Search

A new thermophilic non-induced lipase producer named Serratia rubidaea strain Nehal-mou was isolated from oil waste in Tissemsilat, Algeria. The most influential lipase production parameters were screened by the Plackett-Burman design for enhancing enzyme yield. An optimum condition of a 1.5% of glucose, a 0.01% of potassium, and a 0.025% of manganese contents resulted in a 41.13 U/mL. This yield was 6.29 times higher than the one achieved before the application of the Box-Behnken Design. Lipase activity showed a high organic solvent tolerance following its exposure to hexane, ethanol, methanol, and acetone. Lipase was also perfectly stable in the presence of 10 mM Fe 2+ , K + , and Na + ions with more than 75% of the retaining activity. The enzyme half-life times were 22 h, 90 min, and 25 min at 50, 60, and 70 °C respectively. Polyvinyl alcohol (PVA)/boric acid/Starch/CaCO 3 were utilized as a carrier for lipase covalent immobilization in order to be used efficiently. The Scanning Electron Microscopy (SEM) Technique and the Fourier Transform Infrared Spectroscopy (FTIR) Method confirmed the covalent bonding success and the excellent carrier characteristics. Thus, the immobilization yield reached 73.5% and the optimum temperature was shifted from 40 to 65 °C. The immobilized lipase kept 80% of its total activity after 10 cycles and had 3 and 3.2-fold half-lives at 70, and 80 °C respectively compared to the free enzyme.

A synthetic cDNA-AmyA gene was cloned and successfully expressed in Pichia pastoris as a His-tagged enzyme under the methanol inducible AOX1 promoter. High level of extracellular amylase production of 72 U/mL was obtained after a 72 h induction by methanol. As expected, the recombinant strain produced only the AmyA isoform since the host is a protease deficient strain. Besides, the purified r-AmyA showed a molecular mass of 54 kDa, the same pH optimum equal to 5.6 but a higher thermoactivity of 60 °C against 50 °C for the native enzyme. Unlike AmyA which maintained 50% of its activity after a 10-min incubation at 60 °C, r-AmyA reached 45 min. The higher thermoactivity and thermostability could be related to the N-glycosylation. The r-AmyA activity was enhanced by 46% and 45% respectively in the presence of 4 mM Fe 2+ and Mg 2+ ions. This enzyme was more efficient in bread-making since such ions were reported to have a positive impact on the nutriment quality and the rheological characteristics of the wheat flour dough. The thermoactivity/thermostability as well as the iron and magnesium activations could also be ascribed to the presence of an additional C-terminal loop containing the His tag.

Agave americana extract was analyzed by reverse phase HPLC for characterization. Among phenolic compounds identified, apigenin was observed to be present. The finding showed an inhibitory effect of apigenin towards Human and Aspergillus oryzae S2 α-amylases. Apigenin inhibition towards Human and A. oryzae α-amylase activities was observed to be competitive. IC50 and  % inhibition of apigenin for A. oryzae α-amylase were 3.98 and 1.65 fold higher than for Human α-amylase. The inhibition of the described biocatalyst activity was significantly lowered when apigenin was pre-incubated with starch. In addition to the catalytic residues, 44 amino acid residues were involved on A. oryzae α-amylase-apigenin interactions while only 11 amino acid residues were exposed for Human α-amylase-apigenin complex. The binding site of apigenin showed 76 polar contacts for A. oryzae S2 α-amylase against 44 interactions for Human α-amylase. The docking studies confirmed the mode of action of apigenin and strongly suggested a higher inhibitory activity towards fungal amylase which was experimentally exhibited. These findings provided a rational reason to establish apigenin capability as a therapeutic target for postprandial hyperglycaemia modulation and antifungal therapy., Competing Interests: Compliance with ethical standardsNone declared.This article does not contain any studies with Human participants or animals performed by any of the authors.

A novel extracellular protease called MPDZ was purified and characterized from Pseudomonas fluorescens strain TBS09. The enzymatic properties of MPDZ were investigated using biochemical and biophysical methods. Matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF/MS) analysis revealed that it was a monomer with a molecular mass of 50013.17Da. The NH 2 -terminal 27 amino acid sequence of MPDZ showed high homology with those of Pseudomonas-proteases of the serralysin family. MPDZ showed optimal activity at pH 7 and 60°C. It was totally inhibited by EGTA, EDTA, and 1,10-phenanthroline, suggesting its belonging to the metalloprotease family. Because of the interesting properties, the mpDZ gene encoding MPDZ was cloned, sequenced, and expressed in E. coli. The deduced amino acid sequence showed a strong homology with other Pseudomonas-metalloproteases. The highest sequence identity value (97%) was obtained with AprX from P. fluorescens strain CY091, with only 12 different amino acid residues. The physico-chemical properties of the extracellular purified recombinant enzyme (rMPDZ) were similar to those of MPDZ. Overall, MPDZ is bestowed with a number of promising biochemical properties that might give new opportunities for its biocatalytic applications. These data constitute an essential first step towards an understanding of the properties of MPDZ enzyme., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A simplex-centroid experimental design was used for the optimization of both reducing and oxidizing improvers, namely Aspergillus oryzae S2 α-amylase (Amy), ascorbic acid (Asc), and glucose oxidase (GOD). This optimization was performed to enhance the dough and breadmaking qualities of soft French wheat flour and a composite counterpart that contained 30% Ukrainian wheat flour. Statistically significant correlations were calculated between the W index and textural parameters (e.g., dough chewiness and bread cohesiveness). The findings revealed that while the best mixture for French flour comprised 21.8% of Amy, 41.2% of Asc, and 37% of GOD, for the composite counterpart, it comprised 2.3% of Amy, 66% of Asc, and 31.7% of GOD. These optimized mixtures rearranged soft French wheat flour and its composite counterpart to a good quality and an improved flour texture, respectively. Additionally, they increased the loaf specific volumes of the breads made from soft French wheat flour and its counterpart by 25.8 and 45.43%, respectively, significantly decreased the breads' susceptibility to microbial contamination, and reclassified the breads as "good" in terms of sensory attributes.

The use of the cyclodextrin glucanotransferase (CGTase) of the US132 strain, which is an effective anti-staling agent, has been hampered by its high cyclization activity. Since that random mutagenesis using error-prone PCR is nowadays a method of choice for enzymes engineering, we have optimized this method by adjusting manganese concentration in order to obtain a high percentage of active CGTase mutants. Therefore, the amplification of the gene encoding the US132 CGTase was performed using a MnCl2 concentration ranging between 0 and 0.5 mM. The finding showed that a manganese concentration of 0.04 mM allowed for 90 % of active mutants. A simple method to rapidly screen the obtained mutants was also developed. After the examination of a small library (of less than 1000 clones), the active mutant named MJ13 was selected for a significant decrease in the cyclization activity, thereby showing a remarkable change in the enzyme specificity towards starch dextrinizing. Sequence analysis showed that MJ13 is a triple mutant with two mutations in the catalytic domain (K47E and S382P) and one substitution in the starch binding domain (N655S).

Use of 4 agro-industrial by products and organic materials as nitrogen sources for production of Aspergillus oryzae S2 α-amylase in liquid culture was investigated. The 2 agro-industrial byproducts maltose and saccharose, and also lactose and starch were individually evaluated for use as carbon sources. A Box-Behnken experimental design was used to determine optimal conditions for production of α-amylase. A maximum amylase activity of 750 U/mL was obtained at a temperature of 24°C, a urea concentration of 1 g/L, and a C/N ratio of 2. Laboratory scale application of optimal conditions in a 7 L fermentor produced a final α-amylase activity of 770 U/mL after 3 days of batch cultivation. Addition of 10% starch to the culture medium each 12 h immediately after the stationary phase of cell growth led to a production yield of 1,220 U/mL at the end of fed-batch cultivation.

Streptomyces sp. strain AH4 exhibited a high ability to produce two extracellular proteases when cultured on a yeast malt-extract (ISP2)-casein-based medium. Pure proteins were obtained after heat treatment (30 min at 70 °C) and ammonium sulphate fractionation (30-60 %), followed by size exclusion HPLC column. Matrix assisted laser desorption ionization-time of flight mass spectrometry analysis revealed that the purified enzymes (named SAPS-P1 and SAPS-P2) were monomers with molecular masses of 36,417.13 and 21,099.10 Da, respectively. Their identified N-terminal amino acid displayed high homologies with those of Streptomyces proteases. While SAPS-P1 was optimally active at pH 12.0 and 70 °C, SAPS-P2 showed optimum activity at pH 10.0 and 60 °C. Both enzymes were completely stable within a wide range of temperature (45-75 °C) and pH (8.0-11.5). They were noted to be completely inhibited by phenylmethanesulfonyl fluoride and diisopropyl fluorophosphates, which confirmed their belonging to the serine proteases family. Compared to SAPS-P2, SAPS-P1 showed high thermostability and excellent stability towards bleaching, denaturing, and oxidizing agents. Both enzymes displayed marked stability and compatibility with a wide range of commercial laundry detergents and significant catalytic efficiencies compared to Subtilisin Carlsberg and Protease SG-XIV. Overall, the results indicated that SAPS-P1 and SAPS-P2 can be considered as potential promising candidates for future application as bioadditives in detergent formulations.

The overexpression of the native gene encoding the thermostable Bacillus subtilis US417 phytase using Pichia pastoris system is described. The phytase gene, in which the sequence encoding the signal peptide was replaced by that of the α-factor of Saccharomyces cerevisiae, was placed under the control of the methanol-inducible promoter of the alcohol oxidase 1 gene and expressed in Pichia pastoris. Small-scale expression experiments and activity assays were used to screen positive colonies. A recombinant strain was selected and produces 43 and 227 U/mL of phytase activity in shake flasks and in high-cell-density fermentation, respectively. The purified phytase was glycosylated protein and varied in size (50-65 kDa). It has a molecular mass of 43 kDa when it was deglycosylated. The purified r-PHY maintains 100% of its activity after 10 min incubation at 75 °C and pH 7.5. This thermostable phytase, which is also active over broad pH ranges, may be useful as feed additives, since it can resist the temperature used in the feed-pelleting process.

The role of residue 219 in the physicochemical properties of D-glucose isomerase from Streptomyces sp. SK strain (SKGI) was investigated by site-directed mutagenesis and structural studies. Mutants G219A, G219N, and G219F were generated and characterized. Comparative studies of their physicochemical properties with those of the wild-type enzyme highlighted that mutant G219A displayed increased specific activity and thermal stability compared to that of the wild-type enzyme, while for G219N and G219F, these properties were considerably decreased. A double mutant, SKGI F53L/G219A, displayed a higher optimal temperature and a higher catalytic efficiency than both the G219A mutant and the wild-type enzyme and showed a half-life time of about 150 min at 85 °C as compared to 50 min for wild-type SKGI. Crystal structures of SKGI wild-type and G219A enzymes were solved to 1.73 and 2.15 Å, respectively, and showed that the polypeptide chain folds into two structural domains. The larger domain consists of a (β/α)8 unit, and the smaller domain forms a loop of α helices. Detailed analyses of the three-dimensional structures highlighted minor but important changes in the active site region as compared to that of the wild-type enzyme leading to a displacement of both metal ions, and in particular that in site M2. The structural analyses moreover revealed how the substitution of G219 by an alanine plays a crucial role in improving the thermostability of the mutant enzyme.

The role of two amino acid residues linked to the two catalytic histidines His54 and His220 in kinetics and physicochemical properties of the Streptomyces sp. SK glucose isomerase (SKGI) was investigated by site-directed mutagenesis and molecular modeling. Two single mutations, F53L and G219D, and a double mutation F53L/G219D was introduced into the xylA SKGI gene. The F53L mutation increases the thermostability and the catalytic efficiency and also slightly shifts the optimum pH from 6.5 to 7, but displays a profile being similar to that of the wild-type enzyme concerning the effect of various metal ions. The G219D mutant is resistant to calcium inhibition retaining about 80% of its residual activity in 10 mM Ca²⁺ instead of 10% for the wild-type. This variant is activated by Mn²⁺ ions, but not Co²⁺, as seen for the wild-type enzyme. It does not require the latter for its thermostability, but has its half-life time displaced from 50 to 20 min at 85°C. The double mutation F53L/G219D restores the thermostability as seen for the wild-type enzyme while maintaining the resistance to the calcium inhibition. Molecular modeling suggests that the increase in thermostability is due to new hydrophobic interactions stabilizing α2 helix and that the resistance to calcium inhibition is a result of narrowing the binding site of catalytic ion.

The sapB gene encoding for Bacillus pumilus CBS protease (SAPB) and the triple mutated sapB-L31I/T33S/N99Y gene were cloned and overexpressed in the protease-deficient Bacillus subtilis DB430 using an Escherichia coli-Bacillus shuttle vector pBSMuL2. The 34,625.13 and 34,675.11-Da enzymes were purified from the culture supernatant of B. subtilis expressing the wild-type and mutated genes, respectively. The purified proteases showed the same N-terminal sequences and biochemical properties of those expressed in E. coli. Further investigations demonstrated that, compared to wild-type and other proteases, SAPB-L31I/T33S/N99Y had the highest catalytic efficiency and the best degree of hydrolysis. The mutant enzyme was also noted to exhibit a number of newly explored properties that are highly valued in the marketplace, namely considerable stability to detergents, higher resistance towards organic solvents, and potent dehairing ability. Overall, the findings indicated that SAPB-L31I/T33S/N99Y is a promising candidate for future use in a wide range of industrial and commercial applications., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

To attempt cost-effective production of US417 phytase in Bacillus subtilis, we developed an efficient system for its large-scale production in the generally recognized as safe microorganism B. subtilis 168. Hence, the phy US417 corresponding gene was cloned in the pMSP3535 vector, and for the first time for a plasmid carrying the pAMβ1 replication origin, multimeric forms of the resulting plasmid were used to transform naturally competent B. subtilis 168 cells. Subsequently, a sequential optimization strategy based on Plackett-Burman and Box-Behnken experimental designs was applied to enhance phytase production by the recombinant Bacillus. The maximum phytase activity of 47 U ml-1 was reached in the presence of 12.5 g l-1 of yeast extract and 15 g l-1 of ammonium sulphate with shaking at 300 rpm. This is 73 fold higher than the activity produced by the native US417 strain before optimization. Characterization of the produced recombinant phytase has revealed that the enzyme exhibited improved thermostability compared to the wild type PHY US417 phytase strengthening its potential for application as feed supplement. Together, our findings strongly suggest that the strategy herein developed combining heterologous expression using a cloning vector carrying the pAMβ1 replication origin and experimental designs optimization can be generalized for recombinant proteins production in Bacillus.

The cyclodextrin glycosyltransferase (CGTase) of Paenibacillus pabuli US132 was fused to the secretive lipase signal peptide of B. subtilis. This leads to an efficient secretion of the recombinant enzyme into the culture medium of E. coli as an active and soluble form contrasting with the native construction leading to a periplasmic production. In order to enhance the yield of CGTase production, an experimental design methodology was applied for the optimization of the culture composition. Hence, the media components were submitted to preliminary screening using a Plakett-Burman design. The concentrations of the major operating ones were then optimized to enhance the secretion of CGTase using response surface methodology. The findings revealed that concentrations of 0.5% potato starch, 3% yeast extract, 3% tryptone, 1.5% casein hydrolysate, 0.5% NaCl, 0.2% KH2PO4, and 0.02% MgSO4 were the optimal conditions for CGTase production. The experimental value (9.43 U/mL) obtained for CGTase activity was very close to the predicted value (9.27 U/mL).

Based on sequence alignments and homology modeling, Gly 312 and Lys 436 of the maltogenic amylase from Bacillus sp. US149 (MAUS149) were selected as targets for site-directed mutagenesis to improve the thermostability of the enzyme. Variants of MAUS149 with amino acid substitutions G312A, K436R and G312A-K436R had substrate specificities, kinetic parameters and pH optima similar to those of the wild-type enzyme; however, the enzymes with substitutions K436R and G312A-K436R, had an optimal temperature of 45 °C instead of the 40 °C for the wild-type enzyme. The half-life time at 55 °C increased from 15 to 25 min for the double mutant. Molecular modeling suggests that the increase in thermostability was due to new hydrophobic interactions and the formation of a salt bridge and hydrogen bond in the G312A and K436R variants, respectively. The double mutant could be a potential candidate for application in the bread industry., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

The filamentous ascomycete Sclerotinia sclerotiorum is well known for its ability to produce a large variety of hydrolytic enzymes for the degradation of plant polysaccharide material. Two alpha-amylases designated as ScAmy54 and ScAmy43 were biochemically characterized and predicted to play an important role in starch degradation. Those enzymes produce specific oligosaccharides, essentially maltotriose, that have a considerable commercial interest. The primary structures of the two enzymes were analyzed by N-terminal sequencing, MALDI-TOF mass spectrometry, and cDNA cloning, and implied that the two proteins have the same N-terminal catalytic domain and ScAmy43 was produced from ScAmy54 by truncation of 96 amino acids at the carboxyl-terminal region. The result of genomic analysis suggested that the two enzymes originated from the same alpha-amylase gene and that truncation of ScAmy54 to ScAmy43 occurred probably during the S. sclerotiorum cultivation. The structural gene of ScAmy54 consisted of 9 exons and 8 introns, containing a single 1,500-bp open reading frame encoding 499 amino acids including a signal peptide of 21 amino acids. ScAmy54 exhibited high amino acid identity to other liquefying fungal alpha-amylases, essentially in the four conserved regions and in the putative catalytic triad. A 3D structure model of ScAmy54 and ScAmy43 was built using the 3D structure of 2guy from A. niger as template. ScAmy54 with three domains A, B, and C, including the well-known (beta/alpha)8-barrel motif in domain A, has a typical structure of the alpha-amylase family. ScAmy43 composed only of domains A and B constitutes a smallest fungal alpha-amylase with only a catalytic domain.

AmyUS100DeltaIG is a variant of the most thermoactive and thermostable maltohexaose forming alpha-amylase produced by Geobacillus stearothermophilus sp.US100. This enzyme which was designed to improve the thermostability of the wild-type enzyme has acquired a very high resistance to chelator agents. According to modeling structural studies and with the aim of enhancing its resistance towards chemical oxidation, a mutant (AmyUS100DeltaIG/M197A) was created by substituting methionine 197 to alanine. The catalytic proprieties of the resulting mutant show alterations in the specific activity and the profile of starch hydrolysis. Interestingly, AmyUS100DeltaIG/M197A displayed the highest resistance to oxidation compared to the AmyUS100DeltaIG and to Termamyl300, the well-known commercial amylase used in detergent. Further, performance of the engineered alpha-amylase was estimated in the presence of commonly used detergent compounds and a wide range of commercial detergent (liquid and solid). These studies indicated a high compatibility and performance of AmyUS100DeltaIG/M197A, suggesting its potential application in detergent industry.