Search

A diagnostics of infectious diseases can be done by the immunologic methods or by the amplification of nucleic acid specific to contagious agent using polymerase chain reaction. However, in transmissible spongiform encephalopathies, the infectious agent, prion protein (PrP(Sc)), has the same sequence of nucleic acids as a naturally occurring protein. The other issue with the diagnosing based on the PrP(Sc) detection is that the pathological form of prion protein is abundant only at late stages of the disease in a brain. Therefore, the diagnostics of prion protein caused diseases represent a sort of challenges as that hosts can incubate infectious prion proteins for many months or even years. Therefore, new in vivo assays for detection of prion proteins and for diagnosis of their relation to neurodegenerative diseases are summarized. Their applicability and future prospects in this field are discussed with particular aim at using quantum dots as fluorescent labels.

Electrochemical detection of quantum dots (QDs) has already been used in numerous applications. However, QDs have not been well characterized using voltammetry, with respect to their characterization and quantification. Therefore, the main aim was to characterize CdTe QDs using cyclic and differential pulse voltammetry. The obtained peaks were identified and the detection limit (3 S/N) was estimated down to 100 fg/mL. Based on the convincing results, a new method for how to study stability and quantify the dots was suggested. Thus, the approach was further utilized for the testing of QDs stability.

Sarcosine is currently one of the most discussed markers of prostate cancer. It is involved in amino acid metabolism and methylation processes that occur during the progression of prostate cancer. In this study, we monitored the effect of the addition of sarcosine (0; 10; 250; 500; 1,000 and 1,500 µM) in a time-dependent manner (0-72 h) on the PC-3 prostate cancer cell line. For the assessment of cell viability, the commonly used MTT test was employed. Furthermore, ion-exchange liquid chromatography was used for the determination of sarcosine content in the PC-3 cells. We also determined metallothionein (MT) levels by chip capillary electrophoresis and Brdicka reaction in the cells treated with sarcosine. Sarcosine levels in the cells increased in a concentration-dependent manner levels increased from only 270 nM with the lowest applied concentration of sarcosine (10 µM) to 106 µM with the highest applied concentration of sarcosine (1,500 µM). There was a marginal change observed in the MT concentration. Finally, the antioxidant activity of the PC-3 cells was determined using five different spectrophotometric methods [2,2-diphenyl-1-picrylhydrazyl (DPPH), ferric reducing ability of plasma (FRAP), free radicals, N,N-dimethyl-p-phenylenediamine (DMPD) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (ABTS)]. A significant negative correlation was observed between DPPH and FRAP (r=-0.68 at p<0.001) and between DMPD and ABST (r=-0.64 at p<0.001). Additionally, as regards the correlation between MT and DPPH, a significant positive trend (r=0.62 at p<0.001) was observed.

Rapid and sensitive detection is a key step in the effective and early response to the global hazard of various viral diseases. In this study, an integrated isolation of hepatitis B virus (HBV)-specific DNA fragment by magnetic nanoparticles (MNPs) and its immediate analysis by microchip CGE was performed. Microfluidic CE chip was used to accommodate the complete process of viral DNA isolation by MNPs including hybridization and thermal denaturation followed by CE separation. Beforehand, calibration curves of HBV fragments were constructed. For isolation by MNPs, specific streptavidin-biotin interaction was used to bind complementary HBV fragment to magnetic particles. After analysis of isolated HBV by regular MNPs method, innovative approach was performed. The commercial CE chip (Bio-rad) was successfully used to execute HBV fragment isolation. Detection using LIF with detection limit of 1 ng/mL was accomplished., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This review provides a brief overview of the variety of carriers employed for targeted drug delivery used in cancer therapy and summarizes advantages and disadvantages of each approach. Particularly, the attention was paid to polymeric nanocarriers, liposomes, micelles, polyethylene glycol, poly(lactic-co-glycolic acid), dendrimers, gold and magnetic nanoparticles, quantum dots, silica nanoparticles, and carbon nanotubes. Further, this paper briefly focuses on several anticancer agents (paclitaxel, docetaxel, camptothecin, doxorubicin, daunorubicin, cisplatin, curcumin, and geldanamycin) and on the influence of their combination with nanoparticulate transporters to their properties such as cytotoxicity, short life time and/or solubility.

Cisplatin, carboplatin, and oxaliplatin represent three generations of platinum based drugs applied successfully for cancer treatment. As a consequence of the employment of platinum based cytostatics in the cancer treatment, it became necessary to study the mechanism of their action. Current accepted opinion is the formation of Pt-DNA adducts, but the mechanism of their formation is still unclear. Nanomaterials, as a progressively developing branch, can offer a tool for studying the interactions of these drugs with DNA. In this study, fluorescent CdTe quantum dots (QDs, λem = 525 nm) were employed to investigate the interactions of platinum cytostatics (cisplatin, carboplatin, and oxaliplatin) with DNA fragment (500 bp, c = 25 μg/mL). Primarily, the fluorescent behavior of QDs in the presence of platinum cytostatics was monitored and major differences in the interaction of QDs with tested drugs were observed. It was found that the presence of carboplatin (c = 0.25 mg/mL) had no significant influence on QDs fluorescence; however cisplatin and oxaliplatin quenched the fluorescence significantly (average decrease of 20%) at the same concentration. Subsequently, the amount of platinum incorporated in DNA was determined by QDs fluorescence quenching. Best results were reached using oxaliplatin (9.4% quenching). Linear trend (R(2) = 0.9811) was observed for DNA platinated by three different concentrations of oxaliplatin (0.250, 0.125, and 0.063 mg/mL). Correlation with differential pulse voltammetric measurements provided linear trend (R(2) = 0.9511). As a conclusion, especially in the case of oxaliplatin-DNA adducts, the quenching was the most significant compared to cisplatin and nonquenching carboplatin., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The template-based methods belong to low-cost and rapid preparation techniques for various nanostructures like nanowires, nanotubes, and nanodots or even quantum dots [QDs]. The nanostructured surfaces with QDs are very promising in the application as a sensor array, also called 'fluorescence array detector.' In particular, this new sensing approach is suitable for the detection of various biomolecules (DNA, proteins) in vitro (in clinical diagnostics) as well as for in vivo imaging.The paper deals with the fabrication of TiO2 planar nanostructures (QDs) by the process of titanium anodic oxidation through an alumina nanoporous template on a silicon substrate. Scanning electron microscopy observation showed that the average diameter of TiO2 QDs is less than 10 nm. Raman spectroscopic characterization of self-organized titania QDs confirmed the presence of an anatase phase after annealing at 400°C in vacuum. Such heat-treated TiO2 QDs revealed a broad emission peak in the visible range (characterized by fluorescence spectroscopy).

The first aim of this study was to fabricate vertically aligned multiwalled carbon nanotubes (MWCNTs). MWCNTs were successfully prepared by using plasma enhanced chemical vapour deposition. Further, three carbon composite electrodes with different content of carbon particles with various shapes and sizes were prepared and tested on measuring of nucleic acids. The dependences of adenine peak height on the concentration of nucleic acid sample were measured. Carbon composite electrode prepared from a mixture of glassy and spherical carbon powder and MWCNTs had the highest sensitivity to nucleic acids. Other interesting result is the fact that we were able to distinguish signals for all bases using this electrode.

Easy, efficient and low demanding separation of mRNA from biological material is needed to study gene expression and to use in chip technologies. It is common knowledge that each mRNA molecule contains sequence of 25 adenines. This feature can be used for binding mRNA on the surface of the particles coated by thymine chains. The present work reports on suggesting and optimizing of mRNA separation and detection from biological material via paramagnetic microparticles coupled with electrochemical detection. Primarily we optimized cyclic and square wave voltammetric conditions to detect poly(A), which was used as standard to mimic behaviour of mRNA. Under the optimized square wave voltammetric conditions (frequency 280 Hz, accumulation time 200 s, supporting electrolyte and its temperature: acetate buffer 4.6 and 35 degrees C) we estimated detection limit down to 1 ng of poly(A) per ml. To enhance effectiveness and repeatability of isolation of nucleic acid automated approach for rinsing and hybridizing was proposed. We optimized the whole procedure and experimental conditions. Using automated way of isolation and under optimized conditions the yield of poly(A) (isolated concentration of poly(A)/given concentration of poly(A)*100) was approximately 75%. The suggested and optimized method for poly(A) isolation and detection was utilized for the analysis of brain tissues of patients with traumatic brain injury. The total amount of isolated mRNA varied from 40 to 760 g of mRNA per g of brain tissue. The isolation of mRNA from six samples per run was not longer than 2.5h. Moreover, we applied the optimized procedure on fully automated pipetting instrument to isolate mRNA. The instrument was successfully tested on the analysis of extracts from roots of maize plants treated with cadmium(II) ions.