Search

In this work, two sets of samples were considered: field samples collected from local waste wood and synthetic samples made by mixing clean wood (including oak, beech, poplar) with typical organic pollutants: creosote, polychlorinated byphenils (PCBs), pentachlorophenol (PCP), cypermethrin, dodecyl dimethyl ammonium chloride (DDAC). Vibrational spectroscopy techniques were tested to detect organic pollutants in wood items. Raman and infrared spectroscopies were showed as fast, non-destructive and non-invasive fingerprint techniques for detection of organic molecules. Associated with principal component analysis, we have shown the evidence of quick detection of and discrimination of polluted wood items by kinds and versus concentration., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A great variety of legume species are used for forage production and grown in multi-species grasslands. Despite their close phylogenetic relationship, they display a broad range of morphologies that markedly affect their competitive abilities and persistence in mixtures. Little is yet known about the component traits that control the deployment of plant architecture in most of these species. During the present study, we compared the patterns of shoot organogenesis and shoot organ growth in contrasting forage species belonging to the four morphogenetic groups previously identified in herbaceous legumes (i.e., stolon-formers, rhizome-formers, crown-formers tolerant to defoliation and crown-formers intolerant to defoliation). To achieve this, three greenhouse experiments were carried out using plant species from each group (namely alfalfa, birdsfoot trefoil, sainfoin, kura clover, red clover, and white clover) which were grown at low density under non-limiting water and soil nutrient availability. The potential morphogenesis of shoots characterized under these conditions showed that all the species shared a number of common morphogenetic features. All complied with a generalized classification of shoot axes into three types (main axis, primary and secondary axes). A common quantitative framework for vegetative growth and development involved: (i) the regular development of all shoot axes in thermal time and a deterministic branching pattern in the absence of stress; (ii) a temporal coordination of organ growth at the phytomer level that was highly conserved irrespective of phytomer position, and (iii) an identical allometry determining the surface area of all the leaves. The species differed in their architecture as a consequence of the values taken by component traits of morphogenesis. Assessing the relationships between the traits studied showed that these species were distinct from each other along two main PCA axes which explained 68% of total variance: the first axis captured a trade-off between maximum leaf size and the ability to produce numerous phytomers, while the second distinguished morphogenetic strategies reliant on either petiole or internode expansion to achieve space colonization. The consequences of this quantitative framework are discussed, along with its possible applications regarding plant phenotyping and modeling.

Interest in the thermal acclimation of photosynthesis has been stimulated by the increasing relevance of climate change. However, little is known about intra-specific variations in thermal acclimation and its potential for breeding. In this article, we examined the difference in thermal acclimation between alfalfa (Medicago sativa) cultivars originating from contrasting origins, and sought to analyze the mechanisms in play. A series of experiments was carried out at seven growth temperatures between 5 and 35 °C using four cultivars from temperate and Mediterranean origin. Leaf traits, the photosynthetic rate at 25 °C (A400 (25)), the photosynthetic rate at optimal temperature (A400 (opt)), the thermal optimum of photosynthesis (Topt), and the photosynthetic parameters from the Farqhuar model were determined. Irrespective of cultivar origin, a clear shift in the temperature responses of photosynthesis was observed as a function of growth temperature, affecting thermal optimum of photosynthesis, photosynthetic rate at optimal temperature and photosynthetic rate at 25 °C. For both cultivars, Topt values increased linearly in leaves grown between 5 and 35 °C. Relative homeostasis of A400 (25) and A400 (opt) was found between 10 °C and 30 °C growth temperatures, but sharp declines were recorded at 5 and 35 °C. This homeostasis was achieved in part through modifications to leaf nitrogen content, which increased at extreme temperatures. Significant changes were also recorded regarding nitrogen partitioning in the photosynthetic apparatus and in the temperature dependence of photosynthetic parameters. The cultivars differed only in terms of the temperature response of photosynthetic parameters, with Mediterranean genotypes displaying a greater sensitivity of the maximum rate of Rubisco carboxylation to elevated temperatures. It was concluded that intra-specific variations in the temperature acclimation of photosynthesis exist among alfalfa cultivars, but that Mediterranean genotypes presented no evidence of superior performance at high temperatures., (Published by Oxford University Press on behalf of the Annals of Botany Company.)

Modelling the spatial and temporal distribution of leaf nitrogen (N) is central to specify photosynthetic parameters and simulate canopy photosynthesis. Leaf photosynthetic parameters depend on both local light availability and whole-plant N status. The interaction between these two levels of integration has generally been modelled by assuming optimal canopy functioning, which is not supported by experiments. During this study, we examined how a set of empirical relationships with measurable parameters could be used instead to predict photosynthesis at the leaf and whole-canopy levels. The distribution of leaf N per unit area (Na) within the canopy was related to leaf light irradiance and to the nitrogen nutrition index (NNI), a whole-plant variable accounting for plant N status. Na was then used to determine the photosynthetic parameters of a leaf gas exchange model. The model was assessed on alfalfa canopies under contrasting N nutrition and with N2-fixing and non-fixing plants. Three experiments were carried out to parameterize the relationships between Na, leaf irradiance, NNI and photosynthetic parameters. An additional independent data set was used for model evaluation. The N distribution model showed that it was able to predict leaf N on the set of leaves tested. The Na at the top of the canopy appeared to be related linearly to the NNI, whereas the coefficient accounting for N allocation remained constant. Photosynthetic parameters were related linearly to Na irrespective of N nutrition and the N acquisition mode. Daily patterns of gas exchange were simulated accurately at the leaf scale. When integrated at the whole-canopy scale, the model predicted that raising N availability above an NNI of 1 did not result in increased net photosynthesis. Overall, the model proposed offered a solution for a dynamic coupling of leaf photosynthesis and canopy N distribution without requiring any optimal functioning hypothesis., (Published by Oxford University Press on behalf of the Annals of Botany Company.)

Linear, alternating polymers of aromatic amines (p-phenylenediamine, bis(p-aminophenyl)amine, and diaminocarbazole) and either m-phenylene or 3,5-pyridine have been synthesized and characterized by electrochemical and spectroscopic means. The presence of radical cations in their electrochemically oxidized forms is manifested by new bands in the UV-vis-NIR spectra whose appearance can be correlated with reversible redox couples registered in the corresponding cyclic voltammograms at approximately the same potentials as well as with pronounced evolutions of their resonance Raman spectra. Detailed analysis of the Raman data gives information about the locations and the distribution of radical cations and spinless dication in the macromolecule. This approach can provide a new insight into the formation of high-spin states in these polymers.

Aim: The aim was to compare osteointegration of nanostructured implants to a microsurface widely used for titanium dental implants., Materials & Methods: Commercial titanium dental implants with smooth or microroughened surfaces were nanostructured. Implants were inserted into the femoral condyles of rabbits. After 2 and 4 weeks, histomorphometry calculation was performed., Results: Nanotubes measuring 60 nm in diameter were observed on both S-NANO (roughness: 0.05 μm) and R-NANO (roughness: 0.40 μm) surfaces. The MICRO surface exhibited typical random cavities (roughness: 2.09 μm). At 4 weeks, bone-to-implant contact values were significantly higher for the R-NANO than for the MICRO surface while no differences were observed at 2 weeks., Conclusion: Overall, this study shows that the nanostructured surfaces improved osteointegration similar or higher than the MICRO.

Titanium and its alloys are commonly used for dental implants because of their good mechanical properties and biocompatibility. The surface properties of titanium implants are key factors for rapid and stable bone tissue integration. Micro-rough surfaces are commonly prepared by grit-blasting and acid-etching. However, proteins and cells interact with implant surfaces in the nanometer range. The aim of this study was to compare the osseointegration of machined (MA), standard alumina grit-blasted and acid-etched (MICRO) and nanostructured (NANO) implants in rabbit femurs. The MICRO surface exhibited typical random cavities with an average roughness of 1.5 μm, while the NANO surface consisted of a regular array of titanium oxide nanotubes 37±11 nm in diameter and 160 nm thick. The MA and NANO surfaces had a similar average roughness of 0.5 μm. The three groups of implants were inserted into the femoral condyles of New Zealand White rabbits. After 4 weeks, the pull-out test gave higher values for the NANO than for the other groups. Histology corroborated a direct apposition of bone tissue on to the NANO surface. Both the bone-to-implant contact and bone growth values were higher for the NANO than for the other implant surfaces. Overall, this study shows that the nanostructured surface improved the osseointegration of titanium implants and may be an alternative to conventional grit-blasted and acid-etched surface treatments., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The pathologies of the skeleton have a significant socioeconomic impact on our population. Although therapies have improved the treatment of osteosarcoma and osteoporosis, their efficacy still remains limited. In this context, we developed a miniaturized 3-D culture model of bone cells on calcium phosphate ceramics. Human bone marrow mesenchymal stem cells (MSCs) were three-dimensionally cultured on particles of biphasic calcium phosphate (BCP, 125-200μm) in osteogenic media. The MSCs seeded on the BCP particles adhered and proliferated, producing abundant collagenous extracellular matrix (ECM). Light and confocal laser scanning microscopy showed that the MSCs created bridges between the BCP particles and formed a 3-D structure. Energy dispersive X-ray analysis in a scanning electron microscope confirmed the mineralization of the collagen matrix. The 96-well sized bone constructs were tested by immunohistology and transcription analysis, proving cell differentiation. Both techniques corroborated the osteoblastic differentiation with high production of bone sialoprotein and osteocalcin. Peripheral blood CD14-positive monocytes (MOs) were pre-differentiated into osteoclasts prior to seeding on the 3-D constructs. Multinucleated and tartrate-resistant acid phosphatase-positive cells were also identified at the surface of the 3-D constructs after 90days of culture. In addition, cell viability within these constructs was measured by flow cytometry. In summary, we have developed a miniaturized 3-D culture of bone cell precursors with osteoblasts and osteoclasts. This 3-D culture may make it possible to test the effects of new drugs for bone healing, osteoporosis and osteosarcomas, in more appropriate cell-cell and cell-matrix interactions than conventional 2-D cultures., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The interaction of human Rad51 protein (HsRad51) with single-stranded deoxyribonucleic acid (ssDNA) was investigated by using quartz crystal microbalance (QCM) monitoring and atomic force microscopy (AFM) visualization. Gold surfaces for QCM and AFM were modified by electrografting of the in situ generated aryldiazonium salt from the sulfanilic acid to obtain the organic layer Au-ArSO3 H. The Au-ArSO3 H layer was activated by using a solution of PCl5 in CH2 Cl2 to give a Au-ArSO2 Cl layer. The modified surface was then used to immobilize long ssDNA molecules. The results obtained showed that the presence of adenosine diphosphate promotes the protein autoassociation rather than nucleation around DNA. In addition, when the BRC4-28 peptide inhibitor was used, both QCM and AFM confirmed the inhibitory effect of BRC4-28 toward HsRad51 autoassociation. Altogether these results show the suitability of this modified surface to investigate the kinetics and structure of DNA-protein interactions and for the screening of inhibitors., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Vibrational dynamics in triarylamine dendrimers was studied in a complementary way by Raman and infrared (IR) spectroscopies and incoherent inelastic neutron scattering (IINS). Three molecules were investigated, namely, unsubstituted triarylamine dendrimer of the first generation and two dendrimers of the first and second generation, substituted in the crown with butyl groups. To facilitate the assignment of the observed IR and Raman modes as well as the IINS peaks, vibrational models, based on the general valence force field method (GVFF), were calculated for all three compounds studied. A perfect consistency between the calculated and experimental results was found. Moreover, an important complementarity of the vibrational spectroscopies and IINS was established for the investigated dendrimers. The IINS peaks originating mainly from the C-H motions were not restricted by particular selection rules and only dependent on the IINS cross section. To the contrary, Raman and IR bands were imposed by the selection rules and the local geometry of the dendrimers yielding mainly C-C and C-N deformation modes with those of C-H nature of much lower intensity. Raman spectroscopy was also applied to the studies of the oxidation of dendrimers to their cationic forms. A strong Raman resonance effect was observed, since the spectra of the studied compounds, registered at different levels of their oxidation, strongly depended on the position of the excitation line with respect to their electronic spectrum. In particular, the blue (458 nm) excitation line turned out to be insensitive toward the cationic forms yielding very limited spectral information. To the contrary, the use of the red (647 nm) and infrared (1064 nm) excitation lines allowed for an unambiguous monitoring of the spectral changes in dendrimers oxidized to nominally monocationic and tricationic states. The analysis of oxidation-induced spectral changes in the tricationic state indicated that the charge storage configuration predominantly involved one spinless dication of the quinoid bond sequence and one radical cation. However, small numbers of dications were also found in a nominally monocationic state, where only radical cations should have been present. This finding was indicative of some inhomogeneity of the oxidation.

In the present work, the standard monometallic localized surface plasmon resonance (LSPR) biosensing sensitivity is highly improved when using a new system based on glass substrates modified with high-temperature annealed gold/silver bimetallic nanoparticles (Au/Ag bimetallic NPs) coated with polydopamine films before biomolecule specific immobilization. Thus, different zones of bimetallic NPs are spatially created onto a glass support thanks to a commercial transmission electron microscopy (TEM) grid marker in combination with two sequential evaporations of continuous films of gold (4 nm) and silver (2 nm) and followed by annealing at 500 °C for 8 h. By using the scanning electron microscopy (SEM), it is found that annealed Au/Ag bimetallic NPs have uniform size and shape distribution that exhibited a sharper well-defined LSPR resonant peak when compared with that of monometallic Au NPs and thereby contributing to an improved sensitivity in LSPR biosensor application. The controlled micropatterns consisting of bimetallic particles are used in the construction of LSPR biochips for high-throughput detection of different concentrations of a model antigen named bovine serum albumin (BSA) on a single glass sample, with a lower limit of detection of 0.01 ng/mL under the optimized conditions.

Background and Aims: The growth of crops in a mixture is more variable and difficult to predict than that in pure stands. Light partitioning and crop leaf area expansion play prominent roles in explaining this variability. However, in many crops commonly grown in mixtures, including the forage species alfalfa, the sensitivity and relative importance of the physiological responses involved in the light modulation of leaf area expansion are still to be established. This study was designed to assess the relative sensitivity of primary shoot development, branching and individual leaf expansion in alfalfa in response to light availability., Methods: Two experiments were carried out. The first studied isolated plants to assess the potential development of different shoot types and growth periods. The second consisted of manipulating the intensity of competition for light using a range of canopies in pure and mixed stands at two densities so as to evaluate the relative effects on shoot development, leaf growth, and plant and shoot demography., Key Results: Shoot development in the absence of light competition was deterministic (constant phyllochrons of 32·5 °Cd and 48·2 °Cd for primary axes and branches, branching probability of 1, constant delay of 1·75 phyllochron before axillary bud burst) and identical irrespective of shoot type and growth/regrowth periods. During light competition experiments, changes in plant development explained most of the plant leaf area variations, with average leaf size contributing to a lesser extent. Branch development and the number of shoots per plant were the leaf area components most affected by light availability. Primary axis development and plant demography were only affected in situations of severe light competition., Conclusions: Plant leaf area components differed with regard to their sensitivity to light competition. The potential shoot development model presented in this study could serve as a framework to integrate light responses in alfalfa crop models.

Seaweed antibacterial polysaccharides were grafted onto poly(vinylchloride) (PVC) surfaces using an original click chemistry pathway. PVC isothiocyanate surfaces (PVC-NCS) were first prepared by nucleophilic substitution of the chloride groups by isothiocyanate groups in DMSO/water medium. Then, unmodified Ulvan, Fucan, Laminarin or Zosterin was directly grafted onto the PVC-NCS surface using 1-ethyl-3-methyl imidazolium phosphate, an ionic liquid, as solvent and catalyst. To attest the grafting effectiveness, the new PVC surfaces were well characterized by AFM, XPS and contact angle measurements., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The present work was focused on the nanomechanical and adhesion properties of the napin (2S albumin) and cruciferin (12S globulin) rapeseed (Brassica napus L.) proteins, respectively, a low and high molecular weight seed protein. Using chemically modified AFM tips, force spectroscopy experiments demonstrated notable differences in the tip-protein interaction strength with regard to the nature of the protein and pH of the aqueous environment. The results clearly underline the role of residence time and electrostatic interactions in the protein-protein adhesion force. Although the nanomechanical experiments concerned more than a single molecule, unfolding length and force characteristics of the rapeseed proteins have been statistically found to be sensitive to the structural properties of the protein. This study provides insight into the characterization of rapeseed proteins and then a better knowledge of their interaction and assembling at the nanoscale range.

So simple: The in situ synthesis of an aryldiazonium salt and an azo-aryldiazonium salt by azo coupling from sulfanilic acid and aniline is reported. Formation of a mixed organic layer is monitored by cyclic voltammetry and atomic force microscopy. A compact mixed layer is obtained with a global roughness of 0.4 nm and 10-15 % vertical extension in the range 1.5-6 nm., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Carbon and chromium surfaces were modified by electrochemical reduction of a diazonium salt formed in situ from the sulfanilic acid. The organic layer formed was activated by phosphorus pentachloride (PCl(5)) to form a benzene sulfonil chloride (Ar-SO(2)Cl). An electrochemical study of the blocking effect and the activity of this surface was carried out on a carbon electrode. The chromium surface study was completed by X-ray photoelectron spectroscopy and atomic force microscopy to characterize the formation of a compact monolayer (0.8 nm height and roughness 0.2-0.3 nm). The compactness and the activity of this organic monolayer allowed us to affix a length dsDNA with the aim of analyzing the formation of a complex between dsDNA and a protein. The interaction of a transposase protein with its target dsDNA was investigated. The direct imaging of the nucleoproteic complex considered herein gives new insights in the comprehension of transposase-DNA interaction in agreement with biochemical data., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The shape that stem cells reach at the end of adhesion process influences their differentiation. Rearrangement of cytoskeleton and modification of intracellular tension may activate mechanotransduction pathways controlling cell commitment. In the present study, the mechanical signals involved in cell adhesion were computed in in vitro stem cells of different shapes using a single cell model, the so-called Cytoskeleton Divided Medium (CDM) model. In the CDM model, the filamentous cytoskeleton and nucleoskeleton networks were represented as a mechanical system of multiple tensile and compressive interactions between the nodes of a divided medium. The results showed that intracellular tonus, focal adhesion forces as well as nuclear deformation increased with cell spreading. The cell model was also implemented to simulate the adhesion process of a cell that spreads on protein-coated substrate by emitting filopodia and creating new distant focal adhesion points. As a result, the cell model predicted cytoskeleton reorganisation and reinforcement during cell spreading. The present model quantitatively computed the evolution of certain elements of mechanotransduction and may be a powerful tool for understanding cell mechanobiology and designing biomaterials with specific surface properties to control cell adhesion and differentiation.

Aims: We aimed to study the interactions between human mesenchymal stem cells and the bone integration of nanostructured titanium implants., Materials & Methods: Nanopores of 20, 30 and 50 nm were prepared by anodization of titanium at 5, 10 and 20 V in a mixture of fluorhydric and acetic acid. Ti 30 and 50 nanostructures promoted early osteoblastic gene differentiation of the human mesenchymal stem cells without osteogenic supplements. The osseointegration of nanostructured and control titanium implants was compared by implantation in rat tibias for 1 and 3 weeks., Results: The nanostructures significantly accelerated bone apposition and bone bonding strength in vivo in correlation with in vitro results., Conclusion: These findings demonstrate that specific nanostructures controlled the differentiation of cells and, thus, the integration of implants in tissues. These nanoporous titanium surfaces may be of considerable interest for dental and orthopedic implants.

Understanding the distribution of gas exchange within a plant is a prerequisite for scaling up from leaves to canopies. We evaluated whether leaf traits were reliable predictors of the effects of leaf ageing and leaf irradiance on leaf photosynthetic capacity (V(cmax) , J(max) ) in field-grown vines (Vitis vinifera L). Simultaneously, we measured gas exchange, leaf mass per area (LMA) and nitrogen content (N(m) ) of leaves at different positions within the canopy and at different phenological stages. Daily mean leaf irradiance cumulated over 10 d (PPFD(10) ) was obtained by 3D modelling of the canopy structure. N(m) decreased over the season in parallel to leaf ageing while LMA was mainly affected by leaf position. PPFD(10) explained 66, 28 and 73% of the variation of LMA, N(m) and nitrogen content per area (N(a) ), respectively. Nitrogen content per unit area (N(a) = LMA × N(m) ) was the best predictor of the intra-canopy variability of leaf photosynthetic capacity. Finally, we developed a classical photosynthesis-stomatal conductance submodel and by introducing N(a) as an input, the model accurately simulated the daily pattern of gas exchange for leaves at different positions in the canopy and at different phenological stages during the season., (© 2012 Blackwell Publishing Ltd.)

Background and Aims: Most studies dealing with light partitioning in intercropping systems have used statistical models based on the turbid medium approach, thus assuming homogeneous canopies. However, these models could not be directly validated although spatial heterogeneities could arise in such canopies. The aim of the present study was to assess the ability of the turbid medium approach to accurately estimate light partitioning within grass-legume mixed canopies., Methods: Three contrasted mixtures of wheat-pea, tall fescue-alfalfa and tall fescue-clover were sown according to various patterns and densities. Three-dimensional plant mock-ups were derived from magnetic digitizations carried out at different stages of development. The benchmarks for light interception efficiency (LIE) estimates were provided by the combination of a light projective model and plant mock-ups, which also provided the inputs of a turbid medium model (SIRASCA), i.e. leaf area index and inclination. SIRASCA was set to gradually account for vertical heterogeneity of the foliage, i.e. the canopy was described as one, two or ten horizontal layers of leaves., Key Results: Mixtures exhibited various and heterogeneous profiles of foliar distribution, leaf inclination and component species height. Nevertheless, most of the LIE was satisfactorily predicted by SIRASCA. Biased estimations were, however, observed for (1) grass species and (2) tall fescue-alfalfa mixtures grown at high density. Most of the discrepancies were due to vertical heterogeneities and were corrected by increasing the vertical description of canopies although, in practice, this would require time-consuming measurements., Conclusions: The turbid medium analogy could be successfully used in a wide range of canopies. However, a more detailed description of the canopy is required for mixtures exhibiting vertical stratifications and inter-/intra-species foliage overlapping. Architectural models remain a relevant tool for studying light partitioning in intercropping systems that exhibit strong vertical heterogeneities. Moreover, these models offer the possibility to integrate the effects of microclimate variations on plant growth.

We report the preparation and characterization of a matrix-free carboxylated surface plasmon resonance (SPR) sensor chip with high sensing efficiency by functionalizing a bare gold thin film with a self-assembled monolayer of 16-mercaptohexadecanoic acid (SAM-MHDA chip). The self assembled monolayer surface coverage of the gold layer was carefully evaluated and the SAM was characterized by infrared reflection absorption spectroscopy, X-ray photoemission spectroscopy, atomic force microscopy, X-ray reflectivity-diffraction, and SPR experiments with bovine serum albumin. We compared the SPR signal obtained on this chip made of a dense monolayer of carboxylic acid groups with commercially available carboxylated sensor chips built on the same gold substrate, a matrix-free C1 chip, and a CM5 chip with a ~100 nm dextran hydrogel matrix (GE Healthcare). Two well-studied interaction types were tested, the binding of a biotinylated antibody (immunoglobulin G) to streptavidin and an antigen-antibody interaction. For both interactions, the well characterized densely functionalized SAM-MHDA chip gave a high signal-to-noise ratio and showed a gain in the availability of immobilized ligands for their partners injected in buffer flow. It thus compared favourably with commercially available sensor chips.

Titanium implants are widely used in orthopaedic and dental surgery. Surface properties play a major role in cell and tissue interactions. The adhesion and differentiation of mesenchymal stem cells were studied as a function of nanostructures. Titanium surfaces with nanopores 30, 150 and 300 nm in diameter were prepared by physical vapour deposition. PCR arrays indicated that the expression of integrins was modulated by the nanopore size. Human Mesenchymal Stem Cells (hMSCs) exhibited more branched cell morphology on Ti30 than on other surfaces. Ti30 and Ti150 induced osteoblastic differentiation while Ti300 had a limited effect. Overall, nanopores of 30 nm may promote early osteoblastic differentiation and, consequently, rapid osseointegration of titanium implants.

Understanding of the interactions between cells and surfaces is essential in the field of tissue engineering and biomaterials. This study aimed to compare the adhesion, proliferation and differentiation of human mesenchymal stem cells (hMSCs), an osteoblast cell line (MC3T3-E1) and gingival fibroblasts (HGF-1) on tissue culture polystyrene (TCPS), glass and titanium (Ti). The average surface roughness was 5, 0.2 and 40×10(-3) μm for TCPS, glass and Ti, respectively. Immunocytochemistry and image analysis made it possible to quantify the number and morphology of adherent cells as well as the density of the focal points. Regardless of the substrate, both hMSCs and osteoblastic cells were mainly branch-shaped. HGF-1 exhibited a significantly higher number of focal points on Ti than on TCPS and glass. Alizarin red quantification indicated that both hMSCs and osteoblastic cells were more differentiated on TCPS than on Ti and glass. The surface properties of substrates, such as roughness, wettability and chemical composition, modulated the behaviour of the cells. Early events, such as cell adhesion, may influence the differentiation of hMSC and consequently tissue healing around implanted biomaterials., (Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Metals such as titanium and alloys are commonly used for manufacturing orthopedic and dental implants because their surface properties provide a biocompatible interface with peri-implant tissues. Strategies for modifying the nature of this interface frequently involve changes to the surface at the nanometer level, thereby affecting protein adsorption, cell-substrate interactions and tissue development. Recent methods to control these biological interactions at the nanometer scale on the surface of implants are reviewed. Future strategies to control peri-implant tissue healing are also discussed.

*In this study, we examined the impact of transient chilling in maize (Zea mays). We investigated the respective roles of the direct effects of stressing temperatures and indirect whorl size-mediated effects on the growth of leaves chilled at various stages of development. *Cell production, individual leaf extension and final leaf size of plants grown in a glasshouse under three temperature regimes (a control and two short chilling transfers) were studied using two genotypes contrasting in terms of their architecture. *The kinetics of all the leaves emerging after the stress were affected, but not all final leaf lengths were affected. No size-mediated propagation of an initial growth reduction was observed, but a size-mediated effect was associated with a longer duration of leaf elongation which compensated for reduced leaf elongation rates when leaves were stressed during their early growth. Both cell division and cell expansion contributed to explaining cold-induced responses at the leaf level. *These results demonstrate that leaf elongation kinetics and final leaf length are under the control of processes at the n - 1 (cell proliferation and expansion) and n + 1 (whorl size signal) scales. Both levels may respond to chilling stress with different time lags, making it possible to buffer short-term responses.

The long-term clinical success of dental implants is related to their early osseointegration. This paper reviews the different steps of the interactions between biological fluids, cells, tissues, and surfaces of implants. Immediately following implantation, implants are in contact with proteins and platelets from blood. The differentiation of mesenchymal stem cells will then condition the peri-implant tissue healing. Direct bone-to-implant contact is desired for a biomechanical anchoring of implants to bone rather than fibrous tissue encapsulation. Surfaces properties such as chemistry and roughness play a determinant role in these biological interactions. Physicochemical features in the nanometer range may ultimately control the adsorption of proteins as well as the adhesion and differentiation of cells. Nanotechnologies are increasingly used for surface modifications of dental implants. Another approach to enhance osseointegration is the application of thin calcium phosphate (CaP) coatings. Bioactive CaP nanocrystals deposited on titanium implants are resorbable and stimulate bone apposition and healing. Future nanometer-controlled surfaces may ultimately direct the nature of peri-implant tissues and improve their clinical success rate.

Maize (Zea mays L.) is a chill-susceptible crop cultivated in northern latitude environments. The detrimental effects of cold on growth and photosynthetic activity have long been established. However, a general overview of how important these processes are with respect to the reduction of productivity reported in the field is still lacking. In this study, a model-assisted approach was used to dissect variations in productivity under suboptimal temperatures and quantify the relative contributions of light interception (PAR c ) and radiation use efficiency (RUE) from emergence to flowering. A combination of architectural and light transfer models was used to calculate light interception in three field experiments with two cold-tolerant lines and at two sowing dates. Model assessment confirmed that the approach was suitable to infer light interception. Biomass production was strongly affected by early sowings. RUE was identified as the main cause of biomass reduction during cold events. Furthermore, PAR c explained most of the variability observed at flowering, its relative contributions being more or less important according to the climate experienced. Cold temperatures resulted in lower PAR c , mainly because final leaf length and width were significantly reduced for all leaves emerging after the first cold occurrence. These results confirm that virtual plants can be useful as fine phenotyping tools. A scheme of action of cold on leaf expansion, light interception and radiation use efficiency is discussed with a view towards helping breeders define relevant selection criteria.

The effect of trophic competition between vegetative sources and reproductive sinks on grapevine (Vitis vinifera L.) shoot development was analyzed. Two international cultivars (Grenache N and Syrah) grown in pots, which were well watered, were studied. A large range of trophic competition levels was obtained by modifying the cluster loads per plant. An analytical breakdown of the branching system was used to analyze the effects of trophic competition. Phytomer production on the primary axis and the probability and timing of axillary budburst were not affected by trophic competition. However, the duration of development and leaf production rate for secondary axes were both significantly affected. The impact of trophic competition differed within the P0-P1-P2 architectural module, locally within the shoot and between cultivars. Trophic competition reduced the organogenesis of secondary axes most strongly close to clusters, on P1-P2 phytomers and in Grenache N. Based on these results, a modeling approach simulating sink strength variation and the local effects of sink proximity would be more relevant than a model considering only development as a function of thermal time or the global distribution of available biomass.

Background and Aims: In grapevine, canopy-structure-related variations in light interception and distribution affect productivity, yield and the quality of the harvested product. A simple statistical model for reconstructing three-dimensional (3D) canopy structures for various cultivar-training system (C x T) pairs has been implemented with special attention paid to balance the time required for model parameterization and accuracy of the representations from organ to stand scales. Such an approach particularly aims at overcoming the weak integration of interplant variability using the usual direct 3D measurement methods., Model: This model is original in combining a turbid-medium-like envelope enclosing the volume occupied by vine shoots with the use of discrete geometric polygons representing leaves randomly located within this volume to represent plant structure. Reconstruction rules were adapted to capture the main determinants of grapevine shoot architecture and their variability. Using a simplified set of parameters, it was possible to describe (1) the 3D path of the main shoot, (2) the volume occupied by the foliage around this path and (3) the orientation of individual leaf surfaces. Model parameterization (estimation of the probability distribution for each parameter) was carried out for eight contrasting C x T pairs., Key Results and Conclusions: The parameter values obtained in each situation were consistent with our knowledge of grapevine architecture. Quantitative assessments for the generated virtual scenes were carried out at the canopy and plant scales. Light interception efficiency and local variations of light transmittance within and between experimental plots were correctly simulated for all canopies studied. The approach predicted these key ecophysiological variables significantly more accurately than the classical complete digitization method with a limited number of plants. In addition, this model accurately reproduced the characteristics of a wide range of individual digitized plants. Simulated leaf area density and the distribution of light interception among leaves were consistent with measurements. However, at the level of individual organs, the model tended to underestimate light interception.

Background and Aims: Plant growth models able to simulate phenotypic plasticity are increasingly required because (1) they should enable better predictions of the observed variations in crop production, yield and quality, and (2) their parameters are expected to have a more robust genetic basis, with possible implications for selection of quantitative traits such as growth- and allocation-related processes. The structure-function plant model, GREENLAB, simulates resource-dependent plasticity of plant architecture. Evidence for its generality has been previously reported, but always for plants grown in a limited range of environments. This paper aims to test the model concept to its limits by using plant spacing as a means to generate a gradient of competition for light, and by using a new crop species, tomato, known to exhibit a strong photomorphogenetic response., Methods: A greenhouse experiment was carried out with three homogeneous planting densities (plant spacing = 0.3, 0.6 and 1 m). Detailed records of plant development, plant architecture and organ growth were made throughout the growing period. Model calibration was performed for each situation using a statistical optimization procedure (multi-fitting)., Key Results and Conclusions: Obvious limitations of the present version of the model appeared to account fully for the plant plasticity induced by inter-plant competition for light. A lack of stability was identified for some model parameters at very high planting density. In particular, those parameters characterizing organ sink strengths and governing light interception proved to be environment-dependent. Remarkably, however, responses of the parameter values concerned were consistent with actual growth measurements and with previously reported results. Furthermore, modifications of total biomass production and of allocation patterns induced by the planting-density treatments were accurately simulated using the sets of optimized parameters. These results demonstrate that the overall model structure is potentially able to reproduce the observed plant plasticity and suggest that sound biologically based adaptations could overcome the present model limitations. Potential options for model improvement are proposed, and the possibility of using the kernel algorithm currently available as a fitting tool to build up more sophisticated model versions is advocated.

Aims: Surface modifications at the nanometric scale may promote protein adsorption, cell adhesion and thus favor the osseointegration of metal implants. The behavior of osteoblastic cells was studied on mirror-polished (Smooth-SS) and nanostructured (Nano-SS) stainless steel surfaces., Materials & Methods: The nanostructuration was obtained by anodization. The surfaces were characterized by scanning electron, atomic force microscopy (AFM) and X-ray photoelectron specytoscopy. Osteoblastic cells were cultured on these surfaces., Results & Discussion: AFM showed a regular array of pores on the Nano-SS. Osteoblastic cells spread more rapidly on Nano-SS surfaces than on Smooth-SS surfaces. Cell viability was similar on Smooth-SS and Nano-SS. Alkaline phosphatase activity increased with culture time whatever the substrate but was better enhanced at 21 days on the Nano-SS than on the Smooth-SS., Conclusion: This study shows that the nanostructuration of metal implants may improve the adhesion and differentiation of osteoblastic cells.

This paper deals with different methods for the manufacturing of near-field optical probes with nanometric aperture. After the wet chemical etching of the fiber, two metallization processes are compared: the well-known thermal evaporation versus the novel arrangement of plasma sputtering. Further, it is reported an original controlled nano-indentation in the smooth softness surface to produce the apex aperture of the tapered fiber. These apertures present thin protrusions, but they show good optical and topographic resolutions. Besides, the probe sensitivity is discussed with respect to the multi- and single-mode of the primary optical fiber for imaging sub-wavelength dimension objects in the collection mode.

Background and Aims: Plant architecture and its interaction with agronomic practices and environmental constraints are determinants of the structure of the canopy, which is involved in carbon acquisition and fruit quality development. A framework for the quantitative analysis of grapevine (Vitis vinifera) shoot architecture, based on a set of topological and geometrical parameters, was developed for the identification of differences between cultivars and the origins of phenotypic variability., Methods: Two commercial cultivars ('Grenache N', 'Syrah') with different shoot architectures were grown in pots, in well-irrigated conditions. Shoot topology was analysed, using a hidden semi-Markov chain and variable-order Markov chains to identify deviations from the normal pattern of succession of phytomer types (P0-P1-P2), together with kinematic analysis of shoot axis development. Shoot geometry was characterized by final internode and individual leaf area measurements., Key Results: Shoot architecture differed significantly between cultivars. Secondary leaf area and axis length were greater for 'Syrah'. Secondary leaf area distribution along the main axis also differed between cultivars, with secondary leaves preferentially located towards the basal part of the shoot in 'Syrah'. The main factors leading to differences in leaf area between the cultivars were: (a) slight differences in main shoot structure, with the supplementary P0 phytomer on the lower part of the shoot in 'Grenache N', which bears a short branch; and (b) an higher rate and duration of development of branches bearing by P1-P2 phytomers related to P0 ones at the bottom of the shoot in 'Syrah'. Differences in axis length were accounted for principally by differences in individual internode morphology, with 'Syrah' having significantly longer internodes. This trait, together with a smaller shoot diameter, may account for the characteristic 'droopy' habit of 'Syrah' shoots., Conclusions: This study highlights the architectural parameters involved in the phenotypic variability of shoot architecture in two grapevine cultivars. Differences in primary shoot structure and in branch development potential accounted for the main differences in leaf area distribution between the two cultivars. By contrast, shoot shape seemed to be controlled by differences in axis length due principally to differences in internode length.

Background and Aims: Soil water deficit is a major abiotic stress with severe consequences for the development, productivity and quality of crops. However, it is considered a positive factor in grapevine management (Vitis vinifera), as it has been shown to increase grape quality. The effects of soil water deficit on organogenesis, morphogenesis and gas exchange in the shoot were investigated., Methods: Shoot organogenesis was analysed by distinguishing between the various steps in the development of the main axis and branches. Several experiments were carried out in pots, placed in a greenhouse or outside, in southern France. Soil water deficits of various intensities were imposed during vegetative development of the shoots of two cultivars ('Syrah' and 'Grenache N')., Key Results: All developmental processes were inhibited by soil water deficit, in an intensity-dependent manner, and sensitivity to water stress was process-dependent. Quantitative relationships with soil water were established for all processes. No difference was observed between the two cultivars for any criterion. The number of leaves on branches was particularly sensitive to soil water deficit, which rapidly and strongly reduced the rate of leaf appearance on developing branches. This response was not related to carbon availability, photosynthetic activity or the soluble sugar content of young expanding leaves. The potential number of branches was not a limiting factor for shoot development., Conclusions: The particularly high sensitivity to soil water deficit of leaf appearance on branches indicates that this process is a major determinant of the adaptation of plant leaf area to soil water deficit. The origin of this particular developmental response to soil water deficit is unclear, but it seems to be related to constitutive characteristics of branches rather than to competition for assimilates between axes differing in sink strength.

The structural defects formed along the polymer chain during the electrochemical intercalation of sodium into polyparaphenylene (PPP) were investigated by in situ FT Raman measurements with an excitation wavelength of 1064 nm. Our Raman data are compared with those obtained for PPP and its oligomers intercalated with Na(+) ions by chemical ways. The coexistence of polarons and bipolarons is observed in the early stages of the intercalation process. When the doping level increases polarons are transformed to bipolarons, then in the highly intercalated sample (corresponding to a composition close to Na(0.5)(C(6)H(4))), bipolarons are the main structural defects. This evolution, which is reversible, is in accordance with the electron spin resonance (ESR) data of PPP intercalated with sodium ions in the same experimental conditions.

The oxidation of electrochemically grown poly(indole-5-carboxylic-acid) (P5CO2H) and its spectroscopic properties have been studied by in-situ spectroelectrochemical techniques. The purpose of this paper is to characterize the different modifications on the P5CO2H backbone, induced by the electrochemical oxidation in aqueous acidic solution. We have identified, on the basis of Raman spectra, the vibrational modes associated with neutral and oxidized segments of polymer. It was shown that at least three chemically and optically different species (perhaps other products too) are produced in different potential regimes upon oxidation of this polymer. The results obtained also indicate that the molecular properties of this conducting polymer are better revealed by in-situ resonant spectra than by ex-situ infrared and Raman studies.

Spectroelectrochemical properties of conducting poly(5-cyanoindole) films deposited on indium tin oxide (ITO) and platinum electrodes are investigated using UV-vis and resonant Raman spectroscopies. The transitions from undoped to semi-conducting state of P5CN require the partial oxidation of the polymer to create radical-cations by insertion of charge-neutralizing anions into the polymer. In order to obtain detailed structural information from the vibrational spectra, it is necessary to know the vibrational modes of oxidation-sensitive bands. Vibrational assignments were made on the basis of the results obtained on polyindole and P5CN in acetonitrile solution. The drastic changes in optical absorption and Raman spectra observed at various stage of oxidation were explained by the conversions between at least three different structures. On the basis of the Raman spectra, we have identified the vibrational modes associated with neutral and polaronic segments. The perturbation associated with the coexistence of these polaronic segments has been described as a quinoid structure growing on the expense of the benzoid one. The results obtained indicate that the molecular properties of the conducting polymers at various stages of an oxidation are better revealed by in-situ Raman spectra than by ex-situ studies.