Search

Design of metal cofactor ligands is essential for controlling the reactivity of metalloenzymes. We investigated a carbene transfer reaction catalyzed by myoglobins containing iron porphyrin cofactors with one and two trifluoromethyl groups at peripheral sites (FePorCF3 and FePor(CF3)2, respectively), native heme and iron porphycene (FePc). These four myoglobins show a wide range of Fe(II)/Fe(III) redox potentials in the protein of +147 mV, +87 mV, +42 mV and −198 mV vs. NHE, respectively. Myoglobin reconstituted with FePor(CF3)2 has a more positive potential, which enhances the reactivity of a carbene intermediate with alkenes, and demonstrates superior cyclopropanation of inert alkenes, such as aliphatic and internal alkenes. In contrast, engineered myoglobin reconstituted with FePc has a more negative redox potential, which accelerates the formation of the intermediate, but has low reactivity for inert alkenes. Mechanistic studies indicate that myoglobin with FePor(CF3)2 generates an undetectable active intermediate with a radical character. In contrast, this reaction catalyzed by myoglobin with FePc includes a detectable iron–carbene species with electrophilic character. This finding highlights the importance of redox‐focused design of the iron porphyrinoid cofactor in hemoproteins to tune the reactivity of the carbene transfer reaction. [ABSTRACT FROM AUTHOR]

In the presence of 1 mol % of a chiral iron porphyrin catalyst, various 3‐arylmethyl‐substituted 2‐quinolones and 2‐pyridones underwent an enantioselective amination reaction (20 examples; 93–99 % ee). The substrates were used as the limiting reagents, and fluorinated aryl azides (1.5 equivalents) served as nitrene precursors. The reaction is triggered by visible light which allows a facile dediazotation at ambient temperature. The selectivity of the reaction is governed by a two‐point hydrogen bond interaction between the ligand of the iron catalyst and the substrate. Hydrogen bonding directs the amination to a specific hydrogen atom within the substrate that is displaced by the nitrogen substituent either in a concerted fashion or by a rebound mechanism. [ABSTRACT FROM AUTHOR]

Electrochemical devices, using renewable energy sources, for CO2 reduction (CO2R) coupled with water oxidation is an attractive strategy for the carbon‐neutral generation of solar fuels and chemical feedstocks. Highly reduced multi‐carbon (C2+) products (e.g., ethylene, ethanol, and propanol) are among the most attractive CO2R chemicals because of their commercial value and high energy densities. Here a new molecular hybrid material is reported that combines the capacity of molecular CO2R catalyst to generate CO with the capacity of Cu(0) materials to achieve C2+ products and further tune their reactivity with organic modifiers. A Fe‐A2B2 porphyrin containing two quaternary ammonium groups that set the right CO2R onset potential for a synergistic tandem performance with Cu2O nanocubes as the precursors is prepared. Furthermore, Fe‐A2B2 porphyrin is functionalized with two thiolate substituents in order to covalently anchor the molecular catalyst onto Cu providing an intimate interaction and great stability. The structural design enables a substantially enriched CO species adsorbed on Cu facilitated by the iron porphyrin catalyst that in turn facilitates the evolution of C2+ products, as demonstrated by in situ Raman spectroscopy. In addition, the whole electrode is further coated with phenyl modifiers that regulate the proton content and hydrophilicity in the neighborhood of the active centers. This approach affords Faradaic efficiencies in the range of 50% for ethylene and 77% for C2+ products at an applied potential of −1.05 V versus RHE. [ABSTRACT FROM AUTHOR]

The development of functional artificial photosynthetic devices relies on the understanding of mechanistic aspects involved in specialized photocatalysts. Modified iron porphyrins have long been explored as efficient catalysts for the light‐induced reduction of carbon dioxide (CO2) towards solar fuels. In spite of the advancements in homogeneous catalysis, the development of the next generation of catalysts requires a complete understanding of the fundamental photoinduced processes taking place prior to and after activation of the substrate by the catalyst. In this work, we employ a state‐of‐the‐art nanosecond optical transient absorption spectroscopic setup with a double excitation capability to induce charge accumulation and trigger the reduction of CO2 to carbon monoxide (CO). Our biomimetic system is composed of a urea‐modified iron(III) tetraphenylporphyrin (UrFeIII) catalyst, the prototypical [Ru(bpy)3]2+ (bpy=2,2'‐bipyridine) used as a photosensitizer, and sodium ascorbate as an electron donor. Under inert atmosphere, we show that two electrons can be successively accumulated on the catalyst as the fates of the photogenerated UrFeII and UrFeI reduced species are tracked. In the presence of CO2, the catalytic cycle is kick‐started providing further evidence on CO2 activation by the UrFe catalyst in its formal FeI oxidation state. [ABSTRACT FROM AUTHOR]

Sulfite reductases (SiRs) catalyze the reduction of SO32− to H2S in biosynthetic sulfur assimilation and dissimilation of sulfate. The mechanism of the 6e−/6H+ reduction of SO32− at the siroheme cofactor is debated, and proposed intermediates involved in this 6e− reduction are yet to be spectroscopically characterized. The reaction of SO2 with a ferrous iron porphyrin is investigated, and two intermediates are trapped and characterized: an initial Fe(III)–SO22− species, which undergoes proton-assisted S–O bond cleavage to form an Fe(III)–SO species. These species are characterized using a combination of resonance Raman (with 34S-labelled SO2), EPR and DFT calculations. Results obtained help reconcile the different proposed mechanisms for the SiRs. [ABSTRACT FROM AUTHOR]

A novel nitrogen-doped ordered mesoporous carbon (OMC) pore-embedded growth Pt-Ru-Fe nanoparticles (Pt1-Ru7.5-Fex@N-OMCs) composite was designed and synthesized for the first time. SBA-15 was used as a template, and dopamine was used as a carbon and nitrogen source and metal linking reagent. The oxidative self-polymerization reaction of dopamine was utilized to polymerize dopamine into two-dimensional ordered SBA-15 template pores. Iron porphyrin was introduced as an iron source at the same time as polymerization of dopamine, which was introduced inside and outside the pores using dopamine-metal linkage. Carbonization of polydopamine, nitrogen doping and iron nanoparticle formation were achieved by one-step calcination. Then the templates were etched to form Fex@N-OMCs, and finally the Pt1-Ru7.5-Fex@N-OMCs composites were stabilized by the successful introduction of platinum-ruthenium nanoparticles through the substitution reaction. The composite uniformly embeds the transition metal nanoparticles inside the OMC pores with high specific surface area, which limits the size of the metal nanoparticles inside the pores. At the same time, the metal nanoparticles are also loaded onto the surface of the OMCs, realizing the uniform loading of metal nanoparticles both inside and outside the pores. This enhances the active sites of the composite, promotes the mass transfer process inside and outside the pores, and greatly enhances the electrocatalytic performance of the catalyst. The material shows high electrocatalytic performance for adrenaline, which is characterized by a wide linear range, high sensitivity and low detection limit, and can realize the detection of actual samples. [ABSTRACT FROM AUTHOR]

In-operando spectroscopic observation of the intermediates formed during various electrocatalytic oxidation and reduction reactions is crucial to propose the mechanism of the corresponding reaction. Surface-enhanced resonance Raman spectroscopy coupled to rotating disk electrochemistry (SERRS-RDE), developed about a decade ago, proved to be an excellent spectroscopic tool to investigate the mechanism of heterogeneous oxygen reduction reaction (ORR) catalyzed by synthetic iron porphyrin complexes under steady-state conditions in water. The information about the formation of the intermediates accumulated during the course of the reaction at the electrode interface helped to develop better ORR catalysts with second sphere residues in the porphyrin rings. To date, the application of this SERRS-RDE setup is limited to ORR only because the thiol self-assembled monolayer (SAM)-modified Ag electrode, used as the working electrode in these experiments, suffers from stability issues at more cathodic and anodic potential, where H2O oxidation, CO2 reduction, and H+ reduction reactions occur. The current investigation shows the development of a second-generation SERRS-RDE setup consisting of an Ag nanostructure (AgNS)-modified graphite electrode as the working electrode. These electrodes show higher stability (compared to the conventional thiol SAM-modified Ag electrode) upon exposure to very high cathodic and anodic potential with a good signal-to-noise ratio in the Raman spectra. The behavior of this modified electrode toward ORR is found to be the same as the SAM-modified Ag electrode, and the same ORR intermediates are observed during electrochemical ORR. At higher cathodic potential, the signatures of Fe(0) porphyrin, an important intermediate in H+ and CO2 reduction reactions, was observed at the electrode–water interface. [ABSTRACT FROM AUTHOR]

Herein we studied visible-light-driven CO2 reduction using a series of tetra-phenylporphyrin iron catalysts and inexpensive anthraquinone dyes. Varying the functional groups on the phenyl moieties of the catalysts significantly enhances the photocatalytic activity, achieving an optimal turnover number (TON) of 10 476 and a selectivity of 100% in the noble-metal-free systems. The highest activity found in a bromo-substituted catalyst is attributed to favorable electron transfer from the photosensitizer to the iron porphyrin. [ABSTRACT FROM AUTHOR]

This document summarizes a study on the use of chiral iron porphyrin complexes as catalysts for remote enantioselective epoxidation reactions. The study found that catalysts with an elongated linker were most effective for olefins that were four carbon atoms away from the lactam binding site. The presence of a hydrogen-bonding interaction between the catalyst and the substrate was also important for achieving high enantioselectivity. However, a high enantioselectivity could only be achieved if the substrate binding offered a kinetic advantage compared to a racemic catalyst. The study provides valuable insights into the factors that influence the enantioselectivity of epoxidation reactions. [Extracted from the article]

Hemoglobin (Hb) is a hemoprotein containing iron porphyrin, which can catalyse a variety of unnatural reactions. Due to its poor reusability and stability, in this study, we developed a new method to prepare Hb-Cu3(PO4)2 hybrid nanoflowers (HNFs) by co-incubating Hb with Cu2+. This immobilized Hb was used to catalyse the synthesis of ethyl N-phenylglycinate via the carbene N–H insertion reaction. Under the optimum reaction conditions (aniline 1 mmol; ethyl diazoacetate 1 mmol; deionized (DI) water 10 ml; catalyst (protein content: 15 mg); sodium hydrosulfite 25 mg; 25 °C; 12 h), the catalytic yield of Hb-Cu3(PO4)2 HNFs reached as high as 87% and that of free Hb was 74%. In addition, Hb-Cu3(PO4)2 HNFs can maintain a high catalytic performance after 15 cycles and still achieve yields close to 70% of the initial yield after 60 days of storage, indicating that Hb-Cu3(PO4)2 HNFs have a high potential for application in Hb-catalysed organic reactions. [ABSTRACT FROM AUTHOR]

Iron porphyrins are known to provide CH4 as an eight-electron reduction product of CO2 in a photochemical reaction. However, there are still some aspects of the reaction mechanism that remain unclear. In this study, we synthesized iron porphyrin dimers and carried out the photochemical CO2 reduction reactions in N,N-dimethylacetamide (DMA) containing a photosensitizer in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as an electron donor. We found that, despite a low catalytic turnover number, CH4 was produced only when these porphyrins were facing each other. The close proximity of the cyclic dimers, distinguishing them from a linear Fe porphyrin dimer and monomers, induced multi-electron CO2 reduction, emphasizing the unique role of their structural arrangement in CH4 formation. [ABSTRACT FROM AUTHOR]

Given the relative scarcity of cobalt in the earth's crust, its retention in biological systems, principally (but not exclusively) in the cobalt corrinoids or derivatives of vitamin B12, may be surprising. The chemistry of these compounds and the much more widely utilized iron porphyrins, is compared and contrasted and an attempt made to explain the retention of cobalt chemistry in biology. [ABSTRACT FROM AUTHOR]

Developing high performance noble-metal-free electrocatalysts as an alternative to Pt-based catalysts for the oxygen reduction reaction (ORR) in energy conversion devices is highly desirable. We report herein the preparation of a coordination-polymer (CP)-derived Fe/CP/C composite as an electrocatalyst for the ORR with excellent activity and stability both in solution and in Zn-air batteries. The Fe/CP/C catalyst was obtained from the pyrolysis of an iron porphyrin Fe(TPP)Cl (5,10,15,20-tetraphenyl-21H, 23H-porphyrin iron(III) chloride) grafted Zn-coordination polymer with dangling functional groups 4,4'-oxybisbenzoic acid and 4,4'-bipyridine ligands. The Fe/CP/C catalyst showed much higher ORR activity with a half-wave potential (E1/2) of 0.90 V (vs. RHE) than the Fe/C catalyst (E1/2 = 0.85 V) derived from the carbon-blacksupported Fe porphyrins in 0.1 M KOH solution. When Fe/CP/C was used as the cathode electrocatalyst in Zn-air batteries (ZABs), the ZABs achieved a significantly higher open circuit voltage (OCV = 1.43 V) and maximum power density (Pmax = 142.8 mW cm-2) compared with Fe/C (OCV = 1.38 V, Pmax = 104.5 mW cm-2) and commercial 20 wt% Pt/C (OCV = 1.41 V, Pmax = 117.6 mW cm-2). Using dangling functional groups in CP to increase the loading efficiency of iron porphyrins offered a facile method to prepare high-performance noble-metal-free electrocatalysts for the ORR, which may provide promising applications to energy conversion devices. [ABSTRACT FROM AUTHOR]

The μ-nitrido-bridged iron phthalocyanine homodimer is a potent molecule-based CH4 oxidation catalyst that can effectively oxidize chemically stable CH4 under mild reaction conditions in an acidic aqueous solution including an oxidant such as H2O2. The reactive intermediate is a high-valent iron-oxo species generated upon reaction with H2O2. However, a detailed comparison of the CH4 oxidation activity of the μ-nitrido-bridged iron phthalocyanine dimer with those of μ-nitrido-bridged iron porphyrinoid dimers containing one or two porphyrin ring(s) has not been yet reported, although porphyrins are the most important class of porphyrinoids. Herein, we compare the catalytic CH4 and CH3CH3 oxidation activities of a monocationic μ-nitrido-bridged iron porphyrin homodimer and a monocationic μ-nitrido-bridged heterodimer of an iron porphyrin and an iron phthalocyanine with those of a monocationic μ-nitrido-bridged iron phthalocyanine homodimer in an acidic aqueous solution containing H2O2 as an oxidant. It was demonstrated that the CH4 oxidation activities of monocationic μ-nitrido-bridged iron porphyrinoid dimers containing porphyrin ring(s) were much lower than that of a monocationic μ-nitrido-bridged iron phthalocyanine homodimer. These findings suggested that the difference in the electronic structure of the porphyrinoid rings of monocationic μ-nitrido-bridged iron porphyrinoid dimers strongly affected their catalytic light alkane oxidation activities. [ABSTRACT FROM AUTHOR]

The synthesis of quaternary carbons often requires numerous steps and complex conditions or harsh reagents that act on heavily engineered substrates. This is largely a consequence of conventional polar-bond retrosynthetic disconnections that in turn require multiple functional group interconversions, redox manipulations, and protecting group chemistry. Here, we report a simple catalyst and reductant combination that converts two types of feedstock chemicals, carboxylic acids and olefins, into tetrasubstituted carbons through quaternization of radical intermediates. An iron porphyrin catalyst activates each substrate by electron transfer or hydrogen atom transfer, and then combines the fragments using a bimolecular homolytic substitution (SH2) reaction. This cross-coupling reduces the synthetic burden to procure numerous quaternary carbon-containing products from simple chemical feedstocks. [ABSTRACT FROM AUTHOR]

Iron porphyrins are among the most studied molecular catalysts for carbon dioxide (CO2) reduction and their reactivity is constantly being enhanced through the implementation of chemical functionalities in the second coordination sphere inspired by the active sites of enzymes. In this study, we were intrigued to observe that a multipoint hydrogen bonding scheme provided by embarked urea groups could also shift the redox activation step of CO2 from the well‐admitted Fe(0) to the Fe(I) state. Using EPR, resonance Raman, IR and UV‐Visible spectroscopies, we underpinned a two‐electron activation step of CO2 starting from the Fe(I) oxidation state to form, after protonation, an Fe(III)−COOH species. The addition of another electron and a proton to the latter species converged to the cleavage of a C−O bond with the loss of water molecule resulting in an Fe(II)−CO species. DFT analyses of these postulated intermediates are in good agreement with our collected spectroscopic data, allowing us to propose an alternative pathway in the catalytic CO2 reduction with iron porphyrin catalyst. Such a remarkable shift opens new lines of research in the design of molecular catalysts to reach low overpotentials in performing multi‐electronic CO2 reduction catalysis. [ABSTRACT FROM AUTHOR]

Iron porphyrins are among the most studied molecular catalysts for carbon dioxide (CO2) reduction and their reactivity is constantly being enhanced through the implementation of chemical functionalities in the second coordination sphere inspired by the active sites of enzymes. In this study, we were intrigued to observe that a multipoint hydrogen bonding scheme provided by embarked urea groups could also shift the redox activation step of CO2 from the well‐admitted Fe(0) to the Fe(I) state. Using EPR, resonance Raman, IR and UV‐Visible spectroscopies, we underpinned a two‐electron activation step of CO2 starting from the Fe(I) oxidation state to form, after protonation, an Fe(III)−COOH species. The addition of another electron and a proton to the latter species converged to the cleavage of a C−O bond with the loss of water molecule resulting in an Fe(II)−CO species. DFT analyses of these postulated intermediates are in good agreement with our collected spectroscopic data, allowing us to propose an alternative pathway in the catalytic CO2 reduction with iron porphyrin catalyst. Such a remarkable shift opens new lines of research in the design of molecular catalysts to reach low overpotentials in performing multi‐electronic CO2 reduction catalysis. [ABSTRACT FROM AUTHOR]

Iron porphyrins are among the most studied molecular catalysts for carbon dioxide (CO2) reduction and their reactivity is constantly being enhanced through the implementation of chemical functionalities in the second coordination sphere inspired by the active sites of enzymes. In this study, we were intrigued to observe that a multipoint hydrogen bonding scheme provided by embarked urea groups could also shift the redox activation step of CO2 from the well‐admitted Fe(0) to the Fe(I) state. Using EPR, resonance Raman, IR and UV‐Visible spectroscopies, we underpinned a two‐electron activation step of CO2 starting from the Fe(I) oxidation state to form, after protonation, an Fe(III)−COOH species. The addition of another electron and a proton to the latter species converged to the cleavage of a C−O bond with the loss of water molecule resulting in an Fe(II)−CO species. DFT analyses of these postulated intermediates are in good agreement with our collected spectroscopic data, allowing us to propose an alternative pathway in the catalytic CO2 reduction with iron porphyrin catalyst. Such a remarkable shift opens new lines of research in the design of molecular catalysts to reach low overpotentials in performing multi‐electronic CO2 reduction catalysis. [ABSTRACT FROM AUTHOR]

Iron porphyrins are among the most studied molecular catalysts for carbon dioxide (CO2) reduction and their reactivity is constantly being enhanced through the implementation of chemical functionalities in the second coordination sphere inspired by the active sites of enzymes. In this study, we were intrigued to observe that a multipoint hydrogen bonding scheme provided by embarked urea groups could also shift the redox activation step of CO2 from the well‐admitted Fe(0) to the Fe(I) state. Using EPR, resonance Raman, IR and UV‐Visible spectroscopies, we underpinned a two‐electron activation step of CO2 starting from the Fe(I) oxidation state to form, after protonation, an Fe(III)−COOH species. The addition of another electron and a proton to the latter species converged to the cleavage of a C−O bond with the loss of water molecule resulting in an Fe(II)−CO species. DFT analyses of these postulated intermediates are in good agreement with our collected spectroscopic data, allowing us to propose an alternative pathway in the catalytic CO2 reduction with iron porphyrin catalyst. Such a remarkable shift opens new lines of research in the design of molecular catalysts to reach low overpotentials in performing multi‐electronic CO2 reduction catalysis. [ABSTRACT FROM AUTHOR]

Iron ions in a square‐planar coordination can bind molecules at the vacant axial positions and are able to transform them in stoichiometric and catalytic reactions. Nature takes advantage of these properties by incorporating iron into porphyrin systems, which play a key role not only in the binding and transport of oxygen, but also in catalytic oxidation and reduction reactions involving cytochrome P450. Although these systems have been studied extensively, there are still unresolved questions regarding the interplay between the iron ions and the surrounding ligands. Phthalocyanines (Pc) create a similar environment for metal atoms and FePc is known for a long time. However, without axial ligands FePc aggregates leading to solids of low solubility. In this work we used a known six‐coordinate iron phthalocyanine derivative with bulky substituents and removed the stabilizing axial ligands. The resulting paramagnetic, four‐coordinate compound does not aggregate and dissolves well so that NMR spectroscopy can be employed for studying the molecular structure and the reactivity. Solvent molecules bind weakly to the iron centers and oxygen is reduced in the presence of H‐atom donors. The stoichiometric and catalytic reactivity with oxygen was studied in more detail. [ABSTRACT FROM AUTHOR]

Heme enzymes are the most prominent category of iron-containing metalloenzymes with the capability of catalyzing an astonishingly wide range of reactions like epoxidation, hydroxylation, demethylation, desaturation, reduction, sulfoxidation, and decarboxylation. Various enzymes in this category are P450s, heme peroxidases, catalases, myoglobin, cytochrome C, and others. Besides this, the natural promiscuity and amenability of these enzymes to protein engineering and evolution have also added several non-native reactions such as C–H, N–H, S–H insertions, cyclopropanation, and other industrially important reactions to their capabilities. Surprisingly, all of these reactions and their wide substrate scopes are attributed to changes in the active site scaffold of different heme enzymes as the center of all enzymes is constituted by a porphyrin ring containing iron. Multiple prominent research groups across the world, including 2018, Nobel Laureate Frances Arnold's group, have shown keen interest in engineering and evolving these enzymes for utilizing their industrial potential. Besides engineering the active site, researchers have also explored the possibility of these enzymes catalyzing non-native reactions by replacing the center porphyrin ring with other cofactors or by changing the iron in the porphyrin ring with other metal ions along with engineering the active site and thereby creating novel artificial metalloenzymes. Thus, in this mini-review from our group, for the first time, we are trying to catalog various activities catalyzed by heme enzymes and their engineered variants and their active usage in various industries along with shedding light on their potential for use in various applications in the future. [ABSTRACT FROM AUTHOR]

The catalytic activity of two iron‐based porphyrin complexes containing pyridine‐functionalized second coordination spheres, referred to as Py2XPFe and CuPy2XPFe, have been investigated for the hydrogen evolution reaction (HER) and compared with the unsubstituted analog TMPFe in acetonitrile. The CuPy2XPFe incorporates a second metal center within the pyridine residues and represents a heterodinuclear system, while the structurally analogous Py2XPFe lacks an additional metal in the second coordination sphere. Both the Py2XFe and CuPy2XPFe complexes are observed to activate the weak acid, acetic acid (AcOH) at the FeII/I couple rather than at the more energy intensive FeI/0 couple observed for the unfunctionalized TMPFe complex at low acid concentrations. The ability of the monometallic Py2XPFe to activate the weak proton source at the FeII/I couple manifests as an ECEC(E)′ type electrochemical mechanism, rather than an EECC(E)′ type mechanism as observed for TMPFe. The CuPy2XPFe displays improved reactivity compared with the Py2XPFe and TMPFe under the same substrate conditions, however the mechanistic nuances into bimetallic CuPy2XPFe system are currently unclear. The concentration of AcOH was incrementally increased and the rate constants of the initial protonation step i. e. formation of a hydridic species (k1,app), as well as of the protonation of the hydridic species to produce dihydrogen (kglobal) were calculated using the Foot‐of‐the‐wave and plateau current rate equation methodologies, respectively. The kinetic analysis indicates that the activation of protons through the ECEC(E)′ type mechanism for the Py2XPFe results in a system in which k1,app< kglobal. As both the monometallic Py2XPFe and bimetallic CuPy2XPFe activate the AcOH at less cathodic potentials than TMPFe under identical conditions, the overpotentials (ηTOF/2) for these complexes are thus dramatically lower. The reactivity difference of the Py2XPFe when compared to non‐substituted iron porphyrin analogs is due to the hanging group's influence, which is believed to either act as hydrogen bond promoters for the active site or aids to stabilize a catalytic intermediate species during catalysis. [ABSTRACT FROM AUTHOR]

Isoporphyrins have recently been identified as remarkable species capable of turning the nucleophile attached to the porphyrin ring into an electrophile, thereby providing umpolung of reactivity (Inorg. Chem. 2022, 61, 8105–8111). They are generated by nucleophilic attack on an iron(III) π‐dication, a class of species that has received scant attention. Here, we explore the effect of the porphyrin meso‐substituent and report a iron(III) π‐dication bearing the meso‐tetraphenylporphyrin (TPP) ligand. We provide an extensive study of the species by UV/Vis absorption, 2H NMR, EPR, applied field Mössbauer, and resonance Raman spectroscopy. We further explore the system's highly dynamic and tunable properties and address the nature of the axial ligands as well as the conformation of the porphyrin ring. The insights presented are essential for the rational design of catalysts for the umpolung of nucleophiles. Such catalytic avenues could for example provide a novel method for electrophilic chlorinations. We further examine the importance of electronic tuning of the porphyrin by nature of the meso‐substituent as a factor in catalyst design. [ABSTRACT FROM AUTHOR]

Single Atom Catalysis (SAC) is an expanding field of heterogeneous catalysis in which single metallic atoms embedded in different materials catalyze a chemical reaction, but these new catalytic materials still lack fundamental understanding when used in electrochemical environments. Recent characterizations of non-noble metals like Fe deposited on N-doped graphitic materials have evidenced two types of Fe-N4 fourfold coordination, either of pyridine type or of porphyrin type. Here, we study these defects embedded in a graphene sheet and immersed in an explicit aqueous medium at the quantum level. While the Fe-pyridine SAC model is clear cut and widely studied, it is not the case for the Fe-porphyrin SAC that remains ill-defined, because of the necessary embedding of odd-membered rings in graphene. We first propose an atomistic model for the Fe-porphyrin SAC. Using spin-polarized ab initio molecular dynamics, we show that both Fe SACs spontaneously adsorb two interfacial water molecules from the solvent on opposite sides. Interestingly, we unveil a different catalytic reactivity of the two hydrated SAC motives: while the Fe-porphyrin defect eventually dissociates an adsorbed water molecule under a moderate external electric field, the Fe-pyridine defect does not convey water dissociation. Single-atom catalysts (SACs) are highly promising materials for applications such as electrocatalytic water splitting, but coordination geometries around catalyst centers remain the subject of debate. Here, the authors use spin-polarized ab initio molecular dynamics simulations to compare the aqueous reactivities of iron porphyrin and iron pyridine SACs embedded in graphene, and predict the interfacial water dissociative adsorption mechanism under a moderate electric field for an iron porphyrin SAC. [ABSTRACT FROM AUTHOR]

Molecular catalysis of electrochemical reactions is a field of intense activity because of the current interest in electrifying chemical transformations, including both electrosynthesis of organic molecules and production of fuels via small molecule activation. Controlled potential electrolysis (CPE) is often coupled with in situ in operando spectroscopic methods with the aim to gather mechanistic information regarding the catalytic species involved. Herein, considering a simple mechanism for a homogeneous molecular catalysis of an electrochemical reaction, we establish the concentration profile of the catalyst in the electrolysis cell enabling to envision the information that can be obtained from the coupling of this CPE with a spectroscopic probe in the cell compartment. We show how the characteristic parameters of the system (catalytic rate constant, cell dimensions and stirring rate) affect the response with particular emphasis on the transition between two limiting cases, namely a 'fast' catalysis regime where catalysis only takes place in a small layer adjacent to the electrode surface and a 'slow' catalysis regime where catalysis takes place in the bulk of the solution. These formal concepts are then illustrated with an experimental example, the electroreduction of CO2 in dimethylformamide homogeneously catalyzed by iron tetraphenylporphyrin and followed by UV‐vis spectroscopy. [ABSTRACT FROM AUTHOR]

Photocatalytic CO2 reduction (CO2PR) into multi‐carbon products (especially C2H4) is a highly attractive route for global carbon cycle, however, which is seriously limited by sluggish C‐C coupling kinetics and competitive hydrogen evolution reaction (HER) and so on. Herein, the fabrication of a novel supramolecular assembly of NiAl‐Fe‐TCPP is reported by intercalating iron porphyrin (Fe‐TCPP) into NiAl‐layered double hydroxide (NiAl‐LDH), and the resultant NiAl‐Fe‐TCPP exhibit superior catalytic performance on CO2PR to C2H4 under visible light irradiation in presence of photosensitizer. A high C2H4 selectivity up to 93.4% in the carbon‐containing products with the production rate as high as 24.7 µmol h−1 can be achieved over NiAl‐Fe‐TCPP. The ex/in situ X–ray absorption spectoscopy (XAS) indicates that the electron transfer between NiAl‐LDH and Fe‐TCPP can promote the generation of low‐valence of Fe sites, resulting in the efficient production of C2H4. The spin‐polarized density functional theory (DFT) calculations find that the synergistic mechanism that CO2 molecules are activated to CO on NiAl‐LDH and then spilled to Fe‐TCPP and coupled to COCHO#, which is further reduced to C2H4, are feasible in the perspective of Gibbs free energy. Moreover, the strong host‐guest interactions between NiAl‐LDH and Fe‐TCPP lead to the promoted photocatalytic activity and superior cycle stability. [ABSTRACT FROM AUTHOR]

Abstract The catalytic activity of two iron‐based porphyrin complexes containing pyridine‐functionalized second coordination spheres, referred to as Py2XPFe and CuPy2XPFe, have been investigated for the hydrogen evolution reaction (HER) and compared with the unsubstituted analog TMPFe in acetonitrile. The CuPy2XPFe incorporates a second metal center within the pyridine residues and represents a heterodinuclear system, while the structurally analogous Py2XPFe lacks an additional metal in the second coordination sphere. Both the Py2XFe and CuPy2XPFe complexes are observed to activate the weak acid, acetic acid (AcOH) at the FeII/I couple rather than at the more energy intensive FeI/0 couple observed for the unfunctionalized TMPFe complex at low acid concentrations. The ability of the monometallic Py2XPFe to activate the weak proton source at the FeII/I couple manifests as an ECEC(E)′ type electrochemical mechanism, rather than an EECC(E)′ type mechanism as observed for TMPFe. The CuPy2XPFe displays improved reactivity compared with the Py2XPFe and TMPFe under the same substrate conditions, however the mechanistic nuances into bimetallic CuPy2XPFe system are currently unclear. The concentration of AcOH was incrementally increased and the rate constants of the initial protonation step i. e. formation of a hydridic species (k1,app), as well as of the protonation of the hydridic species to produce dihydrogen (kglobal) were calculated using the Foot‐of‐the‐wave and plateau current rate equation methodologies, respectively. The kinetic analysis indicates that the activation of protons through the ECEC(E)′ type mechanism for the Py2XPFe results in a system in which k1,app< kglobal. As both the monometallic Py2XPFe and bimetallic CuPy2XPFe activate the AcOH at less cathodic potentials than TMPFe under identical conditions, the overpotentials (ηTOF/2) for these complexes are thus dramatically lower. The reactivity difference of the Py2XPFe when compared to non‐substituted iron porphyrin analogs is due to the hanging group's influence, which is believed to either act as hydrogen bond promoters for the active site or aids to stabilize a catalytic intermediate species during catalysis.

A novel iron porphyrin complex with hydroquinone moieties as proton/electron mediators at meso positions was designed and synthesised. The complex serves as an efficient catalyst for photochemical CO2 reduction, and its turnover frequency (TOF = 1.3 × 104 h−1) was the highest among those of comparable systems with sufficient durability. [ABSTRACT FROM AUTHOR]

The organic dyes used in printing and dyeing wastewater have complex components, diverse structures and strong chemical stability, which make them not suitable for treatment and difficult to degrade in the environment. Porphyrins are macromolecules with 18 π electrons formed by four pyrrole molecules connected with a methylene bridge that has a stable structure. Porphyrin combines with iron to form an active intermediate with a structure similar to the cytochrome P450 enzyme, so they are widely used in the biomimetic field. In the current study, 5,10,15,20-tetra (4-carboxyphenyl) porphine ferric chloride (III) (Fe(III)TCPP) was used as a catalyst and iodosobenzene was used as an oxidant to explore the catalytic degradation of triphenylmethane dyes, such as rhodamine B (RhB) and malachite green (MG). The results of UV-Vis spectral analysis have shown that the conversion rate of the rhodamine B was over 90% when the amount of Fe(III)TCPP was 0.027 mM and the amount of iodosobenzene was eight equivalents. When the catalyst was 0.00681 mM and the amount of the oxidant was five equivalents, the conversion rate of the malachite green reached over 95%. This work provides a feasible method for the degradation of triphenylmethane dyes. [ABSTRACT FROM AUTHOR]

The pervasive nature, efficiency, and selectivity as catalysts make enzymes indispensable in chemical syntheses and drug delivery. Enzyme's use is hindered by their fragile nature and high cost, and so, their encapsulation into MOFs is a crucial strategy for ensuring the maximum retention of enzyme activity and guaranteeing the distribution of analytes to and for the enzyme active sites. Owing to its efficient catalytic activity and high thermal and chemical stabilities of ZIF-8, it is an attractive carrier of enzymes for biosensing and biocatalysis. ZIF-8 is typically fabricated via a solvothermal procedure, although other synthesis methods like microwave, microwave-assisted, ionothermal, mechanochemical, steam-assisted, and sonochemical synthesis are used. Room-temperature synthesis is more eco-friendly and hence has received great applications. Metalloenzymes have gained attention because of their merits over natural enzymes. The iron porphyrin derivative, heme, contains the active site of hemeproteins. This active site mimics the peroxidase-like activity. The heme centre is encapsulated with ZIF-8 to form crystals and protect them. This strategy is widely utilized due to its excellent qualities in imitating the catalytic activities seen in native peroxidase. Protein-ZIF-8 hybrid amalgams availing greater catalytic activity for visual colourimetric biocatalytic sensing have attracted increasing interest by using ZIF-8 as an enzyme-immobilization matrix and fluorescence quencher. Our group hence outlined various mechanisms involved in synthesizing ZIF-8, comparing said methods, and discussed using ZIF_8@enzyme mimics for colourimetric assays. This paper ends by demonstrating ZIF-8 in other research directions. [ABSTRACT FROM AUTHOR]

The temperature dependency of photovoltaic power conversion efficiency (PCE) has been a key challenge to solar applications due to intrinsic processes. Herein, an alternative strategy is developed by modulating the solar light spectrum with a series of photonic hybrids. Transparent thin films are synthesized with the solutions of porphyrin compounds and iron oxides which exhibit strong absorptions in the UV and IR regions. These spectral modulating thin films are photonically tuned via compositional optimization to absorb photons near 400 nm and above 1127 nm from solar spectrum to reduce thermalization and sub‐bandgap absorption. These spectral modulators are applied in a particular configuration above a commercial silicon panel to partially filter the simulated solar light. The PCE of the silicon panel suffers a significant decrease due to temperature increase from 22.9 to 92.9 °C after 60 min solar irradiation, resulting in a PCE decrease from 25.1% to 16.3%. With the transparent spectral modulators, upon solar irradiation for 60 min, the maximum PCE has maintained at 20.5%. The mechanisms of PCE enhancement are identified based on reduced thermalization and sub‐bandgap absorption. [ABSTRACT FROM AUTHOR]

The present study is motivated by the long-term objective of understanding how ionic liquids are biodegraded by cytochrome P450, which contains iron porphyrin (FeP) serving as the catalytic center. To this end, the current study is designed to elucidate the impact of types and conformations of ionic liquids on the binding energy with FeP, the key interactions that stabilize the ionic liquid–FeP complex, and how the electron uptake ability of FeP is altered in the presence of ionic liquids. Four classes of ionic liquids are considered: 1-alkyl-3-methylimidazolium, 1-alkyl-pyridinium, 1-alkylsulfonium, and N-methyl-N-alkylpyrrolidinium. The influence of linear alkyl chains of ethyl, butyl, hexyl, octyl, and decyl is examined on the favorable binding modes with FeP, considering two widely different conformations: tail up and tail down with respect to FeP. Electronic structure calculations are performed at the M06 level of theory with the 6-31G(d,p) basis set for C, H, and N atoms, while the Lanl2DZ basis set is employed for Fe. Donor–acceptor interactions contributing to the binding of ionic liquids to FeP are unraveled through the natural bond orbital analysis. The results from this study indicate that the binding energies are dependent not only on the class of ionic liquids but also on the conformations presented to FeP. The propensity of FeP to acquire an electron is significantly enhanced in the presence of ionic liquid cations, irrespective of the type and the alkyl chain length. [ABSTRACT FROM AUTHOR]

Iron(II / III)porphyrin/cyclodextrin inclusion complexes serve as hemoprotein models in vivo. Here we showed the iron(III)porphyrin complex to be spontaneously reduced to its iron(II) state in mouse circulation. The reduced complex bound endogenous CO from carboxyhemoglobin, which was followed by urinary excretion. The natural reduction system was found to be effective for synthetic heme-model compounds. [ABSTRACT FROM AUTHOR]

Iron‐catalyzed asymmetric amination of C(sp3)−H bonds is appealing for synthetic applications due to the biocompatibility and high earth abundance of iron, but examples of such reactions are sparse. Herein we describe chiral iron complexes of meso‐ and β‐substituted‐porphyrins that can catalyze asymmetric intramolecular C(sp3)−H amination of aryl and arylsulfonyl azides to afford chiral indolines (29 examples) and benzofused cyclic sulfonamides (17 examples), respectively, with up to 93 % ee (yield: up to 99 %) using 410 nm light under mild conditions. Mechanistic studies, including DFT calculations, for the reactions of arylsulfonyl azides reveal that the Fe(NSO2Ar) intermediate generated in situ under photochemical conditions reacts with the C(sp3)−H bond through a stepwise hydrogen atom transfer/radical rebound mechanism, with enantioselectivity arising from cooperative noncovalent interactions between the Fe(NSO2Ar) unit and the peripheral substituents of the chiral porphyrin scaffold. [ABSTRACT FROM AUTHOR]

Sustainable functionalization of renewable aromatics is a key step to supply our present needs for specialty chemicals and pursuing the transition to a circular, fossil-free economy. In the present work, three typically stable aromatic compounds, representative of products abundantly obtainable from biomass or recycling processes, were functionalized in one-pot oxidation reactions at room temperature, using H2O2 as a green oxidant and ethanol as a green solvent in the presence of a highly electron withdrawing iron porphyrin catalyst. The results show unusual initial epoxidation of the aromatic ring by the green catalytic system. The epoxides were isolated or evolved through rearrangement, ring opening by nucleophiles, and oxidation. Acridine was oxidized to mono- and di-oxides in the peripheral ring: 1:2-epoxy-1,2-dihydroacridine and anti-1:2,3:4-diepoxy-1,2,3,4-tetrahydroacridine, with TON of 285. o-Xylene was oxidized to 4-hydroxy-3,4-dimethylcyclohexa-2,5-dienone, an attractive building block for synthesis, and 3,4-dimethylphenol as an intermediate, with TON of 237. Quinoline was directly functionalized to 4-quinolone or 3-substituted-4-quinolones (3-ethoxy-4-quinolone or 3-hydroxy-4-quinolone) and corresponding hydroxy-tautomers, with TON of 61. [ABSTRACT FROM AUTHOR]

Iron porphyrins are attractive catalysts for the electrochemical reduction of carbon dioxide (CO2), owing to their high activity and selectivity while being tunable through ligand functionalization. Iron tetraphenyl porphyrin (FeTPP) is the simplest of them, and its catalytic behavior toward CO2 has been studied for decades. Although kinetic information is available, spectroscopic signatures are lacking to describe intermediate species along the catalytic cycle. In situ UV‐Visible and X‐ray absorption near edge spectroscopy (XANES) were used to monitor the local and electronic structure of FeTPP homogeneously dissolved in dimethyl formamide (DMF) under reductive potentials. The Fe(III) starting species was identified, together with its one, two and three electron‐reduced counterparts under both argon and CO2 atmospheres. Under argon, the second and third reductions lead to species with electronic density shared between the metal and the porphyrin backbone. In the presence of CO2 and with a low amount of protons, the doubly and triply reduced species interact with CO2 at the metallic site. In light of these results, an electronic structure for a key intermediate along the catalytic cycle of the CO2‐to‐CO reduction reaction is proposed. [ABSTRACT FROM AUTHOR]

Photovoltaic solar cells have been extensively used for various applications and are considered one of the most efficient green energy sources. However, their 2D surface area solar harvesting has limitations, and there is an increasing need to explore the possibility of multiple layer solar harvest for enhanced energy density. To address this, we have developed spectral-selective transparent thin films based on porphyrin and iron oxide compounds that allow solar light to penetrate multiple layers, significantly increasing solar harvesting surface area and energy density. These thin films are designed as photovoltaic (PV) and photothermal (PT) panels that can convert photons into either electricity or thermal energy for various green energy applications, such as smart building skins and solar desalination. The advantages of this 3D solar harvesting system include enlarged solar light collecting surface area and increased energy density. The multilayer system transforms the current 2D to 3D solar harvesting, enabling efficient energy generation. This review discusses recent developments in the synthesis and characterization of PV and PT transparent thin films for solar harvesting and energy generation using multilayers. Major applications of the 3D solar harvesting system are reviewed, including thermal energy generation, multilayered DSSC PV system, and solar desalination. Some preliminary data on transparent multilayer DSSC PVs are presented. [ABSTRACT FROM AUTHOR]

A combination of ion mobility mass spectrometry (IMS-MS), collision-induced dissociation (CID), Rice–Ramsperger–Kassel–Marcus modeling, and computational chemistry was used to determine the structure and unimolecular chemistry of dimeric and trimeric sulfonated meso-tetraphenylporphyrins with negative charges from −2 to −5. By comparing experimental collision cross sections obtained from calibrated IMS drift times with calculated cross sections for the lowest energy calculated structures, it was confirmed that dimer species have a bridged structure where the two monomers are connected through iron–sulfonic interactions. Dimer species with the charge states −4 and −5 dissociate into two monomer units where the charge is distributed between the monomers. Dimers with lower charge states also lose neutral SO2 and SO3 groups. For trimeric species with charge states of −3 and −4, IMS identifies three and two isomers, respectively. It was confirmed that the −4 charged trimer isomers consist of one with three stacked monomers and one in which the third monomer unit is connected to a stacked dimer via two iron–sulfonic bonds (bridged/stacked). Both yielded the same CID breakdown diagram confirming that the two isomers likely interconvert prior to dissociation. The significantly larger density of states of the bridged–stacked structure compared with the stacked structure means the former is likely the reactive configuration. [ABSTRACT FROM AUTHOR]

Efficient synthesis of functional nanomaterials for simple, sensitive, and accurate colorimetric detection of chromate [Cr(VI)] has attracted great interest due to the toxicity of Cr(VI). Here, novel covalently assembled iron porphyrins (CAIPs) are fabricated through covalently cross‐linking reaction between iron‐tetra‐(4‐hydroxy‐phenyl) porphyrin and three different cross‐linkers based on 3,3´‐dithiodipropionic acid. The results show that CAIPs have a spherical vesicle framework with favorable dimensional structure and enzymatic activity. In the presence of H2O2, CAIPs exhibit high peroxidase‐like activity toward 3,3´,5,5´‐tetramethylbenzidine. Based on these findings, CAIPs are used as an efficient colorimetric catalyst for the sensitive and selective detection of Cr(VI) with a detection limit about 23 nm. The feasibility of this method for real‐water samples is verified by a standard addition experiment. This system further facilitates the developments of nanomaterial, and its application in colorimetric detection fields. [ABSTRACT FROM AUTHOR]

The photocatalytic CO2 reduction into value‐added chemicals is regarded as one promising technology to mitigate environmental issues and the energy crisis of the modern world due to the extended CO2 emissions. Recent advances have shown that iron porphyrins are considered as one of the most efficient molecular catalysts in the activation and reduction of molecules like CO2. Thus, a suitably modified FeIII porphyrin ([FeIII(TF4TMAP)](CF3SO3)5) was prepared and its catalytic activity in terms of photocatalytic reduction of CO2 was studied. This iron catalyst possesses four fluorine substituents in the ortho and the meta position of each meso‐phenyl group of the porphyrin, while trimethylammonium groups were placed in the para position. Photocatalytic studies were performed in the presence of an iridium complex as a chromophore and have shown that [FeIII(TF4TMAP)](CF3SO3)5 can effectively reduce CO2, achieving excellent turnover numbers (up to 5500 TONs) and high turnover frequencies. The main reduction product of this photocatalytic system was CO, and only a small amount of hydrogen was detected, presenting a maximum selectivity of 86 % for CO. [ABSTRACT FROM AUTHOR]

The detection of pollutant and toxic gases has attracted extensive attention due to the growing environmental issues. In the present investigation, free-based tetraphenyl porphyrin (TPP) and iron tetraphenyl porphyrin (FeTPP) are used to functionalize thermally reduced graphene oxide (rGO) and further used for the detection of carbon monoxide (CO). TPP and FeTPP functionalized rGO (FeTPP@rGO) sensors are fabricated on a glass substrate with thermally coated copper electrodes. The materials are characterized with X-ray diffraction (XRD), Fourier transforms infrared (FTIR) spectroscopy, Raman spectroscopy, UV–visible spectroscopy, atomic force microscopy, scanning electron microscopy, and energy dispersive spectroscopy. The current–voltage (I–V) characteristics have also been studied to demonstrate the operation of the device. In addition, the FeTPP@rGO device shows high sensitivity toward the detection of CO. By testing in the chemiresistive sensing modality, the as-fabricated device shows good response and recovery of 60 s and 120 s, respectively, with a low detection limit of 2.5 ppm. [ABSTRACT FROM AUTHOR]

For a future hydrogen economy, non‐precious metal catalysts for the water splitting reactions are needed that can be implemented on a global scale. Metal‐nitrogen‐carbon (MNC) catalysts with active sites constituting a metal center with fourfold coordination of nitrogen (MN4) show promising performance, but an optimization rooted in structure‐property relationships has been hampered by their low structural definition. Porphyrin model complexes are studied to transfer insights from well‐defined molecules to MNC systems. This work combines experiment and theory to evaluate the influence of porphyrin substituents on the electronic and electrocatalytic properties of MN4 centers with respect to the hydrogen evolution reaction (HER) in aqueous electrolyte. We found that the choice of substituent affects their utilization on the carbon support and their electrocatalytic performance. We propose an HER mechanism for supported iron porphyrin complexes involving a [FeII(P⋅)]− radical anion intermediate, in which a porphinic nitrogen atom acts as an internal base. While this work focuses on the HER, the limited influence of a simultaneous interaction with the support and an aqueous electrolyte will likely be transferrable to other catalytic applications. [ABSTRACT FROM AUTHOR]

The visible and Mössbauer spectra of [Fe(II)(Por)L2] and [Fe(II)(Por)L(CO)] complexes (where Por = protoporphyrin IX (PPIX) or tetra(p-sulfophenyl)porphyrin (TPPS) and L = an aliphatic or aromatic nitrogenous base) are reported and discussed. The results are compared to those of previously reported [Fe(II)(Por)L(CO)] complexes (where Por = PPIX, TPPS, PMXPP, TPP, OMTBP and OEP; L = a nitrogenous aromatic ligand) and HbCO (where Hb = haemoglobin) and MyCO (where My = myoglobin). A new approach, to extracting information from the Mössbauer parameters has been developed by plotting those of the [Fe(II)(Por)L2] complexes against those of [Fe(II)(Por)L(CO)] complexes for the same ligands, has yielded a series of trend lines that show a significant dependence on both the nature of the porphyrin and also of the nitrogenous ligand. Different trend lines were found for aromatic nitrogenous ligands to aliphatic nitrogenous ligands showing that the porphyrins could donate different amounts of charge to the Fe(II) cations as the L ligand changed, and hence, they display electron sink properties. From the plots, it was shown that haemoglobin and myoglobin both bind CO very strongly compared to the model complexes studied herein. Using the reported structural and Mössbauer data for the [Fe(II)(Por)L2] and [Fe(II)(Por)L(CO)] complexes, it proved possible and instructive to plot the Mössbauer parameters against a number of the bond lengths around the Fe(II) cations. The interpretation of the resulting trend lines both supported and facilitated the extension of our findings enabling further understanding of the geometry of the bonding in CO haemoglobin and CO myoglobin. [ABSTRACT FROM AUTHOR]

Electronic structure calculations using the density-functional theory (DFT) have been performed to analyse the effect of water molecules and protonation on the heme group of peroxidases in different redox (ferric, ferrous, compounds I and II) and spin states. Shared geometries, spectroscopic properties at the Soret region, and the thermodynamics of peroxidases are discussed. B3LYP and M06-2X density functionals with different basis sets were employed on a common molecular model of the active site (Fe-centred porphine and proximal imidazole). Computed Gibbs free energies indicate that the corresponding aquo complexes are not thermodynamically stable, supporting the five-coordinate Fe(III) centre in native ferric peroxidases, with a water molecule located at a non-bonding distance. Protonation of the ferryl oxygen of compound II is discussed in terms of thermodynamics, Fe–O bond distances, and redox properties. It is demonstrated that this protonation is necessary to account for the experimental data, and computed Gibbs free energies reveal pKa values of compound II about 8.5–9.0. Computation indicates that the general oxidative properties of peroxidase intermediates, as well as their reactivity towards water and protons and Soret bands, are mainly controlled by the iron porphyrin and its proximal histidine ligand. [ABSTRACT FROM AUTHOR]

Hydrogen peroxide (H2O2) and glucose play a key role in many cellular signaling pathways. The efficient and accurate in situ detection of H2O2 released from living cells has attracted extensive research interests. Herein, a new porphyrin-based porous covalent organic framework (TAP-COF) was fabricated via one-step condensation of 1,6,7,12-tetrachloroperylene tetracarboxylic acid dianhydride and 5,10,15,20-tetrakis (4-aminophenyl)porphyrin iron(III). The obtained TAP-COF has high surface areas, abundant surface catalytic active sites, and highly effective electron transport due to its precisely controllable donor–acceptor arrangement and 3D porous structure. Then, the new TAP-COF exhibited excellent peroxidase-like catalytic activity, which could effectively catalyze oxidation of the substrate 3,3′,5,5′-tetramethylbenzidine by H2O2 to produce a typical blue-colored reaction. On this basis, simple, rapid and selective colorimetric methods for in situ H2O2 detection were developed with the detection limit of 2.6 nM in the wide range of 0.01 to 200 μM. The colorimetric approach also could be used for in situ detection of H2O2 released from living MCF-7 cells. This portable sensor based on a COF nanozyme not only opens a new path for point-of-care testing, but also has potential applications in the field of cell biology and clinical diagnosis. [ABSTRACT FROM AUTHOR]

We present a supramolecular approach to catalyzing photochemical CO2 reduction through second‐sphere porosity and charge effects. An iron porphyrin box (PB) bearing 24 cationic groups, FePB‐2(P), was made via post‐synthetic modification of an alkyne‐functionalized supramolecular synthon. FePB‐2(P) promotes the photochemical CO2 reduction reaction (CO2RR) with 97 % selectivity for CO product, achieving turnover numbers (TON) exceeding 7000 and initial turnover frequencies (TOFmax) reaching 1400 min−1. The cooperativity between porosity and charge results in a 41‐fold increase in activity relative to the parent Fe tetraphenylporphyrin (FeTPP) catalyst, which is far greater than analogs that augment catalysis through porosity (FePB‐3(N), 4‐fold increase) or charge (Fe p‐tetramethylanilinium porphyrin (Fe‐p‐TMA), 6‐fold increase) alone. This work establishes that synergistic pendants in the secondary coordination sphere can be leveraged as a design element to augment catalysis at primary active sites within confined spaces. [ABSTRACT FROM AUTHOR]

Background: Human hemoglobin is a tetrameric metalloporphyrin. The heme part contains iron radicle and porphyrin. The globin part consists of two pairs of amino-acid chains. The absorption spectrum of hemoglobin spans from 250 nm to as high as 2,500 nm, with high coefficients reported in blue and green color zone. The visible absorption spectrum of deoxyhemoglobin has one, while the visible absorption spectrum of oxyhemoglobin shows two peaks. Objective: (1) To study absorption spectrometry of hemoglobin in 42 0 t o 600 nm range; (2) to conduct preclinical experiments to validate a new device and technology based on green color absorption by hemoglobin; (3) to use this new technology and device for phase 1 study in healthy human volunteers for confirmation Design, material and methods: (1) Checking absorption spectrometry of hemoglobin in venous blood. We measured absorption spectrometry of 25 mother-baby pairs as an observational study. Readings were plotted from 400 nm to 560 nm. These included peaks, flat lines and deeps. Graph tracings of all samples – cord blood and maternal blood – showed similar patterns. (2) Preclinical experiments were set up (a) t o correlate the reflection of green light by hemoglobin and concentration of hemoglobin, (b) to correlate concentration of O 2 and reflection of green light related to oxyhemoglobin, (c) to correlate concentration of melanin in upper and the hemoglobin in lower layer of tissue phantom and to check the sensitivity of new device with green light for measuring Hb in presence of high levels of melanin, and lastly (d) to check if the new device can measure changes in oxy-hemoglobin and deoxy-h e m o globin, again in presence of high levels of melanin with normal as well as with low levels of hemoglobin. The experiments using bilayer tissue phantom were conducted with horse blood in lower cup as dermal tissue phantom and synthetic melanin in upper layer as epidermal tissue phantom. (3) Phase 1 observational studies following a protocol approved by the institutional review board (IRB) were done in two cohorts. Readings were taken using our device and a commercially available pulse oximeter. In the comparison arm we had Point of Care (POC) Hb test (HemoCu or iSTAT blood test). We had 127 data points of POC Hb test and 170 data points for our device and pulse oximeters. This device uses two wavelengths from the visible spectrum of light and uses reflected light. Light of specific wavelengths is shone on the skin of the individual, and the reflected light is collected as 'optical signal'. This optical signal – after conversion to electrical signal – is processed and finally analysed with a digital display on the screen. Melanin is accounted using Von Luschan's chromatic scale (VLS) and a specially designed algorithm. Results: In this set of various preclinical experiments using different concentrations of hemoglobin and melanin, we indeed demonstrated good sensitivity of our device. It could pick up signals from hemoglobin despite high levels of melanin. Our device is a non-invasive device to measure hemoglobin like a pulse oximeter. Results of our device and pulse oximeter were compared with those by POC Hb test like HemoCu and iSTAT. Our device showed better trending linearity and concordance than a pulse oximeter. Since the absorption spectrum of hemoglobin is the same is new-borns and adults, we could develop one device for all age groups and for people of all colors. Furthermore, the light is shone on the wrist of the individual and is then measured. So, in future this device has the potential of being incorporated in a wearable or smart watch technology. [ABSTRACT FROM AUTHOR]

Background: Human hemoglobin (Hb) is a tetrameric metalloporphyrin. Heme part contains iron radicle and porphyrin. The globin part has pairs of amino-acid chains. Healthy adults have “Hemoglobin-A” made of two alpha and two beta chains (α2 β2) while a newborn baby has “Hemoglobin-A (α2 β2)” and “Hemoglobin-F (α2 γ2)”. There are few reports about absorption spectrometry of Hb in cord blood. We have here compared absorption spectrum of Hb in cord blood and maternal blood samples (adult blood samples) together. Objective: This was done in two parts. Part 1 was about studying absorption spectrum of Hb in cord blood and maternal blood. Part 2 was about developing a comprehensive noninvasive technology and using the same for measurement of Hb in mother (adult) and new-born baby. Design: Observational study. Material and methods: Part 1. After IRB approval, 25 pregnant mothers enrolled for the study. Cord blood/neonatal blood samples were collected from placental end in ethylene diamine tetra-acetic acid (EDTA) tube after the delivery of fetus and placenta (venous blood). Maternal blood was collected by peripheral venepuncture before delivery/labor. Part 2. Using noninvasive technology for measurement of Hb in mother (adult) and new-born baby. After the necessary approval five pairs of mother and new-born were enrolled in the study to measure Hb by noninvasive method using our novel device. The novel device (SH-1) uses electromagnetic radiations of specific wavelengths between 520 and 580 nm. Light was projected on forehead for a few seconds, operating the light sources one by one. Of the projected light, some was reflected by the recipient’s skin. This optical signal was collected by photosensors and converted to electrical signals. After amplification, this was then transmitted to processor unit. Later, Hbs values are displayed. The results were then tallied with standard laboratory methods in clinical laboratory. Results: Part 1. As expected in our study; all blood samples showed Soret band of same peak and wavelength. We expected different spikes corresponding to four globin chains namely alpha, beta, gamma, and delta. But interestingly, both neonatal and maternal blood samples had identical peaks. Part 2. The results appear promising. The Hb as measured by noninvasive method matches well with standard laboratory test. Significance: The energy level of Hb is low in deoxygenated state compared to oxyhemoglobin. In a state of high energy level, alpha and beta and gamma globin chains show obvious different peaks. Since cord blood and maternal sample was obviously venous or in deoxygenated state with low energy level, single peak of absorption was observed for all three globin chains. Since maternal and cord blood showed similar absorption spectra, it was possible to develop a common method for estimation of biomarkers – Hb in adults and new-borns alike. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ag or Au nanoparticles were deposited on ZnIn 2 S 4 via in situ sulfur vacancy induced metal precursor reduction approach. • ZIS/Ag(Au)/FeTCPP system was applied for CO 2 photoreduction. • Ag function as a promoter for interfacial charge transfer from ZnIn 2 S 4 to the FeTCPP and greatly facilitates the CO production. • The loaded Au is beneficial to H 2 generation. The construction of hybrid catalysts composed of inorganic semiconductors and molecular catalysts shows great potential for achieving high photocatalytic carbon dioxide (CO 2) conversion efficiency. In this study, ZnIn 2 S 4 was first synthesized via a solvothermal route. Gold (Au) and silver (Ag) nanoparticles were then deposited on ZnIn 2 S 4 via the reduction of noble metal precursor by sulfur vacancy defects. The obtained composite was further combined with tetra(4-carboxyphenyl)porphyrin iron(III) chloride (FeTCPP) molecular catalyst for efficient photocatalytic CO 2 conversion. The roles of different noble metal nanoparticles in charge separation and interfacial electron transfer have been comprehensively studied. The photocatalytic performance and photoelectrochemical characterizations demonstrate that the introduction of Ag or Au nanoparticles is beneficial for charge separation. More importantly, the presence of Ag nanoparticles plays a crucial role in promoting the interfacial charge transfer between ZnIn 2 S 4 and FeTCPP, whereas, Au nanoparticles function as active sites for the water reduction reaction. [ABSTRACT FROM AUTHOR]