Search

• Combined visualization of magnetic domains/walls in high permeability electric steel. • Fringes observed with polarized neutron imaging, correlated to magnetic domains. • Magnetic domains oriented anti-parallel to each other with different magnetic fields. • Dark field imaging contrast helps the visualization of magnetic domain walls. • Also, the magnetic domains appear to be discontinuous at the grain boundaries. In the present work, a combined study with polarized neutron imaging (PNI) and neutron-grating interferometry based dark field imaging (DFI) experiments on grain oriented high permeability steel sample with 3% Si and 0.35 mm thickness is reported. With the combination of these two experimental techniques it was possible to obtain the complex picture of magnetic domain distribution and domain walls in the electric steel samples. With the PNI technique, the observed fringe pattern contrast may be correlated with basic magnetic domains. These magnetic domains are oriented anti-parallel with respect to each other and the different magnetic field in each domain may lead to fringe pattern contrast. The magnetic domains are disrupted at the grain boundaries, observed as discontinuities in the fringe pattern contrast. In comparison, with DFI measurements, we visualized scattering contrast from magnetic domain walls. A clear correlation between basic domains (from PNI) and domain walls (using DFI) is observed. In the current study we also demonstrate the potential of combining two differential experimental techniques to visualize and obtain collective information about magnetic domains and domain walls. [ABSTRACT FROM AUTHOR]

This work describes the implementation of polarized neutron imaging capabilities at the neutron and x-ray tomograph (NeXT) imaging station of the Institut Laue Langevin. This development enhances the capacity of this instrument to study advanced magnetic materials, which are crucial in a variety of engineering applications. Here, the feasibility of polarized neutron imaging at NeXT is demonstrated by visualizing the magnetic field generated by a simple bar magnet. The use of a double-crystal monochromator for wavelength-resolved imaging is also shown to enable both quantitative and qualitative analyses of magnetic materials. This is demonstrated through the determination of magnetization strength in a sample of electric steel (FeSi) in addition to the distribution of its components. Polarimetric imaging is also implemented for the first time to characterize the magnetic field generated by a current-carrying cylindrical wire. These findings collectively underscore the value of incorporating polarized neutron imaging into the already cutting-edge imaging station., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

Increasingly, environmental research efforts seek to understand how the continuous input of microplastics into terrestrial environments alters soil physicochemical properties and affects plants and other soil biota. However, fundamental understanding is hampered by the destructive nature of current analytical techniques, which typically require the disruption of soil samples and often the removal of soil organic matter. This results in the irretrievable loss of essential information about soil microstructure and the spatial distribution of microplastic particles. We showed that the non-invasive approach of dual neutron and X-ray tomography is capable of detecting and localizing microplastics embedded in soil environments with organic components, here tested with peat, charcoal, and bark mulch additions. We explored how the number of microplastic particles can be determined on intact samples, even accompanied by add-on information on the size, shape and distribution of microplastic particles. For some combinations of plastic types and organic material amendments, the basic approach was not successful, but could be enhanced by soaking the sample in hydrogen peroxide solution while largely preserving the integrity of the microstructure, or by including shape parameters into the image analysis. By segmenting images using region growing, we were able to identify all microplastic particles without false positives, even in the presence of organic material. We also succeeded in analyzing small-sized microplastic particles, such as film or fibers, embedded in natural sandy soil. 3D visualization of plastic film fragments together with the soil matrix made it obvious that larger fragments can have a significant impact on soil hydraulic properties. It has also been shown that a group of microplastic fibers can induce a planar crack in the soil matrix. Finally, roots and microplastics could be differentiated and visualized in a soil sample, demonstrating the leeway for the non-invasive study of potential interactions between roots and microplastics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

The Oak Ridge National Laboratory is planning to build the Second Target Station (STS) at the Spallation Neutron Source (SNS). STS will host a suite of novel instruments that complement the First Target Station's beamline capabilities by offering an increased flux for cold neutrons and a broader wavelength bandwidth. A novel neutron imaging beamline, named the Complex, Unique, and Powerful Imaging Instrument for Dynamics (CUPI2D), is among the first eight instruments that will be commissioned at STS as part of the construction project. CUPI2D is designed for a broad range of neutron imaging scientific applications, such as energy storage and conversion (batteries and fuel cells), materials science and engineering (additive manufacturing, superalloys, and archaeometry), nuclear materials (novel cladding materials, nuclear fuel, and moderators), cementitious materials, biology/medical/dental applications (regenerative medicine and cancer), and life sciences (plant-soil interactions and nutrient dynamics). The innovation of this instrument lies in the utilization of a high flux of wavelength-separated cold neutrons to perform real time in situ neutron grating interferometry and Bragg edge imaging-with a wavelength resolution of δλ/λ ≈ 0.3%-simultaneously when required, across a broad range of length and time scales. This manuscript briefly describes the science enabled at CUPI2D based on its unique capabilities. The preliminary beamline performance, a design concept, and future development requirements are also presented., (© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

A systematic study has been carried out to investigate the neutron transmission signal as a function of sample tem-per-ature. In particular, the experimentally de-ter-mined wavelength-dependent neutron attenuation spectra for a martensitic steel at tem-per-atures ranging from 21 to 700°C are com-pared with simulated data. A theoretical description that includes the Debye-Waller factor in order to describe the tem-per-ature influence on the neutron cross sections was im-plemented in the nxsPlotter software and used for the simulations. The analysis of the attenuation coefficients at varying tem-per-atures shows that the missing contributions due to elastic and inelastic scattering can be clearly distinguished: while the elastically scattered intensities decrease with higher tem-per-atures, the inelastically scattered intensities increase, and the two can be separated from each other by analysing unique sharp features in the form of Bragg edges. This study presents the first systematic approach to qu-antify this effect and can serve as a basis , for example, to correct measurements taken during in situ heat treatments, in many cases being a prerequisite for obtaining qu-anti-fiable results., (© Al-Falahat et al. 2022.)

Herein, the concept of constructing binder- and carbon additive-free organosulfur cathode was proved based on thiol-containing conducting polymer poly(4-(thiophene-3-yl) benzenethiol) (PTBT). The PTBT featured the polythiophene-structure main chain as a highly conducting framework and the benzenethiol side chain to copolymerize with sulfur and form a crosslinked organosulfur polymer (namely S/PTBT). Meanwhile, it could be in-situ deposited on the current collector by electro-polymerization, making it a binder-free and free-standing cathode for Li-S batteries. The S/PTBT cathode exhibited a reversible capacity of around 870 mAh g -1 at 0.1 C and improved cycling performance compared to the physically mixed cathode (namely S&PTBT). This multifunction cathode eliminated the influence of the additives (carbon/binder), making it suitable to be applied as a model electrode for operando analysis. Operando X-ray imaging revealed the remarkable effect in the suppression of polysulfides shuttle via introducing covalent bonds, paving the way for the study of the intrinsic mechanisms in Li-S batteries., (© 2022 The Authors. ChemSusChem published by Wiley-VCH GmbH.)

A large and increasing number of scientific domains pushes for high neutron imaging resolution achieved in reasonable times. Here we present the principle, design and performance of a detector based on infinity corrected optics combined with a crystalline Gd 3 Ga 5 O 12 : Eu scintillator, which provides an isotropic sub-4 µm true resolution. The exposure times are only of a few minutes per image. This is made possible also by the uniquely intense cold neutron flux available at the imaging beamline NeXT-Grenoble. These comparatively rapid acquisitions are compatible with multiple high quality tomographic acquisitions, opening new venues for in-operando testing, as briefly exemplified here.

In recent years, low-temperature polymer electrolyte fuel cells have become an increasingly important pillar in a zero-carbon strategy for curbing climate change, with their potential to power multiscale stationary and mobile applications. The performance improvement is a particular focus of research and engineering roadmaps, with water management being one of the major areas of interest for development. Appropriate characterisation tools for mapping the evolution, motion and removal of water are of high importance to tackle shortcomings. This article demonstrates the development of a 4D high-speed neutron imaging technique, which enables a quantitative analysis of the local water evolution. 4D visualisation allows the time-resolved studies of droplet formation in the flow fields and water quantification in various cell parts. Performance parameters for water management are identified that offer a method of cell classification, which will, in turn, support computer modelling and the engineering of next-generation flow field designs., (© 2022. The Author(s).)

The behaviour of subsurface-reservoir porous rocks is a central topic in the resource engineering industry and has relevant applications in hydrocarbon, water production, and CO2 sequestration. One of the key open issues is the effect of deformation on the hydraulic properties of the host rock and, specifically, in saturated environments. This paper presents a novel full-field data set describing the hydro-mechanical properties of porous geomaterials through in situ neutron and X-ray tomography. The use of high-performance neutron imaging facilities such as CONRAD-2 (Helmholtz-Zentrum Berlin) allows the tracking of the fluid front in saturated samples, making use of the differential neutron contrast between "normal" water and heavy water. To quantify the local hydro-mechanical coupling, we applied a number of existing image analysis algorithms and developed an array of bespoke methods to track the water front and calculate the 3D speed maps. The experimental campaign performed revealed that the pressure-driven flow speed decreases, in saturated samples, in the presence of pre-existing low porosity heterogeneities and compactant shear-bands. Furthermore, the observed complex mechanical behaviour of the samples and the associated fluid flow highlight the necessity for 3D imaging and analysis.

Extensive research is being conducted on magnesium (Mg) alloys for bone implant manufacturing, due to their biocompatibility, biodegradability and mechanical properties. Gadolinium (Gd) is among the most promising alloying elements for property control in Mg alloy implants; however, its toxicity is controversial. Investigating Gd behavior during implant corrosion is thus of utmost importance. In this study, we analyzed the degradation byproducts at the implant site of biodegradable Mg-5Gd and Mg-10Gd implants after 12 weeks healing time, using a combination of different imaging techniques: histology, energy-dispersive x-ray spectroscopy (EDX), x-ray microcomputed tomography (µCT) and neutron µCT. The main finding has been that, at the healing time in exam, the corrosion appears to have involved only the Mg component, which has been substituted by calcium and phosphorus, while the Gd remains localized at the implant site. This was observed in 2D by means of EDX maps and extended to 3D with a novel application of neutron tomography. X-ray fluorescence analysis of the main excretory organs also did not reveal any measurable accumulation of Gd, further reinforcing the conclusion that very limited or no removal at all of Gd-alloy happened during degradation. STATEMENT OF SIGNIFICANCE: Gadolinium is among the most promising alloying elements for property control in biodegradable magnesium alloy implants, but its toxicity is controversial and its behavior during corrosion needs to be investigated. We combine 2D energy dispersive x-ray spectroscopy and 3D neutron and x-ray tomography to image the degradation of magnesium-gadolinium implants after 12 weeks of healing time. We find that, at the time in exam, the corrosion has involved only the magnesium component, while the gadolinium remains localized at the implant site. X-ray fluorescence analysis of the main excretory organs also does not reveal any measurable accumulation of Gd, further reinforcing the conclusion that very limited or no removal at all of Gd-alloy has happened during degradation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

This article summarizes developments attained in oral vaccine formulations based on the encapsulation of antigen proteins inside porous silica matrices. These vaccine vehicles show great efficacy in protecting the proteins from the harsh acidic stomach medium, allowing the Peyer's patches in the small intestine to be reached and consequently enhancing immunity. Focusing on the pioneering research conducted at the Butantan Institute in Brazil, the optimization of the antigen encapsulation yield is reported, as well as their distribution inside the meso- and macroporous network of the porous silica. As the development of vaccines requires proper inclusion of antigens in the antibody cells, X-ray crystallography is one of the most commonly used techniques to unveil the structure of antibody-combining sites with protein antigens. Thus structural characterization and modelling of pure antigen structures, showing different dimensions, as well as their complexes, such as silica with encapsulated hepatitis B virus-like particles and diphtheria anatoxin, were performed using small-angle X-ray scattering, X-ray absorption spectroscopy, X-ray phase contrast tomography, and neutron and X-ray imaging. By combining crystallography with dynamic light scattering and transmission electron microscopy, a clearer picture of the proposed vaccine complexes is shown. Additionally, the stability of the immunogenic complex at different pH values and temperatures was checked and the efficacy of the proposed oral immunogenic complex was demonstrated. The latter was obtained by comparing the antibodies in mice with variable high and low antibody responses., (© Márcia Carvalho de Abreu Fantini et al. 2022.)

Root water uptake is an essential process for terrestrial plants that strongly affects the spatiotemporal distribution of water in vegetated soil. Fast neutron tomography is a recently established non-invasive imaging technique capable to capture the 3D architecture of root systems in situ and even allows for tracking of three-dimensional water flow in soil and roots. We present an in vivo analysis of local water uptake and transport by roots of soil-grown maize plants-for the first time measured in a three-dimensional time-resolved manner. Using deuterated water as tracer in infiltration experiments, we visualized soil imbibition, local root uptake, and tracked the transport of deuterated water throughout the fibrous root system for a day and night situation. This revealed significant differences in water transport between different root types. The primary root was the preferred water transport path in the 13-days-old plants while seminal roots of comparable size and length contributed little to plant water supply. The results underline the unique potential of fast neutron tomography to provide time-resolved 3D in vivo information on the water uptake and transport dynamics of plant root systems, thus contributing to a better understanding of the complex interactions of plant, soil and water.

The neutron imaging instrument CONRAD was operated as a part of the user program of the research reactor BER-II at Helmholtz-Zentrum Berlin (HZB) from 2005 to 2020. The instrument was designed to use the neutron flux from the cold source of the reactor, transported by a curved neutron guide. The pure cold neutron spectrum provided a great advantage in the use of different neutron optical components such as focusing lenses and guides, solid-state polarizers, monochromators and phase gratings. The flexible setup of the instrument allowed for implementation of new methods including wavelength-selective, dark-field, phase-contrast and imaging with polarized neutrons. In summary, these developments helped to attract a large number of scientists and industrial customers, who were introduced to neutron imaging and subsequently contributed to the expansion of the neutron imaging community.

The temporally and spatially resolved tracking of lithium intercalation and electrode degradation processes are crucial for detecting and understanding performance losses during the operation of lithium-batteries. Here, high-throughput X-ray computed tomography has enabled the identification of mechanical degradation processes in a commercial Li/MnO 2 primary battery and the indirect tracking of lithium diffusion; furthermore, complementary neutron computed tomography has identified the direct lithium diffusion process and the electrode wetting by the electrolyte. Virtual electrode unrolling techniques provide a deeper view inside the electrode layers and are used to detect minor fluctuations which are difficult to observe using conventional three dimensional rendering tools. Moreover, the 'unrolling' provides a platform for correlating multi-modal image data which is expected to find wider application in battery science and engineering to study diverse effects e.g. electrode degradation or lithium diffusion blocking during battery cycling.

In various kinds of radiography, deficient transmission imaging may occur due to backlighting inside the detector itself arising from light or radiation scattering. The related intensity mismatches barely disturb the high resolution contrast, but its long range nature results in reduced attenuation levels which are often disregarded. Based on X-ray observations and an empirical formalism, a procedure is developed for a first order correction of detector backlighting. A backlighting factor is modeled as a function of the relative detector coverage by the sample projection. Different cases of sample transmission are regarded at different backlight factors and detector coverage. The additional intensity of backlighting may strongly affect the values of materials' attenuation up to a few 10%. The presented scenario provides a comfortable procedure for corrections of X-ray or neutron transmission imaging data.

Here, we report on a new record in the acquisition time for fast neutron tomography. With an optimized imaging setup, it was possible to acquire single radiographic projection images with 10 ms and full tomographies with 155 projections images and a physical spatial resolution of 200 µm within 1.5 s. This is about 6.7 times faster than the current record. We used the technique to investigate the water infiltration in the soil with a living lupine root system. The fast imaging setup will be part of the future NeXT instrument at ILL in Grenoble with a great field of possible future applications.

We herein report on using a compact and low cost scintillator-camera based neutron detection system for quantitative time-of-flight imaging applications. While powerful pulsed neutron sources emerge and enable unprecedented scientific achievements, one bottleneck is the availability of suitable detectors that provide high count- and high frame- rate capabilities. For imaging applications the achievable spatial resolution/pixel size is obviously another key characteristic. While major effort was so far directed towards the development of neutron counting type imaging detectors, this work demonstrates that a camera based detector system as commonly employed at steady state sources can also be used if a suitable camera is utilized. This is demonstrated at the ESS test beamline (V20) at Helmholtz-Zentrum Berlin by recording the time-of-flight transmission spectrum of steel samples using a CMOS camera at 1 kHz frame rate, revealing the characteristic Bragg edge pattern. This 'simple' setup in the current state presents a useful option of neutron detection and has the potential to overcome many of the existing limitations and could provide a reliable alternative for neutron detector technology in general, given that the camera and scintillator technology keep up the current development speed.

Operando laboratory X-ray radiographies were carried out for imaging of two different silver-based gas diffusion electrodes containing an electroconductive Ni mesh structure, one gas diffusion electrode composed of 95 wt.% Ag and 5 wt.% polytetrafluoroethylene and one composed of 97 wt.% Ag and 3 wt.% polytetrafluoroethylene, under different operating parameters. Thereby, correlations of their electrochemical behavior and the transport of the 30 wt.% NaOH electrolyte through the gas diffusion electrodes were revealed. The work was divided into two parts. In the first step, the microstructure of the gas diffusion electrodes was analyzed ex situ by a combination of focused ion beam technology and synchrotron as well as laboratory X-ray tomography and radiography. In the second step, operando laboratory X-ray radiographies were performed during chronoamperometric measurements at different potentials. The combination of the ex situ microstructural analyses and the operando measurements reveals the impact of the microstructure on the electrolyte transport through the gas diffusion electrodes. Hence, an impact of the Ni mesh structure within the gas diffusion electrode on the droplet formation could be shown. Moreover, it could be observed that increasing overpotentials cause increasing electrolyte transport velocities and faster droplet formation due to electrowetting. In general, higher electrolyte transport velocities were found for the gas diffusion electrode with 97 wt.% Ag in contrast to that with 95 wt.% Ag.

All the major clades of angiosperms have a fossil record that extends back to more than 100 million years ago (Early Cretaceous), mostly in agreement with molecular dating. However, the Early Cretaceous record of monocots is very poor compared to other angiosperms. Their herbaceous nature has been invoked to explain this rarity, but biogeography could also be an explanation. Unfortunately, most of the Early Cretaceous angiosperm record comes from northern mid-latitudes. The Crato plattenkalk limestone offers a unique window into the Early Cretaceous vegetation of the tropics and has already yielded monocot fossils. Here, we describe a whole monocotyledonous plant from root to reproductive organs that is anatomically preserved. The good preservation of the fossils allowed the evaluation of reproductive, vegetative and anatomical characteristics of monocots, leading to a robust identification of this fossil as a crown monocot. Its occurrence in Northern Gondwana supports the possibility of an early radiation of monocots in the tropics.

Innovative solutions have been designed to meet the global demand for energy and environmental sustainability, such as enhanced hydrocarbon recovery and geo-sequestration of CO 2 . These processes involve the movement of immiscible fluids through permeable rocks, which is affected by the interfacial properties of rocks at the pore scale. Overcoming major challenges in these processes relies on a deeper understanding about the fundamental factors that control the rock wettability. In particular, the efficiency of oil recovery strategies depends largely on the 3D wetting pattern of reservoir rocks, which is in turn affected by the adsorption and deposition of 'contaminant' molecules on the pores' surface. Here, we combined high-resolution neutron tomography (NT) and synchrotron X-ray tomography (XRT) to probe the previously unobserved 3D distribution of molecular and mineralogical heterogeneity of oil reservoir rocks at the pore scale. Retrieving the distribution of neutron attenuation coefficients by Monte Carlo simulations, 3D molecular chemical mappings with micrometer dimensions could be provided. This approach allows us to identify co-localization of mineral phases with chemically distinct hydrogen-containing molecules, providing a solid foundation for the understanding of the interfacial phenomena involved in multiphase fluid flow in permeable media.

Most epiphytic bromeliads, especially those in the genus Tillandsia, lack functional roots and rely on the absorption of water and nutrients by large, multicellular trichomes on the epidermal surfaces of leaves and stems. Another important function of these structures is the spread of water over the epidermal surface by capillary action between trichome "wings" and epidermal surface. Although critical for the ultimate absorption by these plants, understanding of this function of trichomes is primarily based on light microscope observations. To better understand this phenomenon, the distribution of water was followed by its attenuation of cold neutrons following application of H 2 O to the cut end of Tillandsia usneoides shoots. Experiments confirmed the spread of added water on the external surfaces of this "atmospheric" epiphyte. In a morphologically and physiologically similar plant lacking epidermal trichomes, water added to the cut end of a shoot clearly moved via its internal xylem and not on its epidermis. Thus, in T. usneoides, water moves primarily by capillarity among the overlapping trichomes forming a dense indumentum on shoot surfaces, while internal vascular water movement is less likely. T. usneoides, occupying xeric microhabitats, benefits from reduction of water losses by low-shoot xylem hydraulic conductivities., (© 2018 John Wiley & Sons Ltd.)

Developing a technology that enables oral vaccines to work efficiently remains a considerable effort since a number of difficulties must be addressed. The key objective being to ensure the safe passage through the harsh conditions within the gastrointestinal tract, promoting delivery that induces enhanced immune response. In the particular case of hepatitis B, the oral formulation in the nanostructured silica SBA-15 is a viable approach. As a result of its porous structure, low toxicity and structural stability, SBA-15 is capable to protect and release the hepatitis B surface antigen (HBsAg), used in the vaccination scheme, at the desired destination. Furthermore, when compared to the currently used injection based delivery method, better or similar antibody response has been observed. However, information about the organisation of the antigen protein remains unknown. For instance, HBsAg is too large to enter the 10 nm ordered mesopores of SBA-15 and has a tendency to agglomerate when protected by the delivery system. Here we report on the pH dependence of HBsAg aggregation in saline solution investigated using small angle X-rays scattering that resulted in an optimisation of the encapsulation conditions. Additionally, X-ray microscopy combined with neutron and X-ray tomography provided full 3D information of the HBsAg clustering (i.e. agglomeration) inside the SBA-15 macropores. This method enables the visualisation of the organisation of the antigen in the interior of the delivery system, where agglomerated HBsAg coexists with its immunological effective uniformly distributed counterpart. This new approach, to be taken into account while preparing the formulation, can greatly help in the understanding of clinical studies and advance new formulations.

The internal microstructure of a silicon electrode in a lithium ion battery was visualized by operando synchrotron X-ray radioscopy during battery cycling. The silicon particles were found to change their sizes upon lithiation and delithiation and the changes could be quantified. It was found that volume change of a particle is related to its initial size and is also largely determined by the changing surrounding electron-conductive network and internal interface chemical environment (e.g., electrolyte migration, solid-electrolyte interphase propagation) within fractured particles. Moreover, an expansion prolongation phenomenon was discovered whereby some particles continue expanding even after switching the battery current direction and shrinkage would be expected, which is explained by assuming different expansion characteristics of particle cores and outer regions. The study provides new basic insights into processes inside Si particles during lithiation and delithiation and also demonstrates the unique possibilities of operando synchrotron X-ray imaging for studying degradation mechanisms in battery materials., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The mobility of magnetic domains forms the link between the basic physical properties of a magnetic material and its global characteristics such as permeability and saturation field. Most commonly, surface domain structure are studied using magneto-optical Kerr microscopy. The limited information depth of approx. 20 nanometers, however, allows only for an indirect interpretation of the internal volume domain structures. Here we show how accumulative high-frame rate dynamic neutron dark-field imaging is able for the first time to visualize the dynamic of the volume magnetic domain structures in grain oriented electrical steel laminations at power frequencies. In particular we studied the volume domain structures with a spatial resolution of ∼100 μm and successfully quantified domain sizes, wall velocities, domain annihilation and its duration and domain wall multiplication in real time recordings at power frequencies of 10, 25 and 50 Hz with ±262.5 A/m and ±525 A/m (peak to peak) applied field.

Knowing the distribution of a magnetic field in bulk materials is important for understanding basic phenomena and developing functional magnetic materials. Microscopic imaging techniques employing X-rays, light, electrons, or scanning probe methods have been used to quantify magnetic fields within planar thin magnetic films in 2D or magnetic vector fields within comparable thin volumes in 3D. Some years ago, neutron imaging has been demonstrated to be a unique tool to detect magnetic fields and magnetic domain structures within bulk materials. Here, we show how arbitrary magnetic vector fields within bulk materials can be visualized and quantified in 3D using a set of nine spin-polarized neutron imaging measurements and a novel tensorial multiplicative algebraic reconstruction technique (TMART). We first verify the method by measuring the known magnetic field of an electric coil and then investigate the unknown trapped magnetic flux within the type-I superconductor lead.

We present non-destructive and non-invasive in operando X-ray tomographic investigations of the charge and discharge behavior of rechargeable alkaline-manganese (RAM) batteries (Zn-MnO₂ batteries). Changes in the three-dimensional structure of the zinc anode and the MnO₂ cathode material after several charge/discharge cycles were analyzed. Battery discharge leads to a decrease in the zinc particle sizes, revealing a layer-by-layer dissolving behavior. During charging, the particles grow again to almost their initial size and shape. After several cycles, the particles sizes slowly decrease until most of the particles become smaller than the spatial resolution of the tomography. Furthermore, the number of cracks in the MnO₂ bulk continuously increases and the separator changes its shape. The results are compared to the behavior of a conventional primary cell that was also charged and discharged several times.

Various medicinal plants are threatened with extinction owing to their over-exploitation and the prevalence of soil borne pathogens. In this study, soils infected with root-rot pathogens, which prevent continuous-cropping, were treated with an electron beam. The level of soil-borne fungus was reduced to ≤0.01% by soil electron beam treatment without appreciable effects on the levels of antagonistic microorganism or on the physicochemical properties of the soil. The survival rate of 4-year-old plant was higher in electron beam-treated soil (81.0%) than in fumigated (62.5%), virgin (78%), or untreated-replanting soil (0%). Additionally, under various soils conditions, neutron tomography permitted the monitoring of plant health and the detection of root pathological changes over a period of 4-6 years by quantitatively measuring root water content in situ. These methods allow continual cropping on the same soil without pesticide treatment. This is a major step toward the environmentally friendly production of endangered therapeutic herbs.

In the present study, we report a new setup for polarized neutron imaging at the ORNL High Flux Isotope Reactor CG-1D beamline using an in situ 3 He polarizer and analyzer. This development is very important for extending the capabilities of the imaging instrument at ORNL providing a polarized beam with a large field-of-view, which can be further used in combination with optical devices like Wolter optics, focusing guides, or other lenses for the development of microscope arrangement. Such a setup can be of advantage for the existing and future imaging beamlines at the pulsed neutron sources. The first proof-of-concept experiment is performed to study the ferromagnetic phase transition in the Fe 3 Pt sample. We also demonstrate that the polychromatic neutron beam in combination with in situ 3 He cells can be used as the initial step for the rapid measurement and qualitative analysis of radiographs.

Water infiltration in soil is not only affected by the inherent heterogeneities of soil, but even more by the interaction with plant roots and their water uptake. Neutron tomography is a unique non-invasive 3D tool to visualize plant root systems together with the soil water distribution in situ. So far, acquisition times in the range of hours have been the major limitation for imaging 3D water dynamics. Implementing an alternative acquisition procedure we boosted the speed of acquisition capturing an entire tomogram within 10 s. This allows, for the first time, tracking of a water front ascending in a rooted soil column upon infiltration of deuterated water time-resolved in 3D. Image quality and resolution could be sustained to a level allowing for capturing the root system in high detail. Good signal-to-noise ratio and contrast were the key to visualize dynamic changes in water content and to localize the root uptake. We demonstrated the ability of ultra-fast tomography to quantitatively image quick changes of water content in the rhizosphere and outlined the value of such imaging data for 3D water uptake modelling. The presented method paves the way for time-resolved studies of various 3D flow and transport phenomena in porous systems.

Corticaria amberica sp. nov. (Coleoptera: Latridiidae) from Baltic amber is described and illustrated using the features of the male genitalia. To study these features, phase-contrast synchrotron microtomography was used for the first time with a member of this family. A literature-based checklist of fossil and subfossil Latridiidae is provided. The following new synonymy is established: Latridius alexeevi Bukejs, Kirejtshuk & Rücker, 2011 = Latridius usovae Sergi & Perkovsky, 2014 syn. nov. New fossil records for the species Latridius alexeevi Bukejs, Kirejtshuk & Rücker, Latridius jantaricus Borowiec, Revelieria groehni Sergi, Perkovsky & Reike, and Corticarina palaeominuta Reike are also presented.

Cetaceans face the challenge of maintaining equilibrium underwater and obtaining sensory input within a dense, low-visibility medium. The cetacean ear represents a key innovation that marked their evolution from terrestrial artiodactyls to among the most fully aquatic mammals in existence. Using micro-CT and histological data, we document shape and size changes in the cetacean inner ear during ontogeny, and demonstrate that, as a proportion of gestation time, the cetacean inner ear is precocial in its growth compared with that of suid artiodactyls. Cetacean inner ears begin ossifying and reach near-adult shape as early as at 32% of the gestation period, and near-adult dimensions as early as at 27% newborn total length. Our earliest embryos with measurable inner ears (13% newborn length) exhibit a flattened cochlea (i.e. smaller distance from cochlear apex to round window) compared with later and adult stages. Inner ears of Sus scrofa have neither begun ossifying nor reached near-adult dimensions at 55% of the gestation period, but have an adult-like ratio of cochlear diameters to each other, suggesting an adult-like shape. The precocial development of the cetacean inner ear complements previous work demonstrating precocial development of other cetacean anatomical features such as the locomotor muscles to facilitate swimming at the moment of birth., (© 2016 Anatomical Society.)

The lithiation and delithiation mechanisms of multiple-Sn particles in a customized flat radiography cell were investigated by in situ synchrotron radiography. For the first time, four (de)lithiation phenomena in a Sn-electrode battery system are highlighted: 1) the (de)lithiation behavior varies between different Sn particles, 2) the time required to lithiate individual Sn particles is markedly different from the time needed to discharge the complete battery, 3) electrochemical deactivation of originally electrochemically active particles is reported, and 4) a change of electrochemical behavior of individual particles during cycling is found and explained by dynamic changes of (de)lithiation pathways amongst particles within the electrode. These unexpected findings fundamentaly expand the understanding of the underlying (de)lithiation mechanisms inside commercial lithium-ion batteries (LIBs) and would open new design principles for high-performance next-generation LIBs., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Gas generation within lithium ion batteries (LIBs) gives rise to safety concerns that question their applicability. By employing synchrotron X-ray imaging, the gas and channel evolution occurring in an operating LIB have been directly visualized in their inherent 3D state as a function of discharge and charge. Using the spatial 3D distribution of gas bubbles and channels, the active particles that dictate the performance of a functional LIB were identified and visualized in 3D. Delithiation and lithiation are interpreted as the process of activating particles continuously in a step-by-step way. The present work not only demonstrates the generation and evolution of gas within LIB in 3D, but also reveals the distribution of active particles for the first time. These fundamentally findings presented here shed light on a range of processes that could not previously be characterized in 3D and can provide practical guidance for the design of next-generation LIBs with improved safety.

The ectotympanic, malleus and incus of the developing mammalian middle ear (ME) are initially attached to the dentary via Meckel's cartilage, betraying their origins from the primary jaw joint of land vertebrates. This recapitulation has prompted mostly unquantified suggestions that several suspected--but similarly unquantified--key evolutionary transformations leading to the mammalian ME are recapitulated in development, through negative allometry and posterior/medial displacement of ME bones relative to the jaw joint. Here we show, using µCT reconstructions, that neither allometric nor topological change is quantifiable in the pre-detachment ME development of six marsupials and two monotremes. Also, differential ME positioning in the two monotreme species is not recapitulated. This challenges the developmental prerequisites of widely cited evolutionary scenarios of definitive mammalian middle ear (DMME) evolution, highlighting the requirement for further fossil evidence to test these hypotheses. Possible association between rear molar eruption, full ME ossification and ME detachment in marsupials suggests functional divergence between dentary and ME as a trigger for developmental, and possibly also evolutionary, ME detachment. The stable positioning of the dentary and ME supports suggestions that a 'partial mammalian middle ear' as found in many mammaliaforms--probably with a cartilaginous Meckel's cartilage--represents the only developmentally plausible evolutionary DMME precursor., (© 2016 The Author(s).)

We investigated if and how the inner ear region undergoes similar adaptations in small, fossorial, insectivoran-grade mammals, and found a variety of inner ear phenotypes. In our sample, afrotherian moles (Chrysochloridae) and the marsupial Notoryctes differ from most other burrowing mammals in their relatively short radii of semicircular canal curvature; chrysochlorids and fossorial talpids share a relatively long interampullar width. Chrysochlorids are unique in showing a highly coiled cochlea with nearly four turns. Extensive cochlear coiling may reflect their greater ecological dependence on low frequency auditory cues compared to talpids, tenrecids, and the marsupial Notoryctes. Correspondingly, the lack of such extensive coiling in the inner ear of other fossorial species may indicate a greater reliance on other senses to enable their fossorial lifestyle, such as tactile sensation from vibrissae and Eimer's organs. The reliance of chrysochlorids on sound is evident in the high degree of coiling and in the diversity of its mallear types, and may help explain the lack of any semiaquatic members of that group. The simplest mallear types among chrysochlorids are not present in the basal-most members of that clade, but all extant chrysochlorids investigated to date exhibit extensive cochlear coiling. The chrysochlorid ear region thus exhibits mosaic evolution; our data suggest that extensive coiling evolved in chrysochlorids prior to and independently of diversification in middle ear ossicle size and shape., (© 2015 Wiley Periodicals, Inc.)

Being descendants of small terrestrial ungulate mammals, whales underwent enormous transformations during their evolutionary history, that is, extensive changes in anatomy, physiology, and behavior were evolved during secondary adaptations to life in water. However, still only little is known about whale ontogenetic development, which help to identify the timing and sequence of critical evolutionary events, such as modification of the cetacean ear. This is particularly true for baleen whales (Mysticeti), the group including the humpback whale Megaptera novaeangliae. We use high-resolution X-ray computed tomography to reinvestigate humpback whale fetuses from the Kükenthal collection at the Museum für Naturkunde, Berlin, thus, extending historic descriptions of their skeletogenesis and providing for the first time sequences of cranial ossification for this species. Principally, the ossification sequence of prenatal Megaptera follows a typical mammalian pattern with the anterior dermal bones being the first ossifying elements in the skull, starting with the dentary. In contrast to other mammals, the ectotympanic bone ossifies at an early stage. Alveolar structure can be observed in both the maxillae and dentaries in these early prenatal specimens but evidence for teeth is lacking. Although the possibility of obtaining new embryological material is unlikely due to conservation issues, our study shows that reexamination of existing specimens employing new technologies still holds promise for filling gaps in our knowledge of whale evolution and ontogeny., (© 2015 Wiley Periodicals, Inc.)

The development of dental materials with improved properties and increased longevity can save costs and minimize discomfort for patients. Due to their good biocompatibility, glass ionomer cements are an interesting restorative option. However, these cements have limited mechanical strength to survive in the challenging oral environment. Therefore, a better understanding of the structure and hydration process of these cements can bring the necessary understanding to further developments. Neutrons and X-rays have been used to investigate the highly complex pore structure, as well as to assess the hydrogen mobility within these cements. Our findings suggest that the lower mechanical strength in glass ionomer cements results not only from the presence of pores, but also from the increased hydrogen mobility within the material. The relationship between microstructure, hydrogen mobility and strength brings insights into the material's durability, also demonstrating the need and opening the possibility for further research in these dental cements.

Nondestructive 3D mapping of crystallographic phases is introduced providing distribution of phase fractions within the bulk (centimeter range) of samples with micrometer-scale resolution. The novel neutron tomography based technique overcomes critical limitations of existing techniques and offers a wide range of potential applications. It is demonstrated for steel samples exhibiting phase transformation after being subjected to tensile and torsional deformation., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background and Aims: Cold neutron radiography was applied to directly observe embolism in conduits of liana stems with the aim to evaluate the suitability of this method for studying embolism formation and repair. Potential advantages of this method are a principally non-invasive imaging approach with low energy dose compared with synchrotron X-ray radiation, a good spatial and temporal resolution, and the possibility to observe the entire volume of stem portions with a length of several centimetres at one time., Methods: Complete and cut stems of Adenia lobata, Aristolochia macrophylla and Parthenocissus tricuspidata were radiographed at the neutron imaging facility CONRAD at the Helmholtz-Zentrum Berlin für Materialien und Energie, with each measurement cycle lasting several hours. Low attenuation gas spaces were separated from the high attenuation (water-containing) plant tissue using image processing., Key Results: Severe cuts into the stem were necessary to induce embolism. The formation and temporal course of an embolism event could then be successfully observed in individual conduits. It was found that complete emptying of a vessel with a diameter of 100 µm required a time interval of 4 min. Furthermore, dehydration of the whole stem section could be monitored via decreasing attenuation of the neutrons., Conclusions: The results suggest that cold neutron radiography represents a useful tool for studying water relations in plant stems that has the potential to complement other non-invasive methods.

Previous analyses of how mammals vary in their ossification sequences have focused on monotremes, marsupials, and boreoeutherian placentals. Here, we focus on the sequence of cranial and postcranial ossification events during growth in the xenarthran skull and skeleton, including armadillos, anteaters, and sloths. We use two different methods to quantify sequence heterochrony: sequence analysis of variance (ANOVA) and event-paring/Parsimov. Our results indicate that Parsimov is conservative and does not detect clear heterochronic shifts between xenarthran and boreoeutherian placentals. Sequence-ANOVA performs better, but both methods exhibit sensitivity to the artifactual accumulation of ties. By controlling for ties and taking into account results that the methods have in common, our analysis suggests that xenarthrans significantly differ from other placentals by a late ossification of the sternum and an early ossification of the phalanges and pubis. We interpret these differences as showing that heterochrony plays a role in the skeletal development of xenarthrans, a change from previous studies that have emphasized the developmental homogeneity of the skeleton across placental mammals., (© 2011 Wiley Periodicals, Inc.)

Amphisbaenia is a speciose clade of fossorial lizards characterized by a snake-like body and a strongly reinforced skull adapted for head-first burrowing. The evolutionary origins of amphisbaenians are controversial, with molecular data uniting them with lacertids, a clade of Old World terrestrial lizards, whereas morphology supports a grouping with snakes and other limbless squamates. Reports of fossil stem amphisbaenians have been falsified, and no fossils have previously tested these competing phylogenetic hypotheses or shed light on ancestral amphisbaenian ecology. Here we report the discovery of a new lacertid-like lizard from the Eocene Messel locality of Germany that provides the first morphological evidence for lacertid-amphisbaenian monophyly on the basis of a reinforced, akinetic skull roof and braincase, supporting the view that body elongation and limblessness in amphisbaenians and snakes evolved independently. Morphometric analysis of body shape and ecology in squamates indicates that the postcranial anatomy of the new taxon is most consistent with opportunistically burrowing habits, which in combination with cranial reinforcement indicates that head-first burrowing evolved before body elongation and may have been a crucial first step in the evolution of amphisbaenian fossoriality.

Patterns of vertebral variation across mammals have seldom been quantified, making it difficult to test hypotheses of covariation within the axial skeleton and mechanisms behind the high level of vertebral conservatism among mammals. We examined variation in vertebral counts within 42 species of mammals, representing monotremes, marsupials and major clades of placentals. These data show that xenarthrans and afrotherians have, on average, a high proportion of individuals with meristic deviations from species' median series counts. Monotremes, xenarthrans, afrotherians and primates show relatively high variation in thoracolumbar vertebral count. Among the clades sampled in our dataset, rodents are the least variable, with several species not showing any deviations from median vertebral counts, or vertebral anomalies such as asymmetric ribs or transitional vertebrae. Most mammals show significant correlations between sacral position and length of the rib cage; only a few show a correlation between sacral position and number of sternebrae. The former result is consistent with the hypothesis that adult axial skeletal structures patterned by distinct mesodermal tissues are modular and covary; the latter is not. Variable levels of correlation among these structures may indicate that the boundaries of prim/abaxial mesodermal precursors of the axial skeleton are not uniform across species. We do not find evidence for a higher frequency of vertebral anomalies in our sample of embryos or neonates than in post-natal individuals of any species, contrary to the hypothesis that stabilizing selection plays a major role in vertebral patterning., (© 2011 The Authors. Journal of Evolutionary Biology © 2011 European Society For Evolutionary Biology.)

There is increasing demand to functionalize meso- and nanoporous materials by coating and make the porous substrate biocompatible or environmentally friendly. However, coating on a meso-porous substrate poses great challenges, especially if the pore aspect ratio is high. We adopted the pulsed laser deposition (PLD) method to coat Ni(3)Al-based meso-porous membranes, which were fabricated from a single-crystal Ni-based superalloy by a unique selective phase dissolution technique. These membranes were about 250 µm thick and had channel-like pores (∼200 nm wide) with very high aspect ratio. Two different coating materials, i.e. diamond-like carbon (DLC) and titanium, were used to coat these membranes. High energy C or Ti ions, produced in the plasma plume by the PLD process, penetrated the channel-like pores and deposited coatings on the pore walls deep inside the membrane. The thickness and the quality of coatings on the pore walls were examined using the dual-beam system. The coating thickness, of the order of 50 nm, was adherent to the pore walls and was quite uniform at different depths. The carbon and the Ti deposition behaved quite similarly. The preliminary experiments showed that the PLD is an adequate method for coating fine open cavities of complex geometry. Simulations based on stopping and the range of ions in matter (SRIM) calculations helped in understanding the deposition processes on pore walls at great depths.

At the reactor FRM at Technical University of Munich energy-selective neutron radiography and tomography experiments were performed. For an energy separation of the neutrons from the primary beam a mechanical velocity selector was used. The radiography images show a different contrast of the investigated elements for neutron energies below and above their Bragg-cutoff energy. A comparison between the standard and energy-selective neutron tomography is presented. In spite of a reduction of the neutron intensity due to the velocity selector technique a realistic experimental time in order of some hours for the tomography experiment was achieved.

Optimisation studies on the layout of a SbBe neutron source for application in mobile thermal neutron radiography or tomography measurements have been performed using MCNP and shielding calculations. Results and the actual status in the set-up of the source are presented.

For many neutron tomography setups, the maximum sample size for tomography is limited by a comparatively small beam cross section. However, it is not well known outside the medical field that it is possible to perform region-of-interest tomography of sections inside the object that fit into the beam and detector area. Approximately valid reconstruction data appear in a circle with a diameter of approximately the detector width, but with incomplete data and strong artifacts outside that circle. These artifacts can be removed either by mathematical means or by simple geometrical cutting of the reconstructed data, enabling the examination of samples bigger than the detector or beam area.

The paper describes how hydrogenous materials can be investigated with state-of-the-art neutron radiography detection methods. The methodical problems for a precise quantification and steps towards their solution are demonstrated. Based on several practical examples, the diversity of problems to be solved by neutron imaging is illustrated.