Search

The liver is known to be the principal site of drug metabolism. Depending on the route of administration, especially in cases of topical and local delivery, evaluation of local drug metabolism in extrahepatic tissues is vital to assess fraction of the drug metabolized. This parameter becomes important from the point of view of drug availability or the contribution to overall clearance. Examples include fraction metabolized in the gut for oral drugs and contribution of pulmonary or renal clearance to total clearance of a drug. Diseases of the eye represent a rising unmet medical need and a number of therapeutics are currently being developed in the form of small molecules and biologics. Treatment of ocular diseases has expanded to explore various topical formulations and local short- and long-term therapies by ocular routes of administration. Until recently, metabolism in the eye for any species, including human, was not well documented, but this topic is gaining wide interest. Many in vitro-ex vivo models, each with separate pros and cons, are being used for studying ocular metabolism. This review is aimed at providing a perspective on the relevance and application of ocular metabolism, melanin binding, and the use of tissue- and cell-derived ocular models in discovery and preclinical development., (Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Diabetic retinopathy (DR) is a leading cause of blindness in all working age groups which contribute to patient's quality of life. Considering the anatomy and physiology of barriers in the eye, the treatment and management of pathologic ocular neovascularization in the posterior segment of the eye in DR is a challenging task. The current and emerging treatment strategies are discussed in this review for better understanding and treatment of the DR. Challenges in conventional therapy and recent developments in nanocarrier based approaches (polymeric, lipid nanoparticles, liposomes and dendrimers) and their advantages in targeting ocular tissues were also discussed in this review.

This study was conducted to investigate the effect of gamma irradiation on physicochemical properties of N-trimethyl chitosan (TMC), diclofenac sodium (DC) and diclofenac sodium loaded N-trimethylchitosan nanoparticles (DC-TMCNs), and to determine suitable doses of gamma rays for sterilization of DC-TMCNs. Physicochemical properties of TMC, DC and DC-TMCNs before and after exposure to gamma rays at various doses were investigated. It was found that gamma irradiation at doses of 5-25kGy did not cause any significant changes in physical and chemical properties of TMC, DC and DC-TMCNs. The bioburden of DC-TMCNs was 1.5×10 6 CFU/vial. The initial contaminating bacteria were radiosensitive bacteria. A number of microorganisms was reduced to 10 -6 after exposure to 9.9kGy of gamma rays. Therefore, DC-TMCNs could be sterilized by gamma irradiation at a dose of 10kGy, which did not alter their physicochemical properties and did not produce any substances toxic to the eye., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A significant number of therapeutic proteins are marketed as pre-filled syringes or other drug/device combination products and have been safely used in these formats for years. Silicone oil, which is used as lubricant, can migrate into the drug product and may interact with therapeutic proteins. In this study, particles in the size range of 0.2-5 μm and ≥1 μm as determined by resonant mass measurement and micro-flow imaging/light obscuration, respectively, resulted from silicone sloughing off the container barrel after agitation. The degree of droplet formation correlated well with the applied baked-on silicone levels of 13 μg and 94 μg per cartridge. Silicone migration was comparable in placebo, 2 mg/mL and 33 mg/mL IgG1 formulations containing 0.04% (w/v) polysorbate 20. Headspace substantially increased the formation of silicone droplets during agitation. The highest particle concentrations reached, however, were still very low compared to numbers described for spray-on siliconized containers. When applying adequate baked-on silicone levels below 100 μg, bake-on siliconization efficiently limits silicone migration into the drug product without compromising device functionality., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Glaucoma is characterized by increased intraocular pressure (IOP) that results in blindness if it remains untreated. Acetazolamide (AZM) is a carbonic anhydrase inhibitor, mainly used to reduce IOP in the treatment of glaucoma. However, the potential of topical treatment is limited, due to its low permeability across the ocular epithelium. An alternative to overcome this limitation is the incorporation of AZM in nanoparticulate systems, such as polymeric nanocapsules (NCs). In this way, the aim of this work was to prepare and characterize NC formulations containing AZM, using ethylcellulose (EC) and Eudragit(®) RS100 (EUD) as encapsulating polymers. The formulations showed high encapsulation efficiency. Particle size measurements showed that NCs are in the nanometric range. Comparing both groups of formulations, the NCEC proved to be smaller than those prepared with EUD. The formulations prepared with EC showed negative zeta potentials, while NCs of EUD were positively charged. For both groups of formulations, no more than 30% of drug was released in 120 min. Ex vivo and in vivo studies evidenced that the NCEC formulations were the most efficient, because an increased amount of permeated drug was observed, along with a greater IOP decrease and longer duration of the effect in normotensive rabbits., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Contact lenses for ophthalmic drug delivery have become very popular, due to their unique advantages like extended wear and more than 50% bioavailability. To achieve controlled and sustained drug delivery from contact lenses, researchers are working on various systems like polymeric nanoparticles, microemulsion, micelle, liposomes, use of vitamin E, etc. Numerous scientists are working on different areas of therapeutic contact lenses to treat ocular diseases by implementing techniques like soaking method, molecular imprinting, entrapment of drug-laden colloidal nanoparticles, drug plate/film, ion ligand polymeric systems, supercritical fluid technology, etc. Though sustained drug delivery was achieved using contact lens, the critical properties such as water content, tensile strength (mechanical properties), ion permeability, transparency and oxygen permeability were altered, which limit the commercialization of therapeutic contact lenses. Also issues like drug stability during processing/fabrication (drug integrity test), zero order release kinetics (prevent burst release), drug release during monomer extraction step after fabrication (to remove un-reacted monomers), protein adherence, drug release during storage in packaging solution, shelf life study, cost-benefit analysis, etc. are still to be addressed. This review provides an expert opinion on different methodology to develop therapeutic contact lenses with special remark of their advantages and limitations.

This study aimed to design a nanocarrier ophthalmic delivery system of muscone, a poorly water-soluble drug. The muscone thermoresponsive nanogels were self-assembled by reverse micelle → positive micelle method. Muscone was demonstrated to have uniform narrow particle size distribution in nanogel by the dynamic light scattering test. The developed nanocomposite hydrogel had a high muscone loading, and the rheology results showed that the phase transition temperature was 34.05°C. Thixotropy test indicated that the nanogel was able to resist the blinking of eyes because of the thixotropy recovery time, which is <5 s. Compared with muscone eye drops, muscone nanogels showed longer retention time on the corneal surface using fluorescent labeling technology and produced a 3.4-fold increase in apparent permeability coefficients (Papp). Draize testing showed that the developed nanogel caused no eye irritation. In vivo pharmacokinetic study indicated that the nanogel could significantly increase the bioavailability of muscone after administration compared with eye drops. These results indicate that self-assembled thermoresponsive nanogel prepared by reverse micelle → positive micelle method has potential for the ophthalmic delivery of poorly water-soluble drugs., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

α-Lipoic acid (ALA) is a powerful antioxidant valuable for prevention and treatment of ophthalmic complications such as diabetic keratopathy and retinopathy. The aim of this work was to develop micelle-based formulations that can enhance the solubility, stability, and corneal permeability of ALA. Compared to a conventional surfactant (sodium dioctylsulfosuccinate), Soluplus(®) (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol copolymer) led to smaller micelles (70-80 vs. 240-528 nm) with improved ability to solubilize ALA, maintaining ocular compatibility (Hens Egg Test on the Chorio-Allantoic Membrane). Soluplus nanomicelles enhanced more than 10-fold ALA solubility compared to common eye drops and withstood strong dilution in lachrymal fluid, filtration through sterilizing membranes, and freeze-drying. Interestingly, Soluplus nanomicelle formulation prepared with 1 or 2 mM block copolymer concentration exhibited in situ gelling capability and transformed into weak gels at 35°C, which is expected to increase corneal residence time. Bovine corneal permeability revealed that Soluplus nanomicelles notably enhanced ALA accumulation into the cornea as well as flux of drug toward the receptor chamber. Overall, these findings point out Soluplus nanomicelles as suitable carriers of ALA that may exhibit improved performance compared to currently available eye drop solutions., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

To develop a potential nanocarrier for the topical ocular administration of curcumin (CUR), a novel thiolated chitosan was synthesized by the covalent binding between N-acetyl-l-cysteine (NAC) and chitosan (CS) to surface modify the nanostructured lipid carrier loaded CUR (CUR-NLC). And the superiorities of the CS-NAC co polymer coated CUR-NLC over chitosan oligosaccharides (COS) or carboxymethyl chitosan (CMCS) modification were also verified in detail. As expected, the increment in particle size and the reversal of zeta potential occurred after surface decorating, and the most prominent electropositivity was obtained for the CS-NAC-CUR-NLC group. Additionally, the utilization of the CS-NAC coating demonstrated an effectively controlled release over 72h and attained a 6.4 and 18.8 fold increase in apparent permeability coefficients (Papp) compared with the CUR-NLC and the self-made eye drops, respectively. Meanwhile, the clearance rate of the NLC labeled with Rhodamine B was significantly delayed in the presence of CS-NAC. By contrast, CS-NAC-CUR-NLC was superior to the COS and CMCS coated ones in view of in vitro release, drug permeability and corneal retention. Moreover, the results of the in-vivo and in-vitro characteristics demonstrated that the promoting effect of CMCS coating was relatively weaker than COS coated ones. Ocular irritation test was executed on the CS-NAC-CUR-NLC, neither a sign of toxicity nor irritation to the external ocular tissues was observed. In conclusion, CS-NAC-CUR-NLC possesses a greater potential as an ocular drug-delivery system comparing with the COS-CUR-NLC and CMCS-CUR-NLC., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The pharmacokinetic behaviors of novel ophthalmic drugs are often preliminarily investigated in preclinical studies using ex vivo animal cornea or corneal cell culture models. During transcorneal passage, topically applied drugs may be affected by drug metabolizing enzymes. The knowledge regarding the functional expression of metabolic enzymes in corneal tissue is marginal; thus, the aim of this study was to investigate cytochrome P450 activity in an organotypic three-dimensional human cornea construct and to compare it with porcine and rabbit corneas, which are commonly used ex vivo cornea models. The total cytochrome P450 activity was determined by measuring the transformation of 7-ethoxycoumarin. Furthermore, the expression of the cytochrome P450 enzyme 2D6 (CYP2D6) was investigated at the protein level using immunohistochemistry and western blotting. CYP2D6 activity measurements were performed using a d-luciferin-based assay. In summary, similar levels of the total cytochrome P450 activity were identified in all 3 cornea models. The protein expression of CYP2D6 was confirmed in the human cornea construct and porcine cornea, whereas the signals in the rabbit cornea were weak. The analysis of the CYP2D6 activity indicated similar values for the human cornea construct and porcine cornea; however, a distinctly lower activity was observed in the rabbit cornea., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

The aim of this work was to assess the performance of resin as an ocular delivery system. Timolol maleate (TM) was chosen as the model drug and an ion exchange resin (IER) as the carrier. The drug-resin complex was prepared using an oscillation method and then characterized regarding particle size, zeta potential, morphology, and drug content. After in vitro drug release study and corneal permeation study were performed, in vivo studies were performed in New Zealand albino rabbits using a suspension with particles sized 4.8 ± 1.2 μm and drug loading at 43.00 ± 0.09%. The results indicate that drug released from the drug-resin ophthalmic suspension permeated the cornea and displayed a sustained-release behavior. Drug levels in the ocular tissues after administration of the drug-resin ophthalmic suspension were significantly higher than after treatment with an eye drop formulation but were lower in body tissues and in the plasma. In conclusion, resins have great potential as effective ocular drug delivery carriers to increase ocular bioavailability of timolol while simultaneously reducing systemic drug absorption.

This study tests the hypothesis that high-density particle-stabilized emulsion droplets (PEDs) can be designed to use gravity to target specific locations in the eye via suprachoroidal space injection. PEDs contain a core of high-density perfluorodecalin measuring ≤35 μm in diameter surrounded and stabilized by fluorescein-tagged, polystyrene nanoparticles that simulate polymeric drug carriers. A hollow microneedle infuses PEDs into the suprachoroidal space of rabbit eyes in vivo, which are later dissected and imaged to quantify distribution of fluorescent nanoparticles within the suprachoroidal space. With cornea oriented upward, such that gravity should move PEDs toward the back of the eye, up to 50% of nanoparticles are in the most posterior quadrant near the macula immediately after injection and 5 d later. With cornea oriented downward, to promote PED movement toward the front of the eye, approximately 60% of injected nanoparticles are targeted to the most anterior quadrant of the posterior segment near ciliary body. Injection of approximately neutral-density particles of the same size shows approximately equal distribution throughout the posterior segment. This study demonstrates for the first time that high-density PEDs can be used to deliver nanoparticles to specific locations in the back of the eye, including targeted delivery to the macula., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

For nearly a decade, thermoresponsive ophthalmic in situ gels have been recognized as an interesting and promising ocular topical delivery vehicle for lipophilic drugs. In this study, a series of thermosensitive copolymers, hyaluronic acid-g-poly(N-isopropylacrylamide) (HA-g-PNIPAAm), was synthesized, by coupling carboxylic end-capped PNIPAAm to aminated hyaluronic acid through amide bond linkages, and was used as a potential carrier for the topical ocular administration of cyclosporine A (CyA). The lower critical solution temperature of HA-g-PNIPAAm59 in aqueous solutions was measured as 32.7°C, which was not significantly affected by the polymer concentration. Moreover, HA-g-PNIPAAm59 microgels showed a high drug loading efficiency (73.92%) and a controlled release profile that are necessary for biomedical application. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) observations showed that HA-g-PNIPAAm microgels were spherical in shape with homogeneous size. Based on the result of the eye irritation test, the HA-g-PNIPAAm microgels formulation was shown to be safe and nonirritant for rabbit eyes. In addition, HA-g-PNIPAAm microgels achieved significantly higher CyA concentration levels in rabbit corneas (1455.8 ng/g of tissue) than both castor oil formulation and commercial CyA eye drops. Therefore, these newly described thermoresponsive HA-g-PNIPAAm microgels demonstrated attractive properties to serve as pharmaceutical delivery vehicles for a variety of ophthalmic applications.