Search

Current work presents the first report on the modification of zirconia (ZrO 2) by doping it with the lanthanides oxides i.e. [samarium, europium, and thulium] forming a [Sm/Eu/Tm] co-doped ZrO 2 system. Lanthanide doping tailored the structure of host material by causing considerable bandgap energy shrinkage from 4.04 to 3.57 eV and reduction in the crystallite size from 67.92 to 45.23 nm. Profound electro-catalytic potential was reflected analyzed via linear sweep voltammetry showing the excellent of developed catalytic towards H 2 evolution with lower overpotential i.e. 133 mV and Tafel slope of 119.3 mV dec−1. While for O 2 evolution, the electro-catalyst succeeded in gaining overpotential and Tafel slope values of 310 mV and 294.8 mV dec−1, respectively. With such values, this material has surpassed the conventional electro-catalysts and is proved to be an excellent hydrogen producing electro-catalyst. The electrical charge storage potential was analyzed for [Sm/Eu/Tm] co-doped ZrO 2 decorated nickel foam electrode for development into a super-capacitor. This electrode was impressively stable for 10 cycles after 20 days checked through cyclic voltammetry. Furthermore, an augmented specific capacitance of 447 F g−1 was achieved by the doped electrode when compared with the pristine one approaching 83.69 F g−1. The electrical energy storage capacity of [Sm/Eu/Tm] co-doped ZrO 2 is even higher than the conventionally used metal oxides. In terms of the interfacial electrode-electrolyte, electrochemical impedance spectroscopy was done expressing the excellent ionic diffusion and electrochemically active sites for [Sm/Eu/Tm] co-doped ZrO 2 electrode with minimal resistance. The developed doped system was used a spacer layer in a cesium lead halide perovskite solar cells having planar architecture. The spacer layer containing solar cell device succeeded in gaining a power conversion efficiency of 16.31% and a fill factor of 78% evaluated via photo-current measurements carried out under artificial solar irradiance. The impressively higher fill factor shows the effective passivation and scaffolding by the [Sm/Eu/Tm] co-doped ZrO 2. The associated device was also marked by negligible hysteresis. Chrono-potentiometry and chrono-amperometry expressed commendable accelerated service lives for 100 min inside an electrolyte. The lanthanide co-doped ZrO 2 is an effective material for the utilization in energy systems associated with the electro-catalysis of water, charge storage electrode for super-capacitors, and photovoltaic solar to electrical energy conversion. [Display omitted] • Using lanthanide doped ZrO 2 as an effective OER/HER catalyst. • Excellent H 2 evolution activity in cost effective and facile manner. • Exploring the charge storage potential for supercapacitor application. • Augmented solar energy harvesting via ZrO 2 scaffolding in perovskite solar cell. • Extended services life signifying suitability for commercialization. [ABSTRACT FROM AUTHOR]

Abstract: Organic semiconductors can be employed as the active layer in accumulation mode organic electrochemical transistors (OECTs), where redox stability in aqueous electrolytes is important for long‐term recordings of biological events. It is observed that alkoxy‐benzo[1,2‐b:4,5‐b′]dithiophene (BDT) copolymers can be extremely unstable when they are oxidized in aqueous solutions. The redox stability of these copolymers can be improved by molecular design of the copolymer where it is observed that the electron rich comonomer 3,3′‐dimethoxy‐2,2′‐bithiophene (MeOT2) lowers the oxidation potential and also stabilizes positive charges through delocalization and resonance effects. For copolymers where the comonomers do not have the same ability to stabilize positive charges, irreversible redox reactions are observed with the formation of quinone structures, being detrimental to performance of the materials in OECTs. Charge distribution along the copolymer from density functional theory calculations is seen to be an important factor in the stability of the charged copolymer. As a result of the stabilizing effect of the comonomer, a highly stable OECT performance is observed with transconductances in the mS range. The analysis of the decomposition pathway also raises questions about the general stability of the alkoxy‐BDT unit, which is heavily used in donor–acceptor copolymers in the field of photovoltaics. [ABSTRACT FROM AUTHOR]

Thiophenes functionalised in the 3‐position are ubiquitous building blocks for the design and synthesis of organic semiconductors. Their non‐centrosymmetric nature has long been used as a powerful synthetic design tool exemplified by the vastly different properties of regiorandom and regioregular poly(3‐hexylthiophene) owing to the repulsive head‐to‐head interactions between neighbouring side chains in the regiorandom polymer. The renewed interest in highly electron‐rich 3‐alkoxythiophene based polymers for bioelectronic applications opens up new considerations around the regiochemistry of these systems as both the head‐to‐tail and head‐to‐head couplings adopt near‐planar conformations due to attractive intramolecular S−O interactions. To understand how this increased flexibility in the molecular design can be used advantageously, we explore in detail the geometrical and electronic effects that influence the optical, electrochemical, structural, and electrical properties of a series of six polythiophene derivatives with varying regiochemistry and comonomer composition. We show how the interplay between conformational disorder, backbone coplanarity and polaron distribution affects the mixed ionic‐electronic conduction. Ultimately, we use these findings to identify a new conformationally restricted polythiophene derivative for p‐type accumulation‐mode organic electrochemical transistor applications with performance on par with state‐of‐the‐art mixed conductors evidenced by a μC* product of 267 F V−1 cm−1 s−1. [ABSTRACT FROM AUTHOR]

Over the last decade, the organic electrochemical transistor (OECT) has appeared as a powerful platform for developing organic bioelectronic applications such as electronic biosensors and neuromorphic devices. The rapidly growing interest in this field has spurred the development of new active bioelectronic materials that are tailor-made to fulfil the mixed ionic-electronic conduction requirements of the OECT. While p-type (hole-transporting) organic semiconductors quickly appeared with impressive mixed conduction properties, their electron-transporting counterparts, n-type organic semiconductors have lagged severely in terms of OECT performance metrics. Here, we review recent progress on the development of n-type organic semiconductors, including both small-molecule and polymer systems, for OECT applications and discuss the bioelectronic applications that have emerged from the materials development. • Over the last couple of years, n-type semiconductors have progressed significantly in the context of mixed ionic-electronic conduction. • We review the recent literature on n-type semiconductors for bioelectronic applications covering both small-molecule and polymer systems and their OECT performance. • We give an overview of noteworthy applications that utilise these new materials and their specific properties and discuss the challenges and future directions of the field. [ABSTRACT FROM AUTHOR]

Electrolyte-gated organic transistors offer low bias operation facilitated by direct contact of the transistor channel with an electrolyte. Their operation mode is generally defined by the dimensionality of charge transport, where a field-effect transistor allows for electrostatic charge accumulation at the electrolyte/semiconductor interface, whereas an organic electrochemical transistor (OECT) facilitates penetration of ions into the bulk of the channel, considered a slow process, leading to volumetric doping and electronic transport. Conducting polymer OECTs allow for fast switching and high currents through incorporation of excess, hygroscopic ionic phases, but operate in depletion mode. Here, we show that the use of glycolated side chains on a thiophene backbone can result in accumulation mode OECTs with high currents, transconductance, and sharp subthreshold switching, while maintaining fast switching speeds. Compared with alkylated analogs of the same backbone, the triethylene glycol side chains shift the mode of operation of aqueous electrolyte-gated transistors from interfacial to bulk doping/transport and show complete and reversible electrochromism and high volumetric capacitance at low operating biases. We propose that the glycol side chains facilitate hydration and ion penetration, without compromising electronic mobility, and suggest that this synthetic approach can be used to guide the design of organic mixed conductors. [ABSTRACT FROM AUTHOR]

Abstract: Lactam-based semiconducting donor polymer materials often exhibit high performance in the photoactive layer of solution processed organic solar cells. In this review we focus on the structure–property–device performance relationships, offering a set of rational design rules for next generation materials from a chemical structure perspective. [Copyright &y& Elsevier]

Abstract: The theory of a hybrid quantum mechanics/molecular mechanics (QM/MM) approach for gauge-origin independent calculations of the molecular magnetizability using Hartree–Fock or Density Functional Theory is presented. The method is applied to liquid water using configurations generated from classical Molecular Dynamics simulation to calculate the statistical averaged magnetizability. Based on a comparison with experimental data, treating only one water molecule quantum mechanically appears to be insufficient, while a quantum mechanical treatment of also the first solvation shell leads to good agreement between theory and experiment. This indicates that the gas-to-liquid phase shift for the molecular magnetizability is to a large extent of non-electrostatic nature. [Copyright &y& Elsevier]

Multi-directional fused-ring electron acceptors (FREAs) feature a fused-ring backbone that extends in multiple directions through bridging and acceptor units. This unique structural design imparts several advantageous properties, like increased light absorption, precise energy level adjustments, improved electron mobility, reduced energy loss, and enhanced efficiency in organic photovoltaic (OPV) devices. In this study, we designed seven novel multi-directional FREAs and conducted a comprehensive computational analysis using Density Functional Theory (DFT) and Time-Dependent DFT (TD-DFT). The designed molecules feature a benzotrithienopyrrole central core connected to a π-bridge acceptor, either benzothiadiazole or benzotriazole, and three varying terminal acceptors, including malononitrile, 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile, and 2-(3-methyl-4-oxothiazolidin-2-ylidene)malononitrile. Our investigation encompassed the evaluation of geometry, frontier molecular orbitals (FMOs), optical properties, density of states (DOS), charge mobilities, dipole moment, global reactivity descriptors, molecular electrostatic potential (MEP), transition density matrix (TDM), and OPV device-related parameters. The results revealed significant potential of the designed molecules as FREAs for OPVs, thus highlighting their suitability for further experimental exploration. [Display omitted] • New multi-directional fused-ring electron acceptors show enhanced organic photovoltaic device properties. • Simplifying the core and incorporating π-bridge and terminal acceptors rivals or surpasses performance of existing designs. • Quantum modeling shows improved conjugation, reduced band gaps, orbitals degeneracy and improved optoelectronic properties. [ABSTRACT FROM AUTHOR]

Here we show how encapsulation of a squaraine dye in a rotaxane structure renders the dye that normally start decomposing at 100 °C stable above 250 °C. This thermal stabilisation makes new applications possible, and we demonstrate how the squaraine rotaxane can mediate laser welding of polyethylene, a process that requires thermal stability. [ABSTRACT FROM AUTHOR]

The effects of a solvent on the two-photon absorption of microsolvated formaldehyde and liquid water have been studied using hybrid coupled-cluster/molecular mechanics (CC/MM) response theory. Both water and formaldehyde were considered solvated in water, where the solvent water molecules were described within the framework of molecular mechanics. Prior to the CC/MM calculations, molecular dynamics simulations were performed on the water/formaldehyde and water/water aggregates and many configurations were generated. By carrying out CC/MM response calculations on the individual configurations, it was possible to obtain statistically averaged results for both the excitation energies and two-photon absorption cross sections. For liquid water, the comparison between one- and two-photon absorption spectra is in good agreement with the experimental data available in the literature. In particular, the lowest energy transition occurring in the one-photon absorption spectrum of water only occurs with a relatively small strength in the two-photon absorption spectrum. This result is important for the interpretation of two-photon absorption data as these results show that in the absence of selection rules that determine which transitions are forbidden, the spectral profile of the two-photon absorption spectrum can be significantly different from the spectral profile of the one-photon absorption spectrum. [ABSTRACT FROM AUTHOR]

A series of copolymers containing a glycolated 1,4‐dithienyl‐2,3,5,6‐tetrafluorophenylene unit copolymerized with thiophene, bithiophene, thienothiophene and 1,2,4,5‐tetrafluorobenzene comonomer units were designed and synthesised by direct heteroarylation polymerisation. The optical, electrochemical, electrochromic and solid‐state structural properties of the copolymers were investigated. The copolymers exhibit stable redox properties in organic solvents and promising redox properties in thin film configuration with an aqueous electrolyte. Finally, the potential of the copolymers as active materials in organic electrochemical transistors (OECTs) was assessed, and promising performance was shown as an accumulation‐mode OECT material with a peak transconductance of 0.17 mS and a good on/off ratio of 105 for the thiophene copolymer. [ABSTRACT FROM AUTHOR]

In this study, the end group polarity of (5,5′)-biphenyl-(2,2')-bithiophenes (PTTPs) was systematically varied from alkyl (1) to alkoxy (2) with one oxygen atom to glycol (3) with two oxygen atoms while the overall length of the end groups is kept constant. Thin films of the three compounds were sublimated at different substrate temperatures and their morphology, crystallinity and charge carrier transport in field-effect transistors was investigated to draw structure-property relationships for the PTTP derivatives. For all three compounds, the effective charge carrier mobility is improved with higher substrate temperatures at which films with higher crystallinity and larger grains are formed. The effective mobility decreases with higher polarity of the end groups from alkyl to alkoxy and glycol. The reliability factor of the alkyl (1) and alkoxy (2) substituted PTTPs decreases with higher substrate temperature, but at the same time this value is enhanced for the glycol substituted molecules (3). The transistors of 3 prepared at higher substrate temperatures also show a reduced threshold voltage and smaller hysteresis in the transfer characteristics. These insights are important for the understanding of the impact of oxygen incorporation into side chain/end group substituents of organic semiconductors and their implementation in organic electrochemical transistors, thermoelectrics and photovoltaics. [Display omitted] • The end group polarity of biphenyl-bithiophenes was systematically varied from alkyl to alkoxy and glycol. • Structure-property relationships were determined for sublimated films of the three compounds. • The effective charge carrier mobility of the compounds is improved with higher substrate temperature. • The effective mobility decreases with higher polarity of the end groups from alkyl to alkoxy and glycol. • The insights are important to understand the impact of oxygen incorporation into end groups of organic semiconductors. [ABSTRACT FROM AUTHOR]

Abstract: We report on studies of poly-(2,5-dihexyloxy-p-phenylenevinylene) (PDHeOPV), a symmetric side-chain polymer, as a potential new donor material for polymer:fullerene blend solar cells. We study the surface morphology of blend films of PDHeOPV with PCBM, the transport properties of the blend films, and the performance of photovoltaic devices made from such blend films, all as a function of PCBM content. In each case, results are compared with those obtained using the asymmetric side chain polymer, poly[2-methoxy-5-(3,7-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV), in order to investigate the influence of polymer side chain symmetry on solar cell performance. AFM images show that large PCBM aggregates appear at lower PCBM content (50wt.% PCBM) for PDHeOPV:PCBM than for MDMO-PPV:PCBM (67wt.% PCBM) blend films. Time-of-Flight (ToF) mobility measurements show that charge mobilities depend more weakly on PCBM content in PDHeOPV:PCBM than in MDMO:PPV:PCBM, with the result that at high PCBM content the mobilities in PDHeOPV:PCBM are significantly lower than in MDMO:PPV:PCBM blend films, despite the higher mobilities in pristine PDHeOPV compared to pristine MDMO-PPV. Photovoltaic devices show significantly lower power conversion efficiency (∼0.93%) for PDHeOPV:PCBM (80wt.% PCBM) blend films than for MDMO-PPV:PCBM (2.2% at 80wt.% PCBM) blends. This is attributed to the relatively poor transport properties of the PDHeOPV:PCBM blend, which limit the optimum thickness of the photoactive layer in PDHeOPV:PCBM blend devices. The behaviour is tentatively attributed to a higher tendency for the symmetric side-chain polymer chains to aggregate, resulting in poorer interaction with the fullerene and poorer network formation for charge transport. [Copyright &y& Elsevier]

A rapidly growing interest in organic bioelectronic applications has spurred the development of a wide variety of organic mixed ionic-electronic conductors. While these new mixed conductors have enabled the community to interface organic electronics with biological systems and efficiently transduce biological signals (ions) into electronic signals, the current materials selection does not offer sufficient selectivity towards specific ions of biological relevance without the use of auxiliary components such as ion-selective membranes. Here, we present the molecular design of an n-type (electron-transporting) perylene diimide semiconductor material decorated with pendant oligoether groups to facilitate interactions with cations such as Na + and K + . Using the cyclic 15-crown-5 oligoether motif, we find that the resulting mixed conductor PDI-crown displays a strong dependence on the size of the electrolyte cation when tested in an organic electrochemical transistor configuration. In stark contrast to the low current response on the order of 1 μA observed with aqueous sodium chloride, a nearly 200-fold increase in current is observed with aqueous potassium chloride. We ascribe the high selectivity to extended molecular aggregation and therefore efficient charge transport in the presence of K + due to a favourable sandwich-like structure between two adjacent 15-crown-5 motifs and the potassium ion., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Organic mixed ionic-electronic conductors (OMIECs) have emerged as promising materials for biological sensing, owing to their electrochemical activity, stability in an aqueous environment, and biocompatibility. Yet, OMIEC-based sensors rely predominantly on the use of composite matrices to enable stimuli-responsive functionality, which can exhibit issues with intercomponent interfacing. In this study, an approach is presented for non-enzymatic glucose detection by harnessing a newly synthesized functionalized monomer, EDOT-PBA. This monomer integrates electrically conducting and receptor moieties within a single organic component, obviating the need for complex composite preparation. By engineering the conditions for electrodeposition, two distinct polymer film architectures are developed: pristine PEDOT-PBA and molecularly imprinted PEDOT-PBA. Both architectures demonstrated proficient glucose binding and signal transduction capabilities. Notably, the molecularly imprinted polymer (MIP) architecture demonstrated faster stabilization upon glucose uptake while it also enabled a lower limit of detection, lower standard deviation, and a broader linear range in the sensor output signal compared to its non-imprinted counterpart. This material design not only provides a robust and efficient platform for glucose detection but also offers a blueprint for developing selective sensors for a diverse array of target molecules, by tuning the receptor units correspondingly., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

Organic semiconductor small molecules and polymers often incorporate heteroatoms into their chemical structures to affect the electronic properties of the material. A particular design philosophy has been to use these heteroatoms to influence torsional potentials, since the overlap of adjacent π-orbitals is most efficient in planar systems and is critical for charge delocalization in these systems. Since these design rules became popular, the messages from the earlier works have become lost in a sea of reports of "conformational locks", where the non-covalent interactions have relatively small contributions to planarizing torsional potentials. Greater influences can be found in the stabilization by extended conjugation, consideration of steric repulsion, and the interactions involving solubilizing chains and neighboring molecules or polymer chains in condensed phases., (© 2024 The Authors. ChemPlusChem published by Wiley-VCH GmbH.)

Despite the growing interest in dynamic behaviors at the frequency domain, there exist very few studies on molecular orientation-dependent transient responses of organic mixed ionic-electronic conductors. In this research, we investigated the effect of ion injection directionality on transient electrochemical transistor behaviors by developing a model mixed conductor system. Two polymers with similar electrical, ionic, and electrochemical characteristics but distinct backbone planarities and molecular orientations were successfully synthesized by varying the co-monomer unit (2,2'-bithiophene or phenylene) in conjunction with a novel 1,4-dithienylphenylene-based monomer. The comprehensive electrochemical analysis suggests that the molecular orientation affects the length of the ion-drift pathway, which is directly correlated with ion mobility, resulting in peculiar OECT transient responses. These results provide the general insight into molecular orientation-dependent ion movement characteristics as well as high-performance device design principles with fine-tuned transient responses., (© 2023. The Author(s).)

This review article provides a comprehensive overview of recent advancements in electron transport materials derived from quinoxaline, along with their applications in various electronic devices. We focus on their utilization in organic solar cells (OSCs), dye-sensitized solar cells (DSSCs), organic field-effect transistors (OFETs), organic-light emitting diodes (OLEDs) and other organic electronic technologies. Notably, the potential of quinoxaline derivatives as non-fullerene acceptors in OSCs, auxiliary acceptors and bridging materials in DSSCs, and n-type semiconductors in transistor devices is discussed in detail. Additionally, their significance as thermally activated delayed fluorescence emitters and chromophores for OLEDs, sensors and electrochromic devices is explored. The review emphasizes the remarkable characteristics and versatility of quinoxaline derivatives in electron transport applications. Furthermore, ongoing research efforts aimed at enhancing their performance and addressing key challenges in various applications are presented., (Copyright © 2023, Abid et al.)

A series of polythiophenes with varying side chain density was synthesized, and their electrical and thermoelectric properties were investigated. Aligned and non-aligned thin films of the polymers were characterized in the neutral and chemically doped states. Optical and diffraction measurements revealed an overall lower order in the thin films with lower side chain density, also confirmed using polarized optical experiments on aligned thin films. However, upon doping the non-aligned films, a sixfold increase in electrical conductivity was observed for the polythiophene with the lowest side chain density compared to poly(3-hexylthiophene) (P3HT). We found that the improvement in conductivity was not due to a larger charge carrier density but an increase in charge carrier mobility after doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). On the other hand, doped aligned films did not show the same trend; lower side chain density instead led to a lower conductivity and Seebeck coefficient compared to those for P3HT. This was attributed to the poorer alignment of the polymer thin films with lower side chain density. The study demonstrates that optimizing side chain density is a synthetically simple and effective way to improve electrical conductivity in polythiophene films relevant to thermoelectric applications., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Thiophenes functionalised in the 3-position are ubiquitous building blocks for the design and synthesis of organic semiconductors. Their non-centrosymmetric nature has long been used as a powerful synthetic design tool exemplified by the vastly different properties of regiorandom and regioregular poly(3-hexylthiophene) owing to the repulsive head-to-head interactions between neighbouring side chains in the regiorandom polymer. The renewed interest in highly electron-rich 3-alkoxythiophene based polymers for bioelectronic applications opens up new considerations around the regiochemistry of these systems as both the head-to-tail and head-to-head couplings adopt near-planar conformations due to attractive intramolecular S-O interactions. To understand how this increased flexibility in the molecular design can be used advantageously, we explore in detail the geometrical and electronic effects that influence the optical, electrochemical, structural, and electrical properties of a series of six polythiophene derivatives with varying regiochemistry and comonomer composition. We show how the interplay between conformational disorder, backbone coplanarity and polaron distribution affects the mixed ionic-electronic conduction. Ultimately, we use these findings to identify a new conformationally restricted polythiophene derivative for p-type accumulation-mode organic electrochemical transistor applications with performance on par with state-of-the-art mixed conductors evidenced by a μC * product of 267 F V -1  cm -1  s -1 ., Competing Interests: The authors declare no conflict of interest., (© 2023 The Authors. Angewandte Chemie published by Wiley-VCH GmbH.)

Tailoring organic semiconductors to facilitate mixed conduction of ionic and electronic charges when interfaced with an aqueous media has spurred many recent advances in organic bioelectronics. The field is still restricted, however, by very few n-type (electron-transporting) organic semiconductors with adequate performance metrics. Here, a new electron-deficient, fused polycyclic aromatic system, TNR, is reported with excellent n-type mixed conduction properties including a µC* figure-of-merit value exceeding 30 F cm -1 V -1 s -1 for the best performing derivative. Comprising three naphthalene bis-isatin moieties, this new molecular design builds on successful small-molecule mixed conductors; by extending the molecular scaffold into the oligomer domain, good film-forming properties, strong π-π interactions, and consequently excellent charge-transport properties are obtained. Through judicious optimization of the side chains, the linear oligoether and branched alkyl chain derivative bgTNR is obtained which shows superior mixed conduction in an organic electrochemical transistor configuration including an electron mobility around 0.3 cm 2 V -1 s -1 . By optimizing the side chains, the dominant molecular packing can be changed from a preferential edge-on orientation (with high charge-transport anisotropy) to an oblique orientation that can support 3D transport pathways which in turn ensure highly efficient mixed conduction properties across the bulk semiconductor film., (© 2023 Wiley-VCH GmbH.)

The introduction of oligoether side chains onto a polymer backbone can help to stabilise polymeric dispersions in water without the necessity of surfactants or additives when conjugated polymer nanoparticles are prepared. A series of poly(3-hexylthiophene) (P3HT) derivatives with different content of a polar thiophene derivative 3-((2-methoxyethoxy)methyl)thiophene was interrogated to find the effect of the polar chains on the stability of the formed nanoparticles, as well as their structural, optical, electrochemical, and electrical properties. Findings indicated that incorporation of 10-20 percent of the polar side chain led to particles that are stable over a period of 42 days, with constant particle size and polydispersity, however the particles from the polymer with 30 percent polar side chain showed aggregation effects. The polymer dispersions showed a stronger solid-like behaviour in water with decreasing polar side chain content, while thin film deposition from water was found to afford globular morphologies and crystallites with more isotropic orientation compared to conventional solution-processed films. As a proof-of-principle, field-effect transistors were fabricated directly from the aqueous dispersions demonstrating that polymers with hydrophilic moieties can be processed in water without the requirement of surfactants.

The way in which conjugated polymers pack in the solid state strongly affects the performance of polymer-based optoelectronic devices. However, even for the most crystalline conjugated polymers the precise packing of chains within the unit cell is not well established. Here we show that by performing resonant X-ray diffraction experiments at the sulfur K-edge we are able to resolve the tilting of the planar backbones of crystalline poly(3-hexylthiophene) (P3HT) within the unit cell. This approach exploits the anisotropic nature of the X-ray optical properties of conjugated polymers, enabling us to discern between different proposed crystal structures. By comparing our data with simulations based on different orientations, a tilting of the planar conjugated backbone with respect to the side chain stacking direction of 30 ± 5° is determined.

Molecular doping-the use of redox-active small molecules as dopants for organic semiconductors-has seen a surge in research interest driven by emerging applications in sensing, bioelectronics, and thermoelectrics. However, molecular doping carries with it several intrinsic problems stemming directly from the redox-active character of these materials. A recent breakthrough was a doping technique based on ion-exchange, which separates the redox and charge compensation steps of the doping process. Here, the equilibrium and kinetics of ion exchange doping in a model system, poly(2,5-bis(3-alkylthiophen-2-yl)thieno(3,2-b)thiophene) (PBTTT) doped with FeCl 3 and an ionic liquid, is studied, reaching conductivities in excess of 1000 S cm -1 and ion exchange efficiencies above 99%. Several factors that enable such high performance, including the choice of acetonitrile as the doping solvent, which largely eliminates electrolyte association effects and dramatically increases the doping strength of FeCl 3 , are demonstrated. In this high ion exchange efficiency regime, a simple connection between electrochemical doping and ion exchange is illustrated, and it is shown that the performance and stability of highly doped PBTTT is ultimately limited by intrinsically poor stability at high redox potential., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Organic mixed ionic and electronic conductors are of significant interest for bioelectronic applications. Here, three different isoindigoid building blocks are used to obtain polymeric mixed conductors with vastly different structural and electronic properties which can be further fine-tuned through the choice of comonomer unit. This work shows how careful design of the isoindigoid scaffold can afford highly planar polymer structures with high degrees of electronic delocalization, while subtle structural modifications can control the dominant charge carrier (hole or electron) when probed in organic electrochemical transistors. A combination of experimental and computational techniques is employed to probe electrochemical, structural, and mixed ionic and electronic properties of the polymer series which in turn allows the derivation of important structure-property relations for this promising class of materials in the context of organic bioelectronics. Ultimately, these findings are used to outline robust molecular-design strategies for isoindigo-based mixed conductors that can support efficient p-type, n-type, and ambipolar transistor operation in an aqueous environment., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Small-molecule organic semiconductors have displayed remarkable electronic properties with a multitude of π-conjugated structures developed and fine-tuned over recent years to afford highly efficient hole- and electron-transporting materials. Already making a significant impact on organic electronic applications including organic field-effect transistors and solar cells, this class of materials is also now naturally being considered for the emerging field of organic bioelectronics. In efforts aimed at identifying and developing (semi)conducting materials for bioelectronic applications, particular attention has been placed on materials displaying mixed ionic and electronic conduction to interface efficiently with the inherently ionic biological world. Such mixed conductors are conveniently evaluated using an organic electrochemical transistor, which further presents itself as an ideal bioelectronic device for transducing biological signals into electrical signals. Here, we review recent literature relevant for the design of small-molecule mixed ionic and electronic conductors. We assess important classes of p- and n-type small-molecule semiconductors, consider structural modifications relevant for mixed conduction and for specific interactions with ionic species, and discuss the outlook of small-molecule semiconductors in the context of organic bioelectronics.

Albuminuria is a sensitive marker for renal dysfunction. Urinary dipstick tests are frequently used to screen for urinary abnormalities in the emergency department (ED). The aim of this prospective cohort study is to evaluate the usefulness of urinary dipstick testing as a screening tool for albuminuria in the ED setting and to determine the persistency of albuminuria identified in the acute setting. Urinary dipstick tests and spot urine samples were obtained simultaneously for analysis of the urinary albumin-creatinine ratio (ACR). Participants with positive dipsticks for protein were invited for a second urinalysis four to six weeks after admission. The study included 234 patients admitted to the ED. Urinalysis was performed on 178 patients of which 46% (n = 82) had positive urinary dipstick tests for proteinuria. The sensitivity and specificity of the dipstick test were low (72.7% and 55.7% respectively) when compared to the ACR. Of the 82 patients with positive dipsticks at admission, 35 were available for follow-up. We observed a significant reduction in ACR at follow-up when compared to ACR at admission ( p = 0.004). This paper concludes that urinary dipstick tests are not a reliable means to screen for albuminuria in the ED setting.

The adsorption structure of truxenone on Cu(111) was determined quantitatively using normal-incidence X-ray standing waves. The truxenone molecule was found to chemisorb on the surface, with all adsorption heights of the dominant species on the surface less than ∼2.5 Å. The phenyl backbone of the molecule adsorbs mostly parallel to the underlying surface, with an adsorption height of 2.32 ± 0.08 Å. The C atoms bound to the carbonyl groups are located closer to the surface at 2.15 ± 0.10 Å, a similar adsorption height to that of the chemisorbed O species; however, these O species were found to adsorb at two different adsorption heights, 1.96 ± 0.08 and 2.15 ± 0.06 Å, at a ratio of 1:2, suggesting that on average, one O atom per adsorbed truxenone molecule interacts more strongly with the surface. The adsorption geometry determined herein is an important benchmark for future theoretical calculations concerning both the interaction with solid surfaces and the electronic properties of a molecule with electron-accepting properties for applications in organic electronic devices., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The processability and optoelectronic properties of organic semiconductors can be tuned and manipulated via chemical design. The substitution of the popular alkyl side chains by oligoethers has recently been successful for applications such as bioelectronic sensors and photocatalytic hydrogen evolution. Beyond the differences in polarity, the carbon-oxygen bond in oligoethers is likely to render the system softer and more prone to dynamical disorder that can be detrimental to charge transport for example. In this context, we use neutron spectroscopy as a master method of probe, in addition to characterisation techniques such as X-ray diffraction, differential scanning calorimetry and polarized optical microscopy to study the effect of the substitution of n-hexyl (Hex) chains by triethylene glycol (TEG) chains on the structural dynamics of two organic semiconducting materials: a phenylene-bithiophene-phenylene (PTTP) small molecule and a fluorene-co-dibenzothiophene (FS) polymer. Counterintuitively, inelastic neutron scattering (INS) reveals a general softening of the modes of PTTP and FS materials with Hex chains, pointing towards an increased dynamical disorder in the Hex-based systems. However, temperature-dependent X-ray and neutron diffraction as well as INS and differential scanning calorimetry evidence an extra reversible transition close to room temperature for PTTP with TEG chains. The observed extra structural transition, which is not accompanied by a change in birefringence, can also be observed by quasi-elastic neutron scattering (QENS). A fastening of the TEG chains dynamics is observed in the case of PTTP and not FS. We therefore assign this transition to the melt of the TEG chains. Overall the TEG chains are promoting dynamical order at room temperature, but if crystallising, may introduce an extra reversible structural transition above room temperature leading to thermal instabilities. Ultimately, a deeper understanding of chain polarity and structural dynamics can help guide new materials design and navigate the intricate balance between electronic charge transport and aqueous swelling that is being sought for a number of emerging organic electronic and bioelectronic applications.

Diodes fabricated using a blend of poly(3-hexylthiophene) and phenyl-C 61 -butyric acid methyl ester (6-80 μm thick) as an organic semiconductor component achieved consistent 4 MeV α particle detection. Current-voltage characteristics and current-time measurements were obtained under α irradiation and in its absence. Steady-state and transient (time-of-flight) photoconduction measurements were additionally performed. Low-bias (<20 V) α particle detection gain-efficiency products of order 10 -2 were measured. The α particle detection was achieved reproducibly, reversibly, and repeatably in different devices of varying organic semiconductor layer thicknesses using both the steady-state and time-dependent (dynamic) diode responses. Conductive gain, due to trapped electrons, increased the α particle gain-efficiency product in both forward and reverse bias conditions as well as increasing steady-state photoconduction. The device thickness was optimized to maximize the gain-efficiency product by matching the penetration depth of the α particle, obtained by modeling, to the organic semiconductor layer thickness. Very high confidence α particle detection was achieved (with signal-to-noise ratios exceeding 20) under optimized device dimensions and drive conditions. Hecht function fitting of the gain-efficiency product versus electric field data returns mobility-lifetime products of order 10 -6 -10 -7 cm 2 V -1 . This work demonstrates that solution-processed organic semiconductor diodes are viable for low-voltage α particle detection.

Organic semiconductors are solution-processable, lightweight and flexible and are increasingly being used as the active layer in a wide range of new technologies. The versatility of synthetic organic chemistry enables the materials to be tuned such that they can be incorporated into biological sensors, wearable electronics, photovoltaics and flexible displays. These devices can be improved by improving their material components, not only by developing the synthetic chemistry but also by improving the analytical and computational techniques that enable us to understand the factors that govern material properties. Judicious molecular design provides control of the semiconductor frontier molecular orbital energy distribution and guides the hierarchical assembly of organic semiconductors into functional films where we can manipulate the properties and motion of charges and excited states. This Review describes how molecular design plays an integral role in developing organic semiconductors for electronic devices in present and emerging technologies., (© 2020. Springer Nature Limited.)

The isomerization of aliphatic amine radical cations via intermediate [cyclopropane-NH 3 ] +• and [cyclopropane-amine] +• ion-neutral complexes was studied experimentally with double-focusing mass spectrometers and computationally with composite ab initio methods. The results examine and extend Audier's suggestion that primary amine radical cations with alkyl substituents at the β- and/or γ-carbon atoms isomerize via transient complexes of NH 3 and alkyl cyclopropanes; these are formed by ring closure of the easily accessible γ-distonic isomers. Ionized amines with substituents at the α-carbon may react analogously when trialkyl cyclopropane complexes can be formed. Isomerization via complex intermediates is a major reaction pathway when the internal energy of the amine radical cation is less than that required for simple CC-bond cleavage. Complexes of unsubstituted or monosubstituted ionized cyclopropanes rarely contribute to the isomerization reactions. Secondary and tertiary amine radical cations do not undergo isomerization via cyclopropane intermediates, whereas aliphatic ether radical cations do.

The exploration of a wide range of molecular structures has led to the development of high-performance conjugated polymer semiconductors for flexible electronic applications including displays, sensors, and logic circuits. Nevertheless, many conjugated polymer field-effect transistors (OFETs) exhibit nonideal device characteristics and device instabilities rendering them unfit for industrial applications. These often do not originate in the material's intrinsic molecular structure, but rather in external trap states caused by chemical impurities or environmental species such as water. Here, a highly efficient mechanism is demonstrated for the removal of water-induced traps that are omnipresent in conjugated polymer devices even when processed in inert environments; the underlying mechanism is shown, by which small-molecular additives with water-binding nitrile groups or alternatively water-solvent azeotropes are capable of removing water-induced traps leading to a significant improvement in OFET performance. It is also shown how certain polymer structures containing strong hydrogen accepting groups will suffer from poor performances due to their high susceptibility to interact with water molecules; this allows the design guidelines for a next generation of stable, high-performing conjugated polymers to be set forth., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Conjugated oligomers of 3,4-ethylenedioxythiophene (EDOT) are attractive materials for tissue engineering applications and as model systems for studying the properties of the widely used polymer poly(3,4-ethylenedioxythiophene). We report here the facile synthesis of a series of keto-acid end-capped oligo-EDOT derivatives (n = 2-7) through a combination of a glyoxylation end-capping strategy and iterative direct arylation chain extension. Importantly, these structures not only represent the longest oligo-EDOTs reported but are also bench stable, in contrast to previous reports on such oligomers. The constructs reported here can undergo subsequent derivatization for integration into higher-order architectures, such as those required for tissue engineering applications. The synthesis of hetero-bifunctional constructs, as well as those containing mixed-monomer units, is also reported, allowing further complexity to be installed in a controlled manner. Finally, we describe the optical and electrochemical properties of these oligomers and demonstrate the importance of the keto-acid in determining their characteristics.

Dalton is a powerful general-purpose program system for the study of molecular electronic structure at the Hartree-Fock, Kohn-Sham, multiconfigurational self-consistent-field, Møller-Plesset, configuration-interaction, and coupled-cluster levels of theory. Apart from the total energy, a wide variety of molecular properties may be calculated using these electronic-structure models. Molecular gradients and Hessians are available for geometry optimizations, molecular dynamics, and vibrational studies, whereas magnetic resonance and optical activity can be studied in a gauge-origin-invariant manner. Frequency-dependent molecular properties can be calculated using linear, quadratic, and cubic response theory. A large number of singlet and triplet perturbation operators are available for the study of one-, two-, and three-photon processes. Environmental effects may be included using various dielectric-medium and quantum-mechanics/molecular-mechanics models. Large molecules may be studied using linear-scaling and massively parallel algorithms. Dalton is distributed at no cost from http://www.daltonprogram.org for a number of UNIX platforms.

We describe herein the first synthesis of a new class of anti-aromatic planar cyclooctatetraenes: the azatrioxa[8]circulenes. This was achieved by treating a suitably functionalised 3,6-dihydroxycarbazole with 1,4-benzoquinones or a 1,4-naphthoquinone. We fully characterised the azatrioxa[8]circulenes by using optical, electrochemical and computational techniques as well as by single-crystal X-ray crystallography. The results of a computational study (NICS) suggest that the central planar cyclooctatetraene is anti-aromatic when the molecules are in neutral or oxidised states (2+), and that the corresponding dianions are aromatic. We discuss the aromatic/anti-aromatic nature of the planar cyclooctatetraenes and compare them with the isoelectronic tetraoxa[8]circulenes., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Recently synthesized π-extended symmetrical tetraoxa[8]circulenes that exhibit electroluminescent properties were calculated at the density functional theory (DFT) level using the quantum theory of atoms in molecules (QTAIM) approach to electron density distribution analysis. Nucleus-independent chemical shift (NICS) indices were used to characterize the aromaticity of the studied molecules. The tetraoxa[8]circulene molecules were found to consist of two antiaromatic perimeters (according to the Hückel "4n" antiaromaticity rule) that include 8 and 24 π-electrons. Conversely, NICS calculations demonstrated the existence of a common π-extended system (distributed like a flat ribbon) in the studied tetraoxa[8]circulene molecules. Thus, these symmetrical tetraoxa[8]circulene molecules provide examples of diatropic systems characterized by the presence of induced diatropic ring currents.

The formation of bound electron-hole pairs, also called charge-transfer (CT) states, in organic-based photovoltaic devices is one of the dominant loss mechanisms hindering performance. Whereas CT state dynamics following electron transfer from donor to acceptor have been widely studied, there is not much known about the dynamics of bound CT states produced by hole transfer from the acceptor to the donor. In this letter, we compare the dynamics of CT states formed in the different charge-transfer pathways in a range of model systems. We show that the nature and dynamics of the generated CT states are similar in the case of electron and hole transfer. However the yield of bound and free charges is observed to be strongly dependent on the HOMOD-HOMOA and LUMOD-LUMOA energy differences of the material system. We propose a qualitative model in which the effects of static disorder and sampling of states during the relaxation determine the probability of accessing CT states favorable for charge separation.

The gas-to-aqueous solution shifts of the 17O and 13C NMR isotropic shielding constants for the carbonyl chromophore in formaldehyde and acetone are investigated. For the condensed-phase problem, we use the hybrid density functional theory/molecular mechanics approach in combination with a statistical averaging over an appropriate number of solute-solvent configurations extracted from classical molecular dynamics simulations. The PBE0 exchange-correlation functional and the 6-311++G(2d,2p) basis set are used for the calculation of the shielding constants. London atomic orbitals are employed to ensure gauge-origin independent results. The effects of the bulk solvent molecules are found to be crucial in order to calculate accurate solvation shifts of the shielding constants. Very good agreement between the computed and experimental solvation shifts is obtained for the shielding constants of acetone when a polarizable water potential is used. Supermolecular results based on geometry-optimized molecular structures are presented. We also compare the results obtained with the polarizable continuum model to the results obtained using explicit MM molecules to model the bulk solvent effect.

A combined quantum mechanics/molecular mechanics (QM/MM) method is described, where the polarization between the solvent and solute is accounted for using a self-consistent scheme linear in the solvent polarization. The QM/MM method is implemented for calculation of energies and molecular response properties including the calculation of linear and quadratic response functions using the density-functional theory (DFT) and the Hartree-Fock (HF) theory. Sample calculations presented for ground-state energies, first-order ground-state properties, excitation energies, first-order excited state properties, polarizabilities, first-hyperpolarizabilities, and two-photon absorptions strengths of formaldehyde suggests that DFT may in some cases be a sufficiently reliable alternative to high-level theory, such as coupled-cluster (CC) theory, in modeling solvent shifts, whereas results obtained with the HF wave function deviate significantly from the CC results. Calculations carried out on water gives results that also are comparable with CC calculations in accuracy for ground-state and first-order properties. However, to obtain such accuracy an exchange-correlation functional capable of describing the diffuse Rydberg states must be chosen.

We present a gauge-origin independent method for the calculation of nuclear magnetic shielding tensors of molecules in a structured and polarizable environment. The method is based on a combination of density functional theory (DFT) or Hartree-Fock wave functions with molecular mechanics. The method is unique in the sense that it includes three important properties that need to be fulfilled in accurate calculations of nuclear magnetic shielding constants: (i) the model includes electron correlation effects, (ii) the model uses gauge-including atomic orbitals to give gauge-origin independent results, and (iii) the effect of the environment is treated self-consistently using a discrete reaction-field methodology. The authors present sample calculations of the isotropic nuclear magnetic shielding constants of liquid water based on a large number of solute-solvent configurations derived from molecular dynamics simulations employing potentials which treat solvent polarization either explicitly or implicitly. For both the (17)O and (1)H isotropic shielding constants the best predicted results compare fairly well with the experimental data, i.e., they reproduce the experimental solvent shifts to within 4 ppm for the (17)O shielding and 1 ppm for the (1)H shielding.

We have studied the basis set and electron correlation effects on the ab initio calculations of two-photon absorption cross sections of water. Various series of correlation consistent basis sets up to triply augmented basis sets of valence pentuple zeta level as well as the popular 6-31G(d) basis set have been employed in combination with several coupled cluster, configuration interaction, and density functional theory methods. We find that it is very difficult to obtain converged values of the cross sections for even a small molecule such as water. Acknowledging these difficulties in obtaining a fully converged cross section for a given state, we also investigated the possibility of determining relative cross sections for a series of organic molecules. However, we did not find consistency between the relative cross sections calculated at the Hartree-Fock level and several coupled-cluster methods using the 6-31G(d) and aug-cc-pVDZ basis sets. However, we could reproduce the relative ordering of the two-photon absorption cross sections of the molecules studied at the Hartree-Fock level.

[reaction: see text] The synthesis and characterization of water-soluble singlet oxygen sensitizers with a phenylene-vinylene motif is presented. The principal motivation for this study was to better understand specific features of a water-soluble molecule that influence the photosensitized production of singlet oxygen upon nonlinear, two-photon excitation of that molecule. To achieve water solubility, sensitizers were synthesized with ionic as well as nonionic substituents. In the ionic approach, salts of N-methylated pyridine, benzothiazole, and 1-methyl-piperazine moieties were used, as were aryl-substituted sulfonic acid moieties. In the nonionic approach, aryl-substituted triethylene glycol moieties were used. Selected photophysical properties of the compounds synthesized were determined, including singlet oxygen quantum yields. Of the molecules examined, the most efficient singlet oxygen sensitizers had triethylene glycol units as the functional group that imparted water solubility. Molecules containing the ionic moieties did not make singlet oxygen in appreciable yield nor did they efficiently fluoresce. Rather, for these latter molecules, rapid charge-transfer-mediated non-radiative processes appear to dominate excited state deactivation.

Host-guest interactions between the periphery of adamantylurea-functionalized dendrimers (host) and ureido acetic acid derivatives (guest) were shown to be specific, strong and spatially well-defined. The binding becomes stronger when using phosphonic or sulfonic acid derivatives. In the present work we have quantified the binding constants for the host-guest interactions between two different host motifs and six different guest molecules. The host molecules, which resemble the periphery of a poly(propylene imine) dendrimer, have been fitted with an anthracene-based fluorescent probe. The two host motifs differ in terms of the length of the spacer between a tertiary amine and two ureido functionalities. The guest molecules all contain an acidic moiety (either a carboxylic acid, a phosphonic acid, or a sulfonic acid) and three of them also contain an ureido moiety capable of forming multiple hydrogen bonds to the hosts. The binding constants for all 12 host-guest complexes have been determined by using fluorescence titrations by monitoring the increase in fluorescence of the host upon protonation by the addition of the guest. The binding constants could be tuned by changing the design of the acidic part of the guest. The formation of hydrogen bonds gives, in all cases, higher association constants, demonstrating that the host is more than a proton sensor. The host with the longer spacer (propyl) shows higher association constants than the host with the shorter spacer (ethyl). The gain in association constants are higher when the urea function is added to the guests for the host with the longer spacer, indicating a better fit. Collision-induced dissociation mass spectrometry (CID-MS) is used to study the stability of the six motifs using the corresponding third generation dendrimer. A similar trend is found when the six different guests are compared.

A technique is described wherein substituent-dependent excited-state properties of gas-phase porphyrins can be accurately quantified. Dissociation lifetimes of photoexcited porphyrin cations were measured in an electrostatic ion storage ring. From these data, upper limits for the triplet quantum yield of the following protonated porphyrins were obtained: protoporphyrin IX (0.63 +/- 0.04), tetraphenylporphyrin (0.73 +/- 0.03), tetra(p-methylphenyl)porphyrin (0.75 +/- 0.03), and tetra(p-cyanophenyl)porphyrin (0.71 +/- 0.03). The values compare well with those for porphyrins in solution.

Singlet molecular oxygen (a(1)Delta(g)) has been produced and optically detected in time-resolved experiments upon nonlinear two-photon excitation of a photosensitizer dissolved in water. For a given sensitizer, specific functional groups that impart water solubility and that give rise to larger two-photon absorption cross sections are, in many cases, not conducive to the production of singlet oxygen in high yield. This issue involves the competing influence of intramolecular charge transfer that can be pronounced in aqueous systems; more charge transfer in the chromophore facilitates two-photon absorption but decreases the singlet oxygen yield. This phenomenon is examined in a series of porphyrins and vinyl benzenes.

We present structural studies of Langmuir (L) and Langmuir-Blodgett (LB) films of new amphiphilic hexa-peri-hexabenzocoronene (HBC) discotics, carrying five branched alkyl side chains and one polar group. The polar group is either a carboxylic acid moiety or an electron acceptor moiety (anthraquinone). Grazing-incidence X-ray diffraction (GIXD) and X-ray reflectivity, both utilizing synchrotron radiation, show that these amphiphilic HBCs form well-defined Langmuir monolayers at the air-water interface, with a pi-stacked columnar structure where the HBC cores are rotated around the surface normal and tilted relative to the water surface. The intercolumnar distance is 20 A. The HBCs are confined to a layer lying on top of the layer of polar groups that are in contact with the water subphase. Efficient transfer of the monolayer of the anthraquinone-substituted HBC derivative to hydrophobic quartz substrates by vertical dipping gave well-defined multilayer Y-type LB films. Polarized optical spectroscopy, GIXD, and X-ray reflectivity measurements show that the LB films consist of at least two phases. Heating the films results in an irreversible rearrangement to a single macroscopically aligned phase of hexagonally packed columns oriented along the dipping direction with disk planes perpendicular to the columnar axes and stacked in a cofacial manner. This phase transition is analogous to the reversible transition observed in the bulk material.