Search

Abstract: Hexagonal and cubic cadmium selenide were prepared from a chemical route by using cadmium chloride and potassium selenium hydride obtained from reaction of selenium powder and potassium boron hydride. The product obtained was thermally treated under argon flux at 300, 500 and 600°C for 2h and characterized by X-ray photoelectron spectroscopy and X-ray diffraction. The X-ray diffraction data were refined by Rietveld method and the structural parameters were determined for the phases of each annealed samples. At 300°C five phases were identified: Cubic and hexagonal cadmium selenides and the contaminants: Potassium chloride, boron oxide and cadmium boron oxide. At 500 and 600°C only the hexagonal cadmium selenide phase was identified besides the other above mentioned contaminant. [Copyright &y& Elsevier]

Self-assembled nanocrystals grown by epitaxy represent a viable way to mass produce quantum structures exhibiting novel electronic properties. In order to infer the electronic properties of such systems, knowledge of both composition and strain is necessary. Here, detailed maps of these quantities were obtained by anomalous X-ray diffraction for samples grown at 600 °C and 700 °C by chemical vapor deposition and molecular beam epitaxy, respectively - two different temperatures and growth techniques. From these maps, the elastic energies stored in the islands were evaluated. It was found that the elastic energy is concentrated at the island borders, regardless of the growth temperature or method. In contrast, the regions with the lowest elastic energy were the island core and top. These results provide insight into the mechanisms that govern the growth and evolution of strained nanocrystals. [ABSTRACT FROM AUTHOR]

We investigate the magnetic field dependence of the magnetic and structural phase transition of an epitaxial MnAs layer grown on GaAs (1 0 0) by using SQUID magnetometry and X-ray diffraction. The phase transition temperatures obtained from magnetic and structural results revealed an apparent splitting for magnetic field less than ∼1 kOe, while for higher magnetic fields a behavior similar to that reported for bulk MnAs is observed. [Copyright &y& Elsevier]

The production of controlled doping in two-dimensional semiconductor materials is a challenging issue when introducing these systems into current and future technology. In some compounds, the coexistence of distinct crystallographic phases for a fixed composition introduces an additional degree of complexity for synthesis, chemical stability, and potential applications. In this work, we demonstrate that a multiphase In 2 Se 3 layered semiconductor system, synthesized with three distinct structures─rhombohedral α and β-In 2 Se 3 and trigonal δ-In 2 Se 3 ─exhibits chemical stability and well-behaved n-type doping. Scanning tunneling spectroscopy measurements reveal variations in the local electronic density of states among the In 2 Se 3 structures, resulting in a compound system with electronic bandgaps that range from infrared to visible light. These characteristics make the layered In 2 Se 3 system a promising candidate for multigap or broad spectral optical devices, such as detectors and solar cells. The ability to tune the electronic properties of In 2 Se 3 through structural phase manipulation makes it ideal for integration into flexible electronics and the development of heterostructures with other materials.

The discovery of ferroelectricity in two-dimensional van der Waals materials has sparked enormous interest from the scientific community, due to its possible applications in next-generation nanoelectronic devices, such as random-access memory devices, digital signal processors, and solar cells, among others. In the present study, we used vapor phase deposition to synthesize ultrathin germanium sulfide nano-flakes on a highly oriented pyrolytic graphite substrate. Nanostructures of variable thicknesses were characterized using scanning tunneling microscopy and spectroscopy. Tunneling currents under forward and backward biases were measured as a function of nano-flake thickness. Remarkably, we clearly observed a hysteresis pattern, which we attributed to surface ferroelectric behavior, consistent with the screening conditions of polarization charges. The effect increases as the number of layers is reduced. This experimental result may be directly applicable to miniaturized memory devices, given the two-dimensional nature of this effect.

The prediction of semiconductor device performance is a persistent challenge in materials science, and the ability to anticipate useful specifications prior to construction is crucial for enhancing the overall efficiency. In this study, we investigate the constituents of a solar cell by employing scanning tunneling microscopy (STM) and spectroscopy (STS). Through our observations, we identify a spatial distribution of the dopant type in thin films of materials that were designed to present major p-doping for germanium sulfide (GeS) and dominant n-doping for tin disulfide (SnS 2 ). By generating separate STS maps for each semiconductor film and conducting a statistical analysis of the gap and doping distribution, we determine intrinsic limitations for the solar cell efficiency that must be understood prior to processing. Subsequently, we fabricate a solar cell utilizing these materials (GeS and SnS 2 ) via vapor phase deposition and carry out a characterization using standard J - V curves under both dark/illuminated irradiance conditions. Our devices corroborate the expected reduced efficiency due to doping fluctuation but exhibit stable photocurrent responses. As originally planned, quantum efficiency measurements reveal that the peak efficiency of our solar cell coincides with the range where the standard silicon solar cells sharply decline. Our STS method is suggested as a prequel to device development in novel material junctions or deposition processes where fluctuations of doping levels are retrieved due to intrinsic material characteristics such as the occurrence of defects, roughness, local chemical segregation, and faceting or step bunching.

A long-circulating and pH-sensitive liposome containing paclitaxel (SpHL-PTX) was recently developed by our group. Once in an acidic environment, for example, tumors, these liposomes undergo destabilization, releasing the encapsulated drug. In this way, the aim of this study was to evaluate the molecular and supramolecular interactions between the lipid bilayer and PTX in similar biological environment conditions. High-sensitivity analyses of SpHL-PTX structures were obtained by the small-angle X-ray scattering technique combined with other techniques such as dynamic light scattering, asymmetric flow field-flow fractionation, transmission electron microscopy, and high-performance liquid chromatography. The results showed that PTX incorporation in the liposomal bilayer clearly leads to changes in supramolecular organization of dioleoylphosphatidylethanolamine (DOPE) molecules, inducing the formation of more ordered structures. Changes in supramolecular organization were observed at lower pH, indicating that pH sensitivity was preserved even in the presence of fetal bovine serum proteins. Furthermore, morphological and physicochemical characterization of SpHL-PTX evidenced the formation of nanosized dispersion suitable for intravenous administration. In conclusion, a stable nanosized dispersion of PTX was obtained at pH 7.4 with suitable parameters for intravenous administration. At lower pH conditions, the pH sensitivity of the system was clearly evidenced by changes in the supramolecular organization of DOPE molecules, which is crucial for the delivery of PTX into the cytoplasm of the targeted cells. In this way, the results obtained by different techniques confirm the feasibility of SpHL as a promising tool to PTX delivery in acidic environments, such as tumors.

The goal of this work is to study transformations that occur upon heating Bi 2 Se 3 to temperatures up to 623 K. X-ray diffraction (XRD) and scanning tunneling microscopy (STM) and spectroscopy (STS) techniques were used in our investigation. XRD was measured following the 00L and 01L truncation rods. These measurements revealed that upon heating there is a coexistence of a major Bi 2 Se 3 phase and other ones that present structures of quintuple-layers intercalated with Bismuth bilayers. STM measurements of the surface of this material showed the presence of large hexagonal Bi x Se y domains embedded in a Bi 2 Se 3 matrix. STS experiments were employed to map the local electronic density of states and characterize the modifications imposed by the presence of the additional phases. Finally, density functional theory (DFT) calculations were performed to support these findings.

The use of nanoparticles for diagnostic approaches leads to higher accumulation in the targeting tissue promoting a better signal-to-noise ratio and consequently, early tumor detection through scintigraphic techniques. Such approaches have inherent advantages, including the possibility of association with a variety of gamma-emitting radionuclides available, among them, Tecnethium-99m ( 99m Tc). 99m Tc is readily conjugated with nanoparticles using chelating agents, such as diethylenetriaminepentaacetic acid (DTPA). Leveraging this approach, we synthesized polymeric micelles (PM) consisting of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol)-2000] (DSPE-mPEG 2000 ) functionalized with DTPA for radiolabeling with 99m Tc. Micelles made up of DSPE-mPEG 2000 and DSPE-PEG 2000 -DTPA had a mean diameter of  ∼10nm, as measured by DLS and SAXS techniques, and a zeta potential of -2.7±1.1mV. Radiolabeled micelles exhibited high radiochemical yields and stability. In vivo assays indicated long blood circulation time (456.3min). High uptake in liver, spleen and kidneys was observed in the biodistribution and imaging studies on healthy and tumor-bearing mice. In addition, a high tumor-to-muscle ratio was detected, which increased over time, showing accumulation of the PM in the tumor region. These findings indicate that this system is a promising platform for simultaneous delivery of therapeutic agents and diagnostic probes., (Copyright © 2017 Elsevier Masson SAS. All rights reserved.)

In the present work, we study the role of different components in the formation of more stable iron oxide magnetic nanoparticles (MNPs): β-cyclodextrin (BCD), 2-hydroxypropyl-β-cyclodextrin (HP) and citrate anion. MNPs formulations were characterized by FTIR, particles size measurements, zeta potential based on dynamic light scattering principle technique, X-ray powder pattern diffraction, XPS spectroscopy, transmission electron microscopy and thermogravimetric analysis. The results showed that cyclodextrins and citrate plays a key role in order to obtain a lower size of coated MNPs and proved to be an efficient strategy to obtain a more stable colloidal dispersion, avoiding the nanoparticles oxidation, enhancing the irinotecan incorporation and release. Furthermore, citrate-coated BCD-MNPs showed the same cytotoxicity of the free IRI., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Paclitaxel is a potent antimicrotubule chemotherapeutic agent widely used for clinical treatment of a variety of solid tumors. However, the low solubility of the drug in aqueous medium and the toxic effects of the commercially available formulation, Taxol(®), has hindered its clinical application. To overcome these paclitaxel-related disadvantages, several drug delivery approaches have been thoroughly investigated. In this context, our research group has developed long-circulating and pHsensitive liposomes containing paclitaxel composed of dioleylphosphatidylethanolamine, cholesterylhemisuccinate and distearoylphosphatidylethanolamine-polyethylene glycol2000, which have shown to be very promising carriers for this taxane. For the destabilization of pH-sensitive liposomal systems and the release of the encapsulated drug in the cytoplasm of tumor cells, the occurrence of a phase transition from a lamellar to a non-lamellar phase of dioleylphosphatidylethanolamine molecules is essential. Two techniques, differential scanning calorimetry and small angle X-ray scattering, were used to investigate the influence of the liposomal components and paclitaxel in the phase transition process of dioleylphosphatidylethanolamine molecules and to evaluate the pH-sensitivity of the formulation under low hydration conditions. The findings clearly evidence the phase transition of dioleylphosphatidylethanolamine molecules in the presence and absence of PTX indicating that the introduction of the drug in the system does not bring damage to the pH-sensitivity of the system, which resulting in liposome destabilization at low pH regions and encapsulated paclitaxel release preferentially in a desired target tissue., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Mucopolysaccharidosis type I (MPS I) is an autosomal disease caused by alpha-L-iduronidase deficiency. This study proposed the use of cationic nanoemulsions as non-viral vectors for a plasmid (pIDUA) containing the gene that codes for alpha-L-iduronidase. Nanoemulsions composed of medium chain triglycerides (MCT)/1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE)/1,2-dioleoyl-sn-glycero-3-trimethylammonium propane (DOTAP)/1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol)-2000] (DSPE-PEG) were prepared by high pressure homogenization. Formulations were prepared by the adsorption or encapsulation of preformed pIDUA-DOTAP complexes into the oil core of nanoemulsions at different charge ratios. pIDUA complexed was protected from enzymatic degradation by DNase I. The physicochemical characteristics of complexes in protein-containing medium were mainly influenced by the presence of DSPE-PEG. Bragg reflections corresponding to a lamellar organization were identified for blank formulations by energy dispersive X-ray diffraction, which could not be detected after pIDUA complexation. The intravenous injection of these formulations in MPS I knockout mice led to a significant increase in IDUA activity (fluorescence assay) and expression (RT-qPCR) in different organs, especially the lungs and liver. These findings were more significant for formulations prepared at higher charge ratios (+4/-), suggesting a correlation between charge ratio and transfection efficiency. The present preclinical results demonstrated that these nanocomplexes represent a potential therapeutic option for the treatment of MPS I., (Copyright © 2015. Published by Elsevier B.V.)

Ursolic acid (UA) is a triterpene found in different plant species that has been shown to possess significant antitumor activity. However, UA presents a low water solubility, which limits its biological applications. In this context, our research group has proposed the incorporation of UA in long-circulating and pH-sensitive liposomes (SpHL-UA).These liposomes, composed of dioleylphosphatidylethanolamine (DOPE), cholesteryl hemisuccinate (CHEMS), and distearoylphosphatidylethanolamine-polyethylene glycol2000 (DSPE-PEG2000), were shown to be very promising carriers for UA. Considering that the release of UA from SpHL-UA and its antitumor activity depend upon the occurrence of the lamellar to non-lamellar phase transition of DOPE, in the present work, the interactions of UA with the components of the liposomes were evaluated, aiming to clarify their role in the structural organization of DOPE. The study was carried out by differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS) under low hydration conditions. DSC studies revealed that DOPE phase transition temperatures did not shift significantly upon UA addition. On the other hand, in SAXS studies, a different pattern of DOPE phase organization was observed in the presence of UA, with the occurrence of the cubic phase Im3m at 20 °C and the cubic phase Pn3m at 60 °C. These findings suggest that UA interacts with the lipids and changes their self-assembly. However, these interactions between the lipids and UA were unable to eliminate the lamellar to non-lamellar phase transition, which is essential for the cytoplasmic delivery of UA molecules from SpHL-UA.

The determination of the molecular structure of a porphyrin is achieved by using nuclear magnetic resonance (NMR) and scanning tunneling microscopy (STM) techniques. Since macroscopic crystals cannot be obtained in this system, this combination of techniques is crucial to solve the molecular structure without the need for X-ray crystallography. For this purpose, previous knowledge of the flatness of the reagent molecules (a porphyrin and its functionalizing group, a naphthalimide) and the resulting molecular structure obtained by a force-field simulation are used. The exponents of the I-V curves obtained by scanning tunneling spectroscopy (STS) allow us to check whether the thickness of the film of molecules is greater than a monolayer, even when there is no direct access to the exposed surface of the metal substrate. Photoluminescence (PL), optical absorption, infrared (IR) reflectance and solubility tests are used to confirm the results obtained here with this NMR/STM/STS combination.

Atomic force microscopy image analysis and energy dispersive X-ray diffraction experiments were used to investigate the structural organization of cationic nanoemulsion/oligonucleotide complexes. Oligonucleotides targeting topoisomerase II gene were adsorbed on cationic nanoemulsions obtained by means of spontaneous emulsification procedure. Topographical analysis by atomic force microscopy allowed the observation of the nanoemulsion/oligonucleotide complexes through three-dimensional high-resolution images. Flattening of the oil droplets was observed, which was reduced in the complexes obtained at high amount of adsorbed oligonucleotides. In such conditions, complexes exhibit droplet size in the 600nm range. The oligonucleotides molecules were detected on the surface of the droplets, preventing their fusion during aggregation. A lamellar structure organization was identified by energy dispersive X-ray diffraction experiments. The presence of the nucleic acid molecules led to a disorganization of the lipid arrangement and an expansion in the lattice spacing, which was proportional to the amount of oligonucleotides added., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Topological insulators such as Bi2Se3 and Bi2Te3 have extremely promising transport properties, due to their unique electronic behavior: they are insulators in the bulk and conducting at the surface. Recently, the coexistence of two types of surface conducting channels has been observed for Bi2Se3, one being Dirac electrons from the topological state and the other electrons from a conventional two-dimensional gas. As an explanation for this effect, a possible structural modification of the surface of these materials has been hypothesized. Using scanning tunneling microscopy we have directly observed the coexistence of a conducting bilayer and the bare surface of bulk-terminated Bi2Te3. X-ray crystal truncation rod scattering was used to directly show the stabilization of this epitaxial bilayer which is primarily composed of bismuth. Using this information, we have performed density functional theory calculations to determine the electronic properties of the possible surface terminations. They can be used to understand recent angular resolved photoemission data which have revealed this dual surface electronic behavior.

Amorphous silica nanowires have been produced by thermal annealing of Si/SiO2/Ni substrate structures at 900 degrees C under an atmosphere of hexamethyldisilazane (HMDS) and hydrogen (H2). The wires have diameter ranging from 35 to 55 nm, which are controlled by the Ni particle size. It is demonstrated that the growth occurs through vapor-liquid-solid mechanisms, and it is proposed that the vapor source is volatile SiO generated from the etching of the Si substrate through active oxidation reactions. The role of the HMDS-H2 atmosphere in promoting such reactions is discussed.