Search

Objectives: The aim of this study was to analyze and compare the imaging features of osteomyelitis according to the presence or absence of antiresorptive medications by using computed tomography (CT)., Study Design: We retrospectively reviewed the records of 270 patients with osteomyelitis (83 males and 187 females; average age 66.6 years). CT imaging features were analyzed, and imaging and demographic features were compared between the medication-related osteomyelitis (MROM) group and the medication-unrelated osteomyelitis (MUOM) group., Results: Trabecular defects, cortical defects, sclerosis, and sequestra were detected in the majority of patients, whereas periosteal new bone formation was less common. The MROM group exhibited sequestra and periosteal new bone formation more frequently on CT images, but the size and appearance of the sequestra and type of periosteal new bone were not significantly different between the 2 groups., Conclusions: Sequestra and periosteal new bone formation were characteristic CT features of osteomyelitis more commonly found in the medication-related condition. These findings may be useful in the evaluation of osteomyelitis and medication-related osteonecrosis of the jaw., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Background: The aim of the present study was to evaluate the effectiveness of intraductal irrigation using normal saline in chronic obstructive sialadenitis., Methods: Patients who had one of the following symptoms were recruited: pain, swelling, stiffness, and dry mouth. A total of 58 salivary glands in 33 patients were diagnosed as having sialadenitis using sialography and ultrasonography. The patients were divided into two groups (swelling group and dry mouth group), according to the major complaint. Repeated intraductal irrigation was performed on each gland. Difference of symptom severity evaluated using numerical rating scale (NRS), and ductal width measured using ultrasonography were compared between the two groups., Results: The average NRS score was significantly decreased from 6.0 to 3.3 after 3-5 visits of intraductal irrigation (P < 0.05). The reduction in NRS was greater in the swelling group than in the dry mouth group, although the difference between the groups was not statistically significant. There was no change of ductal width before and after the irrigation., Conclusions: Intraductal irrigation according to this study method using normal saline is a simple treatment for the patients with chronic obstructive sialadenitis. It provides a conservative treatment option reducing the subjective symptoms.

Molar-incisor malformation (MIM) is a recently defined dental abnormality of molar root and incisors, and introduced as one of the causes of periapical and periodontal abscess. The purpose of this study was to investigate the clinical and radiological features of MIM, with special emphasis on various medical history. A total of 38 patients with MIM were included in this study. Radiographic features and clinical data, including medical history, chief complaint, associated complications, treatment, and prognosis, were retrospectively investigated. On radiographs, the affected molars showed short, slender, underdeveloped roots and constricted pulp chambers. All affected incisors and canines exhibited dilacerated short roots, wedge-shaped defect on the cervical part of the crown. Complications included periodontal bone loss (52.6%), endodontic lesion (50.0%), and endodontic-periodontal lesion (28.9%). The medical histories of the patients with MIM indicate that almost all (94.7%) were hospitalized due to problems during the neonatal period. MIM may cause various dental problems, such as periapical and periodontal abscess and early loss of the affected teeth. The early diagnosis of MIM on radiographs and appropriate treatment will contribute to a favorable prognosis, especially for young and adolescent patients.

Differential diagnosis of Langerhans Cell Histiocytosis (LCH) in the jaw is essential for early treatment including systemic therapy. Records of 17 patients (6 men and 11 women; mean age, 14 years) with histologically confirmed LCH were reviewed. All the lesions occurred in the mandible. Most of the cases (n=12) were intraosseous type LCH, only 5 patients had alveolar type LCH. Patients complained of facial swelling and pain most likely. In the 14 patients who underwent CT and/or MR imaging, all LCH lesions were osteolytic, with a mean size of 23 mm. LCH presented as expansile lesions with periosteal new bone formation, perilesional sclerosis, fluid attenuation/signal within the lesion, and inflammatory changes in adjacent soft tissues on CT/MR images. Considering the major symptoms of LCH were swelling and pain, the differential diagnosis of LCH from osteomyelitis might be more difficult. The differential diagnosis for osteolytic lesions of the jaw with surrounding inflammatory changes should include LCH, especially in young patients.

It is essential to reposition the mandibular proximal segment (MPS) as close to its original position as possible during orthognathic surgery. Conventional methods cannot pinpoint the exact position of the condyle in the fossa in real time during repositioning. In this study, based on an improved registration method and a separable electromagnetic tracking tool, we developed a real-time, augmented, model-guided method for MPS surgery to reposition the condyle into its original position more accurately. After virtual surgery planning, using a complex maxillomandibular model, the final position of the virtual MPS model was simulated via 3D rotations. The displacements resulting from the MPS simulation were applied to the MPS landmarks to indicate their final postoperative positions. We designed a new registration body with 24 fiducial points for registration, and determined the optimal point group on the registration body through a phantom study. The registration between the patient's CT image and physical spaces was performed preoperatively using the optimal points. We also developed a separable frame for installing the electromagnetic tracking tool on the patient's MPS. During MPS surgery, the electromagnetic tracking tool was repeatedly attached to, and separated from, the MPS using the separable frame. The MPS movement resulting from the surgeon's manipulation was tracked by the electromagnetic tracking system. The augmented condyle model and its landmarks were visualized continuously in real time with respect to the simulated model and landmarks. Our method also provides augmented 3D coronal and sagittal views of the fossa and condyle, to allow the surgeon to examine the 3D condyle-fossa positional relationship more accurately. The root mean square differences between the simulated and intraoperative MPS models, and between the simulated and postoperative CT models, were 1.71 ± 0.63 mm and 1.89 ± 0.22 mm respectively at three condylar landmarks. Thus, the surgeons could perform MPS repositioning conveniently and accurately based on real-time augmented model guidance on the 3D condyle positional relationship with respect to the glenoid fossa, using augmented and simulated models and landmarks., (Copyright © 2018 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.)

Objectives: The aim of this study was to assess the relationship between mandibular condylar volume and disk displacement status in adult males and females., Study Design: We evaluated 122 temporomandibular joints in 61 patients using magnetic resonance imaging (MRI) and computed tomography (CT). MRI data were used to assign disk status as normal disk position (NR), disk displacement with reduction (DDR), or disk displacement without reduction (DDNR). CT data were used to calculate total condylar volume and its components, cortical volume, and trabecular volume. The relationships among condylar volume, disk status, and gender were tested with 2-way analysis of variance., Results: Condylar volumes significantly correlated with disk displacement, tending to decrease as displacement increased. There were significant differences in both total condylar volume and trabecular volume among the DD status (NR > DDR > DDNR), whereas cortical volume was significantly different only between NR/DDR and DDNR (NR/DDR > DDNR). The volume decreases associated with temporomandibular joint DD were found in both males and females, with greater decreases in men than in women as DD progressed., Conclusions: Condylar volumes are significantly associated with disk displacement status. Joints with nonreducing disks showed the smallest condylar volumes in both males and females., (Copyright © 2017 Elsevier Inc. All rights reserved.)

The purpose of this study was to develop a new method for enabling a robot to assist a surgeon in repositioning a bone segment to accurately transfer a preoperative virtual plan into the intraoperative phase in orthognathic surgery. We developed a robot system consisting of an arm with six degrees of freedom, a robot motion-controller, and a PC. An end-effector at the end of the robot arm transferred the movements of the robot arm to the patient's jawbone. The registration between the robot and CT image spaces was performed completely preoperatively, and the intraoperative registration could be finished using only position changes of the tracking tools at the robot end-effector and the patient's splint. The phantom's maxillomandibular complex (MMC) connected to the robot's end-effector was repositioned autonomously by the robot movements around an anatomical landmark of interest based on the tool center point (TCP) principle. The robot repositioned the MMC around the TCP of the incisor of the maxilla and the pogonion of the mandible following plans for real orthognathic patients. The accuracy of the robot's repositioning increased when an anatomical landmark for the TCP was close to the registration fiducials. In spite of this influence, we could increase the repositioning accuracy at the landmark by using the landmark itself as the TCP. With its ability to incorporate virtual planning using a CT image and autonomously execute the plan around an anatomical landmark of interest, the robot could help surgeons reposition bones more accurately and dexterously., (Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.)

In this study, correction of the maxillofacial deformities was performed by repositioning bone segments to an appropriate location according to the preoperative planning in orthognathic surgery. The surgery was planned using the patient's virtual skeletal models fused with optically scanned three-dimensional dentition. The virtual maxillomandibular complex (MMC) model of the patient's final occlusal relationship was generated by fusion of the maxillary and mandibular models with scanned occlusion. The final position of the MMC was simulated preoperatively by planning and was used as a goal model for guidance. During surgery, the intraoperative registration was finished immediately using only software processing. For accurate repositioning, the intraoperative MMC model was visualized on the monitor with respect to the simulated MMC model, and the intraoperative positions of multiple landmarks were also visualized on the MMC surface model. The deviation errors between the intraoperative and the final positions of each landmark were visualized quantitatively. As a result, the surgeon could easily recognize the three-dimensional deviation of the intraoperative MMC state from the final goal model without manually applying a pointing tool, and could also quickly determine the amount and direction of further MMC movements needed to reach the goal position. The surgeon could also perform various osteotomies and remove bone interference conveniently, as the maxillary tracking tool could be separated from the MMC. The root mean square (RMS) difference between the preoperative planning and the intraoperative guidance was 1.16 ± 0.34 mm immediately after repositioning. After surgery, the RMS differences between the planning and the postoperative computed tomographic model were 1.31 ± 0.28 mm and 1.74 ± 0.73 mm for the maxillary and mandibular landmarks, respectively. Our method provides accurate and flexible guidance for bimaxillary orthognathic surgery based on intraoperative visualization and quantification of deviations for simulated postoperative MMC and landmarks. The guidance using simulated skeletal models and landmarks can complement and improve conventional navigational surgery for bone repositioning in the craniomaxillofacial area., (Copyright © 2016 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.)

Objective: The purpose of this study was to evaluate the patient radiation dose based on panoramic radiography and calculated with personal computer-based Monte Carlo (PCXMC) software compared with thermoluminescent dosimetry (TLD) measurement. We also proposed appropriate input values for dose-determining factors in PCXMC., Study Design: Tissue-absorbed doses and the effective dose based on panoramic radiography were measured with TLD and with PCXMC under various conditions. The calculated PCXMC doses were compared with those measured with TLD., Results: The effective doses calculated with PCXMC were higher by 9.55% to 51.24% compared with the doses measured with TLD. Reference points on the Y-axis and Z-axis were the sensitive factors when calculating the effective dose. The differences between the highest and the lowest organ doses were 0.32 and 0.10 mGy, respectively, for PCXMC calculation and TLD measurement., Conclusions: The effective dose calculated with PCXMC was generally higher than the dose measured by using TLD, and the absorbed doses varied by organ more severely in the PCXMC calculations than in the TLD measurements. The effective dose obtained from PCXMC calculations was dependent on input values for dose-determining factors. Standard values for each dose-determining factor required for the application of PCXMC to panoramic radiography were suggested in this study., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Accidental overextension of filling material during endodontic treatment may cause mechanical and chemical irritation of the adjacent tissue. In this case series, seven patients who complained of neurologic complication after overextension of canal filling material during endodontic treatment were presented. Overextensions of filling material into the surrounding tissues, such as the mandibular canal, bone marrow, and submucosal layer, were confirmed with panoramic radiograph and computed tomographic images. When patients complain of neurological disturbances after root canal treatment, proper radiographic images should be taken to verify any overextension of materials and to determine the specific location of the overfilled materials.

Objectives: This study proposed a new automated screening system based on a hybrid genetic swarm fuzzy (GSF) classifier using digital dental panoramic radiographs to diagnose females with a low bone mineral density (BMD) or osteoporosis., Methods: The geometrical attributes of both the mandibular cortical bone and trabecular bone were acquired using previously developed software. Designing an automated system for osteoporosis screening involved partitioning of the input attributes to generate an initial membership function (MF) and a rule set (RS), classification using a fuzzy inference system and optimization of the generated MF and RS using the genetic swarm algorithm. Fivefold cross-validation (5-FCV) was used to estimate the classification accuracy of the hybrid GSF classifier. The performance of the hybrid GSF classifier has been further compared with that of individual genetic algorithm and particle swarm optimization fuzzy classifiers., Results: Proposed hybrid GSF classifier in identifying low BMD or osteoporosis at the lumbar spine and femoral neck BMD was evaluated. The sensitivity, specificity and accuracy of the hybrid GSF with optimized MF and RS in identifying females with a low BMD were 95.3%, 94.7% and 96.01%, respectively, at the lumbar spine and 99.1%, 98.4% and 98.9%, respectively, at the femoral neck BMD. The diagnostic performance of the proposed system with femoral neck BMD was 0.986 with a confidence interval of 0.942-0.998. The highest mean accuracy using 5-FCV was 97.9% with femoral neck BMD., Conclusions: The combination of high accuracy along with its interpretation ability makes this proposed automatic system using hybrid GSF classifier capable of identifying a large proportion of undetected low BMD or osteoporosis at its early stage.

Haemophilic pseudotumour is a rare disease that occurs most often in femur, tibia, ilium or pelvic bone of a patient with haemophilia. Thus far, there have been only 31 reported cases in jaw bones and paranasal sinuses. Among them, the mandible is a more common site than the maxilla or paranasal sinuses. Here, we report a case of haemophilic pseudotumour in two parts of the maxilla. Contrast-enhanced CT showed an expansive and thinly corticated lesion with fluid attenuation at the left anterior maxilla which seemed like a post-operative maxillary cyst, ameloblastoma or odontogenic cyst. In addition, the thickened left palatal process of the maxilla seemed like fibrous dysplasia or intraosseous vascular malformation. Since haemophilic pseudotumour is not pathognomonic in radiological findings, when a patient who suffered from haemophilia or had taken anticoagulating agents has jaw lesion, haemophilic pseudotumour should be included in a differential diagnosis.

Objective: To evaluate the potential feasibility of cone beam computed tomography (CBCT) in the assessment of trabecular bone microarchitecture., Study Design: Sixty-eight specimens from four pairs of human jaw were scanned using both micro-computed tomography (micro-CT) of 19.37-μm voxel size and CBCT of 100-μm voxel size. The correlation of 3-dimensional parameters between CBCT and micro-CT was evaluated., Results: All parameters, except bone-specific surface and trabecular thickness, showed linear correlations between the 2 imaging modalities (P < .05). Among the parameters, bone volume, percent bone volume, trabecular separation, and degree of anisotropy (DA) of CBCT images showed strong correlations with those of micro-CT images. DA showed the strongest correlation (r = 0.693)., Conclusions: Most microarchitectural parameters from CBCT were correlated with those from micro-CT. Some microarchitectural parameters, especially DA, could be used as strong predictors of bone quality in the human jaw., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Objective: To determine whether individual measurements or a combination of textural features and mandibular cortical width (MCW) derived from digital dental panoramic radiographs (DPRs) are more useful in assessment of osteoporosis., Study Design: Textural features were obtained by using fractal dimension (FD) and gray-level co-occurrence matrix (GLCM). Digital DPRs and bone mineral densities (BMDs) of the lumbar spine and the femoral neck were obtained from 141 female patients. A naïve Bayes classifier, a k-nearest neighbor (k-NN) algorithm, and a support vector machine were assessed for classifying osteoporosis., Results: The combinations of FD plus MCW (95.3%, 92.1%, 96.8%) and GLCM plus MCW (93.7%, 89.5%, 94.2%) for femoral neck BMD showed the highest diagnostic accuracy with the use of the naïve Bayes, k-NN, and support vector machine classifiers, respectively., Conclusions: The combination of textural features and MCW contributed a better assessment of osteoporosis compared with the use of only individual measurements., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Objective: This study was designed to investigate the relationship between physical factors and the subjective quality of cone beam computed tomography (CBCT) images used for different diagnostic tasks., Study Design: CBCT images of a real skull phantom and a SedentexCT IQ phantom were acquired under different exposure conditions (one Dinnova3 CBCT scanner, 60-110 kV and 4-10 mA). Radiologists evaluated subjective image quality of real skull phantom images for each diagnostic task. On the basis of the evaluation results, the images were classified into two groups: acceptable and unacceptable. The modulation transfer function (MTF), contrast-to-noise ratio (CNR), and image uniformity were measured using the SedentexCT IQ phantom images. The differences in physical factors were evaluated., Results: MTF and CNR values showed statistical differences in image quality in two groups with regard to all diagnostic tasks. In the maxilla, MTF and CNR values showed no significant differences between periapical diagnosis and implant planning in the acceptable groups. Higher MTF and CNR values were required in the periapical diagnosis compared with the implant planning of the mandible., Conclusions: This study proved that MTF and CNR values have a significant association with subjective image quality. The diagnostic task should be considered in evaluation of CBCT image quality., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Accurate simulation and evaluation of mandibular movement is fundamental for the analysis of functional changes and effects of the mandible and maxilla before and after surgical treatments. We applied principal axes of inertia to the three-dimensional (3D) trajectories generated by patient-specific simulations of TMJ movements for the functional evaluations of mandible movement. Three-dimensional movements of the mandible and the maxilla were tracked based on a patient-specific splint and an optical tracking system. The dental occlusion recorded on the sprint provided synchronization for initial movement in the tracking and the simulation phases. The translation and rotation recorded during movement tracking was applied sequentially to the mandibular model in relation to a fixed maxilla model. The sequential 3D positions of selected landmarks on the mandible were calculated based on the reference coordinate system. The landmarks selected for analysis were bilateral condyles and pogonion points. The moment of inertia tensor was calculated with respect to the 3D trajectory points. Using the unit vectors along the principal axes derived from the tensor matrix, α, β and γ rotations around z-, y- and x-axes were determined to represent the principal directions as principal rotations respectively. The γ direction showed the higher standard deviation, variation of directions, than other directions at all the landmarks. The mandible movement has larger kinematic redundancy in the γ direction than α and β during mouth opening and closing. Principal directions of inertia would be applied to analyzing the changes in angular motion of trajectories introduced by mandibular shape changes from surgical treatments and also to the analysis of the influence of skeletal deformities on mandibular movement asymmetry., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Objectives: This study aimed to assess the hard and soft tissue changes in osteomyelitis (OM) of the jaws using CT images., Study Design: The CT images of 153 patients (59 males and 94 females) with OM of the jaws were retrospectively reviewed. The relationships between each space involvement, between space and muscle involvements, between cortical bone defect and space involvement, and between cortical bone defect and muscle involvement were evaluated., Results: The cortical bone defect was more common on the buccal side in the maxilla and on the lingual side in the mandible. The most commonly involved muscle was the buccinator muscle in the maxilla and the masseter muscle in the mandible and the most frequently involved space was the buccal space followed by the masticator space., Conclusions: CT is a useful tool in evaluating both hard and soft tissue changes of OM of the jaws., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Estimation of dental implant stability is an important factor for diagnosis of implant treatment. In this study, we have developed a new system for measuring dental implant mobility. Movement of the implant was measured by an inductive sensor and an amplification adaptor was developed to multiply movement of the implant. Impulse response signal of the implant was acquired and power spectrum analysis was applied for the signal. Various implant-tissue interfacial conditions were simulated in an in vitro experiment and average peak frequency of the power spectrum was calculated for each condition. Artificial implantation model of acryl was fabricated and holes of different levels of depth and diameter were drilled. Two types of impression materials were used to fix the dental implant into the hole. The peak frequency showed linear relationship (P-value<0.01) with the depth and the diameter of the hole. Differentiability of the system was evaluated by ANOVA test.