Search

Most tissues of the human body present hierarchical fibrillar extracellular matrices (ECMs) that have a strong influence over their physicochemical properties and biological behavior. Of great interest is the introduction of this fibrillar structure to hydrogels, particularly due to the water-rich composition, cytocompatibility, and tunable properties of this class of biomaterials. Here, the main bottom-up fabrication strategies for the design and production of hierarchical biomimetic fibrillar hydrogels and their most representative applications in the fields of tissue engineering and regenerative medicine are reviewed. For example, the controlled assembly/arrangement of peptides, polymeric micelles, cellulose nanoparticles (NPs), and magnetically responsive nanostructures, among others, into fibrillar hydrogels is discussed, as well as their potential use as fibrillar-like hydrogels (e.g., those from cellulose NPs) with key biofunctionalities such as electrical conductivity or remote stimulation. Finally, the major remaining barriers to the clinical translation of fibrillar hydrogels and potential future directions of research in this field are discussed., (© 2024 The Authors. Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

Designing functional, vascularized, human scale in vitro models with biomimetic architectures and multiple cell types is a highly promising strategy for both a better understanding of natural tissue/organ development stages to inspire regenerative medicine, and to test novel therapeutics on personalized microphysiological systems. Extrusion-based 3D bioprinting is an effective biofabrication technology to engineer living constructs with predefined geometries and cell patterns. However, bioprinting high-resolution multilayered structures with mechanically weak hydrogel bioinks is challenging. The advent of embedded 3D bioprinting systems in recent years offered new avenues to explore this technology for in vitro modeling. By providing a stable, cell-friendly and perfusable environment to hold the bioink during and after printing, it allows to recapitulate native tissues' architecture and function in a well-controlled manner. Besides enabling freeform bioprinting of constructs with complex spatial organization, support baths can further provide functional housing systems for their long-term in vitro maintenance and screening. This minireview summarizes the recent advances in this field and discuss the enormous potential of embedded 3D bioprinting technologies as alternatives for the automated fabrication of more biomimetic in vitro models.

In this study, poly(2-hydroxyethyl methacrylate) [p(HEMA)] based hydrogels responsive to the pH, temperature and magnetic field were synthesized. The surface properties of p(HEMA) were improved by designing the stimuli-responsive hydrogels made of MAGA, NIPAAm and methacrylate-decorated magnetite nanoparticles as a function of pH-, thermo- and magnetic responsive cell culture surfaces. These materials were then modified an abundant extracellular matrix component, type I collagen, which has been considered as a biorecognition element to increase the applicability of hydrogels to cell viability. Based on results from scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA), stimuli-responsive hydrogel demonstrated improved non-porous structures and thermal stability with a high degree of cross-linking. Mechanical analyses of the hydrogels also showed that stimuli-responsive hydrogels are more elastomeric due to the polymeric chains and heterogeneous amorphous segments compared to plain hydrogels. Furthermore, surface modification of hydrogels with collagen provided better biocompatibility, which was confirmed with L929 fibroblast cell adhesion. Produced stimuli-responsive hydrogels modulated cellular viability by changing pH and magnetic field., (© 2022 IOP Publishing Ltd.)

Low proliferation capacity of corneal endothelial cells (CECs) and worldwide limitations in transplantable donor tissues reveal the critical need of a robust approach for in vitro CEC growth. However, preservation of CEC-specific phenotype with increased proliferation has been a great challenge. Here we offer a biomimetic cell substrate design, by optimizing mechanical, topographical and biochemical characteristics of materials with CEC microenvironment. We showed the surprising similarity between topographical features of white rose petals and corneal endothelium due to hexagonal cell shapes and physiologically relevant cell density (≈ 2000 cells/mm 2 ). Polydimethylsiloxane (PDMS) substrates with replica of white rose petal topography and cornea-friendly Young's modulus (211.85 ± 74.9 kPa) were functionalized with two of the important corneal extracellular matrix (ECM) components, collagen IV (COL 4) and hyaluronic acid (HA). White rose petal patterned and COL 4 modified PDMS with optimized stiffness provided enhanced bovine CEC response with higher density monolayers and increased phenotypic marker expression. This biomimetic approach demonstrates a successful platform to improve in vitro cell substrate properties of PDMS for corneal applications, suggesting an alternative environment for CEC-based therapies, drug toxicity investigations, microfluidics and organ-on-chip applications., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Cardiomyocytes, differentiated from induced pluripotent stem cells (iPSCs), have the potential to produce patient- and disease-specific pharmacological and toxicological platforms, in addition to their cardiac cell therapy applications. However, the lack of both a robust and a simple procedure for scalable cell substrate production is one of the major limitations in this area. Mimicking the natural healthy myocardium extracellular matrix (ECM) properties by altering the cell substrate properties, such as stiffness and chemical/biochemical composition, can significantly affect cell substrate interfacial characteristics and potentially influence cellular behavior and differentiation of iPSCs to cardiomyocytes. Here, we propose a systematic and biomimetic approach, based on the preparation of poly(dimethylsiloxane) (PDMS) substrates having the similar stiffness as healthy heart tissue and a well-defined surface chemistry obtained by conventional [(3-aminopropyl)triethoxysilane (APTES) and octadecyltrimethoxysilane (OTS)] and amino acid (histidine and leucine)-conjugated self-assembled monolayers (SAMs). Among a wide range of different concentrations, the 50:1 prepolymer cross-linker ratio of PDMS allowed adaptation of the myocardium stiffness with a Young's modulus of 23.79 ± 0.61 kPa. Compared with conventional SAM modification, amino acid-conjugated SAMs greatly improved iPSC adhesion, viability, and cardiac marker expression by increasing surface biomimetic properties, whereas all SAMs enhanced cell behavior, with respect to native PDMS. Furthermore, leucine-conjugated SAM modification provided the best environment for cardiac differentiation of iPSCs. This optimized approach can be easily adapted for cardiac differentiation of iPSCs in vitro , rendering a very promising tool for microfluidics, drug screening, and organ-on-chip platforms.

Corneal endothelial cells (CECs) have limited proliferation ability leading to corneal endothelium (CE) dysfunction and eventually vision loss when cell number decreases below a critical level. Although transplantation is the main treatment method, donor shortage problem is a major bottleneck. The transplantation of in vitro developed endothelial cells with desirable density is a promising idea. Designing cell substrates that mimic the native CE microenvironment is a substantial step to achieve this goal. In the presented study, we prepared polyacrylamide (PA) cell substrates that have a microfabricated topography inspired by the dimensions of CECs. Hydrogel surfaces were prepared via two different designs with small and large patterns. Small patterned hydrogels have physiologically relevant hexagon densities (∼2000 hexagons/mm 2 ), whereas large patterned hydrogels have sparsely populated hexagons (∼400 hexagons/mm 2 ). These substrates have similar elastic modulus of native Descemet's membrane (DM; ∼50 kPa) and were modified with Collagen IV (Col IV) to have biochemical content similar to native DM. The behavior of bovine corneal endothelial cells on these substrates was investigated and results show that cell proliferation on small patterned substrates was significantly (p = 0.0004) higher than the large patterned substrates. Small patterned substrates enabled a more densely populated cell monolayer compared to other groups (p = 0.001 vs. flat and p < 0.0001 vs. large patterned substrates). These results suggest that generating bioinspired surface topographies augments the formation of CE monolayers with the desired cell density, addressing the in vitro development of CE layers., (© 2021 John Wiley & Sons Ltd.)

Polydimethylsiloxane (PDMS) is a biocompatible synthetic polymer and used in various applications due to its low toxicity and tunable surface properties. However, PDMS does not have any chemical cues for cell binding. Plasma treatment, protein coating or surface modification with various molecules have been used to improve its surface characteristics. Still, these techniques are either last for a very limited time or have very complicated experimental procedures. In the present study, simple and one-step surface modification of PDMS is successfully accomplished by the preparation of hydrophilic and hydrophobic amino acid conjugated self-assembled monolayers (SAMs) for enhanced interactions at the cell-substrate interface. Synthesis of histidine and leucine conjugated (3-aminopropyl)-triethoxysilane (His-APTES and Leu-APTES) were confirmed with proton nuclear magnetic resonance spectroscopy ( 1 H NMR) and optimum conditions for the modification of PDMS with SAMs were investigated by X-ray photoelectron spectroscopy (XPS) analysis, combined with water contact angle (WCA) measurements. Results indicated that both SAMs enhanced cellular behavior in vitro. Furthermore, hydrophilic His-APTES modification provides a superior environment for the osteoblast maturation with higher alkaline phosphatase activity and mineralization. As histidine, leucine, and functional groups of these SAMs are naturally found in biological systems, modification of PDMS with them increases its cell-substrate surface biomimetic properties. This study establishes a successful modification of PDMS for in vitro cell studies, offering a biomimetic and easy procedure for potential applications in microfluidics, cell-based therapies, or drug investigations., (Copyright © 2020 Elsevier B.V. All rights reserved.)