Search

Pelvic ring injuries are uncommon but serious injuries. Percutaneous sacro-iliac screw fixation (SSF) is the standard treatment for posterior stabilization of pelvic fractures. Compression forces of the SSF might cause deformity of the sacrum and the pelvic ring. The aim of this radio-volumetric study is to evaluate the morphometry of the sacrum and pelvic ring in SSF for posterior pelvic fractures. (1) Methods: We conducted a radio-volumetric study measuring the bony sacral volume before and after SSF for a pelvic fracture based on a three-dimensional reconstruction of the pre- and postoperative computed tomography scan of 19 patients with a C-type pelvic fracture. In addition to the bony sacral volume, we assessed the pelvic deformity and the load bearing axis. We compared the results of patients without anterior stabilization (Group A) to patients who had additional ORIF of the anterior pelvic ring. (2) Results: Median age of the patients was 41.2 years (±17.8). All patients received percutaneous SSF with partially threaded 7.3 mm screws. The sacral volume decreased from 202.9 to 194.3 cm 3 in group A (non-operative treatment anterior, n = 10) and an increase of sacral volume from 229.8 to 250.4 cm 3 in group B (anterior ORIF; n = 9). Evaluation of the pelvic deformity also reflected this trend by a decrease of the ipsilateral load-bearing angle in group A (37.0° to 36.4°) and an increase of this angle in group B (36.3 to 39.9°). (3) Conclusions: Bony sacral volume and pelvic deformity after sacro-iliac screw fixation in pelvic fractures depend on treatment of the anterior pelvic ring. Reduction and fixation of the anterior fracture shows an increase of the bony sacral volume and the load bearing angle leading to a closer to normal reconstruction of the pelvic anatomy., Competing Interests: The authors declare that there is no conflict of interest.

Objective: To investigate the biological effects of electronic cigarette (e-cigarette) and heated tobacco product extracts respect to tobacco smoke extract on human gingival fibroblasts and human oral keratinocytes analysing cell viability, morphology, migration, apoptosis, cell cycle and epithelial-mesenchymal transition (EMT)., Design: Human gingival fibroblasts and human oral keratinocytes viability was analysed by MTT assay, cell morphology using scanning electron microscope (SEM) and cell migration by Scratch assay, a method that mimics the cell migration during wound healing in vivo. Apoptosis and cell cycle were analysed with flow cytometry and the related-gene expression of TP53, BCL2, CDKN2A and CDKN1A was indagated using real-time polymerase chain reaction. EMT process was analysed through expression of specific markers: CDH1, SNAI2, TWIST1, MMP2, FN1 and VIM. All investigations were evaluated after 24 h an in vitro exposure., Results: Undiluted tobacco smoke extract induced significant inhibition of cell viability and cell migration, caused morphological alterations and induced an increase in cell death. No alterations or damage were observed after treatment with e-cigarette extracts. Heated tobacco product extract induced proliferation as highlighted by an increase of cell viability, cell migration and alterations of cycle analysis., Conclusions: Comparing the different cigarette extracts, tobacco smoke turns out to be the most harmful, e-cigarette did not determine morphological and functional alterations and heated tobacco product must be carefully investigated for its possible clinical effects on oral cell populations., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The estimation of the age of the majority of living subjects is widely required nowadays due to the presence of unidentifiable individuals, without documents and general information, involved in migration or legal procedures. Dental age estimation (DAE) is a valid method for investigating the age of subjects. The aim of this study was to evaluate the accuracy of the Demirjian method in a limited age group (16-24 years) in differentiating between older and younger than 18 years. From an initial sample of 17,594 radiographs, 460 were selected meeting the inclusion criteria. Two dentists provided the age estimate according to the Demirjian method, with a simplified approach based on the development of the third molars. The presence of a developmental stage of H for at least one third molar allowed to establish the major age if the other third molars, inferior or superior, have reached a stage equal or superior to F, with an accuracy of 90.2% and a predictive positive value of 91.6%. Thirty-three patients showed the development of at least one third molar (Stage H) before the age of 18 years while six patients showed the development of all four third molars with root completion (stage H) before the age of 18 years. When all third molars reached stage H an individual was over 18 years old in 97.4% of cases. In presence of one third molar on stage H and a stage equal or superior to F for the other third molars the probability of being of major age was 91.6%.

This systematic review examine the biological effects of CBD, a major component of therapeutic Cannabis, on human pathological and cancer cell populations of integumentary, gastro-intestinal, genital and breast, respiratory, nervous, haematopoietic and skeletal districts in terms of cell viability, proliferation, migration, apoptosis, inflammation, metastasis, and CBD receptor expression. The included studies were in English, on human cell lines and primary culture from non-healthy donors with CBD exposure as variable and no CBD exposure as control. Quality assessment was based on ToxRtool with a reliability score ranging from 15 to 18. Following the PRISMA statement 4 independent reviewers performed an electronic search using MEDLINE via PubMed, Scopus and Web of Science. From 3974 articles, 83 studies have been selected. Data showed conflicting results due to different concentration exposure, administrations and time points. CBD inhibited cell viability and proliferation in most cellular districts except the integumentary apparatus. Also a significant inhibition of migration was observed in all cell types, while an increase in apoptosis at both high and low doses (greater and less than 10 μM respectively). Considering inflammation, CBD caused an anti-inflammatory effect on nervous cells at low doses and on gastro-intestinal cells at high doses, while metastatic power was reduced even at low doses, but in a skeletal cell line there was an increased angiogenesis. CB1 receptor has been related to viability effects, CB2 to apoptosis and TRPV1 to inflammation and invasiveness. A detailed insight into these aspects would allow therapeutic use of this substance without possible side effects., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Bone metabolism has been rarely investigated in children affected by Neurofibromatosis type 1 (NF1). Aim of the present study was to assess bone mineral metabolism in children and adults NF1 patients, to determine the relevant factors potentially involved in the development of reduced bone mineral density (BMD), and provide possible therapeutic intervention in NF1 patients. 114 NF1 patients and sex and age matched controls were enrolled into the study. Clinical and biochemical factors reflecting bone metabolism were evaluated. Factors potentially affecting BMD were also investigated including: physical activity, sun exposure, vitamin D intake. Whenever the presence of vitamin D deficiency was recorded, cholecalciferol supplementation was started and z-score data obtained at Dual-Energy X-ray Absorptiometry (DXA) during supplementation were compared with previous ones. NF1 patients showed lower Z-scores at Dual-Energy X-ray Absorptiometry DXA than controls. Physical activity was significantly reduced in NF1 patients than in controls. Sun exposure was significantly lower in NF1 compared to control subjects. At linear regression analysis vitamin D was the most predictive factor of reduced z-score at DXA (p = 0.0001). Cholecalciferol supplementation significantly increased BMD z-score (p < 0.001). We speculated that a combination of different factors, including reduced sun exposure, possibly associated with reduced serum vitamin D levels, and poor physical activity, concur to the impaired bone status in NF1 patients. We also demonstrated that treatment with vitamin D can be effective in improving z-score value in NF1 patients, including children. In conclusion, the findings of the current study are expected to have important implications for the follow-up and prevention of osteopenia/osteoporosis in this common genetic disease., (© 2022. The Author(s).)

Background: Bleeding anomalies have been reported in patients affected by Noonan syndrome. No study has been performed in patients with molecularly confirmed RASopathy. We aimed to characterize the frequency and types of bleeding disorders in patients with RASopathies and evaluate any significant association with laboratory findings., Patients and Methods: Forty-nine individuals (PTPN11, n = 27; SOS1, n = 7; RIT1, n = 3; SPRED1, n = 1; LZTR1, N = 3; RAF1, n = 2; BRAF, n = 4; MEK1, n = 1; MEK2, n = 1), and 49 age- and sex-matched controls were enrolled. The "Paediatric Bleeding Questionnaire Scoring Key" was administered to patients and families. Laboratory screening tests including clotting factors dosing, platelet count, Prothrombin Time and Partial Thromboplastin Time, were employed both in patients and controls to characterize the bleeding diathesis. A subgroup of 29/49 patients and 29/49 controls was also tested for platelet function., Results: Regardless of the gene involved, pathological paediatric bleeding scores were recorded in 14/49 (28.5%) patients. Indeed, 7 were mutated in PTPN11, 3 in SOS1, 2 in RIT1, 1 in BRAF, and 1 in MEK1. Compared to patients with normal bleeding scores, those with pathologic bleeding score showed higher prevalence of splenomegaly (p = 0.006), prolonged aPTT (p = 0.04), lower levels of coagulation factor V (FV, p = 0.001), FVII (p = 0.003), FX (p = 0.0008) and FXIII (p = 0.002), higher vWAg (p = 0.04), and lower platelet sensitivity to Ristocetin (p = 0.001), arachidonic acid (AA) (p = 0.009) and collagen (p = 0.01). The presence of hematomas inversely correlated with factor V (p = 0.002), factor VII (p = 0.003), factor X (p = 0.002) and factor XIII (p = 0.004) levels, and directly correlated with platelet response to collagen (p = 0.02) and AA (p = 0.01). The presence of splenomegaly directly correlated with the presence of hematoma (p = 0.006), platelet response to Ristocetin (p = 0.04) and AA (p = 0.04), and inversely correlated with factor V levels (p = 0.03)., Conclusions: Patients with RASopathies and a bleeding tendency exhibit multiple laboratory abnormalities, including platelet-related disorders. Splenomegaly is frequently detected and might be a suggestive sign for qualitative platelet dysfunction. A comprehensive clinical assessment should be carried out at diagnosis, during the follow-up and before any surgical procedures. Since there is currently no consensus on management of bleeding complications, it is important that physicians closely monitor these patients., (© 2021. The Author(s).)

Dental caries and periodontal disease represent a health problem and a social cost for the entire population, and in particular for socio-economically disadvantaged individuals who are less resistant to disease. The aim of this review is to estimate the prevalence and severity of the two dental pathologies, caries and periodontal disease, in the different classes of socio-economically disadvantaged subjects and to understand which of them are most affected. A systematic search of the literature was performed in MEDLINE (via PubMed), EMBASE and Web of Science after establishing a suitable search strategy for each database, using keywords related to socio-economically vulnerable classes and health outcomes. Socio-economically disadvantaged individuals are more susceptible to tooth decay and periodontal disease (with relative tooth loss) than non-vulnerable people. Additionally, when multiple vulnerabilities are combined in the same subject, these oral diseases worsen. There is no type of vulnerability more affected by caries and periodontitis than others, since overall they all have severe disease indices. The data from this systematic literature review might be useful for health policy makers looking to allocate more resources and services to socially disadvantaged individuals, resulting in making them more resilient to oral disease due to their social marginalization.

Objectives: The aim of this work is to investigate the biological effects of IQOS smoking on human gingival fibroblasts and human keratinocytes analysing cell viability, morphology, migration, apoptosis and cell cycle., Background: Electronic cigarettes and tobacco heating systems have been marketed to reduce smoking damages caused by combustion., Methods: Human gingival fibroblasts and human keratinocytes viability was determined by a colorimetric assay measuring mitochondrial dehydrogenase activity (MTT assay); after an in vitro exposure of 24 h, cell morphology was analysed with scanning electron microscope and cell migration was tested by Scratch assay, a method to mimic the migration of the cells during wound healing in vivo. Apoptosis and cell cycle were analysed with flow cytometry, and the expression of related genes (p53, Bcl2, p16 and p21) was indagated using real-time polymerase chain reaction., Results: IQOS extracts increased both cell viability (23%-41% with fibroblasts and 30%-79% with keratinocytes) and migration. No morphological alterations were observed. IQOS extracts did not induced an increase in cell death, but rose the number of S- and G2/M-phase cells. IQOS extracts also significantly increased p53 expression by fibroblasts (undiluted and 6.25% dilution, 2- and 3.6-fold higher, respectively) and reduced both Bcl2 (about two- and fivefold, respectively) and p21 expressions (about twofold with both extracts), while on keratinocytes both undiluted and 6.25% dilution extracts increased Bcl2 expression (about four- and threefold higher, respectively) and reduced p53 expression (about two- and fivefold, respectively)., Conclusion: IQOS smoke seemed to induce proliferation as highlighted by a viability assay, and migration and cell cycle analysis. The increased cell proliferation induced by IQOS devices must be carefully investigated for its possible clinical effects on oral cell populations., (© 2021 The Authors. Journal of Periodontal Research published by John Wiley & Sons Ltd.)

The aim of this study is to investigate the Erbium:Yttrio-Aluminum-Granate (Er:YAG) laser photothermal and mechanical effects on cariogenic species concentration and on the microbial load composition of therapeutic cavities, in order to evaluate the possible micro-organisms reduction and make a comparison with manual and rotating conventional therapy (CT). A clinical trial was designed, including adults with active deep carious lesions on permanent teeth who were divided into two groups, i.e., control group and intervention group treated with CT and Er:YAG therapy, respectively. Before and after any conservative treatment, two oral samples were collected using a small sterile microbrush scrubbed within the base of the dentinal cavity tissue. The percentage of reduction and the colony-forming units (CFUs) count after Er:YAG and conventional treatments were compared for total microorganisms, including Candida spp., Streptococcus spp., and Lactobacillus spp. The microbial reduction varied from 90.2% to 100% and was significantly observed for total microorganisms and Streptococcus spp. ( p < 0.05). The Er:YAG laser shows the potential for clinical applications, especially with paediatric and complicated patients, thanks to its minimally invasive properties and its effect on the reduction of microbial load.

Liver fibrosis (LF) is a dangerous clinical condition with no available treatment. Inflammation plays a critical role in LF progression. Glucocorticoid-induced leucine zipper (GILZ, encoded in mice by the Tsc22d3 gene) mimics many of the anti-inflammatory effects of glucocorticoids, but its role in LF has not been directly addressed. Here, we found that GILZ deficiency in mice was associated with elevated CCL2 production and pro-inflammatory leukocyte infiltration at the early LF stage, resulting in enhanced LF development. RNA interference-mediated in vivo silencing of the CCL2 receptor CCR2 abolished the increased leukocyte recruitment and the associated hepatic stellate cell activation in the livers of GILZ knockout mice. To highlight the clinical relevance of these findings, we found that TSC22D3 mRNA expression was significantly downregulated and was inversely correlated with that of CCL2 in the liver samples of patients with LF. Altogether, these data demonstrate a protective role of GILZ in LF and uncover the mechanism, which can be targeted therapeutically. Therefore, modulating GILZ expression and its downstream targets represents a novel avenue for pharmacological intervention for treating LF and possibly other liver inflammatory disorders.

To analyze the effects of four universal adhesives (Optibond Solo Plus-OB, Universal Bond-UB, Prime&Bond Active-PBA, FuturaBond M + -FB) on human gingival fibroblasts in terms of cytotoxicity, morphology and function. After in vitro exposure for up to 48 h, fibroblast viability was determined by the MTT assay determined, morphology by phase-contrast microscopy and migration by the scratch wound assay. Expression levels of IL1β, IL6, IL8, IL10, TNFα and VEGF genes were assessed by RT-PCR and their protein production by Western blot analysis. Apoptosis and cell cycle were analyzed by flow cytometry. OB and UB induced early morphological changes on fibroblasts (3 h) with extended cell death at 24 h/48 h. Gene expression of collagen type I and fibronectin increased fivefold compared with controls, elastin disappeared and elastase increased threefold, indicating gingival tissue tended to become fibrotic. Only UB and OB increased gene expression of inflammatory markers: IL1β at 3 and 48 h (up to about three times), IL6 and IL8 at 3 h (up to almost four times) which corresponded to the increase of the activated form NF-kB. All adhesives showed an effect on the functionality of fibroblasts with cytotoxic effect time and concentration dependent. Among all the OB and UB adhesives, they showed the greatest cell damage. The in-depth analysis of the effects of universal adhesives and possible functional effects represents an important information for the clinician towards choosing the most suitable adhesive system.

Objective: To compare the mechanical and biological features of a polymethylmethacrylate (PMMA) disc for CAD/CAM prostheses (test samples, TG) with a traditional resin (control samples, CG)., Methods: Mechanical analysis was performed using Dynamic Mechanical Analysis (DMA) and Brillouin's micro-spectroscopy. Human keratinocyte morphology and adhesion were analyzed by scanning electronic microscopy (SEM), cytotoxicity by the MTT assay, apoptosis by flow cytometry and p53, p21 and bcl2 gene expression by real time PCR., Results: TG exhibited a higher elastic modulus than CG (range 5100-5500 ± 114.3 MPa vs 3000-3300 ± 99.97 MPa). The Brillouin frequency was found at ω B = (15.50 ± 0.05) GHz for TG and at ω B&#95;1 = (15.50 ± 0.05) GHz and ω B&#95;2 = (15.0 ± 0.1) GHz for CG where two peaks were always present independently of the sample point. SEM analysis revealed that keratinocytes on TG disks appeared to be flattened with lamellipodia. Keratinocytes on CG disks rose above the substrate with cytoplasmatic filaments. MTT viability data at 3 h and 24 h showed TG was significantly less cytotoxic than CG (p < 0.001). No significant differences emerged in apoptosis on CG and TG. Real-time PCR showed p53 expression increased after 3 h by about 9-fold in keratinocytes on TG (p < 0.001) and about 5-fold in those on CG (p < 0.001). High p53 expression persisted after 24 h on both disks. No significant variations were observed in p21 and bcl2 expression at any time-point., Significance: PMMA resins, as used in CAD/CAM technology, displayed suitable biocompatible and mechanical properties for removable prostheses., (Copyright © 2020 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

A systematic review was performed to evaluate the biological effects of Cannabidiol (CBD), one of the major components of Cannabis Sativa, on normal human healthy cell populations in terms of cell viability, proliferation, migration, apoptosis and inflammation. Inclusion criteria were: studies on cell lines and primary cell culture from healthy donors, CBD exposure as variable, no CBD exposure as control and published in English language. Quality assessment was based on ToxR tool, with a score of reliability ranging from 15 to 18.Following the PRISMA statement, three independent reviewers performed both a manual and an electronic search using MEDLINE via PubMed, Scopus, Web of Science and Cochrane. From a total of 9437eligible articles, 29 studies have been selected. The average quality assessment score was 16.48.Theresults showed heterogeneous CBD concentration exposure (0.01-50 μM or 0.1 nmol/mL-15 mg/mL). The definition of a threshold limit would allow the identification of specific effects on expected outcomes. From the data obtained CBD resulted to inhibit cell viability in a dose-dependent manner above 2 μM, while in oral cell populations the inhibitory concentration is higher than 10 μM. Moreover, it was observed a significantly inhibition of cell migration and proliferation. On the contrary, it was highlighted a stimulation of apoptosis only at high doses (from 10 μM).Finally, CBD produced an anti-inflammatory effect, with a reduction of the pro-inflammatory cytokine gene expression and secretion. CBD down-regulated ROS production, although at high concentrations (16 μM) increased ROS-related genes expression. The diffusion of CBD for therapeutic and recreational uses require a precise definition of its potential biological effects. A thorough knowledge of these aspects would allow a safe use of this substance without any possible side effects., (Copyright © 2020. Published by Elsevier Masson SAS.)

Objective: To assess the effectiveness of lasers (at sub-ablative parameters) in reducing caries incidence compared with traditional prophylactic interventions (TPIs) when used alone or together with other TPIs such as pits and fissures sealant or fluoride gels or varnishes., Design: A systematic review. Data sources include Medline (via PubMed), Embase, Web of Science and the Cochrane Library (December 2019)., Eligibility Criteria: Only randomised trials (RCTs) and controlled clinical trials (CCTs) dealing with prophylactic lasers use (vs TPI or untreated teeth) were considered as eligible. We excluded in vitro and ex vivo studies., Data Extraction: Eligible studies were selected and data extracted independently by two reviewers. Risk of bias was assessed adopting the Cochrane Risk of Bias tool. Data on caries incidence, sealant retention, fluoride uptake, adverse events, treatment duration, patients' discomfort and cost-effectiveness ratio was extracted., Data Analysis: Extracted data were presented narratively due to the heterogeneity of included studies., Results: Seven RCTs and two CCTs, all with an evident risk of bias, met inclusion criteria, pooling together 269 individuals and 1628 teeth. CO 2 , neodymium-doped yttrium aluminium garnet, erbium-doped yttrium aluminum garnet (Er:YAG), erbium, chromium: yttrium scandium gallium garnet (Er,Cr:YSGG) and Argon lasers were used. In the permanent dentition, lasers only when used in combination with TPIs were effective in reducing caries when compared with untreated teeth (risk ratio (RR)=0.44 (0.20-0.97); Er:YAG laser) or with TPIs used alone (RR=0.39 (0.22-0.71); CO 2 laser). Moreover, Argon laser significantly improved the fluoride uptake into the enamel surfaces (ANalysis Of VAriance (ANOVA) tests: 95%, p<0.0001). Likewise, sealant retention improved when acid etching was performed on previously irradiated enamel fissures by CO 2 laser (RR=0.63 (0.38-1.04)) or Er:YAG laser (RR=0.54 (95% CI: 0.34 to 0.87)). In addition, laser resulted safe and well tolerated by patients., Conclusion: Despite some positive indications, an inadequate level of evidence was found in the included studies concerning the lasers' effectiveness in preventing caries. Further studies with a higher methodological quality level are required., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2020. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Pending the availability of vaccines to contain the SARS-CoV-2 pandemic, the current solution is "social distancing" with a reduction of dental treatments to those assessed as urgent and emergency cases. These treatments also involve Early Childhood Caries (ECC) due to the fact that this disease affects preschool children (a vulnerable population) and, in addition, shows a propensity to evolve into more serious complications (dental pain, infections). A narrative review was carried out to support a protocol for treating ECC with efficacious and safe (in terms of SARS-CoV-2 transmission) procedures. Protocol involves criteria for patients' selection remotely (telemedicine), and well-detailed criteria/equipment and hygiene procedures to combat against SARS-CoV-2 transmission. Moreover, the protocol proposes innovative caries treatments, named Minimally Invasive Treatments (MITs), well known in pedodontics for their high level of children's acceptance during dental care. MITs allow for caries removal (particularly in primary teeth) without any high-speed rotating instrument cooled with nebulized air-water spray (with high risk of virus environmental diffusion), usually adopted during traditional treatments. For evaluating MITs effectiveness in caries management, only Systematic Review and Randomized Controlled Trials (RCTs) were included in our study, without any risk of bias assessment. The indications proposed in this protocol could support clinicians for the temporary management of ECC until the SARS-CoV-2 pandemic ends.

Purpose: Critical care units, such as heart failure units, house inpatients with a compromised general health status that requires rigorous prevention of further complications. Oral health infections that gain access through the bloodstream or airway might represent such potential complications (eg, endocarditis pneumonia). Avoiding these critical occurrences requires that adequate oral health care be provided by nursing personnel. Here we assessed the knowledge of oral health care practices by nurses working in three Italian heart failure units in Umbria, Italy., Design: This was a cross-sectional study., Methods: Forty-four nurses were interviewed using a six-item modified Adams' questionnaire on the topic of oral health care. A multidisciplinary panel of experts established the criteria for answer correctness based on the most relevant dentistry literature evidence and judged each reply. The expected percentage of correctly replying nurses was 75%, and significant differences from this expected probability were calculated with one-sided binomial probability tests. Cronbach's α method was used to establish the questionnaire's internal consistency (reliability)., Results: For five out of six questionnaire items, the percentage of nurses who correctly answered was significantly lower than the expected value of probability. Lack of knowledge was found for usefulness of checking the patients' mouths (p=0.003), the most relevant lesions affecting the mouth (p=0.0001), the tools/solutions for cleaning the mouth and dentures (p= 0.0416), and drugs that affect the mouth and their side effects (p<0.0001)., Conclusion: In this study, few nurses working in heart failure units showed both an adequate willingness to check inpatients and a good knowledge of oral health care (significantly lower than the expected 75%). Further studies that use validated questionnaires and include more participants should be conducted to confirm and elaborate on our preliminary data., Competing Interests: The authors indicate no conflicts of interest in this scientific work., (© 2020 Cianetti et al.)

Universal adhesives are the most important innovation in restorative dentistry. They are composed of different monomers, solvents and fillers. The potential cytotoxic effect of these materials is an important scientific aspect in recent literature. The aim of this study was to determine, using different in vitro techniques, the cytotoxicity evaluation of seven universal enamel-dental adhesives on human gingival fibroblasts. For this purpose, seven universal dental enamel adhesives have been evaluated by in vitro cytotoxicity tests using direct contact tests (an unpolymerized and a polymerized method) and an indirect contact test: preparation of extracts. The polymerized method showed a cytotoxicity range from 36% (G-PremioBond, GPB) to 79% (FuturaBond M+, FB). With the unpolymerized direct methods the range was from 4% (Prime&Bond Active, PBA) to 40% (Ibond Universal, IB) for undiluted adhesives; generally passing to the major dilutions the test showed a strong inhibitory activity by all the adhesives. Whereas with the indirect method by diluting the extracts of all dental adhesives the cell viability increased. The data obtained from the work has shown a lower cytotoxic effect of Optibond Solo Plus (OB) and Adhesive Universal (AU) with more reliable results with the extracts technique. The choice of reliable in vitro cytotoxic technique could represent, in dental practice, an important aid for clinical procedures in the use of adhesive systems., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The quality of dental arch impression has a substantial role in the precision of the intervention. It is traditionally acquired with resins that solidify when in contact with the air. Compared to that method, digital impression gives great advantages and, together with three-dimensional (3D) digitization devices, allows a simplification of the digital impression process. The growing adoption of such systems by a large number of dental clinics determines the need for an in-depth evaluation of the accuracy and the precision of the different systems. The aim of this work is to define a methodology for the evaluation of the accuracy and precision of 3D intraoral and desktop scanning systems, by using volumetric and linear methods. The replica of a tooth was realized with zirconium; afterward, high-accuracy point clouds of the master model were acquired by a coordinate measurement machine (CMM). In this way, the dimensions of the replica were accurately known. An intraoral scanner (I) and three desktops (D1, D2, D3) were then used to scan the replica. The geometry resulting from the CMM was compared with the ones derived from the scanners, using two different commercial programs (Geomagic and 3-Matic) and a custom-developed algorithm (MATLAB). Geomagic showed the mean values to be in a range from 0.0286 mm (D1) to 0.1654 mm (I), while 3-Matic showed mean values from -0.0396 mm (D1) to 0.1303 mm (I). MATLAB results ranged from 0.00014 mm (D1) to 0.00049 mm (D2). The probability distributions of the volumetric error of the measurements obtained with the different scanners allow a direct comparison of their performances. For the results given by our study, the volumetric approach that we adopted appears to be an excellent system of analysis.

This clinical report describes the use of a 3-dimensional (3D) printer to create an individual mold for delivering high-dose-rate interventional radiotherapy for hard palate cancer. The maxillary teeth and palate were scanned with an intraoral scanner (3Shape TRIOS 3). The scan was transformed into a mesh using the standard tessellation language (STL) format and aligned with Digital Imaging and Communications in Medicine (DICOM) computed tomography (CT) images using free Blue Sky Plan 4 planning software. A mold was generated by tracing a guideline around the gingival margins of the maxillary teeth and palate on the scan mesh in accordance with established parameters. All data were imported into computer-aided design (CAD) software. For this patient, 3 parallel 2.2-mm-diameter ducts were placed 10 mm from each other in the mold mesh. A CT scan of the patient's mouth with the mold in place was used for treatment planning. Treatment was delivered by means of microSelectron digital afterloading., (Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The study evaluated the effects of 4 wt% nanohydroxyapatite (HA), 6 wt% zinc l-carnosine (MDA) and 1.5 wt% Ciprofloxacin (AB) on the mechanical, thermal and biological properties of glass ionomer cements (GIC). Filler and additive concentrations were selected after a previous study had tested single components and different percentages. Specimens included five silicon molds of each GIC cement for all tests. They were stored at room temperature for 24 h from specimen collection to analysis. Mechanical tests, calorimetric analysis, morphological investigation, antibacterial and cell viability assays were conducted. One-way analysis of variance (ANOVA) was used for data analysis with significance set at p < 0.05. Adding HA, MDA and AB to GICs modified their thermal, mechanical and microbiological properties. Polymerization increased. A slight decrease in the compressive strength of modified GICs was observed in dry condition (p < 0.05). Cement extracts affected cell viability in relation to extract dilution. Mechanical behavior improved in modified glass ionomer cements, especially with the powder formulated antibiotic. Overall cytotoxicity was reduced. Therefore adding nanohydroxyapatite, antibiotic and a mucosal defensive agent to conventional glass ionomer cement in special need patients could improve the clinical, preventive and therapeutic performance of the cements, without altering their mechanical properties., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The birth of the Degree in Dentistry in Italy has been very troubled, and only in 1980 saw its effective implementation. Very "instructive" in this regard is the history on the establishment in 1924 (the period of the seizure of power by Fascism) of a "National School of Dentistry" at the University of Rome, which was withdrawn after only ten months. The biggest supporter and proponent of the School, Prof. Angelo Chiavaro, after a few years, was "punished" with the transfer from the University of Rome to that of Genoa. We present some brief notes on the biography of this courageous pioneer and the matter of which he was the protagonist.

The aim of this work was to evaluate the stress distribution inside endodontically treated teeth restored with different posts (glass fibre, carbon fibre and steel posts) under different loading conditions by using a 3D-finite element analysis. The effect of masticatory and impact forces on teeth with different degrees of bone loss was analysed. The model consists of: dentine, post, cement, gutta-percha, core and crown. Four simulations were conducted with two static forces (170N horizontal and 100N oblique) and two sections constrained: 1mm (alveolar bone position in a normal periodontium) and 6mm (middle of root) below the crown. Von Mises and the principal stresses were evaluated and analysed with a 3-way ANOVA and Tukey test (α=0.05) and the effect of fibre percentage analysed. Significant differences were found among the stress values for all conditions (p<0.05). Impact load was always responsible for the most critical situation especially when the bone loss was more evident. The system with steel posts showed the highest principal stresses at the post-cement interface with horizontal load and top constraints (compressive stress of 121MPa and tensile stress of 115MPa). The use of glass posts provides a more homogeneous behaviour of the system with lower stresses. Higher fibre percentages gave higher stress in the posts. Moreover, larger bone losses are responsible for important increase in stress. Thus, this work demonstrated that periodontal disease has an important role in the success of tooth restoration after endodontic therapy, influencing the choice of post material and depth., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Introduction: Over the past 10-15 years, Italy has undergone a social transformation, and the class of employees and workers has become more economically stable with a higher buying power. Along with the increased expectations of patients on the quality of life, it has now become a priority to make health and social services ready to face users bearing new requirements and different needs., Objectives: To provide a description of the state of health of the operating personnel of the Finance Police (Guardia di Finanza), including elements for planning the most appropriate interventions for health promotion and prevention., Methods: The study analyzed the health condition of a group of soldiers (178 subjects, divided into different age classes) by evaluating the effectiveness of a training and information program and subsequently the level of benefit., Results: The study population showed a good state of health correlated to the quality of life. Although the population voluntarily submitted to health assessment, the rigour of the calls and briefings carried out in the military health unit and the attention of the group to follow instructions on prevention underlined a positive trend, even in behaviours considered as health-risky., Conclusions: Socio-cultural components and the work environment influence the quality of life. In the case of military health care, the specific military organization was useful to monitor the health condition of the population, maximizing the effectiveness of services, enhancing the information and carrying out prevention strategies and demand of care, which should be an example for the public health services.

Johann Baptist Ritter von Spix (1781-1826), a German zoologist, was famous in his time and highly honored after making one of the first exploration voyages in the wildest part of Brazil. He was almost forgotten in the annals of history for nearly two centuries after his birth, at which time some enlightened biographers brought him back into prominence in both the biological and zoological fields. On the contrary though, he had never been forgotten in the science of odontostomatology thanks to his discovery of the "Lingula Mandibularis" also known as "Spine of Spix". Johannes Baptist Spix was born in Hoechstadt, Germany in 1781. He was the Conservator of the Museum of Natural History in Munich and was a distinguished Comparative Anatomist. He died Munich inl 1826. The purposes of this work are to present some biographical notes on J.B. Ritter von Spix, to explain whythe "Lingula Mandibularis" has been called by the name of Spix and why this eponym has been used as such.

The aim of this study was to investigate the mechanical behavior of a dental system built up with fiber-reinforced composite (FRC) endodontic posts with different types of fibers and two cements (the first one used with a primer, the second one without it). Six FRC posts were used. Each system was characterized in terms of structural efficiency under external applied loads similar to masticatory forces. An oblique force was applied and stiffness and maximum load data were obtained. The same test was used for the dentine. The systems were analyzed by scanning electron microscope (SEM) to investigate the surface of the post and inner surface of root canal after failure. The mechanical tests showed that load values in dental systems depend on the post material and used cement. The highest load (281 ± 59 N) was observed for the conical glass fiber posts in the cement without primer. There was a 50 and 85% increase in the maximum load for two of the conical posts with glass fibers and a 229% increase for the carbon fiber posts in the cement without primer as compared with the cement with primer. Moreover, almost all the studied systems showed fracture resistances higher than the typical masticatory loads. The microscopic analysis underlined the good adhesion of the second cement at the interfaces between dentine and post. The mechanical tests confirmed that the strength of the dental systems subjected to masticatory loads was strictly related to the bond at the interface post/cement and cement/dentine., (Copyright © 2013 Wiley Periodicals, Inc.)

The most original contribution made by the Italian School to the study of caries aetiology is undoubtedly the "trophomicrobic theory" proposed by Arturo Beretta, the first teacher of dentistry at the University of Bologna in 1918. This article brings biographical and bibliographical notes about Beretta (who was, among other things, Dean of the Faculty of Medicine of Bologna and Senator), and summarises the principles of his theory, which adds to Miller's "chemical-parasitic" theory of caries-predisposing properties of the enamel and host saliva. It also recalls the work of major Italian and non-Italian researchers who have used or modified Beretta's idea.

Objectives: The aim of this study was to investigate the mechanical properties of five types of fibre-reinforced composite (FRC) posts and compare them with traditional metal post., Methods: Five FRC posts and a metallic post having different geometry and type of fibre (glass, carbon or quartz fibre) were loaded to failure in compression and bending. The transverse sections of FRC posts were observed using SEM to evaluate the fracture mode and the percentage of fibres (compared with burn-off test). Densities and voids content were also evaluated., Results: Mechanical results were subjected to a one-way ANOVA and Tukey test (p<0.05). In compression, quartz fibre posts exhibited the greater maximum load and ultimate strength, carbon fibre posts showed a poor compressive behaviour. All posts had similar compressive moduli. Carbon posts showed the highest flexural properties (p<0.0001) while glass posts the greater maximum load. The fracture load values correlated to the diameters of posts showed a parabolic behaviour. The flexural strengths of all posts were four and seven times higher than dentine. The elastic moduli of almost all posts were similar to dentine. The compressive strengths were lower than flexural strengths. The fibre diameters ranged from 5.2 to 26 μm, the volume percentage of fibres was about 64%. The content of voids of some posts lower their mechanical behaviour., Conclusions: Compressive properties of FRC posts were lower than in bending. The flexural properties of FRC posts were higher than the metal post and similar to dentine. The mechanical behaviour is influenced by voids., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Background: Skeletal-muscle-derived stem cells seem to be a distinct population of immature progenitors of satellite cells, but their functional properties remain unclear, especially in human adult tissue. We investigated their differentiation in samples of skeletal muscle obtained from adults undergoing cardiovascular surgery., Methods: Samples were obtained from the brachioradialis muscle of 12 patients in whom the radial artery was the conduit for myocardial revascularisation. The stem cells were isolated by a procedure similar to that used for rat gastrocnemius and cultured in medium optimised for growth of neural stem cells. Cytometry was used for phenotypic characterisation and immunocytochemistry and RT-PCR to assess differentiation. Immunohistochemistry was used to examine engraftment of skeletal-muscle-derived stem cells into injured rat spinal cord., Findings: The skeletal-muscle stem cells consisted of two distinct types: one with the typical spindle morphology of satellite cells, the other of rounded cells. Some cultures could be maintained for longer than 6 months. The cells were mainly positive for desmin and to a lesser extent CD105, vimentin, and AC133/CD133, but negative for FLK-1/KDR, CD34, CD31, CD45, von Willebrand factor, Ve-cadherins, and BCL2. After in-vitro differentiation, the cells were able to organise skeletal-muscle fibres and stained positively for striated-muscle actin, smooth-muscle actin, and desmin. Moreover, they differentiated into astrocytes and neurons, as confirmed by positive staining for characteristic proteins., Interpretation: Adult human skeletal muscle includes a population of progenitor stem cells that can generate cells of the same lineage and cells with neurogenic properties. Muscle may therefore be a tissue source for the isolation of pluripotent stem cells for development of cell-based therapies for human myogenic and neurogenic diseases.

Multiple sclerosis (MS) is a demyelinating disease of the central nervous system (CNS) mediated by blood-derived immune cells invading the CNS. This invasion could be determined by chemokines, and their role within the MS-affected brain is still poorly defined. We investigated the expression by RT-PCR and protein release by ELISA of the interferon-gamma (IFN-gamma)-inducible chemokines in human brain microvascular endothelial cells (HBMECs) and astrocytes. The monokine induced by IFN-gamma (Mig) behaves as a homing chemokine constitutively expressed in HBMECs and astrocytes, whereas the IFN-gamma-inducible 10-kDa protein (IP-10) and IFN-inducible T cell alpha-chemoattractant (I-TAC) are induced only after inflammatory stimuli. The biologic activity of IFN-gamma-inducible chemokines from an endothelial source was analyzed, and the transendothelial migration of activated lymphocytes was partly antagonized by specific antibodies, especially anti-Mig antibody. Our data highlight the capability of cells of the CNS to activate the chemoattractant machinery in a proinflammatory environment and in MS.