Search

Two-dimensional materials composed of all-oriented branches assembled with active Ag nanospecies might be attractive in the microbial inhibition application because of improved Ag ion release behavior and interaction with targeted substance. Herein, we report an excellent Ag-AlNiO nanocomposite antimicrobial materials by Ni-doping AlOOH triggering better implanting of Ag nanospecies. The TEM results revealed that the formed nanoflower-like configuration of the Ni-doping AlOOH favors the formation of refined active silver nanospecies (diameter of 6–10 nm) compared to Ni-free AlOOH (Ag-AlO). The resulting Ag-AlNiO afford good biocompatibility which is evidenced by the cell viability test via cell counting kit-8 (CCK-8) assay. More importantly, Ag-AlNiO showed promotive broad-spectrum antimicrobial properties against various gram-negative bacteria, gram-positive bacteria, and fungi. We also demonstrated that corresponding MIC values against different microbes ranging from 16 to 128 μg/mL concerning Ag-AlNiO composite were at least 2-, or 4-folds lower than Ag-AlO composite. Besides, the optimal Ag-AlNiO is endowed with excellent antimicrobial effect against H37Rv , Bacillus Calmette-Guerin (BCG), and multidrug-resistant (MDR) strain of Mycobacterium tuberculosis. In comparison with Ag-AlO, Ag-AlNiO revealed a prolonged inhibitory effect on microbial growth, which indicated that abundant silver nanospecies were sustained released from the nanoflower-like Ag-AlNiO composites in addition to the direct attacks. [Display omitted] • Nano-Ag species functionalized AlOOH composites were constructed with and without nickel-doping (Ag-AlNiO and Ag-AlO). • Nickel-doping improved the efficient assembly of silver nanoparticles on nanoflower-like AlOOH compared to Ni-free AlOOH. • Ag-AlNiO composites had superior and long-term antimicrobial effects against varied microbes. • Ag-AlNiO composites could better kill multidrug-resistant (MDR) strain of Mycobacterium tuberculosis compared with Ag-AlO. • The direct attack microbials and the sustained silver release of Ag-AlNiO composites have been proven the probable antibacterial mechanisms. [ABSTRACT FROM AUTHOR]

The additional cost of Hg0 capture in coal-fired power plants has facilitated the demand for environmental pollutants mitigation material for Hg0 oxidation to Hg2+ for an ultra-low Hg emission technology. Herein, a suite of CeO 2 -based catalysts were investigated aiming at ultra-low gaseous Hg0 emission at coal-fired power stations. Gaseous elemental mercury is feasible to be catalytically oxidized to Hg2+. The co-regulated dispersion, exposure and defect sites on CeO 2 (111) surface with 2 wt% Ce and 8 wt% Mo compositions on γ-Al 2 O 3 was found to be the most promising catalyst demonstrating a high catalytic oxidation efficiency, a broad operating temperature range and a low activation energy. Specifically, it is shown that the oxidation of Hg0 on the Ce-based catalysts can be enhanced by the addition of Mo (up to 8 wt%) via promoting the CeO 2 (111) surface dispersion and exposure. Moreover, insights into the Ce and Mo synergistic interactions showed that it facilitated the formation of defect-containing surface sites. Besides, the co-regulation of dispersion, exposure and defect sites on CeO 2 (111) surface was further studied by DFT calculations. This study provides a feasible approach in optimization of CeO 2 -based catalysts for catalytic oxidation of Hg0 to achieve efficient removal of environmental pollutants. [Display omitted] • The Mo additive had a promotional effect on surface Ce crystal dispersion. • The exposure of CeO 2 (111) surface was contributed by Mo doping. • The presence of CeO 2 (111) defective sites was cross-validated. • Co-regulated dispersion, exposure and defect sites on CeO 2 surface was found. • Ce and Mo synergistic interactions enhanced Hg0 emission control. [ABSTRACT FROM AUTHOR]

● A flexible strategy was designed for converting algae residues into N-doping graphene-like biochar. ● The MBCM displayed superior performance for continuously separating multiphase emulsion mixtures. ● MBCM/AOPs system was efficiently used for simultaneously degrading SOCs. ● DFT confirmed the pyridine N at graphene-like edge was the intrinsic active site of the activation of PS. In this study, we applied a flexible strategy to manufacture a microalgal biochar-based membrane (MBCM). Due to the hierarchical surface topography on a micro-nano scale, the MBCM was found to have both underwater superoleophobic and underoil superhydrophobic properties. Combining an underoil superhydrophobic oil-containing region (OCR) with an underwater superoleophobic water-containing region (WCR) achieved the successive filtration of multiphase emulsions. The MBCM also served as a high-performance carbocatalyst for advanced oxidation processes (AOPs), due to the N functionalities (5.08%) of the graphene-like structure. This was caused by the high-temperature pyrolysis of rich proteins and alkaline salts in the algal residue. As a result, the MBCM/AOPs system achieved greater than 99.5% emulsions separation efficiency in different emulsion mixtures, while also achieving an outstanding degradation rate (99.8%) of soluble organic contaminants (SOCs). This in-depth exploration resulted in a low-cost and green strategy for developing multifunctional membranes to treat complex wastewater. The paper explains the mechanisms used by MBCM to synchronously remove emulsions and SOCs from wastewater. [Display omitted] [ABSTRACT FROM AUTHOR]

Biochar, produced as a by-product of pyrolysis/gasification of waste biomass, shows great potential to reduce the environment impact, address the climate change issue, and establish a circular economy model. Despite the promising outlook, the research on the benefits of biochar remains highly debated. This has been attributed to the heterogeneity of biochar itself, with its inherent physical, chemical and biological properties highly influenced by production variables such as feedstock types and treating conditions. Hence, to enable meaningful comparison of results, establishment of an agreed international standard to govern the production of biochar for specific uses is necessary. In this study, we analyzed four key uses of biochar: 1) in agriculture and horticulture, 2) as construction material, 3) as activated carbon, and 4) in anaerobic digestion. Then the guidelines for the properties of biochar, especially for the concentrations of toxic heavy metals, for its environmental friendly application were proposed in the context of Singapore. The international status of the biochar industry code of practice, feedback from Singapore local industry and government agencies, as well as future perspectives for the biochar industry were explained. Unlabelled Image • Waste to biochar is a sustainable partway to circular economy. • Four key uses of the Singapore biochar industry are analyzed and reviewed. • The code of practice for biochar application in Singapore is proposed. • Future perspective of the research, innovation and development for biochar industry is discussed. [ABSTRACT FROM AUTHOR]

Hexafluoropropylene oxide trimer acid (HFPO-TA), an alternative to perfluorooctanoic acid, has been shown to have estrogenic effects. However, its potential to disrupt fish sex differentiation during gonadal development remains unknown. Therefore, this study exposed zebrafish to HFPO-TA from approximately 2 hours post fertilization (hpf) to 60 days post fertilization (dpf) to investigate its effects on sex differentiation. Results indicated that HFPO-TA disrupted steroid hormone homeostasis, delayed gonadal development in both sexes, and resulted in a female-skewed sex ratio in zebrafish. HFPO-TA exposure up-regulated gene expressions of cyp19a1a, esr1, vtg1 and foxl2, while down-regulated those of amh, sox9a and dmrt1. These suggested that HFPO-TA dysregulated the expressions of key genes related to sex differentiation of zebrafish, promoted the production and activation of estrogen, and further induced the feminization. Interestingly, we observed promoter hypomethylation of cyp19a1a and promoter hypermethylation of amh in male zebrafish, which were negatively associated with their gene expressions. These suggested that HFPO-TA dysregulated these key genes through DNA methylation in their promoters. Therefore, the HFPO-TA disrupted the sex differentiation of zebrafish through an epigenetic mechanism involving DNA methylation, ultimately skewing the sex ratio towards females. Overall, this study demonstrated adverse effects of HFPO-TA on fish sex differentiation and provided novel insights into the underlying epigenetic mechanism., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This review focuses on the recent advances in the sustainable conversion of biowaste to valuable carbonaceous materials. This study summarizes the significant progress in biowaste-derived carbon materials (BCMs) via a plasma hybrid system. This includes systematic studies like AI-based multi-coupling systems, promising synthesis strategies from an economic point of view, and their potential applications towards energy, environment, and biomedicine. Plasma modified BCM has a new transition lattice phase and exhibits high resilience, while fabrication and formation mechanisms of BCMs are reviewed in plasma hybrid system. A unique 2D structure can be designed and formulated from the biowaste with fascinating physicochemical properties like high surface area, unique defect sites, and excellent conductivity. The structure of BCMs offers various activated sites for element doping and it shows satisfactory adsorption capability, and dynamic performance in the field of electrochemistry. In recent years, many studies have been reported on the biowaste conversion into valuable materials for various applications. Synthesis methods are an indispensable factor that directly affects the structure and properties of BCMs. Therefore, it is imperative to review the facile synthesis methods and the mechanisms behind the formation of BCMs derived from the low-temperature plasma hybrid system, which is the necessity to obtain BCMs having desirable structure and properties by choosing a suitable synthesis process. Advanced carbon-neutral materials could be widely synthesized as catalysts for application in environmental remediation, energy conversion and storage, and biotechnology., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Metal artifacts due to spinal implants may affect the accuracy of dose calculation for radiotherapy. However, the dosimetric impact of metal artifact reduction (MAR) for spinal implants in stereotactic body radiotherapy (SBRT) plans has not been well studied. The objective of this study was to evaluate the dosimetric impact of MAR in spinal SBRT planning with three clinically common dose calculation algorithms., Methods: Gammex phantom and 10 patients' computed tomography (CT) images were studied to investigate the effects of titanium implants. A commercial orthopedic MAR algorithm was employed to reduce artifacts. Dose calculations for SBRT were conducted on both artifact-corrected and uncorrected images using three commercial algorithms [analytical anisotropic algorithm (AAA), Acuros XB (AXB), and Monte Carlo (MC)]. Dose discrepancies between artifact-corrected and uncorrected cases were appraised using a dose-volume histogram (DVH) and 3-dimensional (3D) gamma analysis with different distance to agreement (DTA) and dose difference criteria. The gamma agreement index (GAI) was denoted as G(∆D, DTA). Statistical analysis of t -test was utilized to evaluate the dose differences of different algorithms., Results: The phantom study demonstrated that titanium metal artifacts can be effectively reduced. The patient cases study showed that dose differences between the artifact-corrected and uncorrected datasets were small evaluated by gamma index and DVH. Gamma analysis found that even the strict criterion local G(1,1) had average values ≥93.9% for the three algorithms. For all DVH metrics, average differences did not exceed 0.7% in planning target volume (PTV) and 2.1% in planning risk volume of spinal cord (PRV-SC). Statistical analysis showed that the observed dose differences of MC method were significantly larger than those of AAA (P<0.01 for D98% of PTV and P<0.001 for D0.1cc of spinal cord) and AXB methods (P<0.001 for D98% and P<0.0001 for D0.1cc)., Conclusions: Dosimetric impact of artifacts caused by titanium implants is not significant in spinal SBRT planning, which indicates that dose calculation algorithms might not be very sensitive to CT number variation caused by titanium inserts., Competing Interests: Conflicts of Interest: All authors have completed the ICMJE uniform disclosure form (available at https://qims.amegroups.com/article/view/10.21037/qims-23-442/coif). The authors have no conflicts of interest to declare., (2023 Quantitative Imaging in Medicine and Surgery. All rights reserved.)

Replication protein A (RPA) is the major single-stranded DNA (ssDNA) binding protein that is essential for DNA replication and processing of DNA double-strand breaks (DSBs) by homology-directed repair pathways. Recently, small molecule inhibitors have been developed targeting the RPA70 subunit and preventing RPA interactions with ssDNA and various DNA repair proteins. The rationale of this development is the potential utility of such compounds as cancer therapeutics, owing to their ability to inhibit DNA replication that sustains tumor growth. Among these compounds, (1Z)-1-[(2-hydroxyanilino) methylidene] naphthalen-2-one (HAMNO) has been more extensively studied and its efficacy against tumor growth was shown to arise from the associated DNA replication stress. Here, we study the effects of HAMNO on cells exposed to ionizing radiation (IR), focusing on the effects on the DNA damage response and the processing of DSBs and explore its potential as a radiosensitizer. We show that HAMNO by itself slows down the progression of cells through the cell cycle by dramatically decreasing DNA synthesis. Notably, HAMNO also attenuates the progression of G2-phase cells into mitosis by a mechanism that remains to be elucidated. Furthermore, HAMNO increases the fraction of chromatin-bound RPA in S-phase but not in G2-phase cells and suppresses DSB repair by homologous recombination. Despite these marked effects on the cell cycle and the DNA damage response, radiosensitization could neither be detected in exponentially growing cultures, nor in cultures enriched in G2-phase cells. Our results complement existing data on RPA inhibitors, specifically HAMNO, and suggest that their antitumor activity by replication stress induction may not extend to radiosensitization. However, it may render cells more vulnerable to other forms of DNA damaging agents through synthetically lethal interactions, which requires further investigation.

The study on the extraction conditions, purification, and biological activity of slash pine (Pinus elliottii.) is important for the development of slash pine resources. The optimal process conditions for the extraction of slash pine polysaccharide (SPP) were determined, resulting in a liquid-solid ratio of 66.94 mL/g, extraction temperature of 83.74 °C and extraction time of 2.56 h by using the response surface methodology, and the yield of SPP was 5.99% under the optimized conditions. Following the purification of SPP, the SPP-2 component was obtained and its physicochemical properties, functional group composition, antioxidant capacity, and moisturizing capacity were determined. Structural analysis suggested that SPP-2 has a molecular weight of 118.407 kDa, and was composed of rhamnose, arabinose, fucose, xylose, mannose, glucose, and galactose in a ratio of 5.98: 14.34: 1: 1.75: 13.50: 3.43: 15.79. The antioxidant activity analysis showed that SPP-2 has good free radical scavenging activity, and it was also found to have in vitro moisturizing activity and low irritation. These results suggest that SPP-2 has the potential for applications in the pharmaceutical, food, and cosmetic industries., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Converting biomass into biochar (BC) as a functional biocatalyst to accelerate persulfate activation for water remediation has attracted much attention. However, due to the complex structure of BC and the difficulty in identifying the intrinsic active sites, it is essential to understand the link between various properties of BC and the corresponding mechanisms promoting nonradicals. Machine learning (ML) recently demonstrated significant potential for material design and property enhancement to help tackle this problem. Herein, ML techniques were applied to guide the rational design of BC for the targeted acceleration of nonradical pathways. The results showed a high specific surface area, and O% values can significantly enhance nonradical contribution. Furthermore, the two features can be regulated by simultaneously tuning the temperatures and biomass precursors for efficient directed nonradical degradation. Finally, two nonradical-enhanced BCs with different active sites were prepared based on the ML results. This work serves as a proof of concept for applying ML in the synthesis of tailored BC for persulfate activation, thereby revealing the remarkable capability of ML for accelerating bio-based catalyst development.

The current transition to sustainability and the circular economy can be viewed as a socio-technical response to environmental impacts and the need to enhance the overall performance of the linear production and consumption paradigm. The concept of biowaste refineries as a feasible alternative to petroleum refineries has gained popularity. Biowaste has become an important raw material source for developing bioproducts and biofuels. Therefore, effective environmental biowaste management systems for the production of bioproducts and biofuels are crucial and can be employed as pillars of a circular economy. Bioplastics, typically plastics manufactured from bio-based polymers, stand to contribute to more sustainable commercial plastic life cycles as part of a circular economy in which virgin polymers are made from renewable or recycled raw materials. Various frameworks and strategies are utilized to model and illustrate additional patterns in fossil fuel and bioplastic feedstock prices for various governments' long-term policies. This review paper highlights the harmful impacts of fossil-based plastic on the environment and human health, as well as the mass need for eco-friendly alternatives such as biodegradable bioplastics. Utilizing new types of bioplastics derived from renewable resources (e.g., biowastes, agricultural wastes, or microalgae) and choosing the appropriate end-of-life option (e.g., anaerobic digestion) may be the right direction to ensure the sustainability of bioplastic production. Clear regulation and financial incentives are still required to scale from niche polymers to large-scale bioplastic market applications with a truly sustainable impact., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

Objective: Blood pressure (BP) control rates among adult patients taking antihypertensive medications in the United States have not improved over the last decade. Many CKD adults require more than one class of antihypertensive agent to reach the BP target recommended by the guidelines. However, no study has quantified the proportion of adult CKD patients taking antihypertensive medication who are on monotherapy or combination therapy., Methods: National Health and Nutrition Examination Survey data during 2001-2018 was used, including adults with CKD taking antihypertensive medication (age ≥ 20 years, n = 4,453). BP control rates were investigated under the BP targets recommended by the 2021 KDIGO, the 2012 KDIGO, and the 2017 ACC/AHA guidelines., Results: The percentages of uncontrolled BP among US adults with CKD taking antihypertensive medication were 81.4% in 2001-2006 and 78.2% in 2013-2018. The proportion of monotherapy of antihypertensive regimen were 38.6, 33.3, and 34.6% from 2001 to 2006, 2007-2012, and 2013-2018, with no obvious difference. Similarly, there was no significant change in percentages of dual-therapy, triple-therapy, and quadruple-therapy. Although proportion of CKD adults not treated with ACEi/ARB decreased from 43.5% in 2001-2006 to 32.7% in 2013-2018, treatment of ACEi/ARB among patients with ACR > 300 mg/g had no significant change., Conclusion: The BP control rates among US adult CKD patients taking antihypertensive medications have not improved from 2001 to 2018. Mono-therapy accounted for about one third of adult CKD patients taking antihypertensive medication and not changed. Increasing antihypertensive medication combination therapy may help improve BP control in CKD adults in the United States., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Li, Sun, Wu, Zhang and Zhao.)

We conceptualize bioresource upgrade for sustainable energy, environment, and biomedicine with a focus on circular economy, sustainability, and carbon neutrality using high availability and low utilization biomass (HALUB). We acme energy-efficient technologies for sustainable energy and material recovery and applications. The technologies of thermochemical conversion (TC), biochemical conversion (BC), electrochemical conversion (EC), and photochemical conversion (PTC) are summarized for HALUB. Microalgal biomass could contribute to a biofuel HHV of 35.72 MJ Kg -1 and total benefit of 749 $/ton biomass via TC. Specific surface area of biochar reached 3000 m 2  g -1 via pyrolytic carbonization of waste bean dregs. Lignocellulosic biomass can be effectively converted into bio-stimulants and biofertilizers via BC with a high conversion efficiency of more than 90%. Besides, lignocellulosic biomass can contribute to a current density of 672 mA m -2 via EC. Bioresource can be 100% selectively synthesized via electrocatalysis through EC and PTC. Machine learning, techno-economic analysis, and life cycle analysis are essential to various upgrading approaches of HALUB. Sustainable biomaterials, sustainable living materials and technologies for biomedical and multifunctional applications like nano-catalysis, microfluidic and micro/nanomotors beyond are also highlighted. New techniques and systems for the complete conversion and utilization of HALUB for new energy and materials are further discussed., (© 2023. The Author(s).)

Due to global urbanization, industrialization, and economic development, biowastes generation represents negative consequences on the environment and human health. The use of generated biowastes as a feedstock for biodegradable bioplastic production has opened a new avenue for environmental sustainability from the circular (bio)economy standpoint. Biodegradable bioplastic production can contribute to the sustainability pillars (environmental, economic, and social). Furthermore, bioenergy, biomass, and biopolymers production after recycling of biodegradable bioplastic can help to maintain the energy-environment balance. Several types of biodegradable bioplastic, such as starch-based, polyhydroxyalkanoates, polylactic acid, and polybutylene adipate terephthalate, can achieve this aim. In this review, an overview of the main biowastes valorization routes and the main biodegradable bioplastic types of production, application, and biodegradability are discussed to achieve the transition to the circular economy. Additionally, end-of-life scenarios (up-cycle and down-cycle) are reviewed to attain the maximum environmental, social, and economic benefit from biodegradable bioplastic products under biorefinery concept., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Improving well-being is a critical problem for worldwide social progress. Research on well-being effects of clean household energy consumption is of great significance for the realization of United Nation's Sustainable Development Goals (SDGs). Due to the multifaceted role of clean household energy in enhancing well-being as a sustainable development goal, it has attracted extensive academic attention and research but still needs to be further refined through new perspectives. This paper uses data from the 2018 China Health and Retirement Longitudinal Study to conduct an empirical analysis of clean household energy consumption and residents' well-being using an ordered probit model, the instrumental variables method, a conditional mixed process (CMP) method, and a mechanism analysis model. The results show that (1) household clean energy consumption contributes to residents' well-being, and the results remained significant after selecting "Do you have an electric Bicycle?" as an instrumental variable to address the endogeneity question. (2) According to heterogeneity research, women's wellbeing is impacted by clean energy consumption in the household more than men's. Only in rural locations can clean household energy consumption significantly boost well-being; urban and suburban areas are unaffected. (3) In the mechanism analysis, health condition and depression played a mediating role on the impact of clean household energy consumption on well-being, and social contact played a moderating role on the impact of clean household energy consumption on well-being. The findings and policy recommendations in this paper are suggestive of how we can improve the well-being of residents in low- and middle-income countries and provide reference values for research in related fields around the world.

The impact of energy consumption on health has become a widely debated topic around the world. However, much of the current research on this topic lacks a theoretical basis. As a result, this paper employs both theoretical and empirical analysis to investigate the impact of household clean energy consumption on residents' health. First, based on the theories of health economics and energy economics, this paper believes that the usage of clean energy can improve the health of residents. Then, the sample for this study is comprised of data from the 2018 China Health and Retirement Longitudinal Study, and the Order Probit Model is applied for the empirical analysis. The outcomes of basic regression, robustness testing, and the treatment of endogenous factors reveal that the usage of clean energy has greatly benefited the health of residents. Furthermore, the heterogeneity analysis shows that long-term use of clean energy greatly improved the health of non-religious people and had a more pronounced impact on the health of women and low-income residents. In addition, the mechanistic analysis indicates that subjective happiness and air quality played a partial mediating role in the impact of cleaner energy consumption on health. Finally, cleaner household energy reduced the prevalence of hypertension, hyperlipidemia, lung disease, asthma, and depression. The conclusion of this paper supports the view of some existing literature, and several policy recommendations are made based on the research findings., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Li, Liang, Chandio, Zang and Duan.)

Due to the difficulty in sampling of metastatic tumors, patient selection is commonly based on results of primary tumor samples when metastatic samples are not available. However, due to tumor heterogeneity, metastatic tumors may be different from primary tumors in their phenotypes. The aim of this study was to investigate the expression of EGFR, HER2, and HER3 between primary and lymph node metastatic lesions of colorectal cancer. Paired primary tumors and lymph node metastases from 79 patients with colorectal cancer were retrospectively collected and analyzed for EGFR, HER2, and HER3 expression. High EGFR, HER2, and HER3 expression (2+ and 3+) was found in 64.2%, 66.0%, and 85.0% of primary tumors, and 56.8%, 46.0%, and 76.0% of lymph node metastases, respectively. Correlation rates between primary and metastatic lesions were 67.1%, 63.3%, and 74.7% for EGFR, HER2, and HER3, respectively. Stage IV tumors (with distant metastasis) had higher correlation rates of HER2 expression compared to stage III tumors (without distant metastasis) (P = 0.050). Moderate correlation rates in EGFR, HER2, and HER3 expression were observed between primary and metastatic lesions of colorectal cancer. Tumor stage or existence of distant metastasis could serve as potential predictive markers for the correlation of HER2 expression between primary tumors and lymph node metastases of colorectal cancer., (© 2022. The Author(s).)

The current view of the involvement of PI3-kinases in checkpoint responses after DNA damage is that ATM is the key regulator of G 1 -, S- or G 2 -phase checkpoints, that ATR is only partly involved in the regulation of S- and G 2 -phase checkpoints and that DNA-PKcs is not involved in checkpoint regulation. However, further analysis of the contributions of these kinases to checkpoint responses in cells exposed to ionizing radiation (IR) recently uncovered striking integrations and interplays among ATM, ATR and DNA-PKcs that adapt not only to the phase of the cell cycle in which cells are irradiated, but also to the load of DNA double-strand breaks (DSBs), presumably to optimize their processing. Specifically, we found that low IR doses in G 2 -phase cells activate a G 2 -checkpoint that is regulated by epistatically coupled ATM and ATR. Thus, inhibition of either kinase suppresses almost fully its activation. At high IR doses, the epistatic ATM/ATR coupling relaxes, yielding to a cooperative regulation. Thus, single-kinase inhibition suppresses partly, and only combined inhibition suppresses fully G 2 -checkpoint activation. Interestingly, DNA-PKcs integrates with ATM/ATR in G 2 -checkpoint control, but functions in its recovery in a dose-independent manner. Strikingly, irradiation during S-phase activates, independently of dose, an exclusively ATR-dependent G 2 checkpoint. Here, ATM couples with DNA-PKcs to regulate checkpoint recovery. In the present work, we extend these studies and investigate organization and functions of these PI3-kinases in the activation of the G 1 checkpoint in cells irradiated either in the G 0 or G 1 phase. We report that ATM is the sole regulator of the G 1 checkpoint after exposure to low IR doses. At high IR doses, ATM remains dominant, but contributions from ATR also become detectable and are associated with limited ATM/ATR-dependent end resection at DSBs. Under these conditions, only combined ATM + ATR inhibition fully abrogates checkpoint and resection. Contributions of DNA-PKcs and CHK2 to the regulation of the G 1 checkpoint are not obvious in these experiments and may be masked by the endpoint employed for checkpoint analysis and perturbations in normal progression through the cell cycle of cells exposed to DNA-PKcs inhibitors. The results broaden our understanding of organization throughout the cell cycle and adaptation with increasing IR dose of the ATM/ATR/DNA-PKcs module to regulate checkpoint responses. They emphasize notable similarities and distinct differences between G 1 -, G 2 - and S-phase checkpoint regulation that may guide DSB processing decisions.

The cell cycle-dependent engagement of DNA-end resection at DSBs is regulated by phosphorylation of CTIP by CDKs, the central regulators of cell cycle transitions. Cell cycle transitions are also intimately regulated by protein degradation via two E3 ubiquitin ligases: SCF SKP2 and APC/C CDH1 complex. Although APC/C CDH1 regulates CTIP in G 1 - and G 2 -phase, contributions by SCF SKP2 have not been reported. We demonstrate that SCF SKP2 is a strong positive regulator of resection. Knockdown of SKP2, fully suppresses resection in several cell lines. Notably, this suppression is G 2 -phase specific and is not observed in S-phase or G 1 -phase cells. Knockdown of SKP2 inactivates SCF SKP2 causing APC/C CDH1 activation, which degrades CTIP. The stabilizing function of SCF SKP2 on CTIP promotes resection and supports gene conversion (GC), alternative end joining (alt-EJ) and cell survival. We propose that CDKs and SCF SKP2 -APC/C CDH1 cooperate to regulate resection and repair pathway choice at DSBs in G 2 -phase.

Cisplatin is a commonly used chemotherapeutic drug for cancer treatment, but its nephrotoxicity may lead to the deterioration of renal function. Previous work has been focused on cisplatin-induced acute kidney disease, whereas the mechanism of chronic kidney disease after cisplatin chemotherapy is largely unknown. In the present study, we have characterized the mouse model of chronic kidney defects induced by repeated low-dose cisplatin treatment. We have also established a relevant cell culture model. In the animal model, C57 mice were given weekly injection of 8 mg/kg cisplatin for 4 wk. This led to a sustained decline of kidney function. These mice showed loss of kidney mass, interstitial fibrosis, continued activation of inflammatory cytokines, and appearance of atubular glomeruli. In the cell model, the BUMPT mouse proximal tubular cell line was treated four times with 1-2 μM cisplatin, resulting in low levels of apoptosis and the expression of fibrosis proteins and profibrotic factors. These data suggest that repeated treatment with low-dose cisplatin causes long-term renal pathologies with characteristics of chronic kidney disease.

This two-part study firstly investigated Tetraselmis suecica grown in different CO 2 (0.04-15%v/v) concentration through indoor and outdoor cultivation systems. A high CO 2 concentration led to a high lipid content, and low nitrogen and oxygen content, which are desirable for transport fuel production. Pyrolysis characteristics were investigated by TG-IR and synchrotron IR microscopy. The results show Tetraselmis suecica grown in 10%CO 2 had the highest decomposition rate corresponding to more volatile products produced during the main thermal cracking stage and derived from protein-and lipid-corresponding functional groups. Moreover, a high reaction temperature and CO 2 concentration resulted in a low retention of surface functional groups. The nitrogen functional groups initially decomposed at a temperature range of 250-300°C and still remained at 550°C, while the lipid-corresponding functional groups completely disappeared at a temperature range of 400-500°C. Besides, the decomposition of chemical components followed the order of carbohydrate, protein and lipid., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Charged up: Three-dimensional architectures constructed from graphene/MoS2 nanoflake arrays have been successfully fabricated by a one-step hydrothermal method. MoS2 nanoflakes with thicknesses less than 13 nm grow vertically on both sides of graphene sheets (see figure), which allows the architectures to be more stable during charging and discharging. Even at a high current density of 8000 mA g(-1), their discharge capacity is still up to 516 mA h g(-1)., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Distinct one-dimensional (1D) oxide nanowires decorating the step edges of a stepped Pd(1 1 9) surface are formed by partial and complete oxidation of a 1D Mn-Pd alloy. Under full postoxidation treatment at 470-570 K, 1D MnO(2) nanowires coupled pseudomorphically to the Pd steps are obtained. Oxidized nanowires, which maintain the basic structural pattern of the 1D Mn-Pd alloy, are instead prepared by exposure of the Mn-Pd alloy to O(2) at 90 K and subsequent short heating to 400 K. A relatively weak Mn-O bonding characterizes these oxidized alloy wires, which are readily reduced by reaction with CO at moderate temperature (350 K). The here reported system emphasizes the influence of kinetic constraints in the formation of oxide nanostructures.