and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Chemical Industry / Hemijska Industrija is the property of Association of Chemical Engineers and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)