Search

The anaerobic fungus Piromyces sp. strain E2 metabolizes xylose via xylose isomerase and d-xylulokinase as was shown by enzymatic and molecular analyses. This resembles the situation in bacteria. The clones encoding the two enzymes were obtained from a cDNA library. The xylose isomerase gene sequence is the first gene of this type reported for a fungus. Northern blot analysis revealed a correlation between mRNA and enzyme activity levels on different growth substrates. Furthermore, the molecular mass calculated from the gene sequence was confirmed by gel permeation chromatography of crude extracts followed by activity measurements. Deduced amino acid sequences of both genes were used for phylogenetic analysis. The xylose isomerases can be divided into two distinct clusters. The Piromyces sp. strain E2 enzyme falls into the cluster comprising plant enzymes and enzymes from bacteria with a low G+C content in their DNA. The d-xylulokinase of Piromyces sp. strain E2 clusters with the bacterial d-xylulokinases. The xylose isomerase gene was expressed in the yeast Saccharomyces cerevisiae, resulting in a low activity (25+/-13 nmol min(-1)mg protein(-1)). These two fungal genes may be applicable to metabolic engineering of Saccharomyces cerevisiae for the alcoholic fermentation of hemicellulosic materials.

The nucleation event in protein crystallization is a part of the process that is poorly controlled. It is generally accepted that the protein should be in the metastable phase for crystal growth, but for nucleation higher levels of saturation are needed. Formation of nuclei in bulk solvent requires interaction of protein molecules until a critical size of aggregate is created. In many crystallization experiments sufficiently high levels of saturation are not reached to allow this critical nucleation event to occur. If an environment can be created that favours a higher local concentration of macromolecules, the energy barrier for nucleation may be lowered. When seeds are introduced at lower levels of saturation in a crystallization experiment, nucleation may be facilitated and crystal growth initiated. In this study, the use of natural materials as stable seeds for nucleation has been investigated. The method makes it possible to introduce seeds into crystallization trials at any stage of the experiment using both microbatch and vapour-diffusion methods.

Recent years have witnessed significant advancements in X-ray data-acquisition techniques and phasing algorithms, which have made possible the successful use of a very small anomalous diffraction signal for the solution of crystal structures of macromolecules. Two crystal structures, a 44 kDa glucose isomerase containing nine sulfurs and a 33 kDa xylanase containing five sulfurs, have been solved from single-wavelength anomalous data using widely available methods and programs. These two enzymes contain less sulfur than most proteins in the bacterial or eukaryotic proteomes, providing a Bijvoet ratio of about 0.6%. For glucose isomerase the automatically interpretable electron-density maps could be obtained at high as well as low resolution. The S-SAD approach relies on the anomalous signal of sulfur naturally occurring in proteins and alleviates all need for sample derivatization. It may therefore be applicable to all protein crystals able to provide accurate diffraction data.

A gene (thaI) corresponding to L-arabinose isomerase from Thermus strain IM6501 was cloned by PCR. It comprised 1488 nucleotides and encoded a polypeptide of 496 residues with a predicted molecular weight of 56019 Da. The deduced amino acid sequence had 96.8% identity with the L-arabinose isomerase of Geobacillus stearothermophilus. Recombinant ThaI with N-terminal hexa-tistidine tags was over-expressed in Escherichia coli and purified by affinity chromatography using Ni-NTA resin. The purified ThaI was thermostable with maximal activity at 60 degrees C at pH 8 for 30 min of reaction. Zn2+ and Ni2+ inactivated the catalytic activity of ThaI, 5 mM Mn2+ enhanced the bioconversion yield by 90%. The bioconversion yield of 54% from D-galactose to D-tagatose was obtained by recombinant ThaI at 60 degrees C over 3 d.

2-C-Methyl-d-erythritol 4-phosphate synthase (IspC) is the first enzyme committed to isoprenoid biosynthesis in the methylerythritol phosphate pathway, which represents an alternative route to the classical mevalonate pathway. As it is present in many pathogens and plants, but not in man, this pathway has attracted considerable interest as a target for novel antibiotics and herbicides. Fosmidomycin represents a specific high-affinity inhibitor of IspC. Very recently, its anti-malaria activity in man has been demonstrated in clinical trials. Here, we present the crystal structure of Escherichia coli IspC in complex with manganese and fosmidomycin at 2.5 A resolution. The (N-formyl-N-hydroxy)amino group provides two oxygen ligands to manganese that is present in a distorted octahedral coordination, whereas the phosphonate group is anchored in a specific pocket by numerous hydrogen bonds. Both sites are connected by a spacer of three methylene groups. The substrate molecule, 1-d-deoxyxylulose 5-phosphate, can be superimposed onto fosmidomycin, explaining the stereochemical course of the reaction.

The study of the xylose/glucose isomerase-containing Arthrobacter sp. B-5 cells immobilized in cobalt hydroxide gel showed that immobilization increases the substrate affinity of the enzyme, its thermo- and pH-optima of action and stability, and makes unnecessary the addition of stabilizing cobalt ions to the isomerization medium.

Glucose isomerase from Streptomyces rubiginosus was crystallized in two forms: I222, with one molecule of 44 kDa in the asymmetric unit, and P2(1)2(1)2, with two unique molecules. The I222 structure is known, but the P2(1)2(1)2 form has not been solved before. X-ray diffraction data for the P2(1)2(1)2 form were collected at a wavelength of 1.54 A and data for the I222 form were collected at three different wavelengths: 1.34, 1.07 and 0.98 A. The amount of anomalous signal from one Mn and eight S atoms in these data sets varies from 1.24% to as low as 0.56%. The dual-space direct-methods program SHELXD, run against the Bijvoet differences, gave a clear solution of all anomalous scatterers for all data sets. The Mn positions only were used for SAD phasing of all four data sets. The electron-density map after density modification, resulting from the phasing of a single-wavelength data set and based purely on the anomalous deltaf" contribution, was clearly interpretable; an almost complete model of the protein was built by wARP without human intervention in all four cases. As far as is known, this is the first time that an anomalous signal as low as 0.6% has successfully been used to determine the structure of a macromolecule.

The enzyme, glucosamine-6-phosphate isomerase (GNPI) or deaminase (GNPDA) (EC 5.3.1.10), catalyzes the conversion of GNP to fructose-6-phosphate and ammonia, with an aldo/keto isomerization and an amination/deamination. A hamster sperm-derived protein (Oscillin) with high similarity to bacterial GNPI has been proved to be capable of inducing calcium oscillation in eggs at fertilization. GNPI/Oscillin was supposed to be an important factor in starting embryonic development. From the cDNA library of human dendritic cells (DC), we isolated a novel full-length cDNA encoding a 276-amino acid-residue protein that shares high homology with human GNPI/Oscillin. So, the novel molecule is named as GNPI2. The GNPI2 gene consists of seven exons and six introns. It is mapped to chromosome 4. Northern blot analysis indicated that the tissue distribution of GNPI2 mRNA is different from that of human GNPI or Oscillin mRNA. GNPI2 is ubiquitously expressed in most of human tissues with high expression in testis, ovary, placenta, and heart. Like GNPI, the recombinant GNPI2 has been proved to have the enzymatic activity to catalyze the conversion of GNP to fructose-6-phosphate. Our results indicated that GNPI2 is a novel protein with definite function as a GNPI., (Copyright 2003 Wiley-Liss, Inc.)

To develop a feasible enzymatic process for d-tagatose production, a thermostable l-arabinose isomerase, Gali152, was immobilized in alginate, and the galactose isomerization reaction conditions were optimized. The pH and temperature for the maximal galactose isomerization reaction were pH 8.0 and 65 degrees C in the immobilized enzyme system and pH 7.5 and 60 degrees C in the free enzyme system. The presence of manganese ion enhanced galactose isomerization to tagatose in both the free and immobilized enzyme systems. The immobilized enzyme was more stable than the free enzyme at the same pH and temperature. Under stable conditions of pH 8.0 and 60 degrees C, the immobilized enzyme produced 58 g/L of tagatose from 100 g/L galactose in 90 h by batch reaction, whereas the free enzyme produced 37 g/L tagatose due to its lower stability. A packed-bed bioreactor with immobilized Gali152 in alginate beads produced 50 g/L tagatose from 100 g/L galactose in 168 h, with a productivity of 13.3 (g of tagatose)/(L-reactor.h) in continuous mode. The bioreactor produced 230 g/L tagatose from 500 g/L galactose in continuous recycling mode, with a productivity of 9.6 g/(L.h) and a conversion yield of 46%.

Ribose-5-phosphate isomerase A (RpiA; EC 5.3.1.6) interconverts ribose-5-phosphate and ribulose-5-phosphate. This enzyme plays essential roles in carbohydrate anabolism and catabolism; it is ubiquitous and highly conserved. The structure of RpiA from Escherichia coli was solved by multiwavelength anomalous diffraction (MAD) phasing, and refined to 1.5 A resolution (R factor 22.4%, R(free) 23.7%). RpiA exhibits an alpha/beta/(alpha/beta)/beta/alpha fold, some portions of which are similar to proteins of the alcohol dehydrogenase family. The two subunits of the dimer in the asymmetric unit have different conformations, representing the opening/closing of a cleft. Active site residues were identified in the cleft using sequence conservation, as well as the structure of a complex with the inhibitor arabinose-5-phosphate at 1.25 A resolution. A mechanism for acid-base catalysis is proposed.

The conversion of glucose to fructose at elevated temperatures, as catalyzed by soluble and immobilized xylose (glucose) isomerases from the hyperthermophiles Thermotoga maritima (TMGI) and Thermotoga neapolitana 5068 (TNGI) and from the mesophile Streptomyces murinus (SMGI), was examined. At pH 7.0 in the presence of Mg(2+), the temperature optima for the three soluble enzymes were 85 degrees C (SMGI), 95 degrees to 100 degrees C (TNGI), and >100 degrees C (TMGI). Under certain conditions, soluble forms of the three enzymes exhibited an unusual, multiphasic inactivation behavior in which the decay rate slowed considerably after an initial rapid decline. However, the inactivation of the enzymes covalently immobilized to glass beads, monophasic in most cases, was characterized by a first-order decay rate intermediate between those of the initial rapid and slower phases for the soluble enzymes. Enzyme productivities for the three immobilized GIs were determined experimentally in the presence of Mg(2+). The highest productivities measured were 750 and 760 kg fructose per kilogram SMGI at 60 degrees C and 70 degrees C, respectively. The highest productivity for both TMGI and TNGI in the presence of Mg(2+) occurred at 70 degrees C, pH 7.0, with approximately 230 and 200 kg fructose per kilogram enzyme for TNGI and TMGI, respectively. At 80 degrees C and in the presence of Mg(2+), productivities for the three enzymes ranged from 31 to 273. A simple mathematical model, which accounted for thermal effects on kinetics, glucose-fructose equilibrium, and enzyme inactivation, was used to examine the potential for high-fructose corn syrup (HFCS) production at 80 degrees C and above using TNGI and SMGI under optimal conditions, which included the presence of both Co(2+) and Mg(2+). In the presence of both cations, these enzymes showed the potential to catalyze glucose-to-fructose conversion at 80 degrees C with estimated lifetime productivities on the order of 2000 kg fructose per kilogram enzyme, a value competitive with enzymes currently used at 55 degrees to 65 degrees C, but with the additional advantage of higher fructose concentrations. At 90 degrees C, the estimated productivity for SMGI dropped to 200, whereas, for TNGI, lifetime productivities on the order of 1000 were estimated. Assuming that the most favorable biocatalytic and thermostability features of these enzymes can be captured in immobilized form and the chemical lability of substrates and products can be minimized, HFCS production at high temperatures could be used to achieve higher fructose concentrations as well as create alternative processing strategies., (Copyright 2002 Wiley Periodicals, Inc.)

The hps and phi genes encoding 3-hexulose-6-phosphate synthase and 6-phospho-3-hexuloisomerase, the key enzymes of the ribulose monophosphate (RuMP) pathway for formaldehyde fixation, were cloned from the chromosomal DNA of a thermotolerant methylotroph, Bacillus brevis S1. Enzyme induction and Northern blot analyses revealed that both the hps and phi genes are induced by methanol or ethanol, and that their expression is controlled polycistronically at the transcription stage. Sequence analysis also suggested that the hps and phi genes constitute an RuMP operon. The gene organization of the RuMP operon and its surrounding region are unique among bacteria possessing the RuMP pathway genes.

The eightfold (betaalpha) barrel structure, first observed in triose-phosphate isomerase, occurs ubiquitously in nature. It is nearly always an enzyme and most often involved in molecular or energy metabolism within the cell. In this review we bring together data on the sequence, structure and function of the proteins known to adopt this fold. We highlight the sequence and functional diversity in the 21 homologous superfamilies, which include 76 different sequence families. In many structures, the barrels are "mixed and matched" with other domains generating additional variety. Global and local structure-based alignments are used to explore the distribution of the associated functional residues on this common structural scaffold. Many of the substrates/co-factors include a phosphate moiety, which is usually but not always bound towards the C-terminal end of the sequence. Some, but not all, of these structures, exhibit a structurally conserved "phosphate binding motif". In contrast metal-ligating residues and catalytic residues are distributed along the sequence. However, we also found striking structural superposition of some of these residues. Lastly we consider the possible evolutionary relationships between these proteins, whose sequences are so diverse that even the most powerful approaches find few relationships, yet whose active sites all cluster at one end of the barrel. This extreme example of the "one fold-many functions" paradigm illustrates the difficulty of assigning function through a structural genomics approach for some folds.

We have identified and defined the function of kpsF of Neisseria meningitidis and the homologues of kpsF in encapsulated K1 and K5 Escherichia coli. KpsF was shown to be the arabinose-5-phosphate isomerase, an enzyme not previously identified in prokaryotes, that mediates the interconversion of ribulose 5-phosphate and arabinose 5-phosphate. KpsF is required for 3-deoxy-d-manno-octulosonic acid (Kdo) biosynthesis in N. meningitidis. Mutation of kpsF or the gene encoding the CMP-Kdo synthetase (kpsU/kdsB) in N. meningitidis resulted in expression of a lipooligosaccharide (LOS) structure that contained only lipid A and reduced capsule expression in the five invasive disease-associated meningococcal serogroups (A, B, C, Y, and W-135). The step linking meningococcal capsule and LOS biosynthesis was shown to be Kdo production as the expression of capsule was wild type in a Kdo transferase (kdtA) mutant. Thus, in addition to lipooligosaccharide assembly, Kdo is required for meningococcal capsular polysaccharide expression. Furthermore, N. meningitidis, unlike enteric Gram-negative bacteria, can survive and synthesize only unglycosylated lipid A.

pH and temperature play critical roles in multistep enzymatic conversions. In such conversions, the optimal pH for individual steps differs greatly. In this article, we describe the production of glucoamylase (from Aspergillus oryzae MTCC152 in solid-state fermentation) and glucose isomerase (from Streptomyces griseus NCIM2020 in submerged fermentation), used in industries for producing high-fructose syrup. Optimum pH for glucoamylase was found to be 5.0. For glucose isomerase, the optimum pH ranged between 7.0 and 8.5, depending on the type of buffer used. Optimum temperature for glucoamylase and glucose isomerase was 50 and 60 degrees C, respectively. When both the enzymatic conversions were performed simultaneously at a compromised pH of 6.5, both the enzymes showed lowered activity. We also studied the kinetics at different pHs, which allows the two-step reaction to take place simultaneously. This was done by separating two steps by a thin layer of urease. Ammonia generated by the hydrolysis of urea consumed the hydrogen ions, thereby allowing optimal activity of glucose isomerase at an acidic pH of 5.0.

Xylose isomerase exhibits a bridged-bimetallic active-site motif in which the substrate is bound to two metals connected by a glutamate bridge, and X-ray crystallographic studies suggest that metal movement is involved in the hydride transfer rate-controlling catalytic step. Here we report classical/quantal dynamical simulations of this step that provide new insight into the metal motion. The potential energy surface is calculated by treating xylose with semiempirical molecular orbital theory augmented by a simple valence bond potential and the rest of the system by molecular mechanics. The rate constant for the hydride-transfer step was calculated by ensemble-averaged dynamical simulations including both variational transition-state theory for determination of the statistically averaged dynamical bottleneck and optimized multidimensional tunneling calculations. The dynamics calculations include 25 317 atoms, with quantized vibrational free energy in 89 active-site degrees of freedom, and with 32 atoms moving through static secondary zone transition-state configurations in the quantum tunneling simulation. Our simulations show that the average Mg-Mg distance R increases monotonically as a function of the hydride-transfer progress variable z. The range of the average R along the reaction path is consistent with the X-ray structure, thus providing a dynamical demonstration of the postulated role of Mg in catalysis. We also predicted the primary deuterium kinetic isotope effect (KIE) for the chemical step. We calculated a KIE of 3.8 for xylose at 298 K, which is consistent with somewhat smaller experimentally observed KIEs for glucose substrate at higher temperatures. More than half of our KIE is due to tunneling; neglecting quantum effects on the reaction coordinate reduces the calculated KIE to 1.8.

We present a systematic computational framework, eCodonOpt, for designing parental DNA sequences for directed evolution experiments through codon usage optimization. Given a set of homologous parental proteins to be recombined at the DNA level, the optimal DNA sequences encoding these proteins are sought for a given diversity objective. We find that the free energy of annealing between the recombining DNA sequences is a much better descriptor of the extent of crossover formation than sequence identity. Three different diversity targets are investigated for the DNA shuffling protocol to showcase the utility of the eCodonOpt framework: (i) maximizing the average number of crossovers per recombined sequence; (ii) minimizing bias in family DNA shuffling so that each of the parental sequence pair contributes a similar number of crossovers to the library; and (iii) maximizing the relative frequency of crossovers in specific structural regions. Each one of these design challenges is formulated as a constrained optimization problem that utilizes 0-1 binary variables as on/off switches to model the selection of different codon choices for each residue position. Computational results suggest that many-fold improvements in the crossover frequency, location and specificity are possible, providing valuable insights for the engineering of directed evolution protocols.

A gene homologous to D-ribose-5-phosphate isomerase (EC 5.3.1.6) was found in the genome of Pyrococcus horikoshii. D-ribose-5-phosphate isomerase (PRI) is of particular metabolic importance since it catalyzes the interconversion between the ribose and ribulose forms involved in the pentose phosphate cycle and in the process of photosynthesis. The gene consisting of 687 bp was overexpressed in Escherichia coli, and the resulting enzyme showed activity at high temperatures with an optimum over 90 degrees C. The crystal structures of the enzyme, free and in complex with D-4-phosphoerythronic acid inhibitor, were determined. PRI is a tetramer in the crystal and in solution, and each monomer has a new fold consisting of two alpha/beta domains. The 3D structures and the characterization of different mutants indicate a direct or indirect catalytic role for the residues E107, D85, and K98.

The active site of glucosamine-6-phosphate deaminase from Escherichia coli (GlcN6P deaminase, EC 3.5.99.6) has a complex lid formed by two antiparallel beta-strands connected by a helix-loop segment (158-187). This motif contains Arg172, which is a residue involved in binding the substrate in the active-site, and three residues that are part of the allosteric site, Arg158, Lys160 and Thr161. This dual binding role of the motif forming the lid suggests that it plays a key role in the functional coupling between active and allosteric sites. Previous crystallographic work showed that the temperature coefficients of the active-site lid are very large when the enzyme is in its T allosteric state. These coefficients decrease in the R state, thus suggesting that this motif changes its conformational flexibility as a consequence of the allosteric transition. In order to explore the possible connection between the conformational flexibility of the lid and the function of the deaminase, we constructed the site-directed mutant Phe174-Ala. Phe174 is located at the C-end of the lid helix and its side-chain establishes hydrophobic interactions with the remainder of the enzyme. The crystallographic structure of the T state of Phe174-Ala deaminase, determined at 2.02 A resolution, shows no density for the segment 162-181, which is part of the active-site lid (PDB 1JT9). This mutant form of the enzyme is essentially inactive in the absence of the allosteric activator, N-acetylglucosamine-6-P although it recovers its activity up to the wild-type level in the presence of this ligand. Spectrometric and binding studies show that inactivity is due to the inability of the active-site to bind ligands when the allosteric site is empty. These data indicate that the conformational flexibility of the active-site lid critically alters the binding properties of the active site, and that the occupation of the allosteric site restores the lid conformational flexibility to a functional state.

The key enzyme in the nonmevalonate pathway, 1-deoxy-D-xylulose 5-phosphate reductoisomerase (DXR), has been shown to be an effective target of antimalarial drugs. Here we report the crystal structure of DXR complexed with NADPH and a sulfate ion from Escherichia coli at 2.2 A resolution. The structure showed the presence of an extra domain, which is absent from other NADPH-dependent oxidoreductases, in addition to the conformation of catalytic residues and the substrate binding site. A flexible loop covering the substrate binding site plays an important role in the enzymatic reaction and the determination of substrate specificity.

Examples of phasing macromolecular crystal structures based on single-wavelength anomalous dispersion (SAD) show that this approach is more powerful and may have more general application in structural biology than was anticipated. Better data-collection facilities and cryogenic techniques, coupled with powerful programs for data processing, phasing, density modification and automatic model building, means that the SAD approach may gain wide popularity owing to its simplicity, less stringent wavelength requirements and faster data collection and phasing than the multi-wavelength (MAD) approach. It can be performed at any wavelength where anomalous scattering can be observed, in many cases using laboratory X-ray sources.

We have solved the 2.5-A crystal structure of 1-deoxy-D-xylulose-5-phosphate reductoisomerase, an enzyme involved in the mevalonate-independent 2-C-methyl-D-erythritol-4-phosphate pathway of isoprenoid biosynthesis. The structure reveals that the enzyme is present as a homodimer. Each monomer displays a V-like shape and is composed of an amino-terminal dinucleotide binding domain, a connective domain, and a carboxyl-terminal four-helix bundle domain. The connective domain is responsible for dimerization and harbors most of the active site. The strictly conserved acidic residues Asp(150), Glu(152), Glu(231), and Glu(234) are clustered at the putative active site and are probably involved in the binding of divalent cations mandatory for enzyme activity. The connective and four-helix bundle domains show significant mobility upon superposition of the dinucleotide binding domains of the three conformational states present in the asymmetric unit of the crystal. A still more pronounced flexibility is observed for a loop spanning residues 186 to 216, which adopts two completely different conformations within the three protein conformers. A possible involvement of this loop in an induced fit during substrate binding is discussed.

A new crystallographic structure of the free active-site R conformer of the allosteric enzyme glucosamine-6-phosphate deaminase from Escherichia coli, coupled with previously reported structures of the T and R conformers, generates a detailed description of the heterotropic allosteric transition in which structural flexibility plays a central role. The T conformer's external zone [Horjales et al. (1999), Structure, 7, 527-536] presents higher B values than in the R conformers. The ligand-free enzyme (T conformer) undergoes an allosteric transition to the free active-site R conformer upon binding of the allosteric activator. This structure shows three alternate conformations of the mobile section of the active-site lid (residues 163-182), in comparison to the high B values for the unique conformation of the T conformer. One of these alternate R conformations corresponds to the active-site lid found when the substrate is bound. The disorder associated with the three alternate conformations can be related to the biological regulation of the K(m) of the enzyme for the reaction, which is metabolically required to maintain adequate concentrations of the activator, which holds the enzyme in its R state. Seven alternate conformations for the active-site lid and three for the C-terminus were refined for the T structure using isotropic B factors. Some of these conformers approach that of the R conformer in geometry. Furthermore, the direction of the atomic vibrations obtained with anisotropic B refinement supports the hypothesis of an oscillating rather than a tense T state. The concerted character of the allosteric transition is also analysed in view of the apparent dynamics of the conformers.

Random PCR mutagenesis was applied to the Thermus thermophilus xylA gene encoding xylose isomerase. Three cold-adapted mutants were isolated with the following amino-acid substitutions: E372G, V379A (M-1021), E372G, F163L (M-1024) and E372G (M-1026). The wild-type and mutated xylA genes were cloned and expressed in Escherichia coli HB101 using the vector pGEM-T Easy, and their physicochemical and catalytic properties were determined. The optimum pH for xylose isomerization activity for the mutants was approximately 7.0, which is similar to the wild-type enzyme. Compared with the wild-type, the mutants were active over a broader pH range. The mutants exhibited up to nine times higher catalytic rate constants (k(cat)) for d-xylose compared with the wild-type enzyme at 60 degrees C, but they did not show any increase in catalytic efficiency (k(cat)/K(m)). For d-glucose, both the k(cat) and the k(cat)/K(m) values for the mutants were increased compared with the wild-type enzyme. Furthermore, the mutant enzymes exhibited up to 255 times higher inhibition constants (K(i)) for xylitol than the wild-type, indicating that they are less inhibited by xylitol. The thermal stability of the mutated enzymes was poorer than that of the wild-type enzyme. The results are discussed in terms of increased molecular flexibility of the mutant enzymes at low temperatures.

Comparative analysis of genome sequence data from mesophilic and hyperthermophilic micro-organisms has revealed a strong bias against specific thermolabile amino-acid residues (i.e. N and Q) in hyperthermophilic proteins. The N + Q content of class II xylose isomerases (XIs) from mesophiles, moderate thermophiles, and hyperthermophiles was examined. It was found to correlate inversely with the growth temperature of the source organism in all cases examined, except for the previously uncharacterized XI from Bacillus licheniformis DSM13 (BLXI), which had an N + Q content comparable to that of homologs from much more thermophilic sources. To determine whether BLXI behaves as a thermostable enzyme, it was expressed in Escherichia coli, and the thermostability and activity properties of the recombinant enzyme were studied. Indeed, it was optimally active at 70-72 degrees C, which is significantly higher than the optimal growth temperature (37 degrees C) of B. licheniformis. The kinetic properties of BLXI, determined at 60 degrees C with glucose and xylose as substrates, were comparable to those of other class II XIs. The stability of BLXI was dependent on the metallic cation present in its two metal-binding sites. The enzyme thermostability increased in the order apoenzyme < Mg2+-enzyme < Co2+-enzyme approximately Mn2+-enzyme, with melting temperatures of 50.3 degrees C, 53.3 degrees C, 73.4 degrees C, and 73.6 degrees C. BLXI inactivation was first-order in all conditions examined. The energy of activation for irreversible inactivation was also strongly influenced by the metal present, ranging from 342 kJ x mol(-1) (apoenzyme) to 604 kJ x mol(-1) (Mg2+-enzyme) to 1166 kJ x mol(-1) (Co2+-enzyme). These results suggest that the first irreversible event in BLXI unfolding is the release of one or both of its metals from the active site. Although N + Q content was an indicator of thermostability for class II XIs, this pattern may not hold for other sets of homologous enzymes. In fact, the extremely thermostable alpha-amylase from B. licheniformis was found to have an average N + Q content compared with homologous enzymes from a variety of mesophilic and thermophilic sources. Thus, it would appear that protein thermostability is a function of more complex molecular determinants than amino-acid content alone.

This paper describes the recombinant expression of the ispC gene of Escherichia coli specifying 2C-methyl-D-erythritol 4-phosphate synthase in a modified form that can be purified efficiently by metal-chelating chromatography. The enzyme was used for the preparation of isotope-labeled 2C-methyl-D-erythritol 4-phosphate employing isotope-labeled glucose and pyruvate as starting materials. The simple one-pot methods described afford numerous isotopomers of 2C-methyl-D-erythritol 4-phosphate carrying (3)H, (13)C, or (14)C from commercially available precursors. The overall yield based on the respective isotope-labeled starting material is approximately 50%.

Xylose isomerases from Thermotoga neapolitana (TNXI) and Thermoanaerobacterium thermosulfurigenes (TTXI) share 70.4% sequence identity and are thermostable. The double mutants Trp138Phe/Val185Thr of TNXI and TTXI have higher catalytic efficiencies than TNXI and TTXI, respectively. The Trp138Phe/Val185Thr TNXI and TTXI mutants were overexpressed in Escherichia coli strain BL21(DE3) and purified. Crystals of the two proteins were grown with polyethylene glycol 8000 as the major precipitant by the hanging-drop vapour-diffusion method. Crystals of the TNXI mutant were obtained in the absence of substrate, in complex with glucose and in complex with fructose. Crystals of the TTXI mutant were obtained complexed with glucose. Diffraction data were collected at 1.9, 2.1 and 2.1 A resolution for the fructose-TNXI mutant, glucose-TNXI mutant and substrate-unbound TNXI mutant, respectively. The diffraction data for the glucose-TTXI mutant were collected at 2.0 A resolution. The crystals belong to the orthorhombic space groups C222(1) (TNXI mutant) and P2(1)2(1)2(1) (TTXI mutant). The TNXI and TTXI mutant crystals contain two and four monomers in the asymmetric unit, respectively.

The gene encoding a novel L-ribose isomerase (L-RI) from Acinetobacter sp. was cloned into Escherichia coli and nucleotide sequence was determined. The gene corresponded to an open reading frame of 747 bp that codes for a deduced protein of 249 amino acids, which showed no amino acid sequence similarity with any other sugar isomerases. After expression of the gene in E. coli using pUC118 the recombinant L-RI was purified to homogeneity using different chromatographic methods. The overall enzymatic properties of the purified recombinant L-RI were the same as those of the authentic L-RI. To our knowledge, this is the first time report concerning the L-RI gene.

Glucosamine-6P-deaminase (EC 3.5.99.6, formerly glucosamine-6-phosphate isomerase, EC 5.3.1.10) from Escherichia coli is an attractive experimental model for the study of allosteric transitions because it is both kinetically and structurally well-known, and follows rapid equilibrium random kinetics, so that the kinetic K(m) values are true thermodynamic equilibrium constants. The enzyme is a typical allosteric K-system activated by N-acetylglucosamine 6-P and displays an allosteric behavior that can be well described by the Monod-Wyman-Changeux model. This thermodynamic study based on the temperature dependence of allosteric parameters derived from this model shows that substrate binding and allosteric transition are both entropy-driven processes in E. coli GlcN6P deaminase. The analysis of this result in the light of the crystallographic structure of the enzyme implicates the active-site lid as the structural motif that could contribute significantly to this entropic component of the allosteric transition because of the remarkable change in its crystallographic B factors., (Copyright 2001 Academic Press.)

Glucose kinase catalyzes the ATP-dependent phosphorylation of glucose. Streptomyces peucetius var. caesius glucose kinase was purified 292-fold to homogeneity. The enzyme has cytosolic localization and is composed of four identical subunits, each of 31 kDa. The purified enzyme easily dissociates into dimers. However, in the presence of 100 mM glucose the enzyme maintains its tetrameric form. Maximum activity was found at 42 degrees C and pH 7.5. Isoelectric focusing of the enzyme showed a pl of 8.4. The N- and C-terminal amino acid sequences were MGLTIGVD and VYFAREPDPIM, respectively. The kinetic mechanism of S. peucetius var. caesius glucose kinase appears to be a rapid equilibrium ordered type, i.e., ordered addition of substrates to the enzyme, where the first substrate is d-glucose. The K(m) values for d-glucose and MgATP(2-) were 1.6 +/- 0.2 and 0.8 +/- 0.1 mM, respectively. Mg(2+) in excess of 10 mM inhibits enzyme activity., (Copyright 2001 Academic Press.)

Xylose isomerase produced by Bacillus thermoantarcticus was purified 73-fold to homogeneity and its biochemical properties were determined. It was a homotetramer with a native molecular mass of 200 kDa and a subunit molecular mass of 47 kDa, with an isoelectric point at 4.8. The enzyme had a K(m) of 33 mM for xylose and also accepted D-glucose as substrate. Arrhenius plots of the enzyme activity of xylose isomerase were linear up to a temperature of 85 degrees C. Its optimum pH was around 7.0, and it had 80% of its maximum activity at pH 6.0. This enzyme required divalent cations for its activity and thermal stability. Mn(2+), Co(2+) or Mg(2+) were of comparable efficiency for xylose isomerase reaction, while Mg(2+) was necessary for glucose isomerase reaction.

The active site of glucosamine-6-phosphate deaminase (EC 3.5.99.6, formerly 5.3.1.10) from Escherichia coli was first characterized on the basis of the crystallographic structure of the enzyme bound to the competitive inhibitor 2-amino-2-deoxy-glucitol 6-phosphate. The structure corresponds to the R allosteric state of the enzyme; it shows the side-chain of His143 in close proximity to the O5 atom of the inhibitor. This arrangement suggests that His143 could have a role in the catalysis of the ring-opening step of glucosamine 6-phosphate whose alpha-anomer is the true substrate. The imidazole group of this active-site histidine contacts the carboxy groups from Glu148 and Asp141, via its Ndelta1 atom [Oliva et al. (1995) Structure 3, 1323-1332]. These interactions change in the T state because the side chain of Glu148 moves toward the allosteric site, leaving at the active site the dyad Asp141-His143 [Horjales et al. (1999) Structure 7, 527-536]. In this research, a dual approach using site-directed mutagenesis and controlled chemical modification of histidine residues has been used to investigate the role of the active-site histidine. Our results support a multifunctional role of His143; in the forward reaction, it is involved in the catalysis of the ring-opening step of the substrate, glucosamine 6-P. In the reverse reaction, the substrate fructose 6-P binds in its open chain, carbonylic form. The role of His143 in the binding of both glucosamine 6-P and reaction intermediates in their extended-chain forms was demonstrated by binding experiments using the reaction intermediate analogue, 2-amino-2-deoxy-D-glucitol 6-phosphate. His143 was also shown to be a critical residue for the conformational coupling between active and allosteric sites. From the pH dependence of the reactivity of the active site histidine to diethyl dicarbonate, we observed a pK(a) change of 1.2 units to the acid side when the enzyme undergoes the allosteric T to R transition during which the side chain of Glu148 moves toward the active site. The kinetic study of the Glu148-Gln mutant deaminase shows that the loss of the carboxy group and its replacement with the corresponding amide modifies the k(cat) versus pH profile of the enzyme, suggesting that the catalytic step requiring the participation of His143 has become rate-limiting. This, in turn, indicates that the interaction Glu148-His143 in the wild-type enzyme in the R state contributes to make the enzyme functional over a wide pH range.

The recently discovered 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway for the biosynthesis of plastid isoprenoids (including carotenoids) is not fully elucidated yet despite its central importance for plant life. It is known, however, that the first reaction completely specific to the pathway is the conversion of 1-deoxy-D-xylulose 5-phosphate (DXP) into MEP by the enzyme DXP reductoisomerase (DXR). We have identified a tomato cDNA encoding a protein with homology to DXR and in vivo activity, and show that the levels of the corresponding DXR mRNA and encoded protein in fruit tissues are similar before and during the massive accumulation of carotenoids characteristic of fruit ripening. The results are consistent with a non-limiting role of DXR, and support previous work proposing DXP synthase (DXS) as the first regulatory enzyme for plastid isoprenoid biosynthesis in tomato fruit. Inhibition of DXR activity by fosmidomycin showed that plastid isoprenoid biosynthesis is required for tomato fruit carotenogenesis but not for other ripening processes. In addition, dormancy was reduced in seeds from fosmidomycin-treated fruit but not in seeds from the tomato yellow ripe mutant (defective in phytoene synthase-1, PSY1), suggesting that the isoform PSY2 might channel the production of carotenoids for abscisic acid biosynthesis. Furthermore, the complete arrest of tomato seedling development using fosmidomycin confirms a key role of the MEP pathway in plant development.

The enzyme 6-phospho-3-hexulose isomerase (YckF) from Bacillus subtilis has been prepared and crystallized in a form suitable for X-ray crystallographic analysis. Crystals were grown by the hanging-drop method at 291 K using polyethylene glycol 2000 monomethylether as precipitant. They diffract beyond 1.7 A using an in-house Cu Kalpha source and belong to either space group P6(5)22 or P6(1)22, with unit-cell parameters a = b = 72.4, c = 241.2 A, and have two molecules of YckF in the asymmetric unit.

Reactions of MCl(2).nH(2)O with N,N'-bis(D-glucopyranosyl)-1,4,7-triazacyclononane ((D-Glc)(2)-tacn), which was formed from D-glucose and 1,4,7-triazacyclononane (tacn) in situ, afforded a series of mononuclear divalent metal complexes with two beta-D-glucopyranosyl moieties, [M((D-Glc)(2)-tacn)Cl]Cl (M = Zn (11), Cu (12), Ni (13), Co (14)). Complexes 11-14 were characterized by analytical and spectroscopic measurements and X-ray crystallography and were found to have a distorted octahedral M(II) center ligated by the pentacoordinate N-glycoside ligand, (beta-D-glucopyranosyl)(2)-tacn, and a chloride anion. Each D-glucose moiety is tethered to the metal center through the beta-N-glycosidic bond with tacn and additionally coordinated via the C-2 hydroxyl group, resulting in a lambda-gauche five-membered chelate ring. When L-rhamnose (6-deoxy-L-mannose) was used instead of D-glucose, the nickel(II) complex with two beta-L-rhamnopyranosyl moieties, [Ni((D-Man)(2)-tacn)(MeOH)]Cl(2) (15), was obtained and characterized by an X-ray analysis. Reactions of 11 (M = Zn) with [Zn(XDK)(H(2)O)] (21) or [Cu(XDK)(py)(2)] (22) (H(2)XDK = m-xylylenediamine bis(Kemp's triacid imide)) yielded homo and heterotrimetallic complexes formulated as [Zn(2)M'((D-Glc)(2)-tacn)(2)(XDK)]Cl(2) (M' = Zn (31), Cu (32)). The similar reactions of 12 (M = Cu) with complex 21 or 22 afforded [Cu(2)M'((D-Glc)(2)-tacn)(2)(XDK)]Cl(2) (M' = Cu (33), Zn (34)). An X-ray crystallographic study revealed that complexes 31 and 34 have either Zn(II)(3) or Cu(II)Zn(II)Cu(II) trimetallic centers bridged by two carboxylate groups of XDK and two D-glucopyranosyl residues. The M...M' separations are 3.418(3)-3.462(3) A (31) and 3.414(1)-3.460(1) A (34), and the M...M'...M angles are 155.18(8) degrees (31) and 161.56(6) degrees (34). The terminal metal ions are octahedrally coordinated by the (D-Glc)(2)-tacn ligand through three nitrogen atoms of tacn, two oxygen atoms of the C-2 hydroxyl groups of the carbohydrates, and a carboxylate oxygen atom of XDK ligand. The central metal ions sit in a distorted octahedral environment ligated by four oxygen atoms of the carbohydrate residues in the (D-Glc)(2)-tacn ligands and two carboxylate oxygen atoms of XDK. The deprotonated beta-D-glucopyranosyl unit at the C-2 hydroxyl group bridges the terminal and central ions with the C-2 mu-alkoxo group, with the C-1 N-glycosidic amino and the C-3 hydroxyl groups coordinating to each metal center. Complexes 31-34 are the first examples of metal complexes in which D-glucose units act as bridging ligands. These structures could be very useful substrate binding models of xylose or glucose isomerases, which promote D-glucose D-fructose isomerization by using divalent dimetallic centers bridged by a glutamate residue.

Epimerization of aldoses at C-2 has been extensively investigated by using various metal ions in conjunction with diamines, monoamines, and aminoalcohols. Aldoses are epimerized at C-2 by a combination of alkaline-earth or rare-earth metal ions (Ca(2+), Sr(2+), Pr(3+), or Ce(3+)) and such monoamines as triethylamine. In particular, the Ca(2+)-triethylamine system proved effective in promoting aldose-ketose isomerization as well as C-2 epimerization of aldoses. 13C NMR studies using D-(1-(13)C)glucose and D-(1-(13)C)galactose with the CaCl(2) system in CD(3)OD revealed that the C-2 epimerization proceeds via stereospecific rearrangement of the carbon skeleton, or 1,2-carbon shift, and ketose formation proceeds partially through an intramolecular hydrogen migration or 1,2-hydride shift and, in part, via an enediol intermediate. These simultaneous aldose-aldose and aldose-ketose isomerizations showed interesting substrate-dependent chemoselectivity. Whereas the mannose-type aldoses having 2,3-erythro configuration (D-mannose, D-lyxose, and D-ribose) showed considerable resistance to both the C-2 epimerization and the aldose-ketose isomerization, the glucose-type sugars having 2,3-threo and 3,4-threo configurations, D-glucose and D-xylose, are mainly epimerized at C-2 and those having the 2,3-threo and 3,4-erythro configurations, D-galactose and D-arabinose, were mostly isomerized into 2-ketoses. These features are of potential interest in relevance to biomimic sugar transformations by metal ions.

Glucose isomerase (GI) from Streptomyces olivaceoviridis E-86 is a unique enzyme, very acid-stable with a large potential for corn sweetener industries. The gene encoding this unique enzyme was cloned by a simple two-step PCR method, and expressed in Escherichia coli. A single open reading frame consisting of 1164 base pairs (70.7 mol % of G + C content) that encoded a polypeptide composed of 388 amino acid residues (Mr 42,993) was found. The E. coli transformant carrying the gene overproduced the recombinant GI (rGI) and the enzyme was successfully expressed as a tetramer under the transcriptional control of the tac-promoter. The purified recombinant enzyme was indistinguishable from that of the authentic enzyme e.g. molecular weight, immunological properties, N-terminal amino acid sequences, subunit structures, and temperature and pH profiles. The relationships between structure and properties of the enzymes are also discussed.

Ketosteroid isomerase (KSI) from Comamonas testosteroni is a homodimeric enzyme with 125 amino acids in each monomer catalyzing the allylic isomerization reaction at rates comparable to the diffusion limit. Kinetic analysis of KSI refolding has been carried out to understand its folding mechanism. The refolding process as monitored by fluorescence change revealed that the process consists of three steps with a unimolecular fast, a bimolecular intermediate, and most likely unimolecular slow phases. The fast refolding step might involve the formation of structured monomers with hydrophobic surfaces that seem to have a high binding capacity for the amphipathic dye 8-anilino-1-naphthalenesulfonate. During the refolding process, KSI also generated a state that can bind equilenin, a reaction intermediate analogue, at a very early stage. These observations suggest that the KSI folding might be driven by the formation of the apolar active-site cavity while exposing hydrophobic surfaces. Since the monomeric folding intermediate may contain more than 83% of the native secondary structures as revealed previously, it is nativelike taking on most of the properties of the native protein. Urea-dependence analysis of refolding revealed the existence of folding intermediates for both the intermediate and slow steps. These steps were accelerated by cyclophilin A, a prolyl isomerase, suggesting the involvement of a cis-trans isomerization as a rate-limiting step. Taken together, we suggest that KSI folds into a monomeric intermediate, which has nativelike secondary structure, an apolar active site, and exposed hydrophobic surface, followed by dimerization and prolyl isomerizations to complete the folding.

Crystalline cross-linked xylose isomerase (CLXI, EC 5.3.1.5) and xylanase (CLX, EC 3.2.1.8) were studied in a packed-bed reactor for simultaneous catalytic reaction and separation of substrates from reaction products. Streptomyces rubiginosus xylose isomerase catalyzed a slow isomerization of L-arabinose to L-ribulose and an epimerization to L-ribose. In equilibrium the reaction mixture contained 52.5% arabinose, 22.5% ribulose, and 25% ribose. In a packed-bed column filled with CLXI, a simultaneous reaction and separation resulted in fractions where arabinose concentration varied between 100-0%, ribulose between 0-55%, and ribose between 0-100%. Trichoderma reesei xylanase II hydrolyzed and transferred xylotetraose mainly to xylotriose and xylobiose. In a packed-bed column filled with CLX, xylotetraose rapidly reacted to xylobiose and xylose by a mechanism that is not yet fully understood., (Copyright 2001 John Wiley & Sons, Inc.)

The deuterium enrichment of dihydroxyacetone obtained from the aldose-ketose isomerization of D,L-glyceraldehyde in D(2)O at 25 degrees C was determined by (1)H NMR spectroscopy from the integrated areas of the signals for the alpha-CH(2) and alpha-CHD groups of the product. One mole equivalent of deuterium is incorporated into the product when the isomerization is carried out in 150 mM pyrophosphate buffer at pD 8.4, but only 0.6 mol equiv of deuterium is incorporated into the product of isomerization in the presence of 0.01 M deuterioxide ion, so that 40% of the latter isomerization reaction proceeds by the intramolecular transfer of hydride ion. Several pathways were identified for catalysis of the isomerization of glyceraldehyde to give dihydroxyacetone. The isomerization with hydride transfer is strongly catalyzed by added Zn(2+). Deprotonation of glyceraldehyde is rate-determining for isomerization with proton transfer, and this proton-transfer reaction is catalyzed by Brønsted bases. Proton transfer also occurs by a termolecular pathway with catalysis by the combined action of Brønsted bases and Zn(2+). These results show that there is no large advantage to the spontaneous isomerization of glyceraldehyde in alkaline solution with either proton or hydride transfer, and that effective catalytic pathways exist to stabilize the transition states for both of these reactions in water. The existence of separate enzymes that catalyze the isomerization of sugars with hydride transfer and the isomerization of sugar phosphates with proton transfer is proposed to be a consequence of the lack of any large advantage to reaction by either of these pathways for the corresponding nonenzymatic isomerization in water.

Thermostable glucose isomerases are desirable for production of 55% fructose syrups at >90 degrees C. Current commercial enzymes operate only at 60 degrees C to produce 45% fructose syrups. Protein engineering to construct more stable enzymes has so far been relatively unsuccessful, so this review focuses on elucidation of the thermal inactivation pathway as a future guide. The primary and tertiary structures of 11 Class 1 and 20 Class 2 enzymes are compared. Within each class the structures are almost identical and sequence differences are few. Structural differences between Class 1 and Class 2 are less than previously surmised. The thermostabilities of Class 1 enzymes are essentially identical, in contrast to previous reports, but in Class 2 they vary widely. In each class, thermal inactivation proceeds via the tetrameric apoenzyme, so metal ion affinity dominates thermostability. In Class 1 enzymes, subunit dissociation is not involved, but there is an irreversible conformational change in the apoenzyme leading to a more thermostable inactive tetramer. This may be linked to reversible conformational changes in the apoenzyme at alkaline pH arising from electrostatic repulsions in the active site, which break a buried Arg-30-Asp-299 salt bridge and bring Arg-30 to the surface. There is a different salt bridge in Class 2 enzymes, which might explain their varying thermostability. Previous protein engineering results are reviewed in light of these insights.

Two periwinkle cDNAs (crdxr and crmecs) encoding enzymes of the non-mevalonate terpenoid pathway were characterized using reverse transcription-PCR strategy based on the design of degenerated oligonucleotides. The deduced amino acid sequence of crdxr is homologue to 1-deoxy-D-xylulose 5-phosphate reductoisomerases. Crmecs represents the first plant cDNA encoding a protein similar to the 2C-methyl-D-erythritol 2,4-cyclodiphosphate synthase from Escherichia coli. Expression of crdxr and crmecs genes was up-regulated in periwinkle cells producing monoterpenoid indole alkaloids. Involvement of the 2C-methyl-D-erythritol 4-phosphate pathway in alkaloid biosynthesis is discussed.

Acid-induced unfolding of the tetrameric glucose/xylose isomerase (GXI) from Streptomyces sp. NCIM 2730 has been investigated using intrinsic fluorescence, fluorescence quenching, second derivative spectroscopy, hydrophobic dye (1-anilino-8-naphthalene-sulfonate) binding and CD techniques. The pH dependence of tryptophanyl fluorescence of GXI at different temperatures indicated the presence of two stable intermediates at pH 5.0 and pH 3.0. The pH 3.2 intermediate was a dimer and exhibited molten globule-like characteristics, such as the presence of native-like secondary structure, loss of tertiary structure, increased exposure of hydrophobic pockets, altered microenvironment of tyrosine residues and increased accessibility to quenching by acrylamide. Fluorescence and CD studies on GXI at pH 5.0 suggested the involvement of a partially folded intermediate state in the native to molten globule state transition. The partially folded intermediate state retained considerable secondary and tertiary structure compared to the molten globule state. This state was characterized by its hydrophobic dye binding capacity, which is smaller than the molten globule state, but was greater than that of the native state. This state shared the dimeric status of the molten globule state but was prone to aggregate formation as evident by the Rayleigh light scattering studies. Based on these results, the unfolding pathway of GXI can be illustrated as: N-->PFI-->MG-->U; where N is the native state at pH 7.5; PFI is the partially folded intermediate state at pH 5.0; MG is the molten globule state at pH 3.2 and U is the monomeric unfolded state of GXI obtained in the presence of 6 M GdnHCl. Our results demonstrate the existence of a partially folded state and molten globule state on the unfolding pathway of a multimeric alpha/beta barrel protein.

The present knowledge on the stereochemical mechanism of action of glucose (or xylose) isomerase, one of the highest tonnage industrial enzymes, is summarized. First we deal shortly with experimental methods applied to study the structure and function of this enzyme: enzyme kinetics, protein engineering, X-ray crystallography, nuclear magnetic and electron paramagnetic resonance spectroscopy. Computational methods like homology modeling, molecular orbital, molecular dynamics and continuum electrostatic methods are also shortly treated. We discuss mostly those results and their contribution to the elucidation of the mechanism of action that have been published in the last decade. Structural characteristics of free xylose isomerase as well as its complexes with various ligands are depicted. This information provides a tool for the study of structural details of the enzyme mechanism. We present a general mechanism where the first step is ring opening, which is followed by the extension of the substrate to an open-chain conformation, a proton shuttle with the participation of a structural water molecule and the rate-determining hydride shift. The role of metal ions in the catalytic process is discussed in detail. Finally we present main trends in efforts of engineering the enzyme and delineate the prospective future lines. The review is completed by an extended bibliography with over 100 citations.

The basic theory and principles of the multiple-wavelength anomalous solvent-contrast (MASC) method are introduced as a contrast-variation technique for generating low-resolution crystallographic phase information on the envelope of a macromolecule. Experimental techniques and practical considerations concerning the choice of anomalous scatterer, sample preparation and data acquisition are discussed. Test cases of crystals of three proteins of differing molecular weights from 14 kDa through to 173 kDa are illustrated. Methods for extracting the moduli of the anomalous structure factors from the MASC data are briefly discussed and the experimental results are compared with the known macromolecular envelopes. In all cases, the lowest resolution shells exhibit very large anomalous signals which diminish at higher resolution, as expected by theory. However, in each case the anomalous signal persists at high resolution, which is strong evidence for ordered sites of the anomalous scatterers. For the smaller two of these proteins the heavy-atom parameters could be refined for some of these sites. Finally, a novel method for phasing the envelope structure-factor moduli is presented. This method takes into account the relatively low number of observations at low resolution and describes the macromolecular envelope with a small number of parameters by presuming that the envelope is a compact domain of known volume. The parameterized envelope is expressed as a linear combination of independent functions such as spherical harmonics. Phasing starts from solutions of a sphere in the unit cell after positional refinement from random trials and the parameters describing the envelope are then refined against the data of structure-factor moduli. The preliminary results using simulated data show that the method can be used to reconstruct the correct macromolecular envelope and is able to discriminate against some false solutions.

The present work aimed to proof the functionality of the non-mevalonate pathway in cyanobacteria. It was intended to isolate the 1-deoxy-D-xylulose 5-phosphate (DXP) reductoisomerase gene (dxr), as this gene encodes the enzyme which catalyzes a pathway-specific, indicative step of this pathway. For this purpose, a segment of dxr was amplified from Synechococcus leopoliensis SAUG 1402-1 DNA via PCR using oligonucleotides for conserved regions. Subsequent hybridization screening of a genomic cosmid library of S. leopoliensis with the PCR segment led to the identification of a 26. 5 kbp locus on which a dxr homologous gene and two adjacent open reading frames organized in one operon were localized by DNA sequencing. The functionality of the gene was demonstrated expressing the gene in Escherichia coli and using the purified gene product in a photometrical NADPH dependent test based on the substrate DXP generating system. While the content of one of the central intermediates of the isoprenoid biosynthesis (dimethylallyl diphosphate=DMADP) was significantly (P

Xylose metabolism, a variable phenotype in strains of Lactococcus lactis, was studied and evidence was obtained for the accumulation of mutations that inactivate the xyl operon. The xylose metabolism operon (xylRAB) was sequenced from three strains of lactococci. Fragments of 4.2, 4.2, and 5.4 kb that included the xyl locus were sequenced from L. lactis subsp. lactis B-4449 (formerly Lactobacillus xylosus), L. lactis subsp. lactis IO-1, and L. lactis subsp. lactis 210, respectively. The two environmental isolates, L. lactis B-4449 and L. lactis IO-1, produce active xylose isomerases and xylulokinases and can metabolize xylose. L. lactis 210, a dairy starter culture strain, has neither xylose isomerase nor xylulokinase activity and is Xyl(-). Xylose isomerase and xylulokinase activities are induced by xylose and repressed by glucose in the two Xyl(+) strains. Sequence comparisons revealed a number of point mutations in the xylA, xylB, and xylR genes in L. lactis 210, IO-1, and B-4449. None of these mutations, with the exception of a premature stop codon in xylB, are obviously lethal, since they lie outside of regions recognized as critical for activity. Nevertheless, either cumulatively or because of indirect affects on the structures of catalytic sites, these mutations render some strains of L. lactis unable to metabolize xylose.