Search

The reliability and power-quality (PQ) expectations of the power distribution system are steadily increasing. Performance-based rates and/or incentives are being put into place in order to ensure that reliability standards are being met. The distribution system planners, designers, and operators are given the task of developing system upgrades that will successfully meet these new performance goals. This is not always an easy or straightforward task, particularly in cases where a system upgrade can impact the various reliability and PQ indices in different directions. This paper develops an incremental cost-based approach to providing linkage between the sustained and momentary interruption indices. This new approach is readily implementable, and also readily adjusted to meet local performance goals. This paper also presents a case study involving a distribution feeder, and assesses the use of the method in evaluating fuse saving/fuse melting and sectionalizing switch automation upgrades on the line. [ABSTRACT FROM PUBLISHER]

Abstract: This is the latest edition of Baker & McKenzie''s column on developments in EU law relating to IP, IT and telecommunications. This article summarises recent developments that are considered important for practitioners, students and academics in a wide range of information technology, e-commerce, telecommunications and intellectual property areas. It cannot be exhaustive but intends to address the important points. This is a hard copy reference guide, but links to outside web sites are included where possible. No responsibility is assumed for the accuracy of information contained in these links. [Copyright &y& Elsevier]

Presents a study on the performance of the Level 1 Calorimeter Trigger which identifies the energy deposits left by particles in the BABAR detector. Requirements of the Level 1 Calorimeter Trigger; Data interfaces and algorithm of the electromagnetic calorimeter trigger; Conclusion.

The coronavirus pandemic has had a major impact on education. As a result of this crisis, instructors world-wide had to quickly adapt and shift to remote teaching. This paper presents and describes technologies (such as Microsoft Teams, Zoom, Virtual Worlds, etc.) to promote active student learning during a pandemic. It also provides general information about the coronavirus and the learning environment that it created., (© 2021 The Author(s). Published by Elsevier B.V.)

Biofilms consist of not only bacteria but also extracellular polymer substrates (EPS). They are groups of microorganisms that adhere to each other on a surface, especially as a result of exposure to water and bacteria. They can pose health risks to humans as they grow in hospital settings that include medical supplies and devices. In a previous study, the researchers discovered that bacteria/biofilm grew well on wetted external latex, male catheters. These results concerned the investigators and encouraged them to find ways for prohibiting the growth of bacteria/biofilm on the male catheters (which are made of natural rubber). They carried out a new study to assess the influence of metals and voltage for the growth of bacteria on these latex samples. For this purpose, a unique Rotation Disk Reactor was used to accelerate biofilm formation on external male catheter samples. This setup included a dip tank containing water and a rotating wheel with the attached latex samples (some of which had single electrodes while others had paired electrodes with applied voltage). The process allowed the samples to become wetted and also exposed them to microorganisms in the ambient air during each revolution of the wheel. The results (as viewed from SEM images) showed that when compared to the control sample, the presence of metals (brass, stainless steel, and silver) was generally effective in preventing bacterial growth. Also the use of voltage (9.5 volt battery) essentially eliminated the appearance of rod shaped bacteria in some of the samples. It can be concluded that the presence of metals significantly reduced bacterial growth on latex and the application of voltage was able to essentially eliminate bacteria, providing appropriate electrode combinations were used.

Mediastinitis is a dreaded complication of CABG surgery. Short-term outcomes have been described, but there have been only a few long-term studies. We examined the survival of patients undergoing isolated CABG surgery between 1992 and 2001. Mediastinitis was identified during the index admission. Proportional hazards regression was used to calculate adjusted hazard ratios (HR) and 95% confidence intervals (CI 95%). Among 36,078 consecutive patients, there were 5749 deaths during 148,319 person years of follow-up. There were 418 cases of mediastinitis (1.16%). The incidence of death was 11.15 per 100 person/years with mediastinitis and 3.81 deaths/100 person years without. (P < 0.001). We also examined the mortality rates of patients who survived at least 6 months after their CABG surgery. Patients with mediastinitis had an incidence rate of 5.70 deaths per 100 person/years while those without had a rate of 2.66 deaths per 100 person/years (P < 0.001). After adjustment for baseline differences in patient and disease characteristics, the hazard ratio was 2.12 (CI95% = 1.86,2.58; P < 0.001). The adjusted hazard ratios for patients who survived 6 months postsurgery was 1.70 (CI95% = 1.36,2.13; P < 0.001). Mediastinitis is associated with a marked increase in both acute and long-term mortality rates.

Objectives: Using a large, current, regional registry of percutaneous coronary interventions (PCI), we identified risk factors for postprocedure vascular complications and developed a scoring system to estimate individual patient risk., Background: A vascular complication (access-site injury requiring treatment or bleeding requiring transfusion) is a potentially avoidable outcome of PCI., Methods: Data were collected on 18,137 consecutive patients undergoing PCI in northern New England from January 1997 to December 1999. Multivariate regression was used to identify characteristics associated with vascular complications and to develop a scoring system to predict risk., Results: The rate of vascular complication was 2.98% (541 cases). Variables associated with increased risk in the multivariate analysis included age >or=70, odds ratio (OR) 2.7, female sex (OR 2.4), body surface area <1.6 m(2) (OR 1.9), history of congestive heart failure (OR 1.4), chronic obstructive pulmonary disease (OR 1.5), renal failure (OR 1.9), lower extremity vascular disease (OR 1.4), bleeding disorder (OR 1.68), emergent priority (OR 2.3), myocardial infarction (OR 1.7), shock (1.86), >or=1 type B2 (OR 1.32) or type C (OR 1.7) lesions, 3-vessel PCI (OR 1.5), use of thienopyridines (OR 1.4) or use of glycoprotein IIb/IIIa receptor inhibitors (OR 1.9). The model performed well in tests for significance, discrimination, and calibration. The scoring system captured 75% of actual vascular complications in its highest quintiles of predicted risk., Conclusion: Predicting the risk of post-PCI vascular complications is feasible. This information may be useful for clinical decision-making and institutional efforts at quality improvement.