Search

This paper introduces a broadband electromagnetic wave absorber with characteristics of polarization-independence and wide-angle stability based on resistive films with a three-dimensional (3D) configuration. The absorber consists of a 3D dielectric substrate array covered by a resistive film, which not only broadens the operation frequency band but also improves the absorption with large incidence angles. Simulated results indicate that the absorber achieves wideband absorption with over 90% absorptivity in the frequency range of 5.7–41.8 GHz, corresponding to a relative absorption bandwidth of 152%. Due to the high symmetry of the structure, the absorber is insensitive to polarization angles. Moreover, the presented design maintains wave absorption greater than 90% when incidence angle reaches 70∘ due to its 3D structure that ensures high absorption for wide incidence angles. The mechanism of this structure is investigated through surface current and power consumption distribution, while optimization parameters are analyzed for achieving the desired bandwidth. This absorber has the advantages of wide-band absorption and excellent stability under oblique incidence angles, making it potentially useful in applications such as electromagnetic shielding and energy harvesting. [ABSTRACT FROM AUTHOR]

The article examines vampires as "outsiders" using critical theorist Michel Foucault's concepts of biopolitics and governmentality to analyze their portrayal in over 30 Anglophone films. Topics include the vampire's relationship with history, the regulation of behavior within governance, and the role of screenwriting practices in shaping the genre.

Background: Tennis, the second-largest ball game in the world, has a particularly wide audience. To date, little research has been conducted on the biomechanics of female serves. Purpose: The purpose of this study was to capture the key moments by using 1,000 frames/s high-speed video analysis, to analyze the kinematics of the serving techniques of national athletes and provincial athletes, to determine the differences between the two levels of athletes, and to provide theoretical references for the improvement of scientific training level. Methods: Ten female athletes were selected as participants for this study, five of whom are national athletes, and the other are provincial athletes. Three-dimensional filming techniques were employed to capture videos of the first and second serve techniques. Simi Motion was applied to obtain the 3D kinematic data. Statistical analyses were performed using IBM SPSS Statistics 27.0, and Mann–Whitney U tests were conducted to determine differences between groups. Results: Significant differences in kinematics were found between national and provincial athletes. At the moment of the left knee's minimum flexion (T2), in the first serve, national athletes had a smaller shoulder-hip vertical plane angle (−18.281 ± 6.142° vs. −25.631 ± 3.497°; p = 0.047) and a larger hip vertical plane rotation angle (−9.378 ± 4.263° vs. −0.470 ± 4.724°; p = 0.047). In the second serve, national athletes had a smaller hip horizontal plane rotation angle (−1.720 ± 4.683° vs. 24.146 ± 24.014°; p = 0.047) but a larger hip vertical plane rotation angle (−11.553 ± 1.949° vs. −0.422 ± 4.958°; p = 0.009). At the moment of impact (T4), in the second serve, national athletes' batting position (0.296 ± 0.088 m vs. 0.446 ± 0.094 m; p = 0.047) was further back. Additionally, in the second serve, national athletes consistently had their body center of gravity further back at T2 (−0.106 ± 0.052 m vs. −0.018 ± 0.048 m; p = 0.028), T3 (0.002 ± 0.038 m vs. 0.132 ± 0.039 m; p = 0.009), and T4 (0.073 ± 0.050 m vs. 0.217 ± 0.034 m; p = 0.009). Conclusions: The results of this study indicated several significant kinematic differences between national and provincial athletes, these variations were noted in the shoulder, hip, and body center of gravity. In summary, for the overall first and second serves, it is recommended that national athletes increase the horizontal plane angle of the shoulders and hips at T2, whereas provincial athletes decrease the horizontal plane angle of the shoulder–hip. In addition, provincial athletes need to increase the vertical plane angle of the hip joint, so that the top of the hip can be increased more, and provincial athletes need to be careful not to have the center of gravity too far in front of the body at T2, T3, and T4, so that it can hit the ball at a higher position to increase the swing speed. [ABSTRACT FROM AUTHOR]

Metal halide perovskites hold a great promise for the development of electroluminescent and down‐conversion light‐emitting diodes (LEDs) owing to their easily tunable optical bandgaps, high photoluminescence quantum yields (PLQYs) and excellent color purity. 3D structural perovskites, valued for their high charge carrier transport capacity, have garnered much attention for high‐performance electroluminescent LEDs with low operating voltages. However, solution‐processed 3D perovskite films always suffer from the generation of defect‐induced trap states on the surfaces and at the grain boundaries, resulting in nonradiative recombination that detracts from the electroluminescence performance. Herein, a 3D/2D heterostructure is constructed to reduce the surface defects of CsPbIxBr3‐x based 3D perovskites by reconfiguring the surface of the 3D perovskite film with fluorine para‐substituted phenethylammonium iodine (p‐FPEAI). The analysis of charge carrier dynamics indicates a decrease in trap‐assisted nonradiative recombination and a notable increase in radiative recombination in the red 3D/2D perovskite films. Consequently, the cutting‐edge deep‐red LEDs with the resultant 3D/2D heterostructure perovskite as the emissive layer demonstrate a high external quantum efficiency of 22.2% and a very stable electroluminescence peak at 674 nm. The proposed p‐FPEAI‐assisted surface engineering is considered a resultful approach for advancing the development of high‐performance LEDs with perovskite heterojunction. [ABSTRACT FROM AUTHOR]

2D Ruddlesden–Popper (RP) layered metal‐halide perovskites have garnered significant interest due to their unique photoelectric properties and excellent stability. However, 2D perovskite films prepared via solution process generally exhibit multi‐quantum well structure with random well width distribution, which significantly impedes the carrier transportation. Herein, the synthesis of phase‐pure 2D (PEA)2FAPb2I7 (PEA = C8H11N, FA = CH4N2) perovskite thin films is reported in ambient environment achieved by suppressing the formation of the 3D perovskite phase. First, incorporation of MACl additive can effectively regulate the intermediate during crystallization, facilitating the formation of a metastable 3D MAxFA1‐xPbIyCl3‐y phase. Second, precise control of environmental humidity is employed to further inhibit the formation of α‐FAPbI3 phase. As a result, the perovskite intermediate composed of predominantly metastable 3D phase and 2D n = 2 phase is achieved, which is eventually transformed into 2D n = 2 perovskite during annealing, leading to markedly enhanced phase purity. Photoconductive‐type photodetectors based on the phase‐pure 2D RP perovskite films are fabricated, demonstrating a high detectivity of over 9.4 × 1012 Jones due to the improved carrier transportation. This study provides a comprehensive insight into the crystallization process of phase‐pure 2D perovskites. [ABSTRACT FROM AUTHOR]

Photocurable hybrid organic–inorganic composites were prepared via surface modification and 3D-patterned structures were fabricated by utilizing a continuous roll-to-roll manufacturing strategy. The surfaces of nanocrystals were engineered with a bifunctional ligand that is a 2-carboxyethyl acrylate, which possesses a carboxylic acid moiety at one end and an acrylate functionality moiety at the other end, yielding acrylate-functionalized nanocrystals. Micro-scale 3D patterns (protruding pyramidal shapes with each side measuring 147 μm) were continuously manufactured at a speed of 2.5 m/min via UV curing with a soft engraved mold. The surface properties of the functionalized nanocrystals and their UV curing condition were explored with Fourier transform infrared spectroscopy. The morphology of the 3D film was measured using scanning electron microscopy. A pin-on-disk tribometer measurement revealed an improved interaction between the functionalized particles and resins. [ABSTRACT FROM AUTHOR]

Metal halide perovskite (MHP) single crystals have shown great potential for high‐performance X‐ray detection due to their excellent carrier transport properties, tunable optical bandgap, and low‐temperature fabrication process. However, 3D perovskite single crystals suffer from severe ion migration, limiting the stability and sensitivity of X‐ray detectors. Herein, a lowing temperature crystallization (LTC) method for liquid‐phase epitaxial growth of 2D (PEA)2PbBr4 single‐crystal (SC) film on 3D CsPbBr3 substrate is demonstratedand a 2D/3D (PEA)2PbBr4/CsPbBr3 SC heterojunction is successfully constructed. The epitaxial (PEA)2PbBr4 layer shows a pronounced passivation effect on CsPbBr3 SC with a low trap density of 2.27 × 1010 cm−3. As such, the prepared 2D/3D heterojunction X‐ray detector achieves a record‐low detectable dose rate of 3.05 nGyair s−1 and high sensitivity of 34496 µC Gyair−1 cm−2 in 120 keV hard X‐ray detection, with a largely suppressed dark current drift of 2.49 × 10−4 nA cm−1 s−1 V−1. In addition, the heterojunction detector exhibits a self‐driven sensitivity of 44 µC Gyair−1 cm−2 due to its built‐in electric field. This work provides a simple strategy to controllable construct 2D/3D MHP SC heterojunction with excellent optoelectronic characteristic, which is conducive to promoting the development of MHP SC X‐ray detectors and other optoelectronic devices. [ABSTRACT FROM AUTHOR]

AbstractIn the present study, a combined experimental and numerical study is conducted to investigate the three-dimensional film cooling using forward and reverse injection over a corrugated surface. The experiments are performed to analyze the fluid flow and heat transfer phenomenon of the film cooling and to validate the numerical model under laboratory conditions (i.e. low temperature). Infrared thermography is used to estimate the temperature distribution and heat transfer coefficient. The numerical study is extended for a wide range of operating parameters at actual operating conditions of the afterburner liner. The outcome of numerical results shows promising results with reverse injection. The issue of kidney vortices with forward injection is mitigated with reverse injection. The reverse injection shows vortices in the plane of corrugation which improves the lateral spreading of coolant. A significant improvement in coolant coverage is reported over conventional forward injection, and the maximum improvement is 146%. Finally, a thermal stress analysis is conducted for film-cooled corrugated liners. The reverse injection shows promising results in terms of coolant coverage which reduces the overall temperature of the corrugated liner, hence thermal stress is significantly reduced. [ABSTRACT FROM AUTHOR]

The market demand for optoelectronic devices is increasing, leading to a need for low‐cost, high‐performance image sensors that can operate effectively in challenging environments such as darkness and fog. The emerging 2D transition metal dichalcogenides (TMDs) have garnered significant interest due to their exceptional optoelectronic properties and compatibility with silicon (Si) complementary metal oxide semiconductor (CMOS) technology. However, the large‐scale synthesis of TMD films and uniform preparation of photodiode arrays remain challenging. This paper reports a synthesis method for heteroepitaxial growth of 2H‐ molybdeum diyelluride (MoTe2) semiconducting films on 3D wafer‐level Si substrates. Using this method, arrays of 2H‐MoTe2/Si heterojunction photodiodes are prepared that demonstrate excellent uniformity and 100% device yield. The photodiodes exhibit satisfactory optoelectronic properties, including a small dark current maintained within a range of 1–3 nA and a maximum responsivity of 521.1 mAW−1 under near‐infrared light at 800 nm, with rise and fall times of less than 4 ms. To demonstrate the image‐sensing capabilities of the photodiode array under visible and near‐infrared (NIR) light illumination, a complete imaging system is designed.The MoTe2/Si photodiode arrays examined in this study offer a practical solution for integrating Si‐based readout circuits and photodetector arrays on a single chip. [ABSTRACT FROM AUTHOR]

The magnetoresistance and the Hall effect in transistor structures fabricated on films of the three-dimensional topological insulator (Bi,Sb)2(Te,Se)3 are studied. It is shown that the negative magnetoresistance at low magnetic field is described in terms of quantum corrections to the conductivity. The magnitude of these corrections depends on the gate voltage and increases when approaching the charge neutrality point. The Hall coefficient RH is nonlinear at low magnetic fields for any gate voltage, and the RH nonlinearity is the most pronounced at high negative gate voltages. At high fields, the slope of the magnetic field dependence of the Hall coefficient changes its sign at some gate voltage. [ABSTRACT FROM AUTHOR]

Flow characteristics of falling film around a horizontal elliptical tube under column flow were numerically investigated with the volume of fluid method. The three-dimensional film thickness distributions for elliptical tubes with three ellipticities and two arrangements (the major axis oriented vertically and the major axis oriented horizontally) were captured. This investigation also considered the effects of spray Reynolds number and contact angle on film thickness distribution. A comparison between elliptical tube and circular tube was also performed under typical spray Reynolds number of 258 and tube spacing of 20 mm. The results show that the tube shape has a great influence on the film thickness and flow behaviors: The liquid film formed outside the elliptical tube with the major axis oriented vertically is thinner and more uniform than that of the circular tube. Conversely, the film on the elliptical tube with the major axis oriented horizontally is thicker and more non-uniform than that of the circular tube. The increasing of Reynolds number generally increases film thickness, particularly in the crest region. Under incompletely wetted condition, the increasing of ellipticity decreases the liquid film coverage rate around the tube. In addition, a correlation for predicting the film thickness around elliptical tubes was proposed. [ABSTRACT FROM AUTHOR]

Filmmakers have established editing rules that aim to create cinematic continuity across filmic cuts, thereby avoiding viewers' confusion despite the abrupt changes in perception. In our present project, we investigated the impact of 3D films, as opposed to 2D films, on the salience of filmic cuts. We employed a cut detection task and focused on within-scene cuts with mere changes in camera perspective. We presented short video clips to our participants and asked them to press a key whenever they noticed a filmic cut, and we measured their cut detection performance. In addition to viewing mode (2D vs. 3D presentation), we considered cross-modal auditory influences (visual vs. audiovisual presentation) on the salience of filmic cuts. Participants detected cuts more accurately and faster when the video clips were presented in 3D rather than in 2D and when the video clips were presented only visually (without soundtrack) rather than audiovisually (with soundtrack). Both factors influenced cut detection performance independently. We conclude that while the regular audiovisual presentation of films supports the filmmakers' mission to achieve cinematic continuity, filmmakers should also be aware of the additional salience of cuts that comes with 3D film presentation and consider its effects on cinematic continuity. [ABSTRACT FROM AUTHOR]

Hybrid metamaterials (HMs) have attracted significant research interests owing to their unique optical properties and their ability to manipulate light‐matter interaction in a novel and controlled fashion beyond what any single material offers. Especially 3D HMs are of great interest due to their potential to provide advanced and precise control of such light‐matter interaction in nanoscale. In this study, a set of 3D HM nanocomposite films are designed by integrating three phases, i.e., vertically aligned CoFe2 nanosheets within the matrix of TiN/TaN multilayers. By increasing the number of TiN/TaN multilayers from 2 to 19, a high degree of tunability in optical property has been demonstrated, including well‐tailored optical permittivity, and tunable hyperbolic dispersion from Type‐II to Type‐I. Ferromagnetic CoFe2 nanosheets introduces novel magnetic responses, such as magnetic anisotropy and enhanced coercivity. Furthermore, in situ heating X‐ray diffraction (XRD) suggests good thermal stability of the 3D nanocomposite films up to the measured temperature of 600 °C. This three‐phase 3D nanocomposite design offers more flexibility in HM designs, multifunctionalities, and phase stability, compared with the typical two‐phase HMs toward future metamaterials by design. [ABSTRACT FROM AUTHOR]

We report on the use of 2D Ruddlesden–Popper (RP) perovskites as optoelectronic materials in building-integrated applications, addressing the challenge of balancing transparency, photoluminescence, and stability. With the addition of polyvinylpyrrolidone (PVP), the 2D RP films exhibit superior transparency compared to their 3D counterparts with an average visible transmittance (AVT) greater than 50% and photoluminescence stability under continuous illumination and 85 °C heat for up to 100 h as bare, unencapsulated films. Structural investigations show a stress relaxation in the 3D perovskite films after degradation from thermal aging that is not observed in the 2D RP films, which retain their phase after thermal and light aging. We also demonstrate ultrasmooth, wide-bandgap 2D Dion–Jacobson (DJ) films with PVP incorporation up to 2.95 eV, an AVT above 70%, and roughnesses of ~2 nm. These findings contribute to the development of next-generation solar materials, paving the way for their integration into built structures. [ABSTRACT FROM AUTHOR]

Quasi‐(2D) formamidinium lead‐iodide (FAPbI3) perovskites are winsome materials for high‐performance photodetectors (PDs). Between Ruddlesden‐Popper (RP) and Dion‐Jacobson (DJ) phases, the latter exhibits lower non‐radiative recombination and higher mobility compared to the relatively easily synthesized former. For efficient charge separation and transport, graphene‐assisted two‐terminal coplanar PD leveraging the DJ phase perovskite is proposed. Diamino octane (DAO), incorporated into 3D FAPbI3 perovskite, resulted in DJ phase [DAO(FA)n‐1PbnI3n+1], n being predefined integers 1≤ n ≤ ∞, demonstrating a vertical gradient heterostructure of n phases. Superior crystallinity and thermal stability of the quasi‐2D films are confirmed via synchrotron‐based studies. Band‐edge of the 3D film blue‐shifted consistently from 810 nm, while passing through the quasi‐2D phases, to ≈500 nm for the 2D phase. The dynamic range of photoresponsivity (R) of PDs reflected the absorption trend, with the 2D perovskite being infrared blind. Graphene's high carrier mobility coupled with the perovskite's high absorbance resulted in an unprecedented high R of ≈107 A W−1 and specific detectivity of 9.77 × 1016 Jones under 42.25 nW cm−2 of 405 nm illumination for the predefined n = 2 film. This underscores the potential of the DJ phase quasi‐2D perovskite@graphene in realizing stable, sensitive, and spectrally tunable PDs. [ABSTRACT FROM AUTHOR]

As one of the most promising photovoltaic technologies, perovskite solar cells (PSCs) exhibit high absorption coefficients, tunable bandgaps, large carrier mobilities, and versatile fabrication techniques. Nevertheless, the commercialization of the technology is hindered by poor material stability, short device lifetimes and the scalability of fabrication techniques. To address these technological drawbacks, various strategies have been explored, with one particularly promising approach involving the formation of a low-dimensional layer on the surface of the three-dimensional perovskite film. In this work, we demonstrate the use of guanidinium tetrafluoroborate, CH6BF4N3, (GATFB) as a post-treatment step to enhance the performance of PSCs. Compared with the control sample, the application of GATFB improves the film surface topology, reduces surface defects, suppresses non-radiative recombination, and optimizes band alignment within the device. These positive effects reduce recombination losses and enhance charge transport in the device, resulting in PSCs with an open-circuit voltage (VOC) of 1.18 V and a power conversion efficiency (PCE) of 19.7%. The results obtained in this work exhibit the potential of integrating low-dimensional structures in PSCs as an effective approach to enhance the overall device performance, providing useful information for further advancement in this rapidly evolving field of photovoltaic technology. [ABSTRACT FROM AUTHOR]

Particle systems can achieve many scenarios that are difficult to achieve in the field or expensive in reality. In this paper, the requirements of 3D film special effects and the design process of particle systems are studied. Unity3D engine was used to simulate 3D movie special effects. Then, the motion trajectory planning of 3D video group animation characters based on particle swarm optimization is proposed. Then, the system models the animated characters' moving track to achieve the realism's dynamic effect. This project intends to use the gravity optimization method for particle swarm optimization. The aim is to overcome the optimization difficulty caused by particle swarm optimization, which is easy to fall into local extreme values. Finally, the generated trajectory information is input into the 3D simulation system for conflict detection and clustering tests. Experiments show that the proposed algorithm can effectively render memorable scenes such as movies and TV. The picture has a high real-time frame rate and is realistic. [ABSTRACT FROM AUTHOR]

The simultaneous oblique impact of multiple droplets on a liquid film is an intricate phenomenon prevalent in diverse natural and industrial processes. However, previous studies have primarily focused on single droplet impact, while an in-depth understanding of the more complex multi-droplet scenario remains lacking. The current study aims to numerically investigate the simultaneous oblique impact of two droplets on a water film using a three-dimensional Volume of Fluid (VOF) model. The effects of the Weber number and the impact angle on the crown behavior are carefully analyzed. The results demonstrate that increasing the Weber number enhances the central uprising sheet height but has minor influences on the upstream crown radius and central sheet radius. In contrast, the increase in the impact angle leads to a decreased upstream crown radius and an increased central sheet radius, while the central sheet height remains relatively unaffected. In addition, the splashing threshold for the dual droplet impact cases is significantly lower than that of the single droplet impact cases due to the interactions between the adjacent crowns. The present results provide novel insights into the underlying physics and useful supports in developing predictive models for the intricate multi-droplet impact phenomenon. [ABSTRACT FROM AUTHOR]

Copyright of Gumushane Universty Electronic Journal of the Faculty of Communication / Gümüshane Üniversitesi Iletisim Fakültesi Elektronik Dergisi is the property of Gumushane Universitesi Iletisim Fakultesi Elektronik Dergisi (e-GIFDER) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

By analyzing OLED film layers using the TOF SIMS method with 3D imaging capability, we can effectively improve the detection of OLED defects and understand the constitutive relationship. This inspection method can be integrated into the production line to realize process improvement and defect interception during mass production. [ABSTRACT FROM AUTHOR]

In order to expand the application of 3D printing technology to the thick-film hybrid integrated circuits and to improve sintering efficiency of the thick films, four kinds of thick films including three conductor films and a dielectric film were prepared via 3D direct printing followed by laser sintering. Subsequently, microstructures and properties of the obtained films were compared with those of the thick films fabricated by commonly-used screen printing & high-temperature furnace sintering. The results show that the thick conductor and dielectric films produced by using the common method exhibit fine microstructures and good properties. In contrast, the thick conductor films prepared by the 3D direct printing & laser sintering are flat and continuous with a uniform thickness and good welding performance, but the density of the films is not large enough to ensure acceptable adhesion and square resistance. The relative density of the thick dielectric film is much lower than those of the thick conductor films. As a result, the insulation performance of the thick dielectric film does not meet the standard requirements. Overall, it is feasible to prepare the thick conductor/dielectric films via 3D direct writing, but the laser sintering parameters should be optimized to fulfill sintering densification of the thick films, and further to improve their bonding strengths with the ceramic substrates. [ABSTRACT FROM AUTHOR]

Advanced manufacturing techniques offer tremendous potential in electronics, photonics, and biomedicine. Self‐assembly is a powerful strategy for creating three‐dimensional (3D) artificial structures, but existing thin film release techniques have limitations in the relatively complex processes. Herein, a localized laser scribing strategy is proposed to guide the self‐assembly of two‐dimensional thin films into 3D microstructures. It is revealed that laser‐induced heating and momentum can release thin films and roll them into various microstructures. Uniquely, this method allows accurate control of shapes, curvatures, orientations, and sizes for the fabricated rolls. This is a one‐step strategy with no pre‐patterning or post‐drying required. The proposed method represents a significant improvement over existing self‐assembly techniques and may enrich the thin film self‐assembly materials and applications. As proof of concept, the prepared gold micro‐rolls are demonstrated as implanted stents in porcine arteries with impressive flexibility. This study provides a new approach to creating 3D microstructures with simplicity and high repeatability and has significant implications for the future of advanced manufacturing, especially in emerging miniaturized applications, such as invasive robotics, minimized drug delivery, implanted batteries, and nanophotonics. [ABSTRACT FROM AUTHOR]

High-quality conjugated microporous polymer (CMP) films with orientation and controlled structure are extremely desired for applications. Here, we report the effective construction of CMP 3D composite films (pZn/PTPCz) with a controlled porosity structure and preferred orientation using the template-assisted electropolymerization (EP) approach for the first time. The structure of pZn/PTPCz composite thin films and nitrophenol sensing performance were thoroughly studied. When compared to the control CMP film made on flat indium tin oxide (ITO) substrates, the as-prepared pZn/PTPCz composite films showed significantly enhanced fluorescent intensity and much better sensing performance for the model explosive. This was attributed to the metal-enhanced fluorescence (MEF) of porous nanostructured zinc (pZn) and the additional macroporosity of the pZn/PTPCz composite films. This work provides a feasible approach for creating oriented 3D CMP-based thin films for advanced applications. [ABSTRACT FROM AUTHOR]

Imparting high thermal conductivity to electrocaloric refrigeration polymers is a promising solution for efficiently synergizing and accurately managing the vast heat generated by high-power density electronics. We employed a sacrificial template method to construct a three-dimensional thermally conductive SiOC ceramic network and embedded it in the electrocaloric polymer. The electrocaloric composite film with a 1 wt. % SiOC achieved a synergistic improvement in heat transfer and electrocaloric cooling, while the thermal diffusivity of the 10 wt. % composites increased sixfold. The three-dimensional ceramic network not only acted as a heat transfer pathway but also induced the transition of the electrocaloric polymer chain to a high-entropy state, increasing the number of dipole entities that could be driven by the electric field. The system reached a refrigeration temperature change of 2 K at a field strength of as low as 30 MV m−1. The high-entropy and high-crystallized electrocaloric composite film induced by the SiOC thermal conductive interface provides a tool for synergistic thermal management. [ABSTRACT FROM AUTHOR]

The construction of lithium–sulfur battery cathode materials while simultaneously achieving high areal sulfur‐loading, adequate sulfur utilization, efficient polysulfides inhibition, rapid ion diffusion, etc. remains a major challenge. Herein, an internal regulatory strategy to fabricate the unique walnut‐like yolk–shell carbon flower@carbon nanospheres is presented (WSYCS) as sulfur hosts. The internal carbon flower, suitable cavity, and external carbon layer effectively disperse the insulate sulfur, accommodate volumetric expansion, and confine polysulfides, thus improving the performance of lithium–sulfur batteries. The finite element simulation method also deduces the enhanced Li+ diffusion and lithium–sulfur reaction kinetics. More importantly, WSYCS2 is grafted onto carbon fiber (CF) by electro‐spinning method to form a tandem WSYCS2@CF 3D film as a sulfur host for the free‐standing electrode. The corresponding battery exhibits an extremely high areal capacity of 15.5 mAh cm−2 with a sulfur loading of 13.4 mg cm−2. Particularly, the flexible lithium–sulfur pouch cell delivers a high capacity of 8.1 mAh cm−2 and excellent capacity retention of 65% over 800 cycles at a relatively high rate of 1C, corresponding to a calculated energy density of 539 Wh kg−1 and 591 Wh L−1. This work not only provides guidance for tailoring thick carbon/sulfur electrodes but also boosts the development of practical lithium–sulfur batteries. [ABSTRACT FROM AUTHOR]

2D/3D interfaces provide long‐term stability for the operation of metal halide perovskite solar cells. However, the cation migration under heat and light can disturb the interface and create a graded cation interface. This study has now probed the cation migration by physically pairing X2PbI4 (X = butylammonium BA, oleylammonium OA, or phenethylammonium PEA) 2D film and (CH3NH3, MA)PbI3 3D film at different temperatures and recording changes in the absorption and emission spectra. The migration of the methyl ammonium cation toward the 2D film slowly transforms the n = 1 layered phase into n = 2 and 3 layered phases. The 3D film, on the other hand, exhibits relatively small changes, as the inclusion of spacer cation has little effect on its phase. The apparent activation energy determined from the temperature‐dependent cation migration kinetics (Ea = 29– 50 kJ mol−1) indicates alkyl ammonium cations such as butyl ammonium migrate more readily into the 3D layer than aromatic cations such as PEA. The ease of migration of spacer cations between physically paired films suggests that the varied composition at the interface should be considered while evaluating the effectiveness of the 2D/3D design strategy for improving the performance of perovskite solar cells. [ABSTRACT FROM AUTHOR]

3D pattern film is a film that makes a 2D pattern appear 3D depending on the amount and angle of light. However, since the 3D pattern film image was developed recently, there is no established method for classifying and verifying defective products, and there is little research in this area, making it a necessary field of study. Additionally, 3D pattern film has blurred contours, making it difficult to detect the outlines and challenging to classify. Recently, many machine learning methods have been published for analyzing product quality. However, when there is a small amount of data and most images are similar, using deep learning can easily lead to overfitting. To overcome these limitations, this study proposes a method that uses an MLP (Multilayer Perceptron) model to classify 3D pattern films into genuine and defective products. This approach entails inputting the widths derived from specific points' heights in the image histogram of the 3D pattern film into the MLP, and then classifying the product as 'good' or 'bad' using optimal hyper-parameters found through the random search method. Although the contours of the 3D pattern film are blurred, this study can detect the characteristics of 'good' and 'bad' by using the image histogram. Moreover, the proposed method has the advantage of reducing the likelihood of overfitting and achieving high accuracy, as it reflects the characteristics of a limited number of similar images and builds a simple model. In the experiment, the accuracy of the proposed method was 98.809%, demonstrating superior performance compared to other models. [ABSTRACT FROM AUTHOR]

Transversal media move. They move with ease across a variety of interfaces, formats, materials, software, hardware, uses, and communities of practice.1 In this article, transversal media is an umbrella term used to classify media objects with the same underlying form that takes shape across a variety of materialities through freeze and flow states. Specific to 3D data, 3D transversal media are a distinct media type that have emerged from the development and proliferation of 3D media technologies, specifically the 3D printer, 3D scanner, and extended reality (XR) devices. The central characteristic of 3D transversal media is the ability to move back and forth across digital and atomic forms. Transversality offers an alternative to understanding and speaking of the digital and atomic as opposites, while also acknowledging the differences and similarities across those material transmutations. For instance, the same 3D transversal media object can be many things simultaneously: an animation on a screen, an object inside a virtual reality experience, a 3D-printed plastic figurine, a projected hologram, and more. This article tracks the complexities of 3D transversal media when they move across their individual and networked states, and moreover, the linked cultural and technological significance of that movement. This approach reveals how technology and media can inherit and reproduce hegemonic cultural ideologies and practices—whether intentional or not. To concretize this, the article concludes with a case study on Thutmose's well-known bust of Nefertiti, now a 3D transversal object, and how its transversal affordances converge and interact with global cultural politics—specifically in this case, those related to colonialism and imperialism. [ABSTRACT FROM AUTHOR]

Molecular beam epitaxy (MBE) is demonstrated as an excellent growth technique for growing a low-defect GaN channel layer, which is crucial for controlling vertical leakage current and improving breakdown voltage (BV) in GaN-based high-electron mobility transistors (HEMTs). The 3D islands to 2D growth mode transition approach was induced by modulating substrate growth temperature (Tsub), displaying an overall improvement in film quality. A comprehensive investigation was conducted into the effects of Tsub on surface morphologies, crystal quality, and the optical and electrical properties of GaN films. Optimal results were achieved with a strain-relaxed GaN film grown at 690 °C, exhibiting significantly improved surface characteristics (root-mean-square roughness, Rq = 0.3 nm) and impressively reduced edge dislocations. However, the film with the smoothest surface roughness, attributed to the effect of the Ga-rich condition, possessed a high surface pit density, negatively affecting optical and electrical properties. A reduction in defect-related yellow emission further confirmed the enhanced crystalline quality of MBE GaN films. The optimized GaN film demonstrated outstanding electrical properties with a BV of ~1450 V, surpassing that of MOCVD GaN (~1180 V). This research significantly contributes to the advancement of MBE GaN-based high electron mobility transistor (HEMT) applications by ensuring outstanding reliability. [ABSTRACT FROM AUTHOR]

Converting PbI2 residues into low‐dimensional perovskites through post‐treatment with ammonium‐based large cations can passivate 3D perovskites, thus has emerged as an effective strategy to improve the performance of perovskite solar cells (PSCs). Herein, a dramatically improved efficiency is demonstrated for PSCs based on a two‐step‐processed FAPbI3 perovskite via post‐treatment with formamidinium (FA)‐based benzamidine hydrochloride (PFACl), outperforming the commonly used methylamine (MA)‐based benzylamine hydrochloride (PMACl). With an in‐depth exploration of the crystal structures and morphology changes of the FAPbI3 perovskite upon the PFACl post‐treatment, the preferential formation of 1D rather than 2D structures on the 3D perovskite film is identified. In contrast to the 2D counterpart, the more energetically favorable 1D structure enables a more effective elimination of PbI2 residues. As a consequence, the PFACl‐induced 1D/3D perovskite film is endowed with smoother morphology, more uniform surface potential distribution, lower trap density, faster charge transfer, and better film stability than the PMACl‐induced 2D/3D perovskite and control films, demonstrating champion efficiencies of 24.9% for a small‐size PSC, 23.6% for a 1 cm2 large‐size PSC, and 21.2% for a 5 × 5 cm2 mini‐module, which is the highest among the perovskite solar mini‐modules using the two‐step deposition method. [ABSTRACT FROM AUTHOR]

Here, the facile strategy of preparing filamentous copper phthalocyanine (CuPc) based gas sensors using a solution method was studied. Electrical and gas sensitive properties of filamentous CuPc films transistors were studied in detail. The filamentous CuPc films had a three-dimensional and porous structure, the gas analytes could interact more effectively with the gas sensitive layers, and the efficiency of charge carrier conversion into conductive channel increased, thus improving the sensing performance of the sensors. The relative responsivities of 75 mg mL−1 filamentous CuPc films sensors to 20 ppm NO2 gas were 32797%. The response rate was 80%. The sensitivity was 1492%/ppm. The LOD was 0.3 ppm. The successful preparation of filamentous CuPc films and their application in sensors lay a foundation for the future application of phthalocyanine materials in the field of flexible sensing. [ABSTRACT FROM AUTHOR]

In recent years, the remarkable optoelectronic characteristics exhibited by perovskite quantum dots (PQDs) have captured significant attention, which has spurred numerous investigations and novel applications. Nonetheless, the development of solution‐processed upconversion devices (UCDs) has predominantly centered around the utilization of organic materials, 3D perovskite films, and II‐VI quantum dots. In this work, PQDs are utilized for the first time as emission materials to enhance UCD performance. The stability of PQDs, synergistic coverage effect between PQDs and hole‐transporting layers (HTLs), and the interfaces of CGL/HTL are investigated in an attempt to identify the primary factor affecting UCD performance. The optimized UCD incorporating with effective TAPC HTLs demonstrate a maximum luminance of 463.9 cd m−2 at 520 nm (biased at 12 V and irradiated under 785 nm NIR light) accompanied by significant current gains of 167 times (at 3.4 V) and a noteworthy photon‐to‐photon conversion efficiency of 5.68% (at 12 V). The impressive performance is accompanied by a remarkably low turn‐on voltage of 1.4 V and a high leakage voltage of up to 12 V, making the highest record reported for solution‐processed UCDs. [ABSTRACT FROM AUTHOR]

The noteworthy stability of Dion–Jacobson (DJ) phase two-dimensional perovskites marks them as potential contenders for use in optoelectronic applications. Nonetheless, their proliferation is considerably stymied by the constrained charge transport properties inherent to them. This bottleneck is adeptly navigated by deploying 2D-DJ perovskite top layers, seamlessly integrated on 3D perovskite films. We unveil a novel organic cation salt, 4-(Aminomethyl)piperidine (4AMP), as a potent facilitator for treating perovskite photovoltaic films. By employing the annealing technique, we facilitated the in situ creation of a hybrid 2D/3D architecture. Contrasted with conventional 3D architectures, the delineated perovskite heterojunctions with a 2D/3D structure exhibit superior enhanced charge separation, and mitigate photovoltaic losses by proficiently passivating intrinsic defects. The size-graded perovskite 2D/3D structure engineered herein significantly elevates the charge transfer performance, concurrently attenuating the excess lead iodide induced by bulk defects. This precise method resulted in a significant increase in Power Conversion Efficiency, reaching 23.08%, along with an open-circuit voltage (Voc) of 1.17 V. Remarkably, the unpackaged modified device robustly retains 92% of its initial PCE post a 3000 h sojourn under ambient conditions. This discourse propounds a novel paradigm for constructing stable planar PSC 2D/3D heterojunctions, thereby enriching the blueprint for advanced perovskite-based photovoltaic systems. [ABSTRACT FROM AUTHOR]

Animation technologies are extensively utilized within the realm of Bronze Drum Culture (BDC), yet there exists a dearth of empirical evidence concerning the efficacy of various animation technologies in shaping children's affective dispositions toward BDC. This study endeavours to scrutinize the comparative impacts of different animation technologies on children's affective attitudes toward BDC, discern children's technological preferences as perceived by parents, primary educators, and children themselves, and ascertain the determinants influencing children's affective attitudes. The research employed 2D and 3D animation technology, 2D interactive technology, and VR panoramic technology, all centred around the BDC theme, as research stimuli. Semi-structured interviews were conducted with 24 children aged 7-10 from Guangxi, along with 11 parents and two primary school teachers. Grounded theory analysis and Nvivo 12 software were employed for data analysis. The findings underscored the significant impact of animation technology on children's affective attitudes toward BDC, particularly in kindling their interest. Consensus emerged among stakeholders that 2D interactive games and 3D animation constituted the preferred technological types among children. Attributes such as interactivity, immersion, stereoscopy, content quality, engagement, and knowledge dissemination were identified as pivotal requisites for eliciting children's affective attitudes toward BDC, while perceived knowledge value and personal interest were recognized as internal catalysts for fostering positive affective attitudes. This study advocates for the utilization of "3D animation combined with interactive technology" to cultivate children's positive affective attitudes toward BDC, while cautioning against an excessive emphasis on knowledge content or complexity that may impede engagement. [ABSTRACT FROM AUTHOR]

2D/3D‐structured perovskites are promising for high‐performance and stable solar cells due to the passivation ability and hydrophobic character of the large organic cations. However, most of the 2D/3D‐structured perovskites prepared by adding ammonium halides into the precursors or depositing ammonium halides on top of a 3D perovskite film ignore the buried interface which is crucial for the device efficiency and stability. Here, 2D/3D/2D‐structured perovskite films with optimized buried interface are constructed by depositing phenethylammonium bromide (PEABr) on top and 2D perovskite PEA2FA2Pb3Br10 at the bottom of 3D Cs0.07FA0.85MA0.08Pb(I0.95Br0.05)3 perovskite. Thus, a power conversion efficiency (PCE) of 24.2% is achieved due to the minimal nonradiative recombination. The encapsulated device also shows an improved stability, maintaining 93.5% of the initial value after 1000 h under 1 sun equivalent illumination at the maximum power point. This strategy may provide important insights into designing perovskite film structures to achieve high‐performance solar cells with high stability. [ABSTRACT FROM AUTHOR]

The present study aimed to explore the effectiveness of 3D-guided imagery films on teaching the "Water" Unit for developing the visual thinking skills among kindergarten children. This study adopted the quasi-experimental approach and the tools included a test of the visual thinking of kindergarten children prepared by the researchers and the teacher's manual of school activities via the 3D films based on imagination-oriented strategies. The study sample consisted of 30 kindergarten children in Sakaka town, Al Jouf. The children were distributed randomly into an experimental group and a controlled group. The experimental group consisted of 15 children (10 males and 5 females), and the controlled group included 15 children (10 males and 5 females). The results indicated a statistically significant difference of (0.05) between the mean scores of the experimental group and the controlled group in the visual thinking in favor of the experimental group. There was also a statistically significant difference of (0.05) between the mean scores of the experimental group in the pre-test and the post-test of the visual thinking in favor of the post-test. [ABSTRACT FROM AUTHOR]

MXene is a competitive and attractive 2D material used in wearable electromagnetic devices due to its laminated nanostructure, abundant surface terminations and high conductivity. Assembling MXene nanosheets into multi-dimensional microstructures is considered to be an effective method for improving the overall performance of MXene-based composites, especially their electromagnetic attenuation and wearability performance. This article focuses on the strategies for assembling multi-dimensional MXene microstructures, from 0D spheres and 1D fibers to 2D films and 3D architectures. The origin of the electromagnetic response of MXene microstructures is revealed, and the corresponding electromagnetic absorption and interference shielding performance are shown. Furthermore, additional extended functions that serve wearable electromagnetic attenuation devices are highlighted. Finally, the application prospects and challenges of wearable electromagnetic devices, as well as the function integration of multi-dimensional MXene composites, are summarized. [ABSTRACT FROM AUTHOR]

The remotely controlled shape memory behaviors of a two‐dimensional (2D) sheet to controlled helix structure upon external stimuli is of great significance in the field of smart materials. Herein, we devise a strategy to fabricate a series of shape memory polycaprolactone/W18O49 nanowire film via highly efficient UV‐triggered thiol‐acrylate click chemistry. The resultant polymer composites exhibited desirable photothermal transfer efficiency and can enable rapid temperature increase over the melting temperature of polymeric matrix, thus remotely actuating shape transformation within 8 s. Owing to the well‐defined architecture of the polymer network, the fabricated elastic composite film exhibited a high degree of crystallinity and showed excellent shape memory properties with Rf of 93.12% and Rr of 95.32%. Remarkably, under a 160 mW/cm2 simulated sunlight illumination, the transformation of flat 2D film into 3D chiral actuators is driven by designing anisotropic bilayer thin sheet, and it yields right‐ and left‐handed helix. This work will pave the way for designing biomimetic flexible actuators toward multifunctional shape‐shifting devices. Highlights: Shape memory polycaprolactone/W18O49 nanowires composite film is fabricated via UV‐triggered thiol‐ene click chemistry.Polymer composites exhibit light‐activated shape memory behaviors.The composite films show excellent shape fixity and shape recovery ratio based on the well‐defined network.The shape morphing behaviors of a flexible 2D bilayer strip into 3D chiral actuators are achieved. [ABSTRACT FROM AUTHOR]

Purpose: To present the commissioning process of a low‐cost solution for directly 3D printed flexible patient specific bolus. Methods: The 3D printing solution used in this study consisted of a resin stereolithography 3D printer and a flexible curing resin. To test the dimensional accuracy of the 3D printer, rectangular cuboids with varying dimensions were 3D printed and their measured dimensions were compared to the designed dimensions. Percent Depth Dose (PDD) profiles were measured by irradiating film embedded in a 3D printed phantom made of the flexible material. A CT of the phantom was acquired and used to replicate the irradiation setup in the treatment planning system. PDDs were calculated for both the native HU of the phantom, and with the phantom HU overridden to 300 HU to match its physical density. Dosimetric agreement was characterized by comparing calculated to measured depths of R90, R80, and R50. Upon completion of the commissioning process, a bolus was 3D printed for a clinical case study for treatment of the nose. Results: Dimensional accuracy of the printer and material combination was found to be good, with all measured dimensions of test cuboids within 0.5 mm of designed. PDD measurements demonstrated the best dosimetric agreement when the material was overridden to 300 HU, corresponding to the measured physical density of the material of 1.18 g/cc. Calculated and measured depths of R90, R80, and R50 all agreed within 1 mm. The bolus printed for the clinical case was free from defects, highly conformal, and led to a clinically acceptable plan. Conclusion: The results of the commissioning measurements performed indicate that the 3D printer and material solution are suitable for clinical use. The 3D printer and material combination can provide a low‐cost solution a clinic can implement in‐house to directly 3D print flexible bolus. [ABSTRACT FROM AUTHOR]

The piezoelectric coupling principle is widely used (along with capacitive coupling and piezoresistive coupling) for MEMS accelerometers. Piezoelectric MEMS accelerometers are used primarily for vibration monitoring. Polymer piezoelectric MEMS accelerometers offer the merits of heavy-metal-free structure material and simple microfabrication flow. More importantly, polymeric piezoelectric MEMS accelerometers may be the basis of novel applications, such as fully organic inertial sensing microsystems using polymer sensors and organic integrated circuits. This paper presents a novel polymer piezoelectric MEMS accelerometer design using PVDF films. A simple and rapid microfabrication flow based on laser micromachining of thin films and 3D stereolithography was developed to fabricate three samples of this design. During proof-of-concept experiments, the design achieved a sensitivity of 21.82 pC/g (equivalent open-circuit voltage sensitivity: 126.32 mV/g), a 5% flat band of 58.5 Hz, and a noise density of 6.02 µg/√Hz. Thus, this design rivals state-of-the-art PZT-based counterparts in charge sensitivity and noise density, and it surpasses the performance capabilities of several commercial MEMS accelerometers. Moreover, this design has a 10-times smaller device area and a 4-times larger flat band than previous state-of-the-art organic piezoelectric MEMS accelerometers. These experimentally validated performance metrics demonstrate the promising application potential of the polymeric piezoelectric MEMS accelerometer design presented in this article. [ABSTRACT FROM AUTHOR]

The article focuses on the transformative role of three dimension (3D) technology in bringing the initially deemed "unfilmable" Yan Martel's novel, "Life of Pi," to the screen. Topics include the acceptance of 3D as a legitimate cinematic form, its use in creating immersive ocean scenes, and its contribution to conveying the traumatic undertones of the story; and the allegorical use of 3D in reconciling illusionism and realism, emphasizing its role in storytelling and bearing witness.

Flexible electronic films need to be applied in different ambient temperatures. The porous substrate of the composite film enhances air permeability. The lifespan of these composite films is significantly affected by variations in temperature and substrate porosity. To explore the impact of temperature and porosity on the performance of composite films, we developed a 3D deformation detection system utilizing the advanced three-dimensional digital image correlation (3D-DIC) method. This system enabled us to observe and analyze the 3D deformation behaviors of porous polydimethylsiloxane (PDMS) flexible composite films when they are subjected to uniaxial stretching at different temperatures. We proposed employing two parameters, namely the strain fluctuation coefficient (M) and off-plane displacement (w), to characterize the 3D deformation of the films. This holistic characterization of deformation through the combined utilization of parameters M and w held greater significance for composite films compared to the conventional practice of solely measuring mechanical properties like the elastic modulus. Through experimental analysis, we discovered that as the temperature increased, the M value of the film decreased while the w value increased for the same stretching distance. Furthermore, the porosity of the composite film depended on the doping mass ratio of PDMS to deionized water during the fabrication process. Specifically, when the ratio was set at 6:1, the composite film exhibited the smallest M value and w value, and the highest air permeability. Additionally, the 3D deformation behavior remained stable across different temperatures for this specific ratio. Moreover, our findings unveiled a remarkable association between the parameter w and the resistance value of the device. These findings provide valuable insights for optimizing the fabrication process of porous PDMS flexible electronic composite films. [ABSTRACT FROM AUTHOR]

A recent development in marketing tools aimed at boosting sales involves the use of three-dimensional pattern films. These films are designed to captivate customers' interest by applying 3D patterns to the surface of products. However, ensuring the quality of these produced 3D films can be quite challenging due to factors such as low contrast and unclear layout. Furthermore, there has been a shortage of research on methods for evaluating the quality of 3D pattern films, and existing approaches have often failed to yield satisfactory results. To address this pressing issue, we propose an algorithm for classifying 3D pattern films into either 'good' or 'bad' categories. Unlike conventional segmentation algorithm or edge detection methods, our proposed algorithm leverages the width information at specific heights of the image histograms. The experimental results demonstrate a significant disparity in histogram shapes between good and bad patterns. Specifically, by comparing the widths of all images at the quintile of the histogram height, we show that it is possible to achieve a 100% accuracy in classifying patterns as either 'good' or 'bad'. In comparative experiments, our proposed algorithm consistently outperformed other methods, achieving the highest classification accuracy. [ABSTRACT FROM AUTHOR]