Search

Large language models (LLMs) hold significant promise in advancing network management and orchestration in 6G and beyond networks. However, existing LLMs are limited in domain-specific knowledge and their ability to handle multi-modal sensory data, which is critical for real-time situational awareness in dynamic wireless environments. This paper addresses this gap by introducing ENWAR, an ENvironment-aWARe retrieval augmented generation-empowered multi-modal LLM framework. ENWAR seamlessly integrates multi-modal sensory inputs to perceive, interpret, and cognitively process complex wireless environments to provide human-interpretable situational awareness. ENWAR is evaluated on the GPS, LiDAR, and camera modality combinations of DeepSense6G dataset with state-of-the-art LLMs such as Mistral-7b/8x7b and LLaMa3.1-8/70/405b. Compared to general and often superficial environmental descriptions of these vanilla LLMs, ENWAR delivers richer spatial analysis, accurately identifies positions, analyzes obstacles, and assesses line-of-sight between vehicles. Results show that ENWAR achieves key performance indicators of up to 70% relevancy, 55% context recall, 80% correctness, and 86% faithfulness, demonstrating its efficacy in multi-modal perception and interpretation.

Integrated sensing and communications (ISAC) has emerged as a means to efficiently utilize spectrum and thereby save cost and power. At the higher end of the spectrum, ISAC systems operate at wideband using large antenna arrays to meet the stringent demands for high-resolution sensing and enhanced communications capacity. However, the wideband implementation entails beam-squint, that is, deviations in the generated beam directions because of the narrowband assumption in the analog components. This causes significant degradation in the communications capacity, target detection, and parameter estimation. This article presents the design challenges caused by beam-squint and its mitigation in ISAC systems. In this context, we also discuss several ISAC design perspectives including far-/near-field beamforming, channel/direction estimation, sparse array design, and index modulation. There are also several research opportunities in waveform design, beam training, and array processing to adequately address beam-squint in ISAC., Comment: Accepted Paper in IEEE Communications Magazine

The majority of data-driven wireless research leans heavily on discriminative AI (DAI) that requires vast real-world datasets. Unlike the DAI, Generative AI (GenAI) pertains to generative models (GMs) capable of discerning the underlying data distribution, patterns, and features of the input data. This makes GenAI a crucial asset in wireless domain wherein real-world data is often scarce, incomplete, costly to acquire, and hard to model or comprehend. With these appealing attributes, GenAI can replace or supplement DAI methods in various capacities. Accordingly, this combined tutorial-survey paper commences with preliminaries of 6G and wireless intelligence by outlining candidate 6G applications and services, presenting a taxonomy of state-of-the-art DAI models, exemplifying prominent DAI use cases, and elucidating the multifaceted ways through which GenAI enhances DAI. Subsequently, we present a tutorial on GMs by spotlighting seminal examples such as generative adversarial networks, variational autoencoders, flow-based GMs, diffusion-based GMs, generative transformers, large language models, to name a few. Contrary to the prevailing belief that GenAI is a nascent trend, our exhaustive review of approximately 120 technical papers demonstrates the scope of research across core wireless research areas, including physical layer design; network optimization, organization, and management; network traffic analytics; cross-layer network security; and localization & positioning. Furthermore, we outline the central role of GMs in pioneering areas of 6G network research, including semantic/THz/near-field communications, ISAC, extremely large antenna arrays, digital twins, AI-generated content services, mobile edge computing and edge AI, adversarial ML, and trustworthy AI. Lastly, we shed light on the multifarious challenges ahead, suggesting potential strategies and promising remedies.

A joint design of both sensing and communication can lead to substantial enhancement for both subsystems in terms of size, cost as well as spectrum and hardware efficiency. In the last decade, integrated sensing and communications (ISAC) has emerged as a means to efficiently utilize the spectrum on a single and shared hardware platform. Recent studies focused on developing multi-function approaches to share the spectrum between radar sensing and communications. Index modulation (IM) is one particular approach to incorporate information-bearing communication symbols into the emitted radar waveforms. While IM has been well investigated in communications-only systems, the implementation adoption of IM concept in ISAC has recently attracted researchers to achieve improved energy/spectral efficiency while maintaining satisfactory radar sensing performance. This article focuses on recent studies on IM-ISAC, and presents in detail the analytical background and relevance of the major IM-ISAC applications., Comment: Accepted Paper in IEEE Signal Processing Magazine, 12pages5figures

Terahertz (THz) band is envisioned for the future sixth generation wireless systems thanks to its abundant bandwidth and very narrow beamwidth. These features are one of the key enabling factors for high resolution sensing with milli-degree level direction-of-arrival (DOA) estimation. Therefore, this paper investigates the DOA estimation problem in THz systems in the presence of two major error sources: 1) gain-phase mismatches, which occur due to the deviations in the radio-frequency circuitry; 2) beam-squint, which is caused because of the deviations in the generated beams at different subcarriers due to ultra-wide bandwidth. An auto-calibration approach, namely NoisE subspAce correcTion technique for MUltiple SIgnal Classification (NEAT-MUSIC), is proposed based on the correction of the noise subspace for accurate DOA estimation in the presence of gain-phase mismatches and beam-squint. To gauge the performance of the proposed approach, the Cramer-Rao bounds are also derived. Numerical results show the effectiveness of the proposed approach., Comment: Accepted paper in IEEE Wireless Communications Letters. arXiv admin note: text overlap with arXiv:2310.16724

Terahertz (THz) band communications and integrated sensing and communications (ISAC) are two main facets of the sixth generation wireless networks. In order to compensate the severe attenuation, the THz wireless systems employ large arrays, wherein the near-field beam-squint severely degrades the beamforming accuracy. Contrary to prior works that examine only either narrowband ISAC beamforming or far-field models, we introduce an alternating optimization technique for hybrid beamforming design in near-field THz-ISAC scenario. We also propose an efficient approach to compensate near-field beam-squint via baseband beamformers. Via numerical simulations, we show that the proposed approach achieves satisfactory spectral efficiency performance while accurately estimating the near-field beamformers and mitigating the beam-squint without additional hardware components., Comment: Accepted Paper in 2023 IEEE Global Communications Conference (GLOBECOM), Kuala Lumpur, Malaysia, 2023. arXiv admin note: text overlap with arXiv:2303.12328

Next-generation wireless networks strive for higher communication rates, ultra-low latency, seamless connectivity, and high-resolution sensing capabilities. To meet these demands, terahertz (THz)-band signal processing is envisioned as a key technology offering wide bandwidth and sub-millimeter wavelength. Furthermore, THz integrated sensing and communications (ISAC) paradigm has emerged jointly access spectrum and reduced hardware costs through a unified platform. To address the challenges in THz propagation, THz-ISAC systems employ extremely large antenna arrays to improve the beamforming gain for communications with high data rates and sensing with high resolution. However, the cost and power consumption of implementing fully digital beamformers are prohibitive. While hybrid analog/digital beamforming can be a potential solution, the use of subcarrier-independent analog beamformers leads to the beam-squint phenomenon where different subcarriers observe distinct directions because of adopting the same analog beamformer across all subcarriers. In this paper, we develop a sparse array architecture for THz-ISAC with hybrid beamforming to provide a cost-effective solution. We analyze the antenna selection problem under beam-squint influence and introduce a manifold optimization approach for hybrid beamforming design. To reduce computational and memory costs, we propose novel algorithms leveraging grouped subarrays, quantized performance metrics, and sequential optimization. These approaches yield a significant reduction in the number of possible subarray configurations, which enables us to devise a neural network with classification model to accurately perform antenna selection., Comment: 14pages10figures, submitted to IEEE

As the demand for wireless connectivity continues to soar, the fifth generation and beyond wireless networks are exploring new ways to efficiently utilize the wireless spectrum and reduce hardware costs. One such approach is the integration of sensing and communications (ISAC) paradigms to jointly access the spectrum. Recent ISAC studies have focused on upper millimeter-wave and low terahertz bands to exploit ultrawide bandwidths. At these frequencies, hybrid beamformers that employ fewer radio-frequency chains are employed to offset expensive hardware but at the cost of lower multiplexing gains. Wideband hybrid beamforming also suffers from the beam-split effect arising from the subcarrier-independent (SI) analog beamformers. To overcome these limitations, this paper introduces a spatial path index modulation (SPIM) ISAC architecture, which transmits additional information bits via modulating the spatial paths between the base station and communications users. We design the SPIM-ISAC beamformers by first estimating both radar and communications parameters by developing beam-split-aware algorithms. Then, we propose to employ a family of hybrid beamforming techniques such as hybrid, SI, and subcarrier-dependent analog-only, and beam-split-aware beamformers. Numerical experiments demonstrate that the proposed SPIM-ISAC approach exhibits significantly improved spectral efficiency performance in the presence of beam-split than that of even fully digital non-SPIM beamformers., Comment: Accepted Paper in IEEE Transactions on Wireless Communications

Reconfigurable intelligent surfaces (RISs) have sparked a renewed interest in the research community envisioning future wireless communication networks. In this study, we analyzed the performance of RIS-enabled non-orthogonal multiple access (NOMA) based device-to-device (D2D) wireless communication system, where the RIS is partitioned to serve a pair of D2D users. Specifically, closed-form expressions are derived for the upper and lower limits of spectral efficiency (SE) and energy efficiency (EE). In addition, the performance of the proposed NOMA-based system is also compared with its orthogonal counterpart. Extensive simulation is done to corroborate the analytical findings. The results demonstrate that RIS highly enhances the performance of a NOMA-based D2D network., Comment: Accepted for Publication in the Proceedings of IEEE VTC-Fall 2022, 5 Pages, 4 Figures

To efficiently utilize the wireless spectrum and save hardware costs, the fifth generation and beyond (B5G) wireless networks envisage integrated sensing and communications (ISAC) paradigms to jointly access the spectrum. In B5G systems, the expensive hardware is usually avoided by employing hybrid beamformers that employ fewer radio-frequency chains but at the cost of the multiplexing gain. Recently, it has been proposed to overcome this shortcoming of millimeter wave (mmWave) hybrid beamformers through spatial path index modulation (SPIM), which modulates the spatial paths between the base station and users and improves spectral efficiency. In this paper, we propose an SPIM-ISAC approach for hybrid beamforming to simultaneously generate beams toward both radar targets and communications users. We introduce a low complexity approach for the design of hybrid beamformers, which include radar-only and communications-only beamformers. Numerical experiments demonstrate that our SPIM-ISAC approach exhibits a significant performance improvement over the conventional mmWave-ISAC design in terms of spectral efficiency and the generated beampattern., Comment: Accepted paper in 2023 IEEE Radar Conference

Innovative reconfigurable intelligent surface (RIS) technologies are rising and recognized as promising candidates to enhance 6G and beyond wireless communication systems. RISs acquire the ability to manipulate electromagnetic signals, thus, offering a degree of control over the wireless channel and the potential for many more benefits. Furthermore, active RIS designs have recently been introduced to combat the critical double fading problem and other impairments passive RIS designs may possess. In this paper, the potential and flexibility of active RIS technology are exploited for uplink systems to achieve virtual non-orthogonal multiple access (NOMA) through power disparity over-the-air rather than controlling transmit powers at the user side. Specifically, users with identical transmit power, path loss, and distance can communicate with a base station sharing time and frequency resources in a NOMA fashion with the aid of the proposed hybrid RIS system. Here, the RIS is partitioned into active and passive parts and the distinctive partitions serve different users aligning their phases accordingly while introducing a power difference to the users' signals to enable NOMA. First, the end-to-end system model is presented considering two users. Furthermore, outage probability calculations and theoretical error probability analysis are discussed and reinforced with computer simulation results.

This paper introduces a reconfigurable intelligent surface (RIS)-assisted grant-free non-orthogonal multiple-access (GF-NOMA) scheme. To ensure the power reception disparity required by the power domain NOMA (PD-NOMA), we propose a joint user clustering and RIS assignment/alignment approach that maximizes the network sum rate by judiciously pairing user equipments (UEs) with distinct channel gains, assigning RISs to proper clusters, and aligning RIS phase shifts to the cluster members yielding the highest cluster sum rate. Once UEs are acknowledged with the cluster index, they are allowed to access their resource blocks (RBs) at any time requiring neither further grant acquisitions from the base station (BS) nor power control as all UEs are requested to transmit at the same power. In this way, the proposed approach performs an implicit over-the-air power control with minimal control signaling between BS and UEs, which has shown to deliver up to 20% higher network sum rate than benchmark GF-NOMA and optimal grant-based PD-NOMA schemes depending on the network parameters. The given numerical results also investigate the impact of UE density, RIS deployment, and RIS hardware specifications on the overall performance of the proposed RIS-aided GF-NOMA scheme.

Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems typically employ hybrid mixed signal processing to avoid expensive hardware and high training overheads. {However, the lack of fully digital beamforming at mmWave bands imposes additional challenges in channel estimation. Prior art on hybrid architectures has mainly focused on greedy optimization algorithms to estimate frequency-flat narrowband mmWave channels, despite the fact that in practice, the large bandwidth associated with mmWave channels results in frequency-selective channels. In this paper, we consider a frequency-selective wideband mmWave system and propose two deep learning (DL) compressive sensing (CS) based algorithms for channel estimation.} The proposed algorithms learn critical apriori information from training data to provide highly accurate channel estimates with low training overhead. In the first approach, a DL-CS based algorithm simultaneously estimates the channel supports in the frequency domain, which are then used for channel reconstruction. The second approach exploits the estimated supports to apply a low-complexity multi-resolution fine-tuning method to further enhance the estimation performance. Simulation results demonstrate that the proposed DL-based schemes significantly outperform conventional orthogonal matching pursuit (OMP) techniques in terms of the normalized mean-squared error (NMSE), computational complexity, and spectral efficiency, particularly in the low signal-to-noise ratio regime. When compared to OMP approaches that achieve an NMSE gap of \$\unit[\{4-10\}]{dB}\$ with respect to the Cramer Rao Lower Bound (CRLB), the proposed algorithms reduce the CRLB gap to only \$\unit[\{1-1.5\}]{dB}\$, while significantly reducing complexity by two orders of magnitude., Comment: 16 pages, 8 figures, submitted to IEEE transactions on wireless communications. arXiv admin note: text overlap with arXiv:1704.08572 by other authors

Cooperative and cognitive non-orthogonal multiple access (CCR-NOMA) has been recognized as a promising technique to overcome issues of spectrum scarcity and support massive connectivity envisioned in next-generation wireless networks. In this paper, we investigate the deployment of an unmanned aerial vehicle (UAV) as a relay that fairly serves a large number of secondary users in a hot-spot region. The UAV deployment algorithm must jointly account for user clustering, channel assignment, and resource allocation sub-problems. We propose a solution methodology that obtains user clustering and channel assignment based on the optimal resource allocations for a given UAV location. To this end, we derive closed-form optimal power and time allocations and show it delivers optimal max-min fair throughput by consuming less energy and time than geometric programming. Based on optimal resource allocation, the optimal coverage probability is also provided in closed-form, which takes channel estimation errors, hardware impairments, and primary network interference into account. The optimal coverage probabilities are used by the proposed max-min fair user clustering and channel assignment approaches. The results show that the proposed method achieves 100% accuracy in more than five orders of magnitude less time than the optimal benchmark.

The conflation of cognitive radio (CR) and nonorthogonal multiple access (NOMA) concepts is a promising approach to fulfil the massive connectivity goals of future networks given the spectrum scarcity. Accordingly, this letter investigates the outage performance of imperfect cooperative CR-NOMA networks under hardware impairments and interference. Our analysis is involved with the derivation of the end-to-end outage probability (OP) for secondary NOMA users by accounting for imperfect channel state information (CSI), as well as the residual interference caused by successive interference cancellation (SIC) errors and coexisting primary/secondary users. The numerical results validated by Monte Carlo simulations show that CR-NOMA network provides a superior outage performance over orthogonal multiple access. As imperfections become more significant, CR-NOMA is observed to deliver relatively poor outage performance., Comment: 5 pages, 4 figures

Unmanned aerial vehicle (UAV) assisted cellular communication is gaining significant interest recently. Although it offers several advantages over terrestrial communication, UAV communication suffers from two main shortcomings. The typical untethered UAV (uUAV) has a limited battery power supply and therefore limited flying time, and it needs an extra wireless backhaul link to connect users to the core network. In this paper, we propose the utilization of the tethered UAV (tUAV) to assist the cellular network, where the tether provides power supply and connects the tUAV to the core network through high capacity link. The tUAV however has a limited mobility due to the limited tether length. A stochastic geometry-based analysis is provided for the coverage probability of an UAV-assisted cellular network where the mobile users located within a circular hot-spot. For that setup, we analyze and compare two scenarios: (i) utilizing uUAV and (ii) utilizing tUAV, for offloading the terrestrial base station (TBS). We capture the aforementioned limitations of each of the uUAV and the tUAV in our analysis. A novel user association analysis is provided given the TBS and the UAV locations. Next, we study the optimal locations of the uUAV and the tUAV to maximize the coverage probability. Multiple useful insights are revealed. For instance, numerical results show that tUAVs outperform uUAVs when the tether length is above 75 m, given that the uUAV is available for 80% of the time due to its battery limitations., Comment: Accepted at the IEEE Transaction on Wireless Communications

Internet of underwater things (IoUT) is a technological revolution that could mark a new era for scientific, industrial, and military underwater applications. To mitigate the hostile underwater channel characteristics, this paper hybridizes underwater acoustic and optical wireless communications to achieve a ubiquitous control and high-speed low-latency networking performance, respectively. Since underwater optical wireless communications (UOWC) suffers from limited range, it requires effective multi-hop routing solutions. In this regard, we propose a Sector-based Opportunistic Routing (SectOR) protocol. Unlike the traditional routing (TR) techniques which unicast packets to a unique relay, opportunistic routing (OR) targets a set of candidate relays by leveraging the broadcast nature of the UOWC channel. OR improves the packet delivery ratio as the likelihood of having at least one successful packet reception is much higher than that in conventional unicast routing. Contingent upon the performance characterization of a single-hop link, we obtain a variety of local and global metrics to evaluate the fitness of a candidate set (CS) and prioritize the members of a CS. Since rate-error and range-beamwidth tradeoffs yield different candidate set diversities, we develop a candidate filtering and searching algorithm to find the optimal sector-shaped coverage region by scanning the feasible search space. Moreover, a hybrid acoustic/optic coordination mechanism is considered to avoid duplicate transmission of the relays. Numerical results show that SectOR protocol can perform even better than an optimal unicast routing protocol in well-connected UOWNs.

The classical approach of avoiding or ignoring interference in wireless networks cannot accommodate the ambitious quality-of-service demands of ultra-dense cellular networks (CNs). However, recent ground-breaking information-theoretic advances changed our perception of interference from a foe to a friend. This paper aims to shed light on harnessing the benefits of integrating modern interference management (IM) schemes into future CNs. To this end, we envision a hybrid multiple access (HMA) scheme that decomposes the network into sub-topologies of potential IM schemes for more efficient utilization of network resources. Preliminary results show that HMA can multiply non-orthogonal multiple access performance, especially under dense user deployment.

Localization accuracy is of paramount importance for the proper operation of underwater optical wireless sensor networks (UOWSNs). However, underwater localization is prone to hostile environmental impediments such as drifts due to the surface and deep currents. These cause uncertainty in the deployed anchor node positions and pose daunting challenges to achieve accurate location estimations. Therefore, this paper analyzes the performance of three-dimensional (3D) localization for UOWSNs and derive a closed-form expression for the Cramer Rao lower bound (CRLB) by using time of arrival (ToA) and angle of arrival (AoA) measurements under the presence of uncertainty in anchor node positions. Numerical results validate the analytical findings by comparing the localization accuracy in scenarios with and without anchor nodes position uncertainty. Results are also compared with the linear least square (LSS) method and weighted LLS (WLSS) method.

LightFDG is an integrated approach to flow detection (FD) and flow grooming (FG) in optical wireless data center networks (DCNs), which is interconnected via wavelength division multiplexing (WDM) based free-space optical (FSO) links. Since forwarding bandwidth-hungry elephant flows (EFs) and delay-sensitive mice flows (MFs) on the same path can cause severe performance degradation, the LightFDG optically grooms flows of each class into rack-to-rack (R2R) flows. Then, R2R-MF and R2R-EF flows are separately forwarded over lightpaths of separate MF and EF virtual topologies, respectively. Lightpaths are provisioned by jointly determining the capacity and route based on flows' arrival rate, size, and completion time request. To prevent EFs from congesting the MF lightpaths, high speed and accurate flow-detection mechanisms are also necessary for classifying EFs as soon as possible. Therefore, a fast-lightweight-and-accurate flow detection framework is developed by leveraging the transmission control protocol (TCP) behaviors. The proposed FD scheme has the flexibility of being implemented as in-network or centralized to classify flows of modifiable and unmodifiable hosts, respectively. Since the centralized scheme incurs considerable overhead, the processing and communication overhead is also mitigated by proposed techniques. Numerical results show that LightFDG outperforms traditional load balancers by about 3x for EFs and 10x for MFs. Along with the developed overhead mitigation methods, the centralized scheme is shown to provide up to 62x lower overhead with 100% accuracy and with about 224x higher detection speeds than the existing centralized solutions., Comment: IEEE Transactions on Network and Service Management 2020

In this paper, we envision a hybrid opto-acoustic network design for the internet of underwater things (IoUT). Software-defined underwater networking (SDUN) is presented as an enabler of hybridizing benefits of optic and acoustic systems and adapting IoUT nodes to the challenging and dynamically changing underwater environment. We explain inextricably interwoven relations among functionalities of different layers and analyze their impacts on key network attributes. Network function virtualization (NFV) concept is then introduced to realize application specific cross-layer protocol suites through an NFV management and orchestration system. We finally discuss how SDUN and NFV can slice available network resources as per the diverging service demands of different underwater applications. Such a revolutionary architectural paradigm shift is not only a cure for chronicle underwater networking problems but also a way of smoothly integrating IoUT and IoT ecosystems., Comment: Submitted to IEEE Communications Magazine

In this paper, we propose a distributed cluster formation (CF) and resource allocation (RA) framework for non-ideal non-orthogonal multiple access (NOMA) schemes in heterogeneous networks. The imperfection of the underlying NOMA scheme is due to the receiver sensitivity and interference residue from non-ideal successive interference cancellation (SIC), which is generally characterized by a fractional error factor (FEF). Our analytical findings first show that several factors have a significant impact on the achievable NOMA gain. Then, we investigate fundamental limits on NOMA cluster size as a function of FEF levels, cluster bandwidth, and quality of service (QoS) demands of user equipments (UEs). Thereafter, a clustering algorithm is developed by taking feasible cluster size and channel gain disparity of UEs into account. Finally, we develop a distributed alpha-fair RA framework where alpha governs the trade-off between maximum throughput and proportional fairness objectives. Based on the derived closed-form optimal power levels, the proposed distributed solution iteratively updates bandwidths, clusters, and UEs' transmission powers. Numerical results demonstrate that proposed solutions deliver a higher spectral and energy efficiency than traditionally adopted basic NOMA cluster size of two. We also show that an imperfect NOMA cannot always provide better performance than orthogonal multiple access under certain conditions. Finally, our numerical investigations reveal that NOMA gain is maximized under downlink/uplink decoupled (DUDe) UE association.

This paper proposes a received signal strength (RSS) based localization framework for energy harvesting underwater optical wireless sensor networks (EH-UOWSNs), where the optical noise sources and channel impairments of seawater pose significant challenges on range estimation. In UOWSNs energy limitation is another major problem due to the limited battery power and difficulty to replace or recharge the battery of an underwater sensor node. In the proposed framework, sensor nodes with insufficient battery harvest ambient energy and start communicating once they have sufficient storage of energy. Network localization is carried out by measuring the RSSs of active nodes, which are modeled based on the underwater optical communication channel characteristics. Thereafter, block kernel matrices are computed for RSS-based range measurements. Unlike the traditional shortest-path approach, the proposed technique reduces the estimation error of the shortest path for each block kernel matrix. Once the complete block kernel matrices are available, a closed form localization technique is developed to find the location of every optical sensor node in the network. An analytical expression for the Cramer Rao lower bound (CRLB) is also derived as a benchmark to evaluate the localization performance of the developed technique. Extensive simulations show that the proposed framework outperforms the well-known network localization techniques., Comment: Accepted in IEEE Transactions on Wireless Communications

On the contrary of low speed and high delay acoustic systems, underwater optical wireless communication (UOWC) can deliver a high speed and low latency service at the expense of short communication ranges. Therefore, multihop communication is of utmost importance to improve degree of connectivity and overall performance of underwater optical wireless networks (UOWNs). In this regard, this paper investigates relaying and routing techniques and provides their end-to-end (E2E) performance analysis under the location uncertainty. To achieve robust and reliable links, we first consider adaptive beamwidths and derive the divergence angles under the absence and presence of a pointing-acquisitioning-and-tracking (PAT) mechanism. Thereafter, important E2E performance metrics (e.g., data rate, bit error rate, transmission power, amplifier gain, etc.) are obtained for two potential relaying techniques; decode & forward (DF) and optical amplify & forward (AF). We develop centralized routing schemes for both relaying techniques to optimize E2E rate, bit error rate, and power consumption. Alternatively, a distributed routing protocol, namely Light Path Routing (LiPaR), is proposed by leveraging the range-beamwidth tradeoff of UOWCs. LiPaR is especially shown to be favorable when there is no PAT mechanism and available network information. In order to show the benefits of multihop communications, extensive simulations are conducted to compare different routing and relaying schemes under different network parameters and underwater environments.

Traditional wired data center networks (DCNs) suffer from cabling complexity, lack flexibility, and are limited by the speed of digital switches. In this paper, we alternatively develop a top-down traffic grooming (TG) approach to the design and provisioning of mission-critical optical wireless DCNs. While switches are modeled as hybrid optoelectronic cross-connects, links are modeled as wavelength division multiplexing (WDM) capable free-space optic (FSO) channels. Using the standard TG terminology, we formulate the optimal mixed-integer TG problem considering the virtual topology, flow conversation, connection topology, non-bifurcation, and capacity constraints. Thereafter, we develop a fast yet efficient sub-optimal solution which grooms mice flows (MFs) and mission-critical flows (CFs) and forward on predetermined rack-to-rack (R2R) lightpaths. On the other hand, elephant flows (EFs) are forwarded over dedicated server-to-server (S2S) express lightpaths whose routes and capacity are dynamically determined based on the availability of wavelength and capacity. To prioritize the CFs, we consider low and high priority queues and analyze the delay characteristics such as waiting times, maximum hop counts, and blocking probability. As a result of grooming the sub-wavelength traffic and adjusting the wavelength capacities, numerical results show that the proposed solutions can achieve significant performance enhancement by utilizing the bandwidth more efficiently, completing the flows faster than delay sensitivity requirements, and avoiding the traffic congestion by treating EFs and MFs separately.

In this paper, we consider an non-ideal successive interference cancellation (SIC) receiver based imperfect non-orthogonal multiple access (NOMA) schemes whose performance is limited by three factors: 1) Power disparity \& sensitivity constraints (PDSCs), 2) Intra-cluster interference (ICRI), and 3) Intercell-interference (ICI). By quantifying the residual interference with a fractional error factor (FEF), we show that NOMA cannot always perform better than orthogonal multiple access (OMA) especially under certain receiver sensitivity and FEF levels. Assuming the existence of an offline/online ICI management scheme, the proposed solution accounts for the ICI which is shown to deteriorate the NOMA performance particularly when it becomes significant compared to the ICRI. Then, a distributed cluster formation (CF) and power-bandwidth allocation (PBA) approach are proposed for downlink (DL) heterogeneous networks (HetNets) operating on the imperfect NOMA. We develop a hierarchically distributed solution methodology where BSs independently form clusters and distributively determine the power-bandwidth allowance of each cluster. A generic CF scheme is obtained by creating a multi-partite graph (MPG) via partitioning user equipments (UEs) with respect to their channel gains since NOMA performance is primarily determined by the channel gain disparity of cluster members. A sequential weighted bi-partite matching method is proposed for solving the resulted weighted multi-partite matching problem. Thereafter, we present a hierarchically distributed PBA approach which consists of the primary master, secondary masters, and slave problems..., Comment: To appear in IEEE TCOM

Data center networks (DCNs) are essential infrastructures to embrace the era of highly diversified massive amount of data generated by emerging technological applications. In order to store and process such a data deluge, today's DCNs have to deploy enormous length of wires to interconnect a plethora of servers and switches. Unfortunately, wired DCNs with uniform and inflexible link capacities expose several drawbacks such as high cabling cost and complexity, low space utilization, and lack of bandwidth efficiency. Wireless DCNs (WDCNs) have emerged as a promising solution to reduce the time, effort, and cost spent on deploying and maintaining the wires. Thanks to its reconfigurability and flexibility, WDCNs can deliver higher throughputs by efficiently utilizing the bandwidth and mitigate the chronic DCN problems of oversubscription and hotspots. Moreover, wireless links enhance the fault-tolerance and energy efficiency by eliminating the need for error-prone power-hungry switches. Accordingly, this paper first compares virtues and drawbacks of millimeter wave (mmWave), terahertz (THz), and optical wireless communications as potential candidates. Thereafter, an in-depth discussion on advances and challenges in WDCNs is provided including physical and virtual topology design, quality of service (QoS) provisioning, flow classification, data grooming, and load balancing. Finally, exciting research opportunities are presented to promote the prospects of WDCNs., Comment: Submitted to IEEE Wireless Communications Magazine for a possible publication

Underwater optical wireless links have limited range and intermittent connectivity due to the hostile aquatic channel impairments and misalignment between the optical transceivers. Therefore, multi-hop communication can expand the communication range, enhance network connectivity, and provide a more precise network localization scheme. In this regard, this paper investigates the connectivity of underwater optical wireless sensor networks (UOWSNs) and its impacts on the network localization performance. Firstly, we model UOWSNs as randomly scaled sector graphs where the connection between sensors is established by point-to-point directed links. Thereafter, the probability of network connectivity is analytically derived as a function of network density, communication range, and optical transmitters' divergence angle. Secondly, the network localization problem is formulated as an unconstrained optimization problem and solved using the conjugate gradient technique. Numerical results show that different network parameters such as the number of nodes, divergence angle, and transmission range significantly influence the probability of a connected network. Furthermore, the performance of the proposed localization technique is compared to well-known network localization schemes and the results show that the localization accuracy of the proposed technique outperforms the literature in terms of network connectivity, ranging error, and number of anchors., Comment: Paper accepted for publication in IEEE Transactions on Mobile Computing

The next era of information revolution will rely on aggregating big data from massive numbers of devices that are widely scattered in our environment. Most of these devices are expected to be of low-complexity, low-cost, and limited power supply, which impose stringent constraints on the network operation. In this regard, this paper investigates aerial data aggregation and field estimation from a finite spatial field via an unmanned aerial vehicle (UAV). Instead of fusing, relaying, and routing the data across the wireless nodes to fixed locations access points, a UAV flies over the field and collects the required data for two prominent missions; data aggregation and field estimation. To accomplish these tasks, the field of interest is divided into several subregions over which the UAV hovers to collect samples from the underlying nodes. To this end, we formulate and solve an optimization problem to minimize total hovering and traveling time of each mission. While the former requires the collection of a prescribed average number of samples from the field, the latter ensures for a given field spatial correlation model that the average mean-squared estimation error of the field value is no more than a predetermined threshold at any point. These goals are fulfilled by optimizing the number of subregions, the area of each subregion, the hovering locations, the hovering time at each location, and the trajectory traversed between hovering locations. The proposed formulation is shown to be np-hard mixed integer problem, and hence, a decoupled heuristic solution is proposed. The results show that there exists an optimal number of subregions that balance the tradeoff between hovering and traveling times such that the total time for collecting the required samples is minimized., Comment: accepted to IEEE Transaction on Wireless communications

Underwater wireless communications can be carried out through acoustic, radio frequency (RF), and optical waves. Compared to its bandwidth limited acoustic and RF counterparts, underwater optical wireless communications (UOWCs) can support higher data rates at low latency levels. However, severe aquatic channel conditions (e.g., absorption, scattering, turbulence, etc.) pose great challenges for UOWCs and significantly reduce the attainable communication ranges, which necessitates efficient networking and localization solutions. Therefore, we provide a comprehensive survey on the challenges, advances, and prospects of underwater optical wireless networks (UOWNs) from a layer by layer perspective which includes: 1) Potential network architectures; 2) Physical layer issues including propagation characteristics, channel modeling, and modulation techniques 3) Data link layer problems covering link configurations, link budgets, performance metrics, and multiple access schemes; 4) Network layer topics containing relaying techniques and potential routing algorithms; 5) Transport layer subjects such as connectivity, reliability, flow and congestion control; 6) Application layer goals and state-of-the-art UOWN applications, and 7) Localization and its impacts on UOWN layers. Finally, we outline the open research challenges and point out the future directions for underwater optical wireless communications, networking, and localization research., Comment: This manuscript is submitted to IEEE Communication Surveys and Tutorials for possible publication