Search

The first demonstration of narrowband spectral filtering of multimode light on a 3D integrated photonic chip using photonic lanterns and waveguide Bragg gratings is reported. The photonic lanterns with multi-notch waveguide Bragg gratings were fabricated using the femtosecond direct-write technique in boro-aluminosilicate glass (Corning, Eagle 2000). Transmission dips of up to 5 dB were measured in both photonic lanterns and reference single-mode waveguides with 10.4-mm-long gratings. The result demonstrates efficient and symmetrical performance of each of the gratings in the photonic lantern. Such devices will be beneficial to space-division multiplexed communication systems as well as for units for astronomical instrumentation for suppression of the atmospheric telluric emission from OH lines. [ABSTRACT FROM AUTHOR]

First identified in 2009 as the site with the lowest precipitable water vapour (PWV) and best terahertz transmission on Earth, “Ridge A” is located approximately 150 km south of Dome A, Antarctica. We use three years of data from the Microwave Humidity Sensor (MHS) on the NOAA-18 satellite and recent ground-based measurements from Ridge A to probe the PWV variations and stability over the high Antarctic plateau. [ABSTRACT FROM PUBLISHER]

One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever-increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming extremely large telescope (ELT) generation of telescopes currently under construction. We demonstrate the fabrication and characterization of a hybridized photonic interferometer, with eight simultaneous inputs, forming 28 baselines, which is the largest amount to date, to the best of our knowledge. Using different photonic fabrication technologies, we combine a 3D pupil remapper with a planar eight-port ABCD pairwise beam combiner, along with the injection optics necessary for telescope use, into a single integrated monolithic device. We successfully realized a combined device called Dragonfly, which demonstrates a raw instrumental closure-phase stability down to 0.9° over $8\pi$ phase piston error, relating to a detection contrast of ${\sim}6.5 \times {10^{- 4}}$ on an adaptive-optics-corrected 8 m telescope. This prototype successfully demonstrates advanced hybridization and packaging techniques necessary for on-sky use for high-contrast detection at small inner working angles, ideally complementing what can currently be achieved using coronagraphs.

Characterisation of exoplanets is key to understanding their formation, composition and potential for life. Nulling interferometry, combined with extreme adaptive optics, is among the most promising techniques to advance this goal. We present an integrated-optic nuller whose design is directly scalable to future science-ready interferometric nullers: the Guided-Light Interferometric Nulling Technology, deployed at the Subaru Telescope. It combines four beams and delivers spatial and spectral information. We demonstrate the capability of the instrument, achieving a null depth better than 10 -3 with a precision of 10 -4 for all baselines, in laboratory conditions with simulated seeing applied. On sky, the instrument delivered angular diameter measurements of stars that were 2.5 times smaller than the diffraction limit of the telescope. These successes pave the way for future design enhancements: scaling to more baselines, improved photonic component and handling low-order atmospheric aberration within the instrument, all of which will contribute to enhance sensitivity and precision.