Search

Multielectrode arrays are fabricated from thin films of highly conductive and ductile metals, which cannot mimic the natural environment of biological tissues. These properties limit the conformability of the electrode to the underlying target tissue and present challenges in developing seamless interfaces. By introducing porous, hydrogel materials that are embedded with metal additives, highly conductive hydrogels can be formed. Tuning the hydrogel composition, % volume and aspect ratio of different additive(s), and the processing conditions of these composite materials can alter the mechanical and electrical properties. The resulting materials have a high surface area and can be used as biomaterial scaffolds to support the growth of macrophages for 5 days. Further optimization can enable the use of the materials for the electrodes in implantable arrays, or as living electrode platforms, to study and modulate various cellular cultures. These advancements would benefit both in vivo and in vitro applications of tissue engineering. [ABSTRACT FROM AUTHOR]

The development of three dimensional geometries by electrospinning of nonwoven, bioresorbable PDLLA nanoand microfibers is a prerequisite for multimodal growth factor delivery by biohybrids. Electrospinning of 3D tubes is a formidable task since the deposited nanofibers on the rotating mandrel adhere so strongly that newly formed tubes cannot be removed. A specific electrospinning instrument setup with a "removable mandrel sleeve" technique facilitated the reproducible synthesis of tubes for guided bone and future vascular applications. It is shown, that this technique not only allows the preparation of tubes but also of self-supported 3D rings and sandwich panels which can be functionally doped by growth factors such as rhBMP-2 to biohybrids. [ABSTRACT FROM AUTHOR]

Biohybrid systems have been developed to better understand the design principles and coordination mechanisms of biological systems. We consider whether two functional regulatory features of the heart—mechanoelectrical signaling and automaticity—could be transferred to a synthetic analog of another fluid transport system: a swimming fish. By leveraging cardiac mechanoelectrical signaling, we recreated reciprocal contraction and relaxation in a muscular bilayer construct where each contraction occurs automatically as a response to the stretching of an antagonistic muscle pair. Further, to entrain this closed-loop actuation cycle, we engineered an electrically autonomous pacing node, which enhanced spontaneous contraction. The biohybrid fish equipped with intrinsic control strategies demonstrated self-sustained body–caudal fin swimming, highlighting the role of feedback mechanisms in muscular pumps such as the heart and muscles. [ABSTRACT FROM AUTHOR]

Adsorbate biohybrids for BMP-2 delivery based on electrospun PDLLA-nanofiber fleeces loaded with 0.6 μg/cm2 rhBMP-2COL (E. coli) strongly induced microvessel- like structures when incubated for 14 days in cocultures of human outgrowth endothelial cells (OEC) together with human primary osteoblasts (pOB). Higher loaded rhBMP-2COL biohybrids (4.6 μg/cm2) were low- to noninductive. Adsorbate biohybrids of rhBMP-2CHO (CHO cells) loaded with 1.0-6.0 μg/cm2 induced only a classic cobblestone- like growth pattern without any microvessels. Concentration- response experiments (7 days) indicate a binding affinity of rhBMP-2COL for microvessel induction in the picomolar range with nanomolar concentrations being non-inductive [ABSTRACT FROM AUTHOR]

Protein adsorption on solid surfaces is characterized by multivalence, binding-unit overlap, sequential adsorption, surface allosterics, lateral interactions and pronounced adsorption-desorption hysteresis, giving rise to the sequential, hystallosteric, adsorption model ("SHA model"). Adsorption isotherms of fibrinogen on a titanium miniplates and of the growth factors rhBMP-2 and rhVEGF165 on PDLLA nanofiber fleeces are presented. Controversial Langmuir type isotherms of fibrinogen and rhVEGF165 can be understood on the basis of singular long-lived metastable states central to the SHA-model. [ABSTRACT FROM AUTHOR]

Endogenous neurogenesis in stroke is insufficient to replace the lost brain tissue, largely due to the lack of a proper biological structure to let new cells dwell in the damaged area. We hypothesized that scaffolds made of hyaluronic acid (HA) biomaterials (BM) could provide a suitable environment to home not only new neurons, but also vessels, glia and neurofilaments. Further, the addition of exogenous cells, such as adipose stem cells (ASC) could increase this effect. Athymic mice were randomly assigned to a one of four group: stroke alone, stroke and implantation of BM, stroke and implantation of BM with ASC, and sham operated animals. Stroke model consisted of middle cerebral artery thrombosis with FeCl3. After 30 days, animals underwent magnetic resonance imaging (MRI) and were sacrificed. Proliferation and neurogenesis increased at the subventricular zone ipsilateral to the ventricle and neuroblasts, glial, and endothelial cells forming capillaries were seen inside the BM. Those effects increased when ASC were added, while there was less inflammatory reaction. Three‐dimensional scaffolds made of HA are able to home newly formed neurons, glia, and endothelial cells permitting the growth neurofilaments inside them. The addition of ASC increase these effects and decrease the inflammatory reaction to the implant. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1598–1606, 2019. [ABSTRACT FROM AUTHOR]

Pumps are critical life-sustaining components for all animals. At the earliest stages of life, the tubular embryonic heart works as a valveless pump capable of generating unidirectional blood flow. Inspired by this elementary pump, we developed an example of a biohybrid valveless pump-bot powered by engineered skeletal muscle. Our pump-bot consists of a soft hydrogel tube connected at both ends to a stiffer polydimethylsiloxane (PDMS) scaffold, creating an impedance mismatch. A contractile muscle ring wraps around the hydrogel tube at an off-center location, squeezing the tube with or without buckling it locally. Cyclic muscle contractions, spontaneous or electrically stimulated, further squeeze the tube, resulting in elastic waves that propagate along the soft tube and get reflected back at the soft/stiff tube boundaries. Asymmetric placement of muscle ring results in a time delay between the wave arrivals, thus establishing a net unidirectional fluid flow irrespective of whether the tube is buckled or not. Flow rates of up to 22.5 µL/min are achieved by the present pump-bot, which are at least three orders of magnitude higher than those from cardiomyocytepowered valve pumps of similar size. Owning to its simple geometry, robustness, ease of fabrication, and high pumping performance, our pump-bot is particularly well-suited for a wide range of biomedical applications in microfluidics, drug delivery, biomedical devices, cardiovascular pumping system, and more. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Polymer conjugation strategy was studied to compare the impact on the biohybrids activity. • The grafting-from reaction conditions resulted in deactivated DNase I. • Only grafting polymers to DNase I yielded active conjugates. • Polymer hybrids with DNase I rendered the protein stable to heat denaturation. Abstract Protein polymer hybrids play an increasingly important role in therapeutics and biocatalysis. Synthesis of these biohybrids can be achieved by either the grafting-from or grafting-to strategy and are generally thought to be interchangeable. Therefore, when choosing between these two strategies the decision is usually based on polymer accessibility and purification preference. However, in this study, we demonstrated that the choice of the polymer ligation strategy played a significant role in the stability and bioactivity of the final hybrid. Our goal was to prepare a thermally stable DNase I polymer hybrid by utilizing either synthetic strategies. We found that the grafting-from strategy using reversible addition-fragmentation chain transfer polymerization (RAFT) or atom transfer radical polymerization (ATRP) yielded DNase I biohybrids with no activity. Control reactions were used to demonstrate inherent protein deactivation caused by the grafting-from conditions for either ATRP or RAFT polymerization. The grafting-to method yielded active and thermally stable DNase I biohybrids. [ABSTRACT FROM AUTHOR]

Biohybrid robots are attracting attention as promising candidates to enhance robot applicability to studies on biological designs and in vitro construction of biological dynamic systems. Rapid progress in biohybrid robots with skeletal muscle tissues formed on a flexible substrate has enabled various types of locomotion powered by muscle tissue. However, it has been difficult to achieve high levels of both large and long-term actuations of the skeletal muscle tissues because of their spontaneous shrinkage through the course of the tissue culture. To overcome this limitation, we adapted the concept of biological systems and developed a biohybrid robot actuated by an antagonistic pair of skeletal muscle tissues. Our robot achieved large actuation (~90° of rotation of a joint) by selective contractions of the skeletal muscle tissues and a long lifetime (~1 week) by balancing tensions of the antagonistic tissues to prevent the spontaneous shrinkage. As a demonstration, we showed that our biohybrid robots allowed a pick-and-place manipulation of objects. This research may provide a platform to exceed the limitations of design in conventional biohybrid robots and replicate various lifelike movements. [ABSTRACT FROM AUTHOR]

The creation of in vitro functional hepatic tissue simulating micro-environmental niche of native liver is a keen area of research due to its demand in bioartificial liver (BAL) and cell-based tissue engineering. Here, we investigated the potential of novel blend (BA) silk scaffold fabricated by blending mulberry ( Bombyx mori , BM) silk fibroin with cell adhesion motif (RGD) rich non-mulberry ( Antheraea assamensis , AA) silk fibroin, in generating a functional liver construct. Three-dimensional (3D) porous silk scaffolds (BM, AA and BA) were physico-chemically characterized and functionally evaluated using human hepatocarcinoma cells (HepG2) and primary neonatal rat hepatocytes. The growth and distribution of hepatocytes within the scaffolds were tracked by FESEM, alamar blue proliferation assay and live/dead staining. Hemocompatible BA scaffolds supported the formation of high density hepatocyte clusters, facilitating cell-matrix and cell-cell interactions. Blend scaffolds evinced enhanced liver-specific functions of cultured hepatocytes in terms of albumin synthesis, urea synthesis and cytochrome P450 enzyme activity over 21 days. Subcutaneous implantation of scaffolds demonstrated minimal macrophage infiltration in blend scaffolds. These findings substantiate that the integral property of blend (BA) scaffold offers a befitting environment by influencing spheroidal growth of hepatocytes with enhanced biological activity. Collectively, the present study provides a new 3D bio-matrix niche for growing functional liver cells that would have future prospects in BAL as well as regenerative medicine. Statement of Significance An end stage liver disease called cirrhosis perturbs the self-healing ability and physiological functions of liver. Due to the scarcity of healthy donors, a functional in vitro hepatic construct retaining the liver-specific functions is in great demand for its prospects in bioartificial liver (BAL) and cell-based tissue engineering. Physicochemical attributes of a matrix influence the behavior of cultured hepatocytes in terms of attachment, morphology and functionality. Mulberry and non-mulberry silk fibroin presents unique amino acid sequence with difference in hydrophobicity and crystallinity. Considering this, the present study focuses on the development of a suitable three-dimensional (3D) bioactive matrix incorporating both mulberry silk fibroin and cell adhesion motif (RGD) rich non-mulberry silk fibroin. Porous silk blend scaffolds facilitated the formation of hepatocyte clusters with enhanced liver-specific functions emphasizing both cell-cell and cell-matrix interactions. Hemocompatibility and integral property of blend scaffolds offers a biological niche for seeding functional liver cells that would have future prospects in biohybrid devices. [ABSTRACT FROM AUTHOR]

The ultimate goal for skin tissue engineering is to regenerate skin lesions to allow the full restoration of morphological and functional properties as what they were before injury. To this end, we have assembled a new prototype of a biomimetic human umbilical cord adult mesenchymal stem cell (hUCMS)/fibrin-based scaffold. We have fully characterized the proposed dermal equivalent (DE) in vitro, to assess morphological, functional, and biological properties of the encased cells. We transplanted DE subcutaneously into immunocompetent rodents, to verify its full biocompatibility. Finally, we studied DE graft effects on full-thickness wounds, in immunocompetent mice to demonstrate its capability to drive the healing process in the absence of significant scarring tissue. The excellent outcome of these in vivo studies fuels hope that this new approach, based on a biohybrid DE, may be applied to the operative treatment of skin lesions (i.e., diabetic foot ulcers and burns) in man. [ABSTRACT FROM AUTHOR]

Bacterial biohybrids use the energy of bacteria to manipulate synthetic materials with the goal of solving biomedical problems at the micro- and nanoscale. We explore current in vitro studies of bacterial biohybrids, the first attempts at in vivo biohybrid research, and problems to be addressed for the future. [ABSTRACT FROM AUTHOR]

Mixing societies of natural and artificial systems can provide interesting and potentially fruitful research targets. Here we mix robotic setups and natural plants in order to steer the motion behavior of plants while growing. The robotic setup uses a camera to observe the plant and uses a pair of light sources to trigger phototropic response, steering the plant to user-defined targets. An evolutionary robotic approach is used to design a controller for the setup. Initially, preliminary experiments are performed with a simple predetermined controller and a growing bean plant. The plant behavior in response to the simple controller is captured by image processing, and a model of the plant tip dynamics is developed. The model is used in simulation to evolve a robot controller that steers the plant tip such that it follows a number of randomly generated target points. Finally, we test the simulation-evolved controller in the real setup controlling a natural bean plant. The results demonstrate a successful crossing of the reality gap in the setup. The success of the approach allows for future extensions to more complex tasks including control of the shape of plants and pattern formation in multiple plant setups. [ABSTRACT FROM AUTHOR]

Injectable scaffolds for cardiac tissue regeneration are a promising therapeutic approach for progressive heart failure following myocardial infarction (MI). Their major advantage lies in their delivery modality that is considered minimally invasive due to their direct injection into the myocardium. Biomaterials comprising such scaffolds should mimic the cardiac tissue in terms of composition, structure, mechanical support, and most importantly, bioactivity. Nonetheless, natural biomaterial-based gels may suffer from limited mechanical strength, which often fail to provide the long-term support required by the heart for contraction and relaxation. Here we present newly-developed injectable scaffolds, which are based on solubilized decellularized porcine cardiac extracellular matrix (pcECM) cross-linked with genipin alone or engineered with different amounts of chitosan to better control the gel’s mechanical properties while still leveraging the ECM biological activity. We demonstrate that these new biohybrid materials are naturally remodeled by mesenchymal stem cells, while supporting high viabilities and affecting cell morphology and organization. They exhibit neither in vitro nor in vivo immunogenicity. Most importantly, their application in treating acute and long term chronic MI in rat models clearly demonstrates the significant therapeutic potential of these gels in the long-term (12 weeks post MI). The pcECM-based gels enable not only preservation, but also improvement in cardiac function eight weeks post treatment, as measured using echocardiography as well as hemodynamics. Infiltration of progenitor cells into the gels highlights the possible biological remodeling properties of the ECM-based platform. Statement of Significance This work describes the development of new injectable scaffolds for cardiac tissue regeneration that are based on solubilized porcine cardiac extracellular matrix (ECM), combined with natural biomaterials: genipin, and chitosan. The design of such scaffolds aims at leveraging the natural bioactivity and unique structure of cardiac ECM, while overcoming its limited mechanical strength, which may fail to provide the long-term support required for heart contraction and relaxation. Here, we present a biocompatible gel-platform with custom-tailored mechanical properties that significantly improve cardiac function when injected into rat hearts following acute and chronic myocardial infarction. We clearly demonstrate the substantial therapeutic potential of these scaffolds, which not only preserved heart functions but also alleviated MI damage, even after the formation of a mature scar tissue. [ABSTRACT FROM AUTHOR]

Intrahepatic transplantation of allogeneic pancreatic islets offers a promising therapy for type 1 diabetes. However, long-term insulin independency is often not achieved due to severe islet loss shortly after transplantation. To improve islet survival and function, extrahepatic biomaterial-assisted transplantation of pancreatic islets to alternative sites has been suggested. Herein, we present macroporous, star-shaped poly(ethylene glycol) (starPEG)-heparin cryogel scaffolds, covalently modified with adhesion peptides, for the housing of pancreatic islets in three-dimensional (3D) co-culture with adherent mesenchymal stromal cells (MSC) as accessory cells. The implantable biohybrid scaffolds provide efficient transport properties, mechanical protection, and a supportive extracellular environment as a desirable niche for the islets. MSC colonized the cryogel scaffolds and produced extracellular matrix proteins that are important components of the natural islet microenvironment known to facilitate matrix-cell interactions and to prevent cellular stress. Islets survived the seeding procedure into the cryogel scaffolds and secreted insulin after glucose stimulation in vitro . In a rodent model, intact islets and MSC could be visualized within the scaffolds seven days after subcutaneous transplantation. Overall, this demonstrates the potential of customized macroporous starPEG-heparin cryogel scaffolds in combination with MSC to serve as a multifunctional islet supportive carrier for transplantation applications. Statement of Significance Diabetes results in the insufficient production of insulin by the pancreatic β-cells in the islets of Langerhans. Transplantation of pancreatic islets offers valuable options for treating the disease; however, many transplanted islets often do not survive the transplantation or die shortly thereafter. Co-transplanted, supporting cells and biomaterials can be instrumental for improving islet survival, function and protection from the immune system. In the present study, islet supportive hydrogel sponges were explored for the co-transplantation of islets and mesenchymal stromal cells. Survival and continued function of the supported islets were demonstrated in vitro . The in vivo feasibility of the approach was shown by transplantation in a mouse model. [ABSTRACT FROM AUTHOR]

In this study, new techniques for approximating the contractile properties of cells in biohybrid devices using Finite Element Analysis (FEA) have been investigated. Many current techniques for modeling biohybrid devices use individual cell forces to simulate the cellular contraction. However, such techniques result in long simulation runtimes. In this study we investigated the effect of the use of thermal contraction on simulation runtime. The thermal contraction model was significantly faster than models using individual cell forces, making it beneficial for rapidly designing or optimizing devices. Three techniques, Stoney׳s Approximation, a Modified Stoney׳s Approximation, and a Thermostat Model, were explored for calibrating thermal expansion/contraction parameters (TECPs) needed to simulate cellular contraction using thermal contraction. The TECP values were calibrated by using published data on the deflections of muscular thin films (MTFs). Using these techniques, TECP values that suitably approximate experimental deflections can be determined by using experimental data obtained from cardiomyocyte MTFs. Furthermore, a sensitivity analysis was performed in order to investigate the contribution of individual variables, such as elastic modulus and layer thickness, to the final calibrated TECP for each calibration technique. Additionally, the TECP values are applicable to other types of biohybrid devices. Two non-MTF models were simulated based on devices reported in the existing literature. [ABSTRACT FROM AUTHOR]

Future technologies aiming at restoring and enhancing organs function will intimately rely on near-physiological and energy-efficient communication between living and artificial biomimetic systems. Interfacing brain-inspired devices with the real brain is at the forefront of such emerging field, with the term “neurobiohybrids” indicating all those systems where such interaction is established. We argue that achieving a “high-level” communication and functional synergy between natural and artificial neuronal networks in vivo, will allow the development of a heterogeneous world of neurobiohybrids, which will include “living robots” but will also embrace “intelligent” neuroprostheses for augmentation of brain function. The societal and economical impact of intelligent neuroprostheses is likely to be potentially strong, as they will offer novel therapeutic perspectives for a number of diseases, and going beyond classical pharmaceutical schemes. However, they will unavoidably raise fundamental ethical questions on the intermingling between man and machine and more specifically, on how deeply it should be allowed that brain processing is affected by implanted “intelligent” artificial systems. Following this perspective, we provide the reader with insights on ongoing developments and trends in the field of neurobiohybrids. We address the topic also from a “community building” perspective, showing through a quantitative bibliographic analysis, how scientists working on the engineering of brain-inspired devices and brain-machine interfaces are increasing their interactions. We foresee that such trend preludes to a formidable technological and scientific revolution in brain-machine communication and to the opening of new avenues for restoring or even augmenting brain function for therapeutic purposes. [ABSTRACT FROM AUTHOR]

Inspired by the relatively simple morphological blueprint provided by batoid fish such as stingrays and skates, we created a biohybrid system that enables an artificial animal—a tissue-engineered ray—to swim and phototactically follow a light cue. By patterning dissociated rat cardiomyocytes on an elastomeric body enclosing a microfabricated gold skeleton, we replicated fish morphology at 1/10 scale and captured basic fin deflection patterns of batoid fish. Optogenetics allows for phototactic guidance, steering, and turning maneuvers. Optical stimulation induced sequential muscle activation via serpentinepatterned muscle circuits, leading to coordinated undulatory swimming. The speed and direction of the ray was controlled by modulating light frequency and by independently eliciting right and left fins, allowing the biohybrid machine to maneuver through an obstacle course [ABSTRACT FROM AUTHOR]

Working towards establishing a biohybrid lung with optimized hemocompatibility, this study analyzed the feasibility of establishing flow-resistant endothelium on heparin/albumin coated poly-4-methly-1-pentene hollow fiber gas exchange membranes (PMP-HFs). The seeding efficiency and proliferation of human cord blood derived endothelial cells (HCBEC) on PMP-HFs were analyzed under static conditions by WST-8 cell proliferation assay and fluorescence microscopy. The HCBEC monolayer integrity under different flow conditions was also assessed. Endothelial-specific phenotype verification, expression activation levels and thrombogenic state markers were quantified by real-time RT-PCR for cell-to-PMP-HF contact under static and dynamic conditions. The results demonstrated the feasibility of establishing a viable, confluent, and flow-resistant endothelial monolayer on the blood-contact surface of PMP-HFs, which maintained a physiological response to TNFα-stimulation and flow conditions. The endothelial phenotype, expression levels of adhesion molecules and thrombogenic state markers were unaffected by cell-to-PMP-HFs contact. These results represent a significant step towards establishing a biohybrid lung. [ABSTRACT FROM AUTHOR]

This paper describes an original bio-design of organic/inorganic hybrid architectures containing biomimetic membranes and celandine–nanoAg for different bioapplications. A simple, time efficient, low-cost and ecofriendly bottom-up procedure was used to build for the first time, celandine/nanoAg-based hybrids. Dipalmitoyl phosphatidylcholine bio-inspired lipid bilayers were obtained by thin film hydration method. Chlorophyll a inserted into these liposomes was used as a spectral marker to detect the changes occurred in the artificial membranes. For the first time, silver nanoparticles were eco-synthesized using an aqueous extract of celandine ( Chelidonium majus L.). The physical stability of the samples was evaluated in terms of zeta potential. Chlorophyll a photonic properties (based on UV–Vis absorption and emission spectra) were used to monitor the synthesis of silver nanoparticles and of bio-based hybrids. The size of samples was monitored by Dynamic Light Scattering measurements and the morphological aspects were provided by Atomic Force Microscopy analysis. The obtained silver-based biohybrids exhibited high antioxidant activity (98.48%) and strong antimicrobial properties against Escherichia coli ATCC 8738 (offering an inhibition zone of 51 mm diameter) and presented good physical stability (zeta potential reached the value of −30.7 mV) as compared to phyto-nanoAg alone. [ABSTRACT FROM AUTHOR]

This study describes the design a novel microbioreactor for the biocatalysed asymmetric synthesis of polyhydroxylated compounds. The bioreactor was elaborated by a hierarchical assembly of a recombinant fructose-6-phosphate aldolase (FSA wt ), layered double hydroxides (LDH) nanoplatelets and polysaccharide beads. Various polysaccharides were tested to encapsulate FSA wt and pre-immobilised FSA wt in LDH (FSA wt @Mg 2 Al-LDH). ι-Carrageenan appears as the most suitable candidate to prepare biohybrid beads. The retained activities in ι-carrageenan beads were measured for both free FSA wt and immobilised FSA wt revealing a 3 fold higher activity in favour of the pre-immobilised FSA. This result was probably due to a positive interaction between the negatively charged polysaccharide and the positively charged LDH layers. The catalytic activity, the recyclability and the storage of the beads were studied in addition to the leakage of FSA wt activity from beads. Nanostructuration of both FSA wt /ι-carr and FSA wt @Mg 2 Al-LDH/ι-carr was investigated by structural and textural characterization techniques. [ABSTRACT FROM AUTHOR]

An Enzyme Linked Immunosorbent Assay (ELISA) with the ability to detect some of the most widely used penicillins such as penicillin G, amoxicillin and ampicillin has been developed and validated in milk samples to ensure food safety. The assay can achieve limits of detection (0.1 μg L −1 ) much lower than the MRLs (Maximum Residue Levels) established by the EU (4 μg L −1 ). The procedure allows the analysis of the samples with a simple and fast treatment of the matrix with biohybrid magnetic particles to hydrolyze the β-lactam ring. A new immunizing hapten has been described and the polyclonal antibodies produced showed high specificity for open ring penicillins and no cross-reactivity with other antibiotic families. The assay has been designed to detect simultaneously both penicillin species in milk, the antibiotics and their hydrolyzed forms. Concerning the open-ringed forms their detection in food samples will be especially important in the next few years because of the illegal use of penicillinase enzymes by farmers to mask the real concentrations of β-lactams in milk. [ABSTRACT FROM AUTHOR]

Automated control of blood glucose in patients with type-1 diabetes has not yet been fully implemented. The aim of this study was to design and clinically evaluate a system that integrates a control algorithm with off-the-shelf subcutaneous sensors and pumps to automate the delivery of the hormones glucagon and insulin in response to continuous glucose sensor measurements. The automated component of the system runs an adaptive proportional derivative control algorithm which determines hormone delivery rates based on the sensed glucose measurements and the meal announcements by the patient. We provide details about the system design and the control algorithm, which incorporates both a fading memory proportional derivative controller (FMPD) and an adaptive system for estimating changing sensitivity to insulin based on a glucoregulatory model of insulin action. For an inpatient study carried out in eight subjects using Dexcom SEVEN PLUS sensors, prestudy HbA1c averaged 7.6, which translates to an estimated average glucose of 171 mg/dL. In contrast, during use of the automated system, after initial stabilization, glucose averaged 145 mg/dL and subjects were kept within the euglycemic range (between 70 and 180 mg/dL) for 73.1% of the time, indicating improved glycemic control. A further study on five additional subjects in which we used a newer and more reliable glucose sensor (Dexcom G4 PLATINUM) and made improvements to the insulin and glucagon pump communication system resulted in elimination of hypoglycemic events. For this G4 study, the system was able to maintain subjects’ glucose levels within the near-euglycemic range for 71.6% of the study duration and the mean venous glucose level was 151 mg/dL. [ABSTRACT FROM PUBLISHER]

Variability in Human Leukocyte Antigens (HLA) remains a hurdle to the application of allogeneic cellular products. Due to insufficient autologous endothelial cell harvesting for the biohybrid lung, allogeneic human cord blood derived endothelial cells (HCBEC) were used for the endothelialization of poly-4-methyl-1-pentene (PMP) gas exchange membranes. Therefore, HLA class I expression was silenced stably in HCBECs to prevent rejection. The capacity of HLA class I-silenced HCBEC to abrogate allogeneic immune responses, their functional properties and suitability for endothelialization of PMP membranes were investigated. Delivery of β2-microglobulin (β2m)-specific shRNAs reduced β2m mRNA levels by up to 90% and caused a knockdown of HLA class I expression by up to 85%. HLA-silenced HCBEC abrogated T-cell responses and escaped antibody-mediated complement-dependent cytotoxicity. The EC phenotype and cytokine secretion profiles between HLA-expressing or -silenced HCBEC remained unaltered. EC specific activation (e.g. ICAM) and thrombogenic markers (e.g. thrombomodulin) remained unaffected by HLA-silencing, but their expression was upregulated by TNFα-stimulation. Furthermore, HLA-silenced HCBECs showed high proliferation rates and built an EC monolayer onto PMP membranes. This study represents a new therapeutic concept in the field of cell and organ transplantation and may bring the bioartificial lung as an alternative to lung transplantation closer to reality. [ABSTRACT FROM AUTHOR]

Bio-hybrid artificial organs are an attractive concept to restore organ function through precise biological cooperation with surrounding tissues in vivo. However, in bio-hybrid artificial organs, an artificial organ with fibrous connective tissues, including muscles, tendons and ligaments, has not been developed. Here, we have enveloped with embryonic dental follicle tissue around a HA-coated dental implant, and transplanted into the lower first molar region of a murine tooth-loss model. We successfully developed a novel fibrous connected tooth implant using a HA-coated dental implant and dental follicle stem cells as a bio-hybrid organ. This bio-hybrid implant restored physiological functions, including bone remodelling, regeneration of severe bone-defect and responsiveness to noxious stimuli, through regeneration with periodontal tissues, such as periodontal ligament and cementum. Thus, this study represents the potential for a next-generation bio-hybrid implant for tooth loss as a future bio-hybrid artificial organ replacement therapy. [ABSTRACT FROM AUTHOR]

Abstract: Noncovalent entities (consisting of liposomes, phyto-nanosilver and carbon nanotubes) with interesting properties were constructed by a “green” bottom-up method. Phytosynthesis of silver nanoparticles using the Mentha piperita extract combines the benefits of this herb with the interesting properties of silver. The obtained silver-based biohybrids showed antioxidant and antimicrobial properties that have been considerable improved in the presence of carbon nanotubes. Thus the eco-designed bioconstructs consisting of cholesterol-containing liposomes, phytonanosilver and carbon nanotubes exhibited high antioxidant activity (AA=90.8%) and have been shown to be strong biocides offering inhibition zone of 25mm against Escherichia coli and 23mm against Staphylococcus aureus and Enterococcus faecalis. [Copyright &y& Elsevier]

This paper presents a modeling and experimental framework to characterize the Chemotaxis of Serratia marcescens (S. marcescens) relying on two-dimensional and three-dimensional tracking of individual bacteria. Previous studies mainly characterized bacterial Chemotaxis based on population density analysis. Instead, this study focuses on single-cell tracking and measuring the chemotactic drift velocity Vc from the biased tumble rate of individual bacteria on exposure to a concentration gradient of L-aspartate. The chemotactic response of 5. marcescens is quantified over a range of concentration gradients ( 10-3 to 5 mM/mm) and average concentrations (0.5 x 10~1 to 2.5 mM). Through the analysis of a large number of bacterial swimming trajectories, the tumble rate is found to have a significant bias with respect to the swimming direction. We also verify the relative gradient sensing mechanism in the Chemotaxis of S. marcescens by measuring the change of Vc with the average concentration and the gradient. The applied full pathway model with fitted parameters matches the experimental data. Finally, we show that our measurements based on individual bacteria lead to the determination of the motility coefficient μ (7.25 x 10-6 cm²/s) of a population. The experimental characterization and simulation results for the Chemotaxis of this bacterial species contribute towards using S. marcescens in chemically controlled biohybrid systems. [ABSTRACT FROM AUTHOR]

The aim of this work was to investigate the suitability of electrospinning for biodrug delivery and to develop an electrospinning-based method to produce vaginal drug delivery systems. Lactobacillus acidophilus bacteria were encapsulated into nanofibers of three different polymers (polyvinyl alcohol and polyvinylpyrrolidone with two different molar masses). Shelf life of the bacteria could be enhanced by the exclusion of water and by preparing a solid dosage form, which is an advantageous and patient-friendly way of administration. The formulations were stored at -20, 7 and 25°C, respectively. Viability testing showed that the nanofibers can provide long term stability for huge amounts of living bacteria if they are kept at (or below) 7°C. Furthermore, all kinds of nanowebs prepared in this work dissolved instantly when they got in contact with water, thus the developed biohybrid nanowebs can provide new potential ways for curing bacterial vaginosis. [ABSTRACT FROM AUTHOR]

Despite attempts in a number of studies to utilize muscle tissue and cells as microactuators, all of the biohybrid microdevices have been operable only in the culture medium and none have worked in air due to the dry environment. This paper demonstrates an atmospheric-operable bioactuator (AOB) fabricated by packaging an insect dorsal vessel (DV) tissue with a small amount of culture medium inside a capsule. The AOB, consisting of microtweezers and the capsule, was designed based on a structural simulation that took into account the capillary effect. The base part of the microtweezers was deformed by spontaneous contractions of the DV tissue in the medium inside the capsule, by which the front edges of the microtweezer arms projecting above the medium surface were also deformed. First, we confirmed in the medium that the DV tissue was able to reduce the gap between the arm tips of the microtweezers. After taking the AOB out of the medium, as we expected, the AOB continued to work in air at room temperature. The gap reduction in air became larger than the one in the medium due to a surface tension effect, which was consistent with the simulation findings on the surface tension by the phase-field method. Second, we demonstrated that the AOB deformed a thin-wall ring placed between its tips in air. Third, we measured the lifetime of the AOB. The AOB kept working for around 40 minutes in air, but eventually stopped due to medium evaporation. As the evaporation progressed, the microtweezers were pressed onto the capsule wall by the surface tension and opening and closing stopped. Finally, we attempted to prevent the medium from evaporating by pouring liquid paraffin (l-paraffin) over the medium after lipophilic coating of the capsule. As a result, we succeeded in prolonging the AOB lifetime to more than five days. In this study, we demonstrated the significant potential of insect muscle tissue and cells as a bioactuator in air and at room temperature. By integrating insect tissue and cells not only into a microspace but also onto a substrate, we expect to realize a biohybrid MEMS device with various functions in the near future. [ABSTRACT FROM AUTHOR]

The association of stem cells with tissue-engineered scaffolds constitutes an attractive approach for the repair of myocardial tissue with positive effects to avoid ventricular chamber dilatation, which changes from a natural elliptical to spherical shape in heart failure patients. Biohybrid scaffolds using nanomaterials combined with stem cells emerge as new therapeutic tool for the creation of 'bioartificial myocardium' and 'cardiac wrap bioprostheses' for myocardial regeneration and ventricular support. Biohybrids are created introducing stem cells and self-assembling peptide nanofibers inside a porous elastomeric membrane, forming cell niches. Our studies lead to the creation of semi-degradable 'ventricular support bioprostheses' for adaptative LV and/or RV wrapping, designed with the concept of 'helical myocardial bands'. The goal is to restore LV elliptical shape, and contribute to systolic contraction and diastolic filling (suction mechanism). Cardiac wrapping with ventricular bioprostheses may reduce the risk of heart failure progression and the indication for heart transplantation. [ABSTRACT FROM AUTHOR]

In processive catalysis, a catalyst binds to a substrate and remains bound as it performs several consecutive reactions, as exemplified by DNA polymerases. Processivity is essential in nature and is often mediated by a clamp-like structure that physically tethers the catalyst to its (polymeric) template. In the case of the bacteriophage T4 replisome, a dedicated clamp protein acts as a processivity mediator by encircling DNA and subsequently recruiting its polymerase. Here we use this DNA-binding protein to construct a biohybrid catalyst. Conjugation of the clamp protein to a chemical catalyst with sequence-specific oxidation behaviour formed a catalytic clamp that can be loaded onto a DNA plasmid. The catalytic activity of the biohybrid catalyst was visualized using a procedure based on an atomic force microscopy method that detects and spatially locates oxidized sites in DNA. Varying the experimental conditions enabled switching between processive and distributive catalysis and influencing the sliding direction of this rotaxane-like catalyst. [ABSTRACT FROM AUTHOR]

Abstract: Complex coacervation in exfoliated Laponite nanoplatelets and fish gelatin mixtures was studied as a function of four key parameters: pH, ionic strength, gelatin/Laponite weight ratio, and total weight. The aim was to understand how these parameters influence phase separation kinetics, composition, internal structure, and viscoelastic properties of coacervates. By careful experimental design and turbidity measurements, the optimum conditions for coacervation were obtained. Thermogravimetric analysis revealed an outstanding heat-resistance for gelatin/nanoclay coacervates. Finally, structure of the coacervate phase was characterized by oscillatory shear experiments. The storage modulus data was observed to follow a power-law behavior and it was confirmed that under the optimum conditions, the coacervate phase was dense and structured with a characteristic length scale (ξ rheol) of ∼8.25nm. Regardless of the physicochemical condition at which complexation occurred, it was shown that the equilibrium structure of the coacervates is related to the kinetics of intermediate and late stages of phase separation; as the new defined kinetics parameter K was observed to be inversely proportional to ξ rheol that quantifies the compactness of the coacervate networks. [Copyright &y& Elsevier]

Cutaneous wounds are often superinfected during the healing process and this leads to prolonged convalescence and discomfort. Usage of suitable wound dressings is very important for an appropriate wound care leading to a correct healing. The aim of this study was to demonstrate the influence of a nano-coated wound dressing (WD) on Candida albicans colonization rate and biofilm formation. The modified WD was achieved by submerging the dressing pieces into a nanofluid composed of functionalized magnetite nanoparticles and Satureja hortensis (SO) essential oil (EO). Chemical composition of the EO was established by GC-MS. The fabricated nanostructure was characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Differential Thermal Analysis (DTA) and Fourier Transform-Infrared Spectroscopy (FT-IR). The analysis of the colonized surfaces using (Scanning Electron Microscopy) SEM revealed that C. albicans adherence and subsequent biofilm development are strongly inhibited on the surface of wound dressing fibers coated with the obtained nanofluid, comparing with regular uncoated materials. The results were also confirmed by the assay of the viable fungal cells embedded in the biofilm. Our data demonstrate that the obtained phytonanocoating improve the resistance of wound dressing surface to C. albicans colonization, which is often an etiological cause of local infections, impairing the appropriate wound healing. [ABSTRACT FROM AUTHOR]

Allblood vessels are lined with a quiescent endothelium, whichaids in regulating regular blood flow and avoiding thrombus formation.Current attempts at replacing diseased blood vessels frequently faildue to the intrinsic thrombogenicity of the materials used as vasculargrafts. In extending our previous work where we introduced a new candidatescaffolds for vascular grafts electrospun from a blend solution ofPLGA, gelatin, and elastin (PGE), this study aimed to evaluate thepotential of PGE scaffolds to support nonthrombogenic monolayers ofprimary isolates of human aortic endothelial cells (HAECs), as assessedby a combination of biochemical, molecular, and bioinformatics-basedanalyses. After 24 h of culture on 3-D fibrous PGE scaffolds, HAECsformed a confluent, nonthrombogenic, and physiologically competentmonolayer, as assessed by tissue factor (TF) gene expression and proteinactivity assays. The levels of TF mRNA/protein activity in HAECs grownon PGE scaffolds were similar to those on gelatin or collagen IV-coated2-D surfaces. In addition, bioinformatics-based analysis of a focusedmicroarray containing 84 ECM-related cDNA probes demonstrated thatHAECs essentially expressed a histotypic ECM-related “transcriptome”on PGE scaffolds, where cells were more quiescent than cells culturedon 2-D coverslips coated with gelatin (a well-known “inert”substrate for conventional EC culture), but less so than on 2-D PGEfilms. These data suggest an important role for nanorough substrates(PGE films) in passivating endothelial cells and confirm the crucialeffect of substrate composition in this process. Principal componentanalysis of microarray data on the above substrates (including collagenIV) implied that substrate composition plays a greater role than surfacetopography in affecting the endothelial ECM-related “transcriptome”.Taken together, our findings suggest that electrospun PGE scaffoldsare potentially suitable for application in small diameter vasculartissue engineering. [ABSTRACT FROM AUTHOR]

We describe the synthesis of the N-(2-seleninatoethyl) amide of N-Bocphenylalanine, serving here as a peptide model, and its reductive coupling reactions under mild conditions with unprotected thiouridine and glutathione. Selenosulfide products such as these comprise reversibly conjugated bio-components, and can potentially find uses as probes of biological function, such as enzyme inhibitors, delivery systems, or structural mimics. [ABSTRACT FROM AUTHOR]

The field of synthetic biology is rapidly expanding and has over the past years evolved from the development of simple gene networks to complex treatment-oriented circuits. The reprogramming of cell fate with open-loop or closed-loop synthetic control circuits along with biologically implemented logical functions have fostered applications spanning over a wide range of disciplines, including artificial insemination, personalized medicine and the treatment of cancer and metabolic disorders. In this review we describe several applications of interactive gene networks, a synthetic biology-based approach for future gene therapy, as well as the utilization of synthetic gene circuits as blueprints for the design of stimuli-responsive biohybrid materials. The recent progress in synthetic biology, including the rewiring of biosensing devices with the body''s endogenous network as well as novel therapeutic approaches originating from interdisciplinary work, generates numerous opportunities for future biomedical applications. [Copyright &y& Elsevier]

An abstract of the article "Biohybrid Tissue-Engineered Mitral Valve," by P. Mela and colleagues is presented.

Summary: Progress in biomimetic technology and the production of biohybrid techniques converges towards autonomous, more convincingly life-like systems and novel medical applications. Michael Gross reports. [ABSTRACT FROM AUTHOR]