Search

Background: Azobenzene disperse dyes (azo DDs) are well-known as textile allergens, but the knowledge of their occurrence in garments is low. The numerous azo DDs and dye components found in textiles constitute a potential health risk, but only seven azo DDs are included in the European baseline patch test series (EBS). Objectives: To investigate non-regulated azo DDs and dye components in synthetic garments on the Swedish market. Methods: High-performance liquid chromatography/mass spectrometry, gas chromatography/mass spectrometry and computerized data mining. Results: Sixty-two azo DDs were detected, with Disperse Red 167:1 occurring in 67%, and 14 other DDs each found in >20% of the garments. Notably, the EBS dyes were less common, three even not detected, while arylamines were frequently detected and exceeded 1 mg/g in several garments. Also, halogenated dinitrobenzenes were identified in 25% of the textiles. Conclusion: Azo DDs and dye components, in complex compositions and with large variations, occurred frequently in the synthetic garments. The arylamines were shown to occur at much higher levels compared to the azo DDs, suggesting the former constitute a potentially higher health risk. The role of arylamines and halogenated dinitrobenzenes in textile allergy has to be further investigated.

The global manufacturing of clothing is usually composed of multistep processes, which include a large number of chemicals. However, there is generally no information regarding the chemical content remaining in the finished clothes. Clothes in close and prolonged skin contact may thus be a significant source of daily human exposure to hazardous compounds depending on their ability to migrate from the textiles and be absorbed by the skin. In the present study, twenty-four imported garments on the Swedish market were investigated with respect to their content of organic compounds, using a screening workflow. Reversed-phase liquid chromatography coupled to electrospray ionization/high-resolution mass spectrometry was used for both suspect and non-target screening. The most frequently detected compound was benzothiazole followed by quinoline. Nitroanilines with suspected mutagenic and possible skin sensitization properties, and quinoline, a carcinogenic compound, were among the compounds occurring at the highest concentrations. In some garments, the level of quinoline was estimated to be close to or higher than 50,000 ng/g, the limit set by the REACH regulation. Other detected compounds were acridine, benzotriazoles, benzothiazoles, phthalates, nitrophenols, and organophosphates. Several of the identified compounds have logP and molecular weight values enabling skin uptake. This pilot study indicates which chemicals and compound classes should be prioritized for future quantitative surveys and control of the chemical content in clothing as well as research on skin transfer, skin absorption, and systemic exposure. The results also show that the current control and prevention from chemicals in imported garments on the Swedish market is insufficient.

In two previous papers, the authors have shown that benzothiazole, benzotriazole, quinoline, and several of their derivatives are widespread in clothing textile articles. A number of these compounds exhibit allergenic and irritating properties and, due to their octanol-water partition coefficient, are prone to be absorbed by the skin. Moreover, they are slightly soluble in water, which could make washing of clothes a route of emission into the environment. In the present study, the washout effect of benzothiazole, benzotriazole, quinoline, and some of their derivatives has been investigated. Twenty-seven textile samples were analyzed before, as well as after five and ten times of washing. The most abundant analyte was found to be benzothiazole, which was detected in 85 % of the samples with an average concentration of 0.53 mu g/g (median 0.44 mu g/g), followed by quinoline, detected in 81 % of the samples with an average concentration of 2.42 mu g/g (median 0.21 mu g/g). The average decrease in concentration for benzothiazoles was 50 % after ten times washing, while it was around 20 % for quinolines. The average emission to household wastewater of benzothiazoles and quinolines during one washing (5 kg of clothes made from polyester materials) was calculated to 0.5 and 0.24 g, respectively. These results strongly indicate that laundering of clothing textiles can be an important source of release of these compounds to household wastewater and in the end to aquatic environments. It also demonstrates a potential source of human exposure to these chemicals since considerable amounts of the compounds remain in the clothes even after ten times of washing.

In this study, the occurrence of nine phthalate diesters (phthalates) and 14 organophosphorus flame retardants (PFRs) was investigated in 62 house dust samples collected from 19 buildings in Stockholm area during the year 2008. Eight phthalates were detected in almost all samples, with median concentrations ranging from 0.47 mu g/g to 449 mu g/g with di(2-ethylhexyl)phthalate being the most abundant compound. Twelve PFRs were detected with median concentrations ranging from 0.19 mu g/g to 11 mu g/g. Within this class of compounds, the most abundant were tris(2-chloroisopropyl) and tris(2-butoxyethyl) phosphate. Both classes of compounds were also measured in the air of the apartments, but no correlation between air and dust concentrations could be found. Based on these measurements, exposure, via house dust ingestion and air inhalation, was calculated for adults and toddlers, and compared to published limit values in order to estimate potential health risks. In an extreme exposure scenario for toddlers, di(2-ethylhexyl) phthalate, tris (2-chloroethyl) phosphate, tris(2-butoxyethyl) phosphate, and tributyl phosphate were close to the reference dose for chronic oral exposure or the tolerable daily intake. Standard Reference Material SRM 2585 was used as a quality control sample, and the levels of diisononyl and diisodecyl phthalates were determined in this material.

A high performance liquid chromatography–tandem mass spectrometry method utilizing electrospray ionization in positive and negative mode has been developed for the separation and detection of benzothiazole and benzotriazole derivates. Ultra-sonication assisted solvent extraction of these compounds has also been developed and the overall method demonstrated on a selected clothing textile and an automobile tire sample. Matrix effects and extraction recoveries, as well as linearity and limits of detection have been evaluated. The calibration curves spanned over more than two orders of magnitude with coefficients of correlation R2 > 0.99 and the limits of detection and the limits of quantification were in the range 1.7–58 pg injected and 18–140 pg/g, respectively. The extraction recoveries ranged between 69% and 102% and the matrix effects between 75% and 101%. Benzothiazole and benzotriazole derivates were determined in the textile sample and benzothiazole derivatives determined in the tire sample with good analytical performance.

A number of studies have indicated that bacteria able to emit red fluorescence can be detected by light in-duced fluorescence technique and killed by photody-namic therapy. The objective of this study was to in-vestigate the red fluorescence properties of the single gram negative capnophilic bacterium Aggregatibacter actinomycetemcomitans, ATCC 33384, and to investi-gate if these properties were related to the growth, morphology and size of the bacterial colonies. Time trend assessment was made with red fluorescence by QLF (Quantitative Light-induced Fluorescence), as well as with white light digital imaging. It was dem-onstrated that A. actinomycetemcomitans, a single cap-nophilic bacterium, is able to produce red fluores-cence on its own, i.e. in the absence of other bacteria strains, and that blood agar is necessary to obtain red fluorescence from this bacterium on culture plates. This bacterium formed smooth circular, bell/dome like colonies increasing in size with time exhibiting various red fluorescence behaviors. A large variation in the fluorescence behavior points out an inhomoge-neous distribution of red fluorescence within and be-tween the colonies, i.e. the size of the investigated colonies did not correlate with the red fluorescence area, suggesting a dependence on the colony mor-phology such as the colony growth in height. To our knowledge this is the first study that have shown that A. actinomycetemcomitans on its own is able to pro-duce fluorescence in the red spectral region.

This paper reports the abundance in indoor air and dust of eleven organophosphate esters and six phthalate esters. Both groups of these semi-volatile compounds are widely incorporated as additives into plastic materials used in the indoor environment, thus contributing to indoor exposure to industrial chemicals. Thirty sampling sites representing three different indoor environments (private homes, day care centers, and workplaces) in the Stockholm area, Sweden, were selected to obtain representative concentration profiles in both ambient air and settled dust. Eight of the target organophosphate esters and all six phthalate esters were found in both air and dust samples at all locations. The phthalate esters were more abundant than the organophosphate esters, typically ten times higher total concentrations. Especially interesting were the high levels of tributoxyethyl phosphate in the day care centers, the relatively high levels of chlorinated organophosphate esters in the air of workplaces and the overall high levels of diethylhexyl phthalate in dust. The air concentration profiles of the phosphate esters differed significantly between the three indoor environments, whereas the concentration profiles of the phthalate esters as well as their total concentrations were similar. The correlation between concentrations found in air and in dust was found to be weak.

An extensive study has been conducted of the prevalence of organophosphorous flame retardants/plasticizers and phthalate ester plasticizers in indoor air. The targeted substances were measured in 45 multi-storey apartment buildings in Stockholm, Sweden. The apartment buildings were classified as high or low risk with regard to the reporting of sick building symptoms (SBS) within the project Healthy Sustainable Houses in Stockholm (3H). Air samples were taken from two to four apartments per building (in total 169 apartments) to facilitate comparison within and between buildings. Association with building characteristics have been examined as well as association with specific sources by combining chemical analysis and exploratory uni- and multivariate data analysis. The study contributes to the overall perspective of levels of organophosphate and phthalate ester in indoor air enabling comparison with other studies. The results indicated little or no difference in the concentrations of the target substances between the two risk classifications of the buildings. The differences between the apartments sampled within (inter) buildings were greater than the differences between (intra) buildings. The concentrations measured in air ranged up to 1,200 ng/m3 for organophosphate esters and up to 11,000 ng/m3 for phthalate esters. Results in terms of sources were discerned e.g. PVC flooring is a major source of benzylbutyl phthalate in indoor air.

This review underlines the importance of indoor contamination as a pathway of human exposure to hexabromocyclododecanes (HBCDs), polybrominated diphenyl ethers (PBDEs), and perfluoroalkyl compounds (PFCs). There is ample evidence of substantial contamination of indoor dust with these chemicals and that their concentrations in indoor air exceed substantially those outdoors. Studies examining the relationship between body burden and exposure via indoor dust are inconsistent while some indicate a link between body burdens and PBDE and HBCD exposure via dust ingestion, others find no correlation. Likewise, while concentrations in indoor dust and human tissues are both highly skewed, this does not necessarily imply causality. Evidence suggests exposure via dust ingestion is higher for toddlers than adults. Research priorities include identifying means of reducing indoor concentrations and indoor monitoring methods that provide the most ""biologically-relevant"" measures of exposure as well as monitoring a wider range of microenvironment categories. Other gaps include studies to improve understanding of the following: emission rates and mechanisms via which these contaminants migrate from products into indoor air and dust; relationships between indoor exposures and human body burdens; relevant physicochemical properties; the gastrointestinal uptake by humans of these chemicals from indoor dust; and human dust ingestion rates., authorCount :16

A selective and sensitive method for the simultaneous determination of 14 organophosphate and six phthalate esters using gas chromatography (GC) and mass spectrometry (MS) is presented. Both of these compound classes are frequently found in the indoor environment due to their use as bulk additives in numerous polymers, consumer products and building materials. GC/MS utilizing positive ion chemical ionisation (PICI) in selected reaction monitoring (SRM) mode with isobutane as the reagent gas was found to be the best of the tested methods; it proved superior to electron ionisation (EI) in selected ion monitoring (SIM) mode and to PICI using methane as the reagent gas. The method was applied to indoor air samples collected by active air sampling using solid-phase extraction (SPE) cartridges. Organophosphates and phthalates were simultaneously determined with method detection limits (MDLs) in the range of 0.1-47 ng m(-3). For most compounds the MDLs were <= 0.2 ng m(-3), but due to the presence of some of these ubiquitous indoor air pollutants in the blanks, significantly higher MDLs were observed for a few compounds. Finally, the method was also applied in the screening of a much more complex sample matrix, indoor dust., authorCount :3

Part of urn:nbn:se:su:diva-367

Part of urn:nbn:se:su:diva-367

Part of urn:nbn:se:su:diva-367

Part of urn:nbn:se:su:diva-367

Part of urn:nbn:se:su:diva-318

The exhaust from a two-stroke chain saw engine was characterized using two different types of gasoline, aliphatic gasoline and conventional lead-free gasoline, in combination with four lubricants differing in mineral oil, polyolester, and polyisobutylene (PIB) content. This characterization was focused on emissions of polycyclic aromatic hydrocarbons (PAH) and mutagenicity testing using Ames Salmonella assay. In addition, exhaust emissions of carbon monoxide (CO), nitrogen oxides (NOx), aldehydes, and hydrocarbons (HC) were measured. The two-stroke engine was tested in a test bench, and particulate, semivolatile, and gaseous exhaust components were sampled using a dilution tunnel. Much less PAH were emitted when using aliphatic gasoline due to a much lower gasoline content of PAH and aromatics than the conventional gasoline. Also about half the NOx emissions, up to 50% higher formaldehyde and acetaldehyde emissions, and 10% higher total HC emissions were observed for the aliphatic gasoline. The influence of lubricant on the studied exhaust emissions was found to be of minor importance. In terms of mutagenicity, significant effects were seen for six of the eight gasoline/lubricant combinations, and the highest effects were observed without a metabolizing system. Generally, the conventional gasoline gave higher effects than did the aliphatic gasoline. A difference between lubricants was also seen, especially in combination with gasoline A; however, the interpretation of mutagenic effects of the lubricants was not straightforward. Overall, one synthetic ester-based lubricant and one mineral oil-based lubricant gave the highest mutagenicity.

Part of urn:nbn:se:su:diva-367