Search

Molecular imprinting has advanced towards synthesizing whole-cell imprints of microorganisms such as bacteria on various sensor surfaces including wire electrodes, quartz crystal microbalances, and microparticles (MPs). We recently introduced cell-imprinted polymers (CIPs) coated on MPs, called CIP-MPs, for bacteria recovery from water. In this paper, we have advanced towards rapid fluorometric Escherichia coli (E. coli) detection by applying fluorescent magnetic CIP-MPs, which were captured by soft ferromagnetic microstructures integrated into a microfluidic channel. The shape of ferromagnetic microstructures was optimized numerically to enhance the magnetophoretic accumulation of CIP-MPs in the microchannel. The device was then fabricated and the flow rate required to enhance bacteria capturing efficiency by CIP-MPs was determined. Decreasing the flow rate reduced the flow-induced drag and increased the interactions between the bacteria and imprinted CIP cavities. Fluorescent imaging of the accumulated CIP-MPs was done before and after bacteria capturing to quantify the changes in the fluorescence intensity as E. coli cells were captured by CIP-MPs in the microchannel. The dose-response curve of the sensor at 0-10 9  CFU/mL bacterial counts was obtained. Using the 3- and 10-sigma methods on the dose-response curve, the limits of detection (LOD) and quantification (LOQ) of the sensor were determined to be 4 × 10 2 and 3 × 10 3  CFU/mL, respectively, within a dynamic range of 10 2 -10 7  CFU/mL. Lastly, the specificity of the CIP-MPbased sensor towards E. coli was tested and confirmed using Sarcina as a non-specific target bacterium. In summary, our developed sensor offers a promising approach for rapid and low-cost detection of bacteria in water and is suitable for development of portable and durable all-polymeric sensors for point-of-need detection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Chronic wounds are among the major healthcare issues affecting millions of people worldwide with high rates of morbidity, losses of limbs and mortality. Microbial infection in wounds is a severe problem that can impede healing of chronic wounds. Accurate, timely and early detection of infections, and real time monitoring of various wound healing biomarkers related to infection can be significantly helpful in the treatment and care of chronic wounds. However, clinical methodologies of periodic assessment and care of wounds require physical visit to wound care clinics or hospitals and time-consuming frequent replacement of wound dressing patches, which also often adversely affect the healing process. Besides, frequent replacements of wound dressings are highly expensive, causing a huge amount of burden on the national health care systems. Smart bandages have emerged to provide in situ physiochemical surveillance in real time at the wound site. These bandages integrate smart sensors to detect the condition of wound infection based on various parameters, such as pH, temperature and oxygen level in the wound which reduces the frequency of changing the wound dressings and its associated complications. These devices can continually monitor the healing process, paving the way for tailored therapy and improved quality of patient's life. In this review, we present an overview of recent advances in biosensors for real time monitoring of pH, temperature, and oxygen in chronic wounds in order to assess infection status. We have elaborated the recent progress in quantitative monitoring of several biomarkers important for assessing wounds infection status and its detection using smart biosensors. The review shows that real-time monitoring of wound status by quantifying specific biomarkers, such as pH, temperature and tissue oxygenation to significantly aid the treatment and care of chronic infected wounds., Competing Interests: As the lead author of this article, I can confirm that neither I nor any of my co-authors have any financial or personal relationships that could be perceived as a potential conflict of interest. We have no affiliations or financial involvement with any organization or entity that has a direct or indirect interest in the subject matter of this article. We believe that it is important to disclose any potential conflicts of interest in scientific publications to maintain the integrity and transparency of the research process. As such, we confirm that we have no conflicts of interest to declare and that the research presented in this article has been conducted in an unbiased and objective manner., (© 2023 The Authors. Published by Elsevier Ltd.)

Currently, permanent vascular stents are fabricated using titanium and stainless steel implants that are nondegradable and offer high stability, but they have certain disadvantages. For example, the prolonged exposition of aggressive ions in the physiological media and the existence of defects in the oxide film create conditions for corrosion to occur, thus triggering unwanted biological events and compromising the mechanical integrity of the implants. Moreover, when the implant does not need to be permanent, there is the need to submit the patient for a second surgery for implant removal. As a solution for nonpermanent implants, biodegradable magnesium alloys have been deemed a promising substitute, for example, for cardiovascular-related applications and the construction of orthopedic devices. A biodegradable magnesium alloy (Mg-2.5Zn) reinforced by zinc and eggshell was employed in this study as an environment-conscious magnesium (eco) composite (Mg-2.5Zn- x ES). Disintegrated melt deposition (DMD) was used to fabricate the composite. Experimental studies were conducted to investigate the biodegradation performance of Mg-Zn alloys containing 3 and 7 wt % eggshell (ES) in simulated body fluid (SBF) at 37 °C. Different corrosion techniques were used to study the corrosion behavior of the Mg-2.5Zn- x ES composites, including weight loss measurements, hydrogen evolution, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and scanning vibrating electrode technique (SVET). Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) were employed to scrutinize the corroded surfaces' morphology and composition. The outcomes indicated that Mg-2.5Zn-3ES possesses the lowest degradation activity.

Most of the freshwaters worldwide are used for agriculture. Freshwater sources are expected to decline and will not suffice to support the food production needed for the growing population. Therefore, growing crops with seawater might constitute a solution. However, very little work has been done on the effect of seawater stress on wheat, an important cereal crop. The present study aimed to determine whether particular wheat genotypes provided better resistance to seawater stress. A set of 80 highly diverse spring wheat genotypes collected from different countries in Europe, Asia, Africa, North and South America was exposed to 50% seawater stress at the early growth stage. Four seeding shoot and root traits were scored for all genotypes. High genetic variations were found among all genotypes for the epicotyl length (EL), hypocotyl length (HL), number of radicles (NOR), and fresh weight (FW). Eight genotypes with high-performance scores of seedling traits were selected. The correlation analyses revealed highly significant correlations among all traits scored in this study. The strongest correlation was found between the NOR and the other seeding traits. Thus, the NOR might be an important adaptive trait for seawater tolerance. The genetic diversity among all genotypes was investigated based on genetic distance. A wide range of genetic distances among all genotypes was found. There was also a great genetic distance among the eight selected genotypes. In particular, the genetic distance between ATRI 5310 (France) and the other seven genotypes was the greatest. Such high genetic diversity might be utilized to select highly divergent genotypes for crossing in a future breeding program. The present study provides very useful information on the presence of different genetic resources in wheat for seawater tolerance., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Amro, Harb, Youssef, Ali, Mohammed, Mourad, Afifi, Börner and Sallam.)

Significance: Selective plane illumination microscopy (SPIM) is an emerging fluorescent imaging technique suitable for noninvasive volumetric imaging of C. elegans. These promising microscopy systems, however, are scarce in academic and research institutions due to their high cost and technical complexities. Simple and low-cost solutions that enable conversion of commonplace wide-field microscopes to rapid SPIM platforms promote widespread adoption of SPIM by biologist for studying neuronal expressions of C. elegans., Aim: We sought to develop a simple and low-cost optofluidic add-on device that enables rapid and immobilization-free volumetric SPIM imaging of C. elegans with conventional fluorescent microscopes., Approach: A polydimethylsiloxane (PDMS)-based device with integrated optical and fluidic elements was developed as a low-cost and miniaturized SPIM add-on for the conventional wide-field microscope. The developed optofluidic chip contained an integrated PDMS cylindrical lens for on-chip generation of the light-sheet across a microchannel. Cross-sectional SPIM images of C. elegans were continuously acquired by the native objective of microscope as worms flowed in an L-shape microchannel and through the light sheet., Results: On-chip SPIM imaging of C. elegans strains demonstrated possibility of visualizing the entire neuronal system in few seconds at single-neuron resolution, with high contrast and without worm immobilization. Volumetric visualization of neuronal system from the acquired cross-sectional two-dimensional images is also demonstrated, enabling the standard microscope to acquire three-dimensional fluorescent images of C. elegans. The full-width at half-maximum width of the point spread function was measured as 1.1 and 2.4  μm in the lateral and axial directions, respectively., Conclusion: The developed low-cost optofluidic device is capable of continuous SPIM imaging of C. elegans model organism with a conventional fluorescent microscope, at high speed, and with single neuron resolution.

Environmental pollutants like microplastics are posing health concerns on aquatic animals and the ecosystem. Microplastic toxicity studies using Caenorhabditis elegans (C. elegans) as a model are evolving but methodologically hindered from obtaining statistically strong data sets, detecting toxicity effects based on microplastics uptake, and correlating physiological and behavioural effects at an individual-worm level. In this paper, we report a novel microfluidic electric egg-laying assay for phenotypical assessment of multiple worms in parallel. The effects of glucose and polystyrene microplastics at two concentrations on the worms' electric egg-laying, length, diameter, and length contraction during exposure to electric signal were studied. The device contained eight parallel worm-dwelling microchannels called electric traps, with equivalent electrical fields, in which the worms were electrically stimulated for egg deposition and fluorescently imaged for assessment of neuronal and microplastic uptake expression. A new bidirectional stimulation technique was developed, and the device design was optimized to achieve a testing efficiency of 91.25%. Exposure of worms to 100 mM glucose resulted in a significant reduction in their egg-laying and size. The effects of 1 μm polystyrene microparticles at concentrations of 100 and 1000 mg/L on the electric egg-laying behaviour, size, and neurodegeneration of N2 and NW1229 (expressing GFP pan-neuronally) worms were also studied. Of the two concentrations, 1000 mg/L caused severe egg-laying deficiency and growth retardation as well as neurodegeneration. Additionally, using single-worm level phenotyping, we noticed intra-population variability in microplastics uptake and correlation with the above physiological and behavioural phenotypes, which was hidden in the population-averaged results. Taken together, these results suggest the appropriateness of our microfluidic assay for toxicological studies and for assessing the phenotypical heterogeneity in response to microplastics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Purpose: To report an original technique for the surgical correction of adolescent idiopathic scoliosis (AIS) based on hybrid construct using polyester bands placed under the thoracic transverse processes., Methods: We reviewed 105 patients operated between 2013 to 2017 for AIS with a minimum of 2 years follow-up. Clinical and radiological data, including 2D measurements of scoliosis parameters preoperatively, and at 3- and 24-months postoperatively were analyzed. Radiological analysis was performed by two independent observers using KEOPS (Smaio, Lyon-France, CE 2014) database., Results: Mean age was 14.6 ± 2 years. Mean follow-up was 23.7 ± 1.2 months. Most curves were classified as Lenke-1 (78%). The average number of vertebra involved in the construct was 10.9 ± 1.3 (range 7-13). A mean of 12.8 implants were used per construct (mean implant density 0.59). The number of subtransverse bands placed averaged 3 (range 1-5 bands). The mean frontal Cobb angle decreased from 57.9 to 21.2 ° (p < 0.05) postoperatively. The average T4-T12 kyphosis increased from 20.2°to 32.4° (p < 0.05) postoperatively and no loss of correction was observed at 2 years follow-up. We encountered one case of transverse process fracture intraoperativley. No neurological complications were observed. In the postoperative period, 4 cases were diagnosed with distal junctional failure, three of which required an extension of the construct, while the fourth case was treated by bracing., Conclusions: The use of subtransverse band is an efficient and safe method for the surgical correction of AIS. This technique incorporates technical ease (minimal risk of neurological injury), provides good frontal correction and restores thoracic kyphosis. Results are maintained over a two-year period., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Caenorhabditis elegans ( C. elegans ) is an optically transparent nematode that shares many gene orthologs and homologs with humans. C. elegans are widely used in large populations for genetic studies relevant to human biology and disease. Success of such studies frequently relies on the ability to image C. elegans structure at high-resolution and high-speed. In this manuscript, we report on the feasibility and suitability of a high-speed variant of reflectance confocal microscopy, known as spectrally encoded confocal microscopy (SECM), for label-free imaging of C. elegans. The developed system utilizes near-infrared illumination in conjunction with refractive and diffractive optics to instantaneously image a confocal image line at a speed of up to 147 kHz with lateral and axial resolutions of 2µm and 10µm, respectively. Our imaging results from wild-type C. elegans and four mutant strains (MT2124, MT1082, CB61, and CB648) demonstrate the ability of SECM in revealing the overall geometry, key internal organs, and mutation-induced structural variations, opening the door for downstream integration of SECM in microfluidic platforms for high throughput structural imaging of C. elegans ., Competing Interests: The authors declare that there are no conflicts of interest related to this article., (© 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.)

In this paper, the novel effect of electric field (EF) on adult C. elegans egg-laying in a microchannel is discovered and correlated with neural and muscular activities. The quantitative effects of worm aging and EF strength, direction, and exposure duration on egg-laying are studied phenotypically using egg-count, body length, head movement, and transient neuronal activity readouts. Electric egg-laying rate increases significantly when worms face the anode and the response is EF-dependent, i.e. stronger (6 V cm-1) and longer EF (40 s) exposure result in a shorter egg laying response duration. Worm aging significantly deteriorates the electric egg-laying behaviour with an 88% decrease in the egg-count from day-1 to day-4 post young-adult stage. Fluorescent imaging of intracellular calcium dynamics in the main parts of the egg-laying neural circuit demonstrates the involvement and sensitivity of the serotonergic hermaphrodite specific neurons (HSNs), vulva muscles, and ventral cord neurons to the EF. HSN mutation also results in a reduced rate of electric egg-laying allowing the use of this technique for cellular screening and mapping of the neural basis of electrosensation in C. elegans. This novel assay can be parallelized and performed in a high-throughput manner for drug and gene screening applications.