Search

Introduction: The motor weakness in sporadic hemiplegic migraine (SHM) is a poorly understood aura manifestation. Cortical spreading depression affecting motor excitability and alterations of neurovascular coupling may be integral to the development of migraine aura., Methods: We studied 10 right-handed SHM patients and 17 healthy controls with functional near-infrared spectroscopy (fNIRS) in the interictal period. Subjects performed a finger opposition task and had real time determination of oxyhemoglobin (OxyHb) and deoxyhemoglobin (deOxyHb) changes. Recordings were completed with 10 left and 10 right sided cortical channels., Results: Mean baseline to peak changes were significantly reduced in SHM patients as compared to controls bilaterally only for OxyHb measurements in the anteromedial channels. Mean time to peak changes were significant delayed in SHM patients compared to controls bilaterally largely for OxyHb measurements in the posterolateral channels, with the exception of 2 recording channels., Conclusions: Our findings suggest presence of abnormal interictal hemodynamic responses to increased metabolic demands during motor activation in SHM. These bilateral cerebrovascular changes involve OxyHb to a much larger degree than deOxyHb. Baseline to peak changes were evident more in the anteromedial channels, whereas time to peak changes were more evident in the posterolateral channels. These findings suggest that oxygen inflow into specific brain regions may be defective in SHM as opposed to oxygen utilization. Our findings suggest that in SHM, enduring hemodynamic deficits in response to an impending motor task are evident, which can be further explored in future studies, and possibly therapeutic trials., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The predictors for the prognosis of gastric cancer (GC) are not clear. We intended to explore the role of PTEN and microsatellite (MS) in GC, showing their potential as prognostic markers. Primary gastric cancer tissues, adjacent normal tissues, and clinicopathological parameters of 187 patients were collected. The expression level of PTEN and MS status were classified by immunohistochemistry (IHC). The relationship among indicators was compared by the chi-square test. The survival curves were delineated by Kaplan-Meier and tested by Log-rank methods. The impact of multiple factors on prognosis was determined by COX proportional hazards model. Significantly, PTEN expression was associated with lymphatic invasion (p=0.011) and Lauren grade (p=0.015). MS status was associated with differentiation (p=0.006) and Lauren grades (p=0.035). TNM stage was associated with MS status under positive PTEN expression (p=0.014). Patients with microsatellite stability (MSS) had worse median overall survival (OS) than that with microsatellite instability (MSI) (p=0.013). Patients with negative PTEN expression had a worse median OS than that with positive PTEN expression (p<0.001). The tumor subtype of PTEN negative-MSS (p<0.001) and PTEN negative-MSI (p=0.042) were strong predictors of poor survival. Negative PTEN expression and MSS might lead to unfavorable prognosis due to their association with clinicopathological parameters of GC. PTEN expression and MS status could be predictors for the prognosis of GC.

Background: The aim of this study was to evaluate whether adjuvant chemotherapy is associated with improved survival in patients with resectable gastric neuroendocrine carcinomas (G-NECs) or mixed adenoneuroendocrine carcinomas (G-MANECs)., Methods: The study included patients with G-NECs or G-MANECs who underwent surgery in one of 21 centres in China between 2004 and 2016. Propensity score matching analysis was used to reduce selection bias, and overall survival (OS) in different treatment groups was estimated by the Kaplan-Meier method., Results: In total, 804 patients with resectable G-NECs or G-MANECs were included, of whom 490 (60·9 per cent) received adjuvant chemotherapy. After propensity score matching, OS in the chemotherapy group was similar to that in the no-chemotherapy group. Among patients with G-NECs, survival in the fluorouracil (5-FU)-based chemotherapy group and the non-5-FU-based chemotherapy group was similar to that in the no-chemotherapy group. Similarly, etoposide plus cisplatin or irinotecan plus cisplatin was not associated with better OS in patients with G-NECs. Among patients with G-MANECs, OS in the non-5-FU-based chemotherapy group was worse than that in the no-chemotherapy group. Patients with G-MANECs did not have better OS when platinum-based chemotherapy was used., Conclusion: There was no survival benefit in patients who received adjuvant chemotherapy for G-NECs or G-MANECs., (© 2020 BJS Society Ltd Published by John Wiley & Sons Ltd.)

Objective: To investigate the therapeutic effect of simple tunica albugineaincision and ventral penile lengthening surgery on the correction of penile curvature due to asymmetry of the cavernous bodies in hypospadias. Methods: A retrospective analysis was performed in 39 children with hypospadias who underwent simple tunica albuginea incision and ventral penile lengthening surgery for correcting asymmetry of the cavernous bodies from January 2016 to December 2018(36 of them were from Department of Pediatric Urology surgery, The Children's Hospital, Zhejiang University School of Medicine, and 3 from Department of Urology surgery, Affiliated Hospital ofJiaxing University), all of whom aged from 0.5 to 5, with a median age of 1.1 years. During the first stage of the operation, firstly penile skin and sarcoma was released by completely degloving the skin and fascia of penis, secondly the factor of short urethral plate was solved by transection of urethral plate, and then the dorsal length of penis (A), the ventral length of the penis before and after straightening by incision of tunica albuginea (B and C) were measured and recorded; onto the second stage of the operation, an artificial erection test was performed to observe the curvature of the penis, the dorsal and ventral length of the penis (D and E) were measured. The dorsal and ventral length of the penis before and after straightening were compared. Results: The dorsal length of penis (A) was 33-39(35.6±3.2) mm, the length of ventral length of penis before straightening (B) was 28-35 (29.8±2.8) mm and the length of ventral length of penis after straightening (C) was 32-38 (34.3±2.1) mm, which were measured during the first stage of operation, and the difference between B and C was statistically significant ( P <0.05), while the difference between A and C was not statistically significant ( P >0.05). The dorsal length of penis (D) was34-41 (36.4±2.5) mm and the ventral length of penis (E) was 33-40 (35.7±3.6) mm, which were measured during the second stage of operation, and there was no significant difference between D and E ( P >0.05). The degree of penile curvature at the time of erection was less than 15° by measuring with the side photos in all patients during 0.5 to 2.5 years of follow-ups with an average of 1.7 years. Conclusions: Penile curvature due to the asymmetry of the cavernous bodies could be effectively corrected by simple incision of ventral tunica albuginea, which showed a good result of early follow-up. The effect of this surgery on ventral penile straightening could be verified by measuring and comparing the ventral and dorsal length of penis during surgery.

This study aims to investigate the role of PM 2.5 exposure in inducing apoptosis of alveolar epithelial cells and thereafter emphysema in mice, and the underlying mechanism. PM 2.5 exposure model in mice was constructed. Lung tissues were harvested from healthy mice and model mice for hematoxylin and eosin (H&E) staining. Protein levels of Forkhead box O3 (FOXO3A) and BIM in lung tissues were detected by Western blot. Subsequently, A549 cells were induced with increased doses of PM 2.5 , followed by determination of relative levels of FOXO3A, BIM (Bcl-2 interacting mediator of cell death) and clv-caspase3. Apoptosis in PM 2.5 -exposed A549 cells was assessed. Chromatin immunoprecipitation (ChIP) assay was conducted to uncover the interaction between FOXO3A and BIM. Finally, regulatory effects of FOXO3A/BIM on apoptosis of A549 cells were determined. PM 2.5 exposure resulted in expansion of alveolar spatial structure and decline of lung function, thus leading to emphysema in mice. Protein levels of FOXO3A and BIM were markedly upregulated in lungs of model mice. Relative levels of FOXO3A, BIM and clv-caspase3 were enhanced in PM 2.5 -exposed A549 cells, which were reversed by transfection of si-FOXO3A. ChIP assay confirmed that FOXO3A was able to regulate BIM transcription through binding its promoter regions. Importantly, regulatory effects of FOXO3A on apoptosis of PM 2.5 -exposed A549 cells were partially reversed by overexpression of BIM. PM 2.5 exposure leads to upregulation of FOXO3A, which triggers BIM transcription, thus inducing apoptosis of alveolar epithelial cells and emphysema in mice., (Copyright 2020 Biolife Sas. www.biolifesas.org.)

Fabrication of conventional complete dentures involves a complex restoration method, requiring significant time and typically involving primary impressions, definitive impressions, jaw relation records, clinic try-in, and complete denture placement, which has been used for nearly a century without change. A novel digital system named Functionally Suitable Denture (FSD) was researched and developed so as to reduce clinical steps, operation difficulties and errors of complete denture restoration. It pioneered a unique diagnostic complete denture aided by computer aided design (CAD) & 3D printing, by which, the functional impression, jaw relation, and try-in (3 steps) were simplified to 1 step, thus the number of visits to the dentist was reduced by 2 times. Moreover, for the first time, it put forward a CAD software of template matching based on the expert design, which was an efficient and intelligent design scheme, and the excellent denture experts' experience and skills could be inherited and iterated. The system included the 3D scanner with appropriate accuracy and high efficiency, the CAD software, the special 3D printer and process software, and the innovative clinical operation process. The Patent Cooperation Treaty (PCT) patent international search report showed that all the 15 claims of the technology were of novelty, creativity and industrial utility. All the digital products were independently developed and made by Peking University School and Hospital of Stomatology, China. The design and manufacture process of denture prosthesis was fast, simple and accurate. At the same time, personalized functional and aesthetic matching of the patients after wearing prosthesis was realized. It effectively solved the global problems of "slow, difficult and inaccurate" of the traditional manual technology of complete denture, and brought good news to edentulous patients. Compared with the traditional complete denture treatment, FSD system has a wide range of applications for different types of edentulous patients, including those with severe resorption of the alveolar ridge or a high occlusal force. Furthermore, the low-cost of 3D printers, compared with expensive milling machines, may make the approach more accessible. This review describes that our research is related to the development of the FSD system, including multi-source data acquisition technology, three generations of complete denture design software, 3D printing systems of individual tray and complete denture pattern, the clinical and laboratory operation process of the FSD system.

Objective: To measure the dimensional data of complete dentures and to design a novel tray for recording maxillomandibular relationship of edentulous patients., Methods: For the measurement, 100 pairs of complete dentures from the clinic were surveyed for the following parameters: a1, the distance between the middle fossa of the upper left and right first molars; a2, the anterior-posterior distance between the middle fossa of the upper first molars and the incisal edge; a3, the width of the upper denture; a4, the anterior-posterior length of the upper denture; a5 1 , the height from the mesio-lingual cusp of the right upper first molar to the saddle surface; a5 2 , the height from the central fossa of the right lower first molar to the saddle surface; a6, the height from the notch of the upper lip frenulum to the upper central incisor edge; a7, the least thickness of the labial saddle base in the upper central incisor region. Based on the data, the trays with different sizes were designed and fabricated, and the key parameters were: b1, the distance between the foramina of screw posts, b2, the anterior-posterior distance between the foramina of the screw posts and the incisal edge; b3, the width of the tray; b4, the anterior-posterior length of the tray; b5 1 , the height of the posterior platform with the screw nut; b5 2 , the height of the screw post; b6, the height of the anterior tray handle; b7, the thickness of the anterior tray handle., Results: The minimum, average and maximum data for each parameter were (in millimeter): a1: 37.1, 44.5, and 59.6; a2: 22.6, 29.0, and 38.1; a3: 48.5, 58.2, and 76.6; a4: 37.4, 50.8, and 61.0; a51: 5.6, 9.5, and 14.7; a52: 3.8, 9.9, and 18.8; a6: 8.9, 16.6, and 24.7; a7: 1.2, 2.8, and 5.9. Based on the data, the trays in small, medium and large sizes were designed and fabricated. In clinical application, the putty silicone rubber impression material was used to reline the tray, meanwhile the posterior platform and anterior tray handle were set as the occlusal plane, then the screw posts were added and adjusted till the proper vertical dimension, after that, the putty silicone rubber impression material was added around the screw posts to record the horizontal maxillomandibular relationship, finally, the anterior surface of the tray handle was used to record the midline of the face and lower edge of the upper lip at rest and with smile., Conclusion: The dimensional data offered reference for the analysis of restoration space in edentulous patients. The tray designed and fabricated in this study may serve as a new tool for recording the maxillomandibular relationship.

With the wide application of digital technology in the field of stomatology, the acquisition of three-dimensional tooth and dentition information through three-dimensional (3D) image data and optical scan data has become an indispensable process in clinical diagnosis and analysis. Cone-beam CT images and optical scanning images have their own characteristics in terms of data acquisition range and the accuracy of data. Single data source is not accurate enough or complete in the delivery of tooth and dental information. At present, two data sources are used to construct a 3D crown root model with high-precision crown and complete root information to meet the requirement of clinical orthodontic functional setup and implant surgical guide design. The integration of tooth crown and root is one of the focused topics of clinical research. This review will summarize the research progress of 3D crown root model construction method, introduce the application of various algorithms, and analyze the characteristics of these approaches, in order to provide reference for clinical application and scientific research.

Intraoral three-dimensional scanning technology has been adopted in stomatology field and developed rapidly with improved accuracy. At present, the scanning accuracy of the intraoral three-dimensional scanners used in restoration of single crown, three unit fixed partial bridge and single implant crown satisfies the clinical requirements. While for restoration of multi-unit fixed, the scanning accuracy is not enough. There are still technical bottlenecks for scanning functional motion boundary of soft tissue, especially for direct acquisition of edentulous functional impressions. Through literature review and analysis, we summarize the intraoral scanning accuracy of oral hard and soft tissues, and analyze the clinical applicability and limitations of intraoral scanning technology, providing reference for clinical application.

Objective: To provide a reference for using intraoral scanners for making clinical diagnostic dentures of edentulous jaws by comparing the accuracy of three intraoral scanners for primary impression and jaw relation record of edentulous jaws., Methods: This study contained 6 primary impressions of the edentulous patients. Each of the impressions consisted of the maxillary primary impression, the mandibular primary impression and the jaw relation record. For each of them, a dental cast scanner (Dentscan Y500) was used to obtain stereolithography (STL) data as reference scan, and then three intraoral scanners including i500, Trios 3 and CEREC Primescan were used for three times to obtain STL data as experiment groups. In Geomagic Studio 2013 software, trueness was obtained by comparing experiment groups with the reference scan, and the precision was obtained from intragroup comparisons. Registered maxillary data of the intraoral scan with reference scan, the morphological error of jaw relation record was obtained by comparing jaw relation record of the intraoral scan with the reference scan. Registered mandibular data with jaw relation record of intraoral scan and the displacement of the jaw position were evaluated. Independent samples t test and Mann-Whitney U test in the SPSS 20.0 statistical software were used to statistically analyze the trueness, precision and morphological error of jaw relation record of three intraoral scanners. The Bland-Altman diagram was used to evaluate the consistency of the jaw relationship measured by the three intraoral scanners., Results: The trueness of i500, Trios 3 and CEREC Primescan scanners was (182.34±101.21) μm, (145.21±71.73) μm, and (78.34±34.79) μm for maxilla; (106.42±21.63) μm, and 95.08 (63.08) μm, (78.45±42.77) μm for mandible. There was no significant difference in trueness of the three scanners when scanning the maxilla and mandible(P>0.05). The precision of the three scanners was 147.65 (156.30) μm, (147.54±83.33) μm, and 40.30 (32.80) μm for maxilla; (90.96±30.77) μm, (53.73±23.56) μm, and 37.60 (93.93) μm for mandible. The precision of CEREC Primescan scanner was significantly better than that of the other two scanners for maxilla (P<0.05). Trios 3 and CEREC Primescan scanners were significantly better than i500 scanner for mandible (P<0.05). The precision of the i500 and Trios 3 scanners for mandible was superior to maxilla (P<0.05). The upper limit of 95% confidence intervals of trueness and precision of three scanners for both maxilla and mandible were within ±300 μm which was clinically accepted. The morphological error of jaw relation record of the three scanners was (337.68±128.54) μm, (342.89±195.41) μm, and (168.62±88.35) μm. The 95% confidence intervals of i500 and Trios 3 scanners were over 300 μm. CEREC Primescan scanner was significantly superior to i500 scanner(P<0.05).The displacement of the jaw position of the three scanners was (0.83±0.56) mm, (0.80±0.45) mm, and (0.91±0.75) mm for vertical dimension; (0.79±0.58) mm, (0.62±0.18) mm, and (0.53±0.53) mm for anterior and posterior directions; (0.95±0.59) mm, (0.69±0.45) mm, and (0.60±0.22) mm for left and right directions. The displacement of the jaw position of the three scanners in vertical dimension, anterior and posterior directions and the left and right directions were within the 95% consistency limit., Conclusion: Three intraoral scanners showed good trueness and precision. The i500 and Trios 3 scanners had more errors in jaw relation record, but they were used as primary jaw relation record. It is suggested that three intraoral scanners can be used for obtaining digital data to make diagnostic dentures and individual trays, reducing possible deforming or crack when sending impressions from clinic to laboratory.

Objective: To explore the possibility of the Smile Lite MDP (Smile Lite Mobile Dental Photograph) portable dental photography system applying in anterior teeth aesthetic photography, and to provide the chance to simplify aesthetic photography process and facilitate communication among patients, dentists and dental technitians., Methods: The Smile Lite MDP photography system combined with the smartphone were used to photograph the front occlusal phase photos of anterior teeth. The photographic conditions including the color temperature parameter, the Smile Lite MDP light position and the intensity settings were explored. The best photographic conditions were chosen by blind evaluation within experienced dentists and technicians through the method of the visual analogue scale/score (VAS) evaluation, which went through statistical analysis to figure out the optimum photograghic conditions. Smile Lite MDP photography system was used to photograph the front occlusal phase photos of anterior teeth under the optimum parameter by different magnifications. The width/height ratio of the central incisor and the front width ratio of the upper anterior teeth in those photos were measured and calculated respectively. The accuracy of the anterior teeth photos taken by Smile Lite MDP photography system was analyzed based on the photographs taken by digital single lens reflex (DSLR) camera., Results: The optimum color temperature parameter of Smile Lite MDP portable camera system was 5 000 K, the optimum magnification was 4 times, the best light position was the side lights of Smile Lite MDP, the optimum intensity of lights was 2 grades. Photos taken by the optimum parameters won the highest score during the VAS evaluation and the result of statistical analysis had significant difference compared with other groups (P<0.05). When comparing the photos of the upper anterior teeth taken by the Smile Lite MDP portable photography system using 4 times magnification or by DSLR using the standard parameters, there was no significant difference neither in the width/hieght ratio of the central incisor nor in the front width ratio of the upper anterior teeth (P>0.05)., Conclusion: The Smile Lite MDP portable dental photography system applying in anterior teeth aesthetic analysis photography was capable to show the color and shape of anterior teeth in an accurate way by using the right photography parameters. Therefore, Smile Lite MDP portable dental photography system was considered to be a simple and easy photographic tool in clinical work.

Objective: To analyze the distribution and area of occlusal contacts of clinical dental model using three kinds of digital analysis methods, to compare the results of these methods and traditional occlusal analysis method, and to further analyze the characteristics of each digital analysis method., Methods: A set of plaster models of normal subjects was selected. The models were scanned by lab scanner 3shape E4 and the files were exported in a stereolithography file format. In 3D analysis software Geomagic Studio 2013 and Geomagic Qualify 2013, the corresponding results of 3D occlusal contact distribution and occlusal contact area were obtained through three digital analysis methods: "3D color difference map method", "point cloud analysis method", and "virtual articulating paper method". The occlusal contact distribution and occlusal contact area were also obtained by two traditional occlusal analysis methods: "silicone interocclusal recording material method" and "scanned articulating paper mark method". A threshold of 100 μm was used to analyze the occlusal contacts and 100 μm was also the thickness of articulating paper used in this study. The results of these five different occlusal analysis methods were evaluated qualitatively and quantitatively., Results: The results of 3D occlusal contact distribution obtained by the above five methods were basically consistent. The total occlusal contact area obtained by 3D color difference map method, point cloud analysis method, virtual articulating paper method, silicone interocclusal recording material method and scanned articulating paper mark method were 133.10 mm², 142.08 mm², 128.95 mm², 163.31 mm², and 100.55 mm² respectively. There was little difference between the results of three digital analysis methods. The results of occlusal contact area obtained by the digital methods and the traditional methods were different., Conclusion: The three digital analysis methods can provide reliable and accurate analysis results of occlusal contact distribution and occlusal contact area of dental model. The results obtained by these methods can serve as references for the digital occlusal surface design of dental prosthesis and clinical occlusal analysis.

Objective: To evaluate the three-dimensional (3D) reconstruction accuracy of the intercuspal occlusion (ICO) of the dental casts, by the dental articulator position method, and provide a reference for clinical application., Methods: The standard dental casts in ICO were mounted on average values articulator, and five pairs of milling resin cylinders were respectively attached to the base of both the casts. 100 μm articulating paper and occlusal record silicone rubber were used to detect the occlusal contact number between the posterior teeth of casts mounted on articulator in ICO. The occlusal contact numbers NA detected by the two methods were calculated simultaneously, as the reference. After the upper and lower casts were scanned separately, and the buccal data of casts in ICO were scanned with the aid of the dental articulator position, registration was carried out utilizing the registration software. Then the digital casts mounted in ICO as well as the buccal occlusal data were saved in standard tessellation language (STL) format. Geomagic Studio 2013 software was used to analyze the contact number NS between digital upper and lower casts by the "deviation analysis" function. The differences were compared between N S and N A , to evaluate the sensitivity and positive predict value (PPV) of the model scanner to reproduce the occlusal contact with the aid of dental articulator position. The distance D R between the centers of the circles at the top surface of the upper and lower corresponding cylinders was obtained by the three-coordinate measuring system Faro Edge, as the reference value. The Geomagic Studio 2013 software was used to construct the cylinders of digital casts and the distance D M between the centers of the circles at the top surface of the corresponding cylinders were measured, as the test value. The one-sample T test was used to analyze the variable differences between D M and D R ., Results: The PPV of reproducing the occlusal contact point was 0.76 and sensitivity was 0.81. The distance error of the opposite cylinder was (0.232±0.089) mm. There was no statistical difference between the feature points 5-5', while there were statistical differences between the other feature points., Conclusion: By the dental articulator position method, the model scanner reproduces the occlusal contact point with high sensitivity and PPV, and that meets clinical needs. Meanwhile, the distance between the feature points is greater than the reference value, which will lead to occlusal disturbance, and require clinical grinding.

Objective: To study the visual sensitivity threshold of physician's naked eye to the difference of nasolabial angle in edentulous jaw patients, and to provide a reference value for the study of aesthetic evaluation of soft tissue profile for the difference of nasolabial angle that can be recognized by human eyes., Methods: Three-dimensional facial images of three edentulous patients with different diagnostic dentures introoral were obtained. Lateral screenshots of each patient's three-dimensional facial image with the same scale were obtained by using reverse engineering software (Geomagic studio 2014).The screenshot of the patient's three-dimensional facial image with suitable lip support (The suitable lip support was confirmed by both patients and prosthodontists who had clinical experience for more than 20 years) was taken as the reference picture, and the remaining pictures were grouped with it respectively. All the pictures were observed in random order by the subjects. Fifteen dentists were asked to judge the difference of nasolabial angle between the two pictures of each group on the computer screen. The difference of nasolabial angle between the two pictures in each group was measured and calculated. The ROC curve was drawn, and the best cut-off value was calculated as the visual sensitivity threshold., Results: The data of the 15 subjects were used to draw ROC curves separately. The maximum and minimum best cut-off values were 5.55 degrees and 3.12 degrees respectively. The ROC curve of the whole 15 subjects was drawn after data aggregation, and the best cut-off value was 5.36 degrees (AUC=0.84>0.5, P=0.000<0.05). When the difference of nasolabial angle was above 5.36 degrees, the subjects could recognize it effectively., Conclusion: There is a visual limit in the observation of the nasolabial angle with the naked eye. In this study, a visual sensitivity threshold of 5.36 degrees for the difference of the nasolabial angle was obtained. The difference of nasolabial angle below this value can be regarded as no clinical significance. This result provides a reference value for human eyes to recognize the difference of nasolabial angle in soft tissue profile aesthetic evaluation. It can be applied to the aesthetic evaluation of soft tissue profile and can be used as the error level of related research with nasolabial angle as an index for accuracy evaluation.

Objective: To establish a quantitative three-dimensional method based on intraoral scan to evaluate the changes of soft tissue, and to evaluate the changes of supracrestal gingival thickness (SGT) in skeletal class Ⅲ patients induced by periodontal regenerative and corticotomy surgery (PRCS). Methods: Twenty-two systematically and periodontally healthy skeletal class Ⅲ patients (4 males and 18 females, aged between 19 and 35 years), who were in need of combined orthodontic-orthognathic treatment and referred to the Department of Periodontology from the Department of Orthodontics and the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from January, 2018 to March, 2019, were collected in the study. The teeth involved were 112 anterior teeth (46 maxillary anterior teeth and 66 mandibular anterior teeth). PRCS in anterior tooth area was conducted before orthodontic decompensation. Probing depth (PD), bleeding index (BI) and keratinized gingiva width (KGW) were recorded before surgery and 6 months post-surgery. The intraoral digital impressions of maxillary and mandibular anterior teeth were obtained by 3-shape intraoral scanner before surgery and 6 months after surgery. The Standard Tessellation Language (STL) files were processed using Geomagic qualify 12.2 software to establish the soft tissue morphological measurement model, and to quantitatively analyze the changes of gingival thickness situated 1 to 2 mm apical to the free gingival margin on the median sagittal measurement plane. Results: Probing depth and bleeding index had no significant difference before and 6 months after operation ( P >0.05). KGW in 6-month post-operation group [(5.18±2.32) mm] was significantly higher than that in pre-operation group [(4.22±1.43) mm] ( P< 0.05). Supracrestal gingival thickness situated 1 to 2 mm apical to the free gingival margin also significantly increased 6 months after surgery ( P< 0.05). The changes of gingival thickness situated 1 to 2 mm apical to the free gingival margin in the upper anterior area were (0.68±0.56) and (1.00±0.69) mm, respectively. The changes in the lower anterior area were (0.38±0.42) and (0.58±0.45) mm, respectively. The gingival changes of the upper anterior teeth were also significantly higher than those of the lower anterior teeth ( P< 0.01). Conclusions: The described quantitative measurement based on intraoral scan could be an effective method for quantitative evaluation of the changes of soft tissue. PRCS could safely increase the supracrestal gingival thickness as well as KGW in skeletal class Ⅲ patients who were in need of combined orthodontic-orthognathic treatment.

Background: The prognostic values of the AJCC staging system for gastric cancer (GC-AJCC), the AJCC staging system for gastric neuroendocrine tumours (NET-AJCC) and the European Neuroendocrine Tumor Society (ENETS) system for gastric neuroendocrine carcinoma and mixed adenoneuroendocrine carcinoma (MA)NEC remain controversial., Methods: Data on patients with (MA)NEC from 21 centres in China were analysed. Different staging systems were evaluated by performing Kaplan-Meier survival analysis and calculating the concordance index (C-index) and Akaike information criterion (AIC). Based on three existing systems, a modified staging system (mTNM) was developed., Results: A total of 871 patients were included. In the GC-AJCC system, an overlap was noticed for pT2 and pT3 categories. Patients with stage IIIC disease had a similar prognosis to those with stage IV disease. The pT categories of the NET-AJCC system had a lower C-index and higher AIC than those of the other systems. In the ENETS system, there was a low proportion (0·2 per cent) of patients with stage IIIA and a high proportion (67·6 per cent) of stage IIIB disease. The mTNM system adopted the NET-AJCC pT and GC-AJCC pN and pM definitions, and was developed based on the ENETS stage definitions. The proportion of patients in each stage was better distributed and the mTNM system showed improved prognostic performance in predicting overall and disease-free survival., Conclusion: The mTNM system offers more accurate prognostic value for gastric (MA)NEC than the AJCC or ENETS staging systems., (© 2020 BJS Society Ltd Published by John Wiley & Sons Ltd.)

Objective: The aim of this study was to detect the relationship between long-chain non-coding RNA (lncRNA) NEAT1 and microRNA-1224 (miR-1224) in lung cancer and to explore its underlying mechanism., Materials and Methods: The expression levels of lncRNA NEAT1 and miR-1224 in lung cancer tissues and cells were detected by quantitative Real Time-Polymerase Chain Reaction (qRT-PCR). The interaction between lncRNA NEAT1 with miR-1224, miR-1224, and KLF3 was detected by Dual-Luciferase Reporter Gene Assay. MTT 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and flow cytometry were used to detect the changes in the proliferative and apoptosis abilities of lung cancer cells after silencing lncRNA NEAT1 or up-regulating miR-1224, respectively., Results: Compared with adjacent normal tissues, lncRNA NEAT1 was significantly up-regulated, while miR-1224 was significantly down-regulated in lung cancer tissues. LncRNA NEAT1 could specifically bind to the 3'UTR of miR-1224 and regulate its expression. The inhibition of lncRNA NEAT1 remarkably reduced the proliferation and enhanced the apoptosis of lung cancer cells. However, the upregulation of the expression of miR-1224 level could significantly inhibit proliferation and promote the apoptosis rate of lung cancer cells. Furthermore, miR-1224 could downregulate KLF3 expression by directly binding to its 3'UTR., Conclusions: LncRNA NEAT1 can sponge the expression of miR-1224, thereby affecting the proliferation and apoptosis of lung cancer.

Objective: To evaluate the risk factors of coloanal anastomotic stricture after laparoscopic intersphincteric resection (Lap-ISR) for patients with low rectal cancer. Methods: A retrospective case-control study was performed to collect clinicopathological data from a prospective database (registration number: ChiCTR-ONC-15007506) at the Department of Colorectal Surgery, the Characteristic Medical center of PLA Rocket Force. From June 2011 to August 2018, a total of 144 consecutive patients with low rectal cancer who underwent Lap-ISR were enrolled in the study. Inclusion criteria: (1) reconstruction of digestive tract by end-to-end hand-made coloanal anastomosis (HCAA); (2) distance from lower tumor margin to anorected sphincter ring < 1 cm and distance from lower tumor margin to intersphincteric groove ≥ 1 cm; (3) T1-3 stage tumor with expected negative circumferential resection margin evaluated by preoperative MRI or 3D endoanal ultrasound; (4) rectal cancer confirmed as well- or moderately-differentiated adenocarcinoma; (5) preoperative Wexner incontinence score >10 points. Exclusion criteria: (1) follow-up period less than 3 months; (2) multiple primary cancers; (3) undergoing colonic J-pouch, coloplasty or reconstruction of end-to-side coloanal anastomosis; (4) death within perioperative period (within 3 months after surgery). Coloanal anastomotic stricture was diagnosed if the index finger or 12 mm electronic colonoscope had obvious resistance through the anastomosis or new rectum, or could not pass, accompanied by clinical symptoms such as difficult defecation and anal incontinence. Degree of anastomotic stricture was divided into 3 grades: grade A required anal enlargement, laxative or enema to assist defecation without active surgical treatment; grade B required surgery or endoscopic intervention; grade C required definitive ostomy, including unreducible preventive ileostomy or permanent colostomy. Univariate and multivariate analysis were used to evaluate the effects of 28 variables, including baseline data (age, gender, body mass index, neoadjuvant therapy, etc.), tumor-related factors (distance between tumor low margin and anal edge, maximum diameter of tumor, TNM staging, etc.), surgery-related factors (operation time, intraoperative blood loss, ISR procedure, anastomotic height, etc.) and anastomotic leakage, on the postoperative coloanal anastomotic stricture. Univariate analysis used χ(2) test or Fisher's exact test, then factors with P <0.05 were further included in multivariate analysis using logistic regression. Results: A total of 144 patients were enrolled in the study, including 90 males and 54 females with a median age of 59 years and median BMI of 24.88 kg/m(2). R0 resection rate was 96.5% (139/144). Median tumor distal resection margin was 1.5 (0.5 to 3.0) cm. Median follow-up was 31.5 (4 to 86) months. Coloanal anastomotic stricture was observed in 19 patients (13.2%), including 3 cases (2.1%) of grade A, 9 cases (6.2%) of grade B, and 7 cases (4.9%) of grade C. The median interval from the initial surgery to diagnosis of anastomotic stricture was 7 (1 to 31) months. Univariate analysis showed that male (χ(2)=6.795, P =0.009), radiotherapy (χ(2)=13.330, P =0.001), operation type of ISR (χ(2)=7.996, P =0.013), and anastomotic leakage (χ(2)=10.198, P =0.004) were associated with the postoperative coloanal anastomotic stricture. Multivariate analysis further indicated that male (OR=5.975, 95% CI: 1.209-29.534, P =0.028), postoperative radiotherapy (OR=8.748, 95% CI: 2.397-31.929, P =0.001), and anastomotic leakage (OR=6.313, 95% CI: 1.834-21.734, P =0.003) were independent risk factor of postoperative coloanal anastomotic stricture. Conclusion: For male patients, or patients with postoperative radiotherapy or anastomotic leakage, close follow-up should be carried out to prevent postoperative coloanal anastomotic stricture following Lap-ISR.

Tibial dyschondroplasia (TD) is a type of bone deformity found in fast-growing chickens, which induce inflammatory responses. Prostaglandins (PGs) implicate in bone formation and bone resorption, associated with inflammation in an autocrine/paracrine manner. This study used qRT-PCR and immunohistochemistry analysis to identify the expression patterns of PG-related genes in the erythrocytes of broiler chickens and explore the effects of thiram-induced TD and the recombinant glutathione-S-transferase A3 (rGSTA3) protein on the expression of PG-related genes: GSTA3, cyclooxygenase 2 (COX-2), prostaglandin D2 synthase (PTGDS), prostaglandin E synthase (PTGES), prostaglandin E2 receptor (PTGER) 3, PTGER4 and prostaglandin reductase 1 (PTGR1). Interestingly, the results showed that these seven PG-related genes expression was identified in the erythrocytes of broiler chicken, and thiram-induced TD suppressed the expression of these PG-related genes in the initial stage of TD and promoted their expression in TD recovery. These findings demonstrated that the immunoregulatory function of erythrocytes can be inhibited in the early stage of TD and promoted in the recovery stage by modulating the expression of PG-related genes. Further, the rGSTA3 protein can modulate the expression of PG-related genes in erythrocytes and participate in the recovery of TD., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Objective: This study explored the prognostic factors of patients with supratentorial anaplastic gliomas and tried to propose a prognostic scoring scale with aim to provide theoretical reference for clinical treatment. Methods: The clinical data of 198 patients surgically treated for primary anaplastic glioma in Henan Provincial People's Hospital between Jan 2009 and Jan 2018 were reviewed. Univariate and multivariate analyses were used to identify prognostic factors with methods of Kaplan-Meier plot and Cox proportional hazard model, respectively. Based on the prognostic factors, a scoring scale was thereby proposed. Results: Univariate analysis results showed age, tumor location, tumor diameter, preoperative KPS, extent of resection, radiotherapy, chemotherapy, pathology with oligodendroglial components, 1p/19q, IDH, MGMT were significantly correlated with survival ( P< 0.05). Multivariate analysis results showed age ≥45 years old, tumor diameter ≥6 cm, preoperative KPS<70, without radiotherapy, 1p/19q intact, MGMT promoter unmethylation were independent prognostic risk factors ( P< 0.05). Patients were scored with 0-6 points based on the formulation that each independent prognostic risk factor was assigned with 1 point. Then patients were further grouped according to the score. Those with less than 2 points were low-risk group, equal to 2 points were medium-risk group, equal to 3 points were high-risk group, more than or equal to 4 points were extremely high-risk group. There were significant differences in survival between the different groups ( P< 0.000 1). Conclusions: The higher score, the shorter survival time. This prognostic scoring scale can provide a theoretical basis for the prognosis estimation of patients with anaplastic glioma and help to carry out personalized clinical treatment.

Objective: To establish a reference dental model used for trueness evaluation of photo-curing 3D printing technologies, and to establish a multidimensional trueness evaluation method based on the reference dental model, which can yield a comprehensive objective evaluating result., Methods: A reference dental model was designed in 3ds Max 2018 software based on the statistical analysis results of dental crown and dental arch of Chinese population in previous studies in order to simulate a real dental model. This model was made up of several simple geometrical configurations, which could minimize the manual measurement error. Physical models were fabricated using three types of photo-curing three-dimensional printers using different techniques: Objet30 Pro (PJ), Projet 3510 HD Plus (MJP), and Perfactory DDP (DLP). The models were scanned by a laser-scanning device and the files were exported in a stereolithography file format. In Geomagic Studio 2012, 3D shape deviations (including overall 3D deviation, flatness error, parallelism error and perpendicularity error) were measured by several commands using the data obtained from the scanning. With regard to the feature size of the simulated dental crown and dental arch, linear measurements (including mesiodistal diameter, buccolingual diameter, crown height of each simulated dental crown and feature size of dental arch) were recorded for selected landmarks using a digital caliper. The measurement results of feature sizes were used to analyze the occlusal plane percentage error and the occlusogingival direction percentage error., Results: For the 3D shape deviation, the results showed that the printed model made by the Objet30 Pro had the lowest overall 3D deviation, the model made by Projet 3510 HD Plus had the best perpendicularity accuracy and the model made by Perfactory DDP had the best flatness accuracy. In terms of the accuracy of the feature size, the model made by the Objet30 Pro was the most accurate in consideration of the results of the occlusal plane percentage error and the occlusogingival direction percentage error., Conclusion: The reference dental model and the trueness evaluation method using this model is universally applicable in evaluating the trueness of photo-curing three-dimensional printed dental model and can provide a comprehensive objective evaluating result, which can serve as a reference for the clinical use of photo-curing 3D printing technology.

Objective: To explore the clinical value of static and dynamic magnetic resonance imaging (MRI) in evaluating the effect of electrical stimulation combined with biofeedback in the treatment of pelvic organ prolapse postpartum. Methods: A total of 50 primiparas diagnosed as pelvic organ prolapse postpartum from February 2016 to November 2017 were randomly divided into treatment group (24 cases) and control group (26 cases). The control group recovered spontaneously, and the treatment group received electric stimulation combined with biofeedback therapy (6 weeks). All subjects underwent static and dynamic MRI before and after treatment. The thickness of bilateral puborectal muscles, levator ani hiatus area (LHA), H line, M line and levator ani plate angle (LPA) were respectively measured in rest state and strain state at 42 days and 12 weeks postpartum, and the differences of parameters were compared between two groups. Results: (1) Compared with 42 days postpartum, the effective rate of pelvic organ prolapse was 15.4% (4/26) in the control group and 62.5% (15/24) in the treatment group, which was significantly higher than that of the control group ( P< 0.01). (2) Compared with 42 days postpartum, the thickness of bilateral puborectal muscles in the treatment group increased at 12 weeks postpartum, while that of the H line, LHA, M line and LPA in strain state decreased. (3) At 12 weeks postpartum, the thickness of the bilateral puborectal muscle in the treatment group was greater, and LHA, M line, and LPA in strain state were less than that in the control group (all P< 0.05). Conclusion: Electrical stimulation combined with biofeedback therapy can improve pelvic organ prolapse due to vaginal delivery, and the static and dynamic MRI can objectively evaluate the effect of pelvic floor rehabilitation therapy on improving the pelvic floor supporting structure and function, providing an important support and guidance for restoration of postpartum pelvic organ prolapse.

Objective: To establish a quantitative three-dimensional method based on intraoral scan and apply it to evaluation of the facial soft tissue contour alterations following single immediate implant and immediate provisionalization (IIPP) in central incisor via intraoral scanning. Methods: This study was a prospective clinical study. The trial was conducted at Department of Implantology, Peking University School and Hospital of Stomatology, from January 2016 to September 2017. Twenty-nine eligible consecutive patients (15 women, 14 men) with a mean age of (34.3±12.0) were included and received immediate replacement of the failure maxillary single central incisor. A screw-retained immediate restoration was delivered for each patient. At 6-month follow-up, impression was taken and a screw-retained permanent restoration was performed for each patient. The anterior maxillary region was scanned by an intraoral scanning system at pre-surgery and 1-year follow-up. The Standard Tessellation Language (STL) files were output to a dedicated software and superimposed. Mid-facial recession and gingival zenith symmetry at 1-year follow-up were measured in the digital models. Three-dimensional configurations of the contour change volume were calculated and reconstructed for visual analysis. Furthermore, the following parameters were used to analyze the reconstructed volume: mean contour change in thickness (△d), mesio-distal width (D(W)), coronal-apical height (D(H)), contour change at 0, 1, 2, 3, 4, 5 mm apical to the free gingival margin on the implant site. Results: Twenty-seven out of twenty-nine enrolled patients were finally available for analysis. At 1-year follow-up, the mid-facial mucosa level at implant site was (0.23±0.39) mm apical to the gingival zenith of the contralateral tooth. In general, a contour collapse was found in every patient. △d, D(W) and D(H) of the collapsed volume were (0.62±0.22), (11.03±1.74) and (6.82±1.52) mm, respectively. Contour change at 0, 1, 2, 3, 4, 5 mm apical to the free gingival margin on the implant site were (0.54±0.48), (0.87±0.62), (1.03±0.46), (0.96±0.52), (0.90±0.52), (0.89±0.57) mm. Conclusions: The described quantitative measurement based on intraoral scan can be an effective method for assessment of soft tissue contour changes. At 1 year following single IIPP treatment in maxillary incisor, free gingival margin is stable, with only mild recession. The mean level of the facial soft tissue contour collapse is 0.62 mm.

Objective: To investigate the effect of retigabine on the blood-brain barrier permeability in rats with cerebral ischemia-reperfusion and its mechanism., Materials and Methods: A total of 90 Sprague-Dawley (SD) rats were selected to prepare a rat model of focal cerebral ischemia-reperfusion. The blood flow changes were detected using a laser Doppler flow meter, the percentage of the cerebral infarction volume was measured by means of the triphenyl tetrazolium chloride (TTC) staining, the effect of retigabine on the permeability of the blood-brain barrier after cerebral ischemia-reperfusion was examined via Evans blue (EB) staining, and the state of tight junctions between endothelial cells was determined via the transmission electron microscopy (TEM) technique. Immunohistochemistry was used to detect the effects of retigabine on the distribution and expressions of tight junction-associated proteins in the cerebral ischemia-reperfusion blood-brain barrier. Western blotting was adopted to examine the changes in the expressions of related proteins in cerebral ischemia-reperfusion tissues., Results: At 48 h and 96 h after cerebral ischemia-reperfusion, retigabine notably reduced the cerebral infarction volume of rats, and the tight junctions between microvascular endothelial cells in the ischemic area opened up, the permeability of the blood-brain barrier was remarkably increased, and the permeability of the blood-brain barrier was significantly reduced under the action of retigabine. The expressions of claudin-5, occludin, and ZO-1 in the blood-brain barrier of the ischemic brain tissue significantly declined, and retigabine notably increased the expressions of three proteins and their distributions along the microvessels. At 3 h, 24 h, 48 h, and 96 h after cerebral ischemia-reperfusion, the expressions of the MMP-2 protein and MMP-9 protein in the ischemic brain tissue were evidently increased, which were inhibited by retigabine. Moreover, the expressions of the PKCδ protein in the ischemic brain tissue were markedly increased, which were significantly inhibited by retigabine., Conclusions: The regulatory roles of retigabine in the distribution and expressions of claudin-5, occludin, and ZO-1 may be associated with the inhibition of the expressions of the MMP-2, MMP-9, and PKCδ proteins.

Thiram, a carbamate pesticide, is known to induce tibial dyschondroplasia (TD) in broiler chickens. This study used a thiram-induced TD model to explore whether apoptosis-related genes were expressed in erythrocytes of broiler chickens and the impacts of thiram-induced TD and the recombinant GSTA3 protein in regulating these genes expression. In this study, mRNA and protein expression of six types of apoptosis-related genes (Bcl-2, Bax, Murine double minute MDM2, Bcl-2-associated athanogene BAG-1, BAG-3, STAT3) were identified in erythrocytes of broiler chickens by real-time PCR and immunohistochemistry, and we also found that thiram-induced TD induced the decreased expression of these antiapoptotic genes in the initial stage of TD and promoted their expression in TD recovery, which suggested that the expression of these apoptosis-related genes in erythrocytes is highly related to the development of TD. Further, the recombinant GSTA3 protein promoted the expression of all apoptosis-related genes in the initial stage of TD and recovered the normal expression of these genes in the recovery stage of TD, which indicated that the recombinant GSTA3 protein may participate in the recovery of TD. Further studies are needed to elucidate the mechanism of the response of erythrocytes to thiram-induced TD and the recombinant protein GSTA3 in broiler chickens., (Copyright © 2018. Published by Elsevier Ltd.)

Facial symmetry is a crucial component of human facial esthetics. Along with the increasing pursuit of aesthetic, in recent years, more and more researchers have focused on facial asymmetry assessment, of which determining the facial median sagittal plane is the first and most important step, and it will directly affect the accuracy of asymmetry evaluation and clinical treatment outcome. Limited by technical means, the earlier studies of facial soft tissue asymmetry assessment were mainly based on midline from two-dimensional (2D) images. Along with the development of three-dimensional (3D) measurement and data analysis techniques, new methods such as 3D landmark-based method and mirror-original alignment method have become main trend nowadays. This article systematically reviews the methods of determination of median sagittal plane of facial soft tissue, elaborates the developments and the latest research progress in this field, and discusses the advantages and limitations of each method in order to provide reference for clinical application.

Objective: To investigate effects of benzo(a)pyrene (BaP) on expressions of insulin-degrading enzyme (IDE) and neprilysin (NEP) which have the ability to degrade β-amyloid (Aβ) in neuroglia cells., Methods: Primary mix-neuroglia cells were cultured from newborn SD rats. After exposure to BaP, Aβ 1-42 oligomer or Aβ 1-42 fiber individually or jointly for 24 h, the cell survival rate was measured by cell counting kit-8 (CCK-8). Afterwards, the primary mix-neuroglia cells were divided randomly into six groups: Control group, BaP group (2.00 μmol/L), Aβ 1-42 oligomer group (20.00 mg/L), BaP plus Aβ 1-42 oligomer group, Aβ 1-42 fiber group (20.00 mg/L) and BaP plus Aβ 1-42 fiber group, of which BaP was pretreated for 12 h followed by cotreatment with different aggregated Aβ 1-42 . The expressions of IDE and NEP were measured by quantitative real-time polymerase chain reaction (qRT-PCR) for mRNA level and Western blotting for protein level., Results: The cell survival rate showed no significant differences after treatment with BaP (≤20.00 μmol/L), Aβ 1-42 oligomer (20.00, 40.00 mg/L), Aβ 1-42 fiber (20.00, 40.00 mg/L) or cotreatment with BaP and Aβ 1-42 oligomer or BaP and Aβ 1-42 fiber. Compared with the control group, expressions of IDE and NEP in BaP-treated alone group had no obvious change; however, exposure to Aβ 1-42 oligomer alone significantly increased the mRNA and protein level of IDE (P<0.05), and the BaP pretreatment could significantly inhibit the up-regulated expressions of IDE by Aβ 1-42 oligomer (P<0.05); on the other hand, exposure either to Aβ 1-42 fiber alone or under the BaP pretreatment did not change the mRNA and protein level of IDE and NEP obviously., Conclusion: On the premise of no significant change of cell survival rate, BaP pretreatment inhibited the up-regulated expressions of IDE in primary mixed neuroglia cells under cotreatment with Aβ oligomer, indicating that BaP may disturb degradation of Aβ oligomer and cause deposition of β-amyloid and further induce cognitive decline and acceleration of Alzheimer.

Competing Interests: The authors of this article and the planning committee members and staff have no relevant financial relationships with commercial interests to disclose.

Objective: To know the incidence of heat stroke and explore it's prediction model in Pudong New Area of Shanghai. Methods: An epidemiological investigation was conducted on heat stroke cases in Pudong New Area of Shanghai from 2013 to 2017. Daily temperature data during this period were collected to explore it's influence. Results: 246 heat stroke cases were reported and investigated, 70.3% (173/246) of them were male. 170 cases are severe heat stroke, accounting for 69.1%. 28 patients died, accounting for 11.4% of all cases of heat stroke, and 16.5% (28/170) of severe heat stroke cases. Thermoplegia (56.5%, 96/170) was the most popular type among severe heat stroke cases. Heat prostration, heat cramps and mixed type account for 17.1% (29/170) , 12.4% (21/170) and 14.0% (24/170) respectively. Scatter plot and linear regression demonstrated that there was a significant linear relation between number of high temperature days and number of heat stroke cases ( P <0.01) . And the prediction model is: Predictive number of annual heat stroke cases=β×Number of annual high temperature days+Intercept. Leave-one-out cross validation result shows that the predictive number of annual heat stroke cases from 2013 to 2017 were 85.7%, 90.9%, 83.3%, 91.9 and 84.3% respectively. Conclusion: There was a significant linear relation between number of high temperature days and number of heat stroke cases in Pudong New Area. The related work arrangement for heat stroke prevention could be well planed according to the prediction model.

In recent years with the rapid development of digital technology for stomatology, the application field, application model, technical features and technical connotation of the chair-side digital technology has got development and change. The open modular system has gradually replaced the traditional closed system, and the application field of digital technology is no longer limited to chair-side dental restoration, it also has been extend to various kinds of chair-side digital treatment-assisted technology. In this paper, from the engineering point of view, the up to date general connotation of chair-side digital technology was explained, the characteristics and the development of each unit in chair-side digital technology were analyzed, and the application pattern and the localization status were also discussed in this paper. The aim of this paper was to introduce the trend of chair-side digital technological to readers and to better guide clinical application.

Objective: To explore the accuracy of periapical film in evaluating the infrabone root surface area of single-root teeth with different types of resorption of the alveolar bone., Methods: In this study, the medical records and imaging data of patients in Department of Periodontology of Peking University Hospital of Stomatology from January 2014 to December 2016 were retrospectively analysed. The involved teeth were divided into two groups: horizontal bone loss group and vertical bone loss group. Digital three-dimensional models of teeth were segmented from cone beam computed tomography (CBCT) data, and the percentage of the infrabone root surface area was measured. While the percentage of the residual alveolar bone was measured on the periapical films. The correlation of the two percentages were analyzed, and the differences between the two percentages of each group were compared., Results: Thirty-two patients and 79 single-root teeth were involved totally, in whom there were 25 men and 7 women, aged 26-60 years, and of which there were 41 teeth in the horizontal bone loss group and 38 teeth in the vertical bone loss group. The remaining alveolar bone height percentages were 45.13%-90.39% on the periapical films, and at the same time, the infrabone root surface area percentages were 36.27%-93.03% on CBCT. The residual alveolar bone height percentage of the horizontal bone loss group was not subject to normal distribution, so the residual alveolar bone height percentage and the infrabone root surface area percentage were analyzed by Wilcoxon matched pair rank test (P=0.382), and the result showed no statistically significant difference. The mean value of difference value of the two measurements was 0, and the consistency limit of 95 % was -9.7%-9.8%, between the clinical consistency limit (-15%-15%).The residual alveolar bone height percentage and the infrabone root surface area percentage of the vertical bone loss group were analyzed by paired T test (P< 0.001), and the result showed statistically significant difference. The mean value of difference value of the two measurements was 7.2 %, and the consistency limit of 95% was -13.1%-27.5%, beyond clinical consistency limit (-15%-15%)., Conclusion: For the teeth with horizontal bone loss, the proximal residual alveo-lar bone height reflected on the periapical films could show the infrabone root surface area relatively accurately. For the teeth with vertical bone loss, the periapical films could not show the degree of periodontal tissue loss accurately, and it would underestimate the extent of bone destruction usually, so CBCT might be taken to show the bone destruction condition of this type of teeth if necessary.

Objective: To develop a digital workflow of orthodontic-prosthodontic multidisciplinary treatment plan which can be applied in complicated anterior teeth esthetic rehabilitation, in order to enhance the efficiency of communication between dentists and patients, and improve the predictability of treatment outcome., Methods: Twenty patients with the potential needs of orthodontic-prosthodontic multidisciplinary treatment to solve their complicated esthetic problems in anterior teeth were recruited in this study. Digital models of patients' both dental arches and soft tissues were captured using intra oral scanner. Direct prosthodontic (DP) treatment plan and orthodontic-prosthodontic (OP) treatment plan were carried out for each patient. For DP treatment plans, digital wax-up models were directly designed on original digital models using prosthodontic design system. For OP treatment plans, virtual-setups were performed using orthodontic analyze system according to orthodontic and esthetic criteria and imported to prosthodontic design system to finalize the digital wax-up models. These two treatment plans were shown to the patients and demonstrated elaborately. Each patient rated two treatment plans using visual analogue scales and the medians of scores of two treatment plans were analyzed using signed Wilcoxon test. Having taken into consideration various related factors, including time, costs of treatment, each patient chose a specific treatment plan. For the patients chose DP treatment plans, digital wax-up models were exported and printed into resin diagnostic models which would be utilized in the prosthodontic treatment process. For the patients chose OP treatment plans, virtual-setups were used to fabricate aligners or indirect bonding templates and digital wax-up models were also exported and printed into resin diagnostic models for prosthodontic treatment after orthodontic treatment completed., Results: The medians of scores of DP treatment plan and OP treatment plan were calculated and analyzed by IBM SPSS 20. The median of scores of DP treatment plan was 8.4, the minimum value was 6.9 and the maximum value was 9.3. The median of scores of OP treatment plan was 9.0, the minimum value was 7.9 and the maximum value was 9.6. The median of scores of OP was significantly higher than that of DP (Z=-3.23, P<0.01). Finally, 12 patients chose OP treatment plans and 8 patients chose DP treatment plans., Conclusion: For cases with complex esthetic problems in anterior teeth, a digital workflow can demonstrate final treatment outcome and help patients make suitable treatment decisions. In our study, the orthodontic-prosthodontic multidisciplinary treatment plan is feasible which can provide predictions of treatment outcome and improve esthetic outcome with patients' satisfaction.

Background: We previously developed an animal model to examine mechanisms that underlie the emergence of visceral hypersensitivity modeling pain characteristics of temporomandibular disorder (TMD) patients with comorbid irritable bowel syndrome (IBS). In ovariectomized (OVx) rats with estradiol (E2) replacement, visceral hypersensitivity developed subsequent to masseter muscle inflammation followed by repeated forced swim (FS) stress. The purpose of this study was to investigate whether activation of extracellular signal-regulated kinase (ERK) in the spinal cord contributes to visceral hypersensitivity in this overlapping pain model., Methods: In OVx with E2 replacement rats masseter muscle inflammation was followed by 3 day FS (comorbid condition). Depression-like behaviors were assessed by sucrose preference and in the elevated plus maze, and visceral sensitivity was measured by the visceromotor response (VMR) to colorectal distention. The protein level of ERK1/2 and phosphorylated ERK1/2 (p-ERK1/2) in the L6-S2 dorsal spinal cord was analyzed by western blot., Key Results: FS stress decreased sucrose consumption in E2 replaced rats in sucrose preference test. The expression of p-ERK1/2 in the L6-S2 dorsal spinal cord increased significantly in E2 with comorbid rats. Intrathecal injection of mitogen-activated protein kinase (MAPK) kinase (MEK) inhibitor PD98059 blocked the visceral hypersensitivity induced by masseter muscle inflammation combined with FS stress., Conclusions & Inferences: These data indicate that ERK1/2 activation contributes to the visceral hypersensitivity evoked by craniofacial inflammation pain combined with stress. The results may provide a new therapeutic avenue for alleviating overlapping pain conditions., (© 2017 John Wiley & Sons Ltd.)

We propose a mechanism of ground-state antiblockade of Rydberg atoms, which is then exploited to prepare two-atom entangled state via three different kinds of pulses. First we use the pulses in the form of sin 2 and cos 2 functions and obtain a maximally entangled state at an accurate interaction time. Then the method of stimulated Raman adiabatic passage (STIRAP) is adopted for the entanglement generation, which is immune to the fluctuations of revelent parameters but requires a long time. Finally we capitalize the advantages of the former two methods and employ shortcuts to adiabatic passage (STAP) to generate the maximal entanglement. The strictly numerical simulation reveals that the current scheme is robust against spontaneous emission of atoms due to the virtual excitation of Rydberg states, and all of the above methods favor a high fidelity with the present experimental technology.

Objective: To explore a three-dimensional (3D) data fusion and integration method of optical scanning tooth crowns and cone beam CT (CBCT) reconstructing tooth roots for their natural transition in the 3D profile., Methods: One mild dental crowding case was chosen from orthodontics clinics with full denture. The CBCT data were acquired to reconstruct the dental model with tooth roots by Mimics 17.0 medical imaging software, and the optical impression was taken to obtain the dentition model with high precision physiological contour of crowns by Smart Optics dental scanner. The two models were doing 3D registration based on their common part of the crowns' shape in Geomagic Studio 2012 reverse engineering software. The model coordinate system was established by defining the occlusal plane. crown-gingiva boundary was extracted from optical scanning model manually, then crown-root boundary was generated by offsetting and projecting crown-gingiva boundary to the root model. After trimming the crown and root models, the 3D fusion model with physiological contour crown and nature root was formed by curvature continuity filling algorithm finally. In the study, 10 patients with dentition mild crowded from the oral clinics were followed up with this method to obtain 3D crown and root fusion models, and 10 high qualification doctors were invited to do subjective evaluation of these fusion models., Results: This study based on commercial software platform, preliminarily realized the 3D data fusion and integration method of optical scanning tooth crowns and CBCT tooth roots with a curvature continuous shape transition. The 10 patients' 3D crown and root fusion models were constructed successfully by the method, and the average score of the doctors' subjective evaluation for these 10 models was 8.6 points (0-10 points). which meant that all the fusion models could basically meet the need of the oral clinics, and also showed the method in our study was feasible and efficient in orthodontics study and clinics., Conclusion: The method of this study for 3D crown and root data fusion could obtain an integrate tooth or dental model more close to the nature shape. CBCT model calibration may probably improve the precision of the fusion model. The adaptation of this method for severe dentition crowding and micromaxillary deformity needs further research.

Objective: To quantitatively evaluate the adaptation of polylactic acid (PLA) pattern of mandibular complete denture fabricated by fused deposition modeling (FDM) technology. Methods: A mandibular complete denture digital model was designed through a complete denture design software based on a pair of standard maxillomandibular edentulous plaster model and their occlusion bases. Ten PLA mandibular complete dentures were printed with a FDM machine. The dentures were scanned with and without the plaster model using a three-dimensional (3D) scanner. In Geomagic software, the scanning data of printed dentures were registered to its computer aided design (CAD) data, and the printing error was analyzed using the multipoint registration command. For quantitatively evaluating the adaptation of the denture, the data of plaster model and PLA denture were registered to the whole data of denture located in the plaster model using the best-fit alignment command, the 3D deviation of the plaster model and tissue surface of the denture represent the space between them. The overall area was separated into three parts: primary stress-bearing area, secondary stress-bearing area and border seal area, and the average deviations of these three parts were measured. The values were analyzed using analysis of variance. Results: Compared with the CAD data, the printing error was (0.013±0.004) mm. The overall 3D deviation between PLA denture and plaster model was (0.164±0.033) mm, in which the primary stress-bearing area was (0.165± 0.045) mm, the secondary stress-bearing area was (0.153 ± 0.027) mm, the border seal area was (0.186 ± 0.043) mm. These showed a good fit in the majority parts of the FDM denture to the plaster model. No statistically significant difference was observed between the three areas ( F =1.857, P =0.175>0.05). Conclusions: Combined with the 3D scanning, CAD and FDM technology, a FDM 3D printing process of complete denture for injection moulding can be established. As a result, high efficiency and low cost can be used to print out the complete denture, to lay the basis for further clinical applications.

School bullying and campus violence is a widespread social problem in the world. School bullying is characterized by its repeatability and suddenness, which could make the victims suffering from both psychological and health damage, and even affect their personality growth. Government should pay close attention to the reduction and control of school bullying and campus violence by establishing school bullying emergency response system and preparedness plan. The school and teacher's role and legal responsibility in the service and management in schools should be cleared and defined. It is necessary to help teachers conduct early detection and intervention for school bullying, conduct morality, mental health and legal educations in students to teach them to act according to the law and protect themselves according to the law and help them identify and avoid risks, encourage the establishment of rescue facility and web of anti-school bullying by non-government organizations, and set hotline for school bullying incident to reduce the incidence of school bullying.

Objective: To explore a new method for rapid extracting and rebuilding three-dimensional (3D) digital root model of vivo tooth from cone beam computed tomography (CBCT) data based on the anatomical characteristics of periodontal ligament, and to evaluate the extraction accuracy of the method., Methods: In the study, 15 extracted teeth (11 with single root, 4 with double roots) were collected from oral clinic and 3D digital root models of each tooth were obtained by 3D dental scanner with a high accuracy 0.02 mm in STL format. CBCT data for each patient were acquired before tooth extraction, DICOM data with a voxel size 0.3 mm were input to Mimics 18.0 software. Segmentation, Morphology operations, Boolean operations and Smart expanded function in Mimics software were used to edit teeth, bone and periodontal ligament threshold mask, and root threshold mask were automatically acquired after a series of mask operations. 3D digital root models were extracted in STL format finally. 3D morphology deviation between the extracted root models and corresponding vivo root models were compared in Geomagic Studio 2012 software. The 3D size errors in long axis, bucco-lingual direction and mesio-distal direction were also calculated., Results: The average value of the 3D morphology deviation for 15 roots by calculating Root Mean Square (RMS) value was 0.22 mm, the average size errors in the mesio-distal direction, the bucco-lingual direction and the long axis were 0.46 mm, 0.36 mm and -0.68 mm separately. The average time of this new method for extracting single root was about 2-3 min. It could meet the accuracy requirement of the root 3D reconstruction fororal clinical use., Conclusion: This study established a new method for rapid extracting 3D root model of vivo tooth from CBCT data. It could simplify the traditional manual operation and improve the efficiency and automation of single root extraction. The strategy of this method for complete dentition extraction needs further research.

The mechanism of dominant follicle selection is unclear because of its physiological complexity. However, some studies have reported that the immune system plays an important role in reproductive physiology. The objective of the current study was to investigate the differential expression of Toll-like receptors (TLRs) in the dominant (DFs) and nondominant follicles (NFs), and to determine the correlation between the expression of TLRs and the related genes, such as WNT4 and FOXL2. In this comparative study, the expression levels of TLRs, WNT4, and FOXL2 genes of DFs and NFs were obtained from three Dazu black goats were estimated using the real-time PCR. Our results showed no significant difference in the expression of seven TLRs (excluding TLR2, TLR5, and TLR8), WNT4, and FOXL2 between the DFs and NFs. In addition, the mRNA expression levels of WNT4 significantly correlated with the relative expression of TLR6 (r = 0.949739, P < 0.01); however, no significant expression of the TLR genes was found to be associated with FOXL2 mRNA expression. Our results support the fact that TLRs are not involved in the process of dominant follicle selection; however, TLR6 might play a role in the development of follicles by interacting with WNT4.

Transcriptome analysis of Inner Mongolia Cashmere goat and Dazu black goat generated 38,772,947 and 38,771,668 clean pair end reads, respectively, which were assembled into 72,422 and 80,069 unigenes by Trinity, respectively. For Inner Mongolia Cashmere goat, 26,051 and 10,100 unigenes were assigned to gene ontology (GO) categories and clusters of orthologous groups, respectively. A total of 32,772 unigenes can comment to SWISS-Prot database, and the Kyoto Encyclopedia of Genes and Genomes Pathway database (KEGG) mapped 24,420 unigenes. While annotating the unigenes about Dazu black goats, we found 29,444(45.42%), 11,271 (38.28%), 36,910(56.94%) and 27,766 (42.83%) unigenes were assigned to GO database, COG database, SWISS-Prot database and KEGG database, respectively. In addition, we performed the bioinformatics analysis of gene expression profiling aimed at the ovarian transcriptome difference between Inner Mongolia Cashmere goat and Dazu black goat. We obtained a sequencing depth of over 5.5 million and 5.8 million tags. There were 1,133 DEGs between two species, of which 632 genes upregulated in the Dazu black goat and 501 genes downregulated compared with which in Inner Mongolia Cashmere goat. By annotating the 1,133 DEGs into KEGG database, we found 525 DEGs. And there were 68 DEGs annotated in metabolic pathways, 31 DEGs annotated in ribosome, 28 DEGs annotated in focal adhesion, 27 DEGs annotated in phagosome, 26 DEGs annotated in pathways in cancer, 25 DEGs annotated in ECM-receptor interaction, 23 DEGs annotated in protein digestion and absorption, 20 DEGs annotated in oxidative phosphorylation, 17 DEGs annotated in lysosome, and 16 DEGs annotated in cell adhesion molecules., (© 2016 Blackwell Verlag GmbH.)

Inflammation plays an important role in cerebral ischemia reperfusion, which can cause severe damage to the brain and may lead to cerebral hemorrhage transformation. p38-mitogen-activated protein kinase (p38mapk) has been implicated in the etiology of a number of diseases because it is a cause of inflammation, but comparatively little research has been carried out into its role in the etiology of ischemia reperfusion. We investigated the expression of p38mapk in cerebral ischemia reperfusion to gain a better understanding of its potential role in hemorrhagic transformation (HT). One hundred rats were randomly divided into three groups: an ischemia reperfusion group, an ischemia group, and a sham-operated group. We carried out neurological deficit assessments, infarct volume measurements, histopathological examinations, and immunohistochemistry analyses. p38mapk was overexpressed in the ischemia reperfusion group, which exhibited severe tissue damage and greater edema than the other two groups. These results suggest that p38mapk plays an important role in cerebral ischemia reperfusion, and may be one of the causes of HT., Competing Interests: The authors declare no conflict of interest.

Objective: To quantitatively evaluate the quality and accuracy of three-dimensional (3D) data acquired by using two kinds of structure intra-oral scanner to scan the typical teeth crown preparations., Methods: Eight typical teeth crown preparations model were scanned 3 times with two kinds of structured light intra-oral scanner(A, B), as test group. A high precision model scanner were used to scan the model as true value group. The data above the cervical margin was extracted. The indexes of quality including non-manifold edges, the self-intersections, highly-creased edges, spikes, small components, small tunnels, small holes and the anount of triangles were measured with the tool of mesh doctor in Geomagic studio 2012. The scanned data of test group were aligned to the data of true value group. 3D deviations of the test group compared with true value group were measured for each scanned point, each preparation and each group. Independent-samples Mann-Whitney U test was applied to analyze 3D deviations for each scanned point of A and B group. Correlation analysis was applied to index values and 3D deviation values., Results: The total number of spikes in A group was 96, and that in B group and true value group were 5 and 0 respectively. Trueness: A group 8.0 (8.3) μm, B group 9.5 (11.5) μm(P>0.05). Correlation analysis of the number of spikes with data precision of A group was r=0.46., Conclusions: In the study, the qulity of the scanner B is better than scanner A, the difference of accuracy is not statistically significant. There is correlation between quality and data precision of the data scanned with scanner A.

There is growing evidence that vitamin D (VitD) plays a role in the pathophysiological mechanism of every patient undergoing hemodialysis, and this role is significantly altered in a microinflammatory state. However, it is unclear whether supplementation dosage or route of administration should be altered due to this state. Thus, the objective of our mini review and meta-analysis was to re-consider supplementation of VitD in HD patients exhibiting micro-inflammatory state. Pubmed, Web of Science and Google Scholar were searched up to January 19, 2016. We included studies that evaluated supplementation in HD patients with micro-inflammatory state. One reviewer extracted data and one reviewer verified the data accuracy. We qualitatively summarized the main results and meta-analyzed data on comparable outcomes across studies. The main outcome measures were serum levels of VitD. Ten eligible studies were published between 2002 and 2016, involving a total 1,239 patients. Average vintage of hemodialysis was 35.36 (±31.08) months. We identified a high degree of clinical diversity (interventions and outcomes) and methodological heterogeneity (sample size and risk of bias) in included trials. The studies we reviewed provide some weak evidence to support VitD supplementation in patients on hemodialysis exhibiting micro-inflammatory state. We recommend that future trials focus on our main outcome measures (that is variable comparable across studies).

Objectives: To investigate the potentiation effect of Genipin to Cisplatin induced cell senescence in HCT-116 colon cancer cells in vitro., Methods: Cell viability was estimated by Propidium iodide and Hoechst 3342, reactive oxygen species (ROS) with DHE, mitochondrial membrane potential (MMP) with JC-1 MMP assay Kit and electron current production with microbial fuel cells (MFC)., Results: Genipin inhibited the UCP2 mediated anti-oxidative proton leak significantly promoted the Cisplatin induced ROS and subsequent cell death, which was similar to that of UCP2-siRNA. Cells treated with Cisplatin alone or combined with Genipin, ROS negatively, while MMP positively correlated with cell viability. Cisplatin induced ROS was significantly decreased by detouring electrons to MFC, or increased by Genipin combined treatment. Compensatory effects of UCP2 up-regulation with time against Genipin treatment were suggested. Shorter the Genipin treatment before Cisplatin better promoted the Cisplatin induced ROS and subsequent cell death., Conclusion: The interaction of leaked electron with Cisplatin was important during ROS generation. Inhibition of UCP2-mediated proton leak with Genipin potentiated the cytotoxicity of Cisplatin. Owing to the compensatory effects against Genipin, shorter Genipin treatment before Cisplatin was recommended in order to achieve better potentiation effect.

Deep RNA sequencing (RNA-seq) provides a practical and inexpensive alternative for exploring genomic data in non-model organisms. The functional annotation of non-model mammalian genomes, such as that of goats, is still poor compared to that of humans and mice. In the current study, we performed a whole transcriptome analysis of an intestinal mucous membrane lymph node to comprehensively characterize the transcript catalogue of this tissue in a goat. Using an Illumina HiSeq 4000 sequencing platform, 9.692 GB of raw reads were acquired. A total of 57,526 lymph transcripts were obtained, and the majority of these were mapped to known transcriptional units (42.67%). A comparison of the mRNA expression of the mesenteric lymph nodes during the juvenile and post-adolescent stages revealed 8949 transcripts that were differentially expressed, including 6174 known genes. In addition, we functionally classified these transcripts using Gene Ontology (GO) and the Kyoto Encyclopedia of Genes and Genomes (KEGG) terms. A total of 6174 known genes were assigned to 64 GO terms, and 3782 genes were assigned to 303 KEGG pathways, including some related to immunity. Our results reveal the complex transcriptome profile of the lymph node and suggest that the immune system is immature in the mesenteric lymph nodes of juvenile goats.

Objective: To compare the accuracyof interactive closet point (ICP) algorithm, Procrustes analysis (PA) algorithm,and a landmark-independent method to construct the mid-sagittal plane (MSP) of the cone beam computed tomography.To provide theoretical basis for establishing coordinate systemof CBCT images and symmetric analysis., Methods: Ten patients were selected and scanned by CBCT before orthodontic treatment.The scan data was imported into Mimics 10.0 to reconstructthree dimensional skulls.And the MSP of each skull was generated by ICP algorithm, PA algorithm and landmark-independent method. MSP extracted by ICP algorithm or PA algorithm involvedthree steps. First, the 3D skull processing was performed by reverse engineering software geomagic studio 2012 to obtain the mirror skull. Then, the original and its mirror skull was registered separately by ICP algorithm in geomagic studio 2012 and PA algorithm in NX Imageware 11.0. Finally, the registered data were united into new data to calculate the MSP of the originaldata in geomagic studio 2012. The mid-sagittal plane was determined by SELLA (S), nasion (N), basion (Ba) as traditional landmark-dependent methodconducted in software InVivoDental 5.0. The distance from 9 pairs of symmetric anatomical marked points to three sagittal plane were measured and calculated to compare the differences of the absolute value. The one-way ANOVA test was used to analyze the variable differences among the 3 MSPs. The pairwise comparison was performed with LSD method., Results: MSPs calculated by the three methods were available for clinic analysis, which could be concluded from the front view.However, there was significant differences among the distances from the 9 pairs of symmetric anatomical marked points to the MSPs (F=10.932,P=0.001).LSD test showed there was no significant difference between the ICP algorithm and landmark-independent method (P=0.11), while there was significant difference between the PA algorithm and landmark-independent methods (P=0.01) ., Conclusion: Mid-sagittal plane of 3D skulls could be generated base on ICP algorithm or PA algorithm. There was no significant difference between the ICP algorithm and landmark-independent method. For the subjects with no evident asymmetry, ICP algorithm is feasible in clinical analysis.

Objective: To investigate the image features, categories, and clinical significances of Pneumoconiosis Ш with large shadow., Methods: The research is based on the analysis of image features of 168 pneumoconiosis Ш patients who are directly diagnosed by qualified medical professionals in our institution. These image features are large shadows bigger than 2 cm×1 cm which can be observed by high kilovolt chest radiographs, DR chest radiography and chest CT scan., Results: Large shadows bigger than 2×1 cm show noticeable imaging characteristics, like distribution of superior and middle lung regions (95.2%) , irregular shapes (97.6%) , splayed or sausage like changes on both sides perpendicular with ribs (89.2%) , small shadows of pneumoconiosis (98.8%) , and convergence of large shadow to hilum or mediastinal (53.6%). CT scan is significantly better than DR radiography on detection rate of focal emphysema, focal cavities and swollen lymph node of mediastinal., Conclusion: Combining the image features of high kilovolt chest radiographs, DR chest radiographs and CT scan are the main methods to identify the shadows, and thus direct diagnose pneumoconiosis Ш; CT scan plays an important role in differential diagnosis.

Desmoglein 4 (DSG4) has an important role in the development of wool traits in domestic animals. The full-length DSG4 gene, which contains 3918 bp, a complete open-reading-frame, and encodes a 1040-amino acid protein, was amplified from Liaoning cashmere goat. The sequence was compared with that of DSG4 from other animals and the results show that the DSG4 coding region is consistent with interspecies conservation. Thirteen single-nucleotide polymorphisms (SNPs) were identified in a highly variable region of DSG4, and one SNP (M-1, G>T) was significantly correlated with white and black coat color in goat. Haplotype distribution of the highly variable region of DSG4 was assessed in 179 individuals from seven goat breeds to investigate its association with coat color and its differentiation among populations. However, the lack of a signature result indicates DGS4 haplotypes related with the color of goat coat.