Search

Prevention of icing flashover on transmission lines has become an important problem. A new method for mitigating effects of glaze ice on energized insulators has been developed. Semiconductive silicone rubber was painted on the bottom of suspension disc insulators, while the upper ceramic surface was untreated. An electrically conductive path was formed when supercooled water or droplets bridged the uncoated areas. The power loss was limited when there was no precipitation. The heat and partial discharge energy generated by the leakage current melted the original ice accretion on the insulator surface. The electrical performance of the insulator string with this kind of coating under freezing rain conditions was comparable with that of a clean insulator string. The impact of the ambient temperature on the anti-icing performance was also evaluated. In addition, the performance of the insulator with bottom surface semiconductive coating under fog conditions was compared with an uncoated string. [ABSTRACT FROM PUBLISHER]

• OGW Damage result from existing model is milder than that in natural lightning. • There is at least 45% of energy difference between model and natural lightning. • Contribution of Joule heat to the injected energy is almost negligible for OGW. Acquisition and analysis of the thermal damage and injected energy data of the natural lightning strikes are conducive to understand the lightning-induced damage mechanism of OGW (Overhead Ground Wire) as well as guide the improvement of the lightning simulation experimental methods in the laboratory. In this paper, a rupture accident of OGW in the power grid, which was taken as a natural lightning strike damage experiment, was used to compare the thermal damage and the injected energy with the existing common Joule heat & arc heat transfer model. The results indicated that the thermal damage of the common model is milder than that of natural lighting strike. In this accident, at least more than 45% of the injected natural lightning energy was not sourced when adopting the existing common model to simulate the thermal damage of OGW, even after considering the electrons enthalpy flux that is usually neglected in calculation. [Display omitted] [ABSTRACT FROM AUTHOR]

It is essential to understand to what extent the protected edge states of topological insulators (TIs) can survive against the degradation of the ubiquitous disorders in realistic devices. From a different perspective, disorders can also help to enrich the applications by modulation of the phases in TIs. In this work, the phases and phase transitions in stanene, a two-dimensional TI, have been investigated via the statistical approach based on the random matrix theory. Using a tight binding model with Aderson disorder term and the Landauer-Büttiker formalism, we calculated the conductance of realistic stanene ribbons of tens of nanometers long with random disorders. The calculated phase diagram presents TI in the gap, metal in high energy and ordinary insulator in large disorder region. Increasing the width of the ribbon can significantly enhance the robustness of TI phase against disorders. Due to different underlying symmetries, the metallic phase can be further categorized into unitary and orthogonal classes according to the calculated universal conductance fluctuations. The local density of states is calculated, showing characteristic patterns, which can facilitate the experimental identification of the phases. It is found that different phases have distinguishing statistical distribution of conductance. Whereas at the phase boundary the distribution exhibits intermediate features to show where the phase transition occurs. To reveal the phase evolution process, we further studied the effects of the disorders on respective transmission channels. It is found that when phase transition takes place, the major transmission channels of the old phase are fading and the new channels of the new phase are emerging., (© 2024 IOP Publishing Ltd.)

Multifold degenerate phonons have received much attention due to their nontrivial monopole topological charge and fascinating boundary states. Although Yu et al recently provides a comprehensive list of all potential nodal points for systems with specific space groups (SGs) (2022 Sci. Bull. 67 375). However, our understanding of the fundamental mechanisms that give rise to the formation of fourfold-degenerate (FD) phonons is still limited. In this paper, we have directed our research towards investigating the generation mechanism of these FD phonons in noncentrosymmetric SGs. Using symmetry arguments andk⋅pmodel analysis, we have classified them into two categories: the first origins from the commutation/anticommutation relation of the little cogroup operations, and the second associates to the combination of threefold rotation, mirror and time-reversal symmetries. Moreover, the band dispersions of the FD phonons in the first group are required to be linear, whereas the band dispersions of the FD phonons in the second category may be quadratic. On the basis of first-principles calculations, we propose that K2Mg 2 O 3 and Na4SnSe 4 are representative candidates for the two categories, respectively. Furthermore, for each SG with fourfold degenerate phonons, we propose corresponding materials that must host the FD points. Our work not only deepens our understanding of the mechanisms underlying the formation of these FD phonons, but it also proposes practical materials for observing FD phonons in crystalline systems without inversion symmetry., (© 2024 IOP Publishing Ltd.)

In this study, the aging process of a surface-functional titanium dioxide nanosheet (f-TNS) composited room-temperature-vulcanized silicone rubber (RTV) composite coating was simulated in a NO 2 generation device, and then the electrochemical impedance spectroscopy (EIS) of the aged composite coating was tested in a 3.5% NaCl solution. The water permeation process was analyzed by the changes in the impedance modulus, porosity, and breakpoint frequency of the composite coating. The experimental results show that the water permeability of aged RTV decreases first and then increases with the increase in the composite proportion of f-TNS. When the composite proportion of TNS was 0.3 wt.%, the composite sample had the minimum water permeability and the best resistance to NO 2 corrosion. The effect of TNS on the NO 2 aging resistance of RTV composites and its mechanism were studied by SEM, FT-IR, and XPS. The impedance modulus and porosity of the aged 0.3% f-TNS/RTV, respectively, were 1.82 × 10 7 Ω cm 2 and 0.91 × 10 -4 %, which increased by 2.23 times and decreased by 0.37 times, respectively, compared with the values of aged pure RTV sample. In addition, the breakpoint frequency of the aged 0.3% f-TNS/RTV also significantly reduced to 11.3 Hz, whereas it was 35 Hz in aged pure RTV.

Background and Purpose: Existing studies have shown that circulating miRNA can be used as biomarkers of heart failure (HF). However, the circulating miRNA expression profile in Uyghur HF patients is unclear. In this study, we identified the miRNA profiles in the plasma of Uyghur HF patients and preliminarily explored their potential functions to provide new ideas for the diagnosis and treatment of HF., Methods: Totally, 33 Uyghur patients with HF with reduced ejection fraction (<40%) were included in the HF group and 18 Uyghur patients without HF were included in the control group. First, high-throughput sequencing was used to identify differentially expressed miRNAs in the plasma of heart failure patients (n = 3) and controls (n = 3). Second, the differentially expressed miRNAs were annotated with online software and bioinformatics analysis was used to explore the critical roles of these circulating miRNAs in HF. Moreover, four selected differentially expressed miRNAs were validated by quantitative real-time PCR (qRT-PCR) in 15 controls and 30 HF patients. The diagnostic value of three successfully validated miRNAs for heart failure was assessed using receiver operating characteristic curve (ROC) analysis. Finally, to explore the expression levels of the three successfully validated miRNAs in HF hearts, thoracic aortic constriction (TAC) mice models were constructed and their expression in mice hearts was detected by qRT-PCR., Results: Sixty-three differentially expressed miRNAs were identified by high-throughput sequencing. Of these 63 miRNAs, most were located on chromosome 14, and the OMIM database showed that 14 miRNAs were associated with HF. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analyses indicated that the target genes were mostly involved in ion or protein binding, the calcium signaling pathway, the mitogen-activated protein kinase (MAPK) signaling pathway, inositol phosphate metabolism, autophagy, and focal adhesion. Of the four selected miRNAs, hsa-miR-378d, hsa-miR-486-5p and hsa-miR-210-3p were successfully validated in the validation cohort and hsa-miR-210-3p had the highest diagnostic value for HF. Meanwhile, miR-210-3p was found to be significantly upregulated in the hearts of TAC mice., Conclusion: A reference set of potential miRNA biomarkers that may be involved in HF is constructed. Our study may provide new ideas for the diagnosis and treatment of HF., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: Myocardial fibrosis, as quantified by late gadolinium enhancement (LGE) in cardiac magnetic resonance (CMR), provides valuable prognostic information for patients with myocarditis. However, due to the low incidence rate of fulminant myocarditis (FM) and accordingly small sample size, the knowledge about the role of LGE to patients with FM is limited., Methods and Results: A total of 44 adults with viral-FM receiving the Chinese treating regimen were included in this retrospective study. They were divided into the low LGE group and the high LGE group according to the ratio of LGE to left ventricular mass (LGE mass%). CMR exams and LGE were performed after hemodynamic assistance at discharge in all patients with FM. Routine echocardiography parameters and global longitudinal strain (GLS) at discharge and at 2-year follow-up were obtained and then compared. Both left ventricular ejection fraction (LVEF) and GLS showed no significant difference in both groups at discharge, whereas significant differences were observed at 2-year follow-up between two groups. Moreover, there were significant improvements of LVEF and GLS in the low LGE group, but not in the high LGE group during the 2-year period. Furthermore, LGE mass% was negatively correlated with GLS and LVEF., Conclusions: There were two distinct forms of LGE presentation in patients with FM. Moreover, the cardiac function of patients with low LGE was significantly better than those with high LGE at 2-year follow-up. LGE mass% at discharge provided significant prognosis information about cardiac function of patients with FM., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (© 2023 Jiang, Zuo, Liu, Wang, Zhang, Zhang, Peng, Liu, Wang, Li and Wang.)

In this study, silicone rubber (SiR) with 0, 90, and 180 parts of aluminum hydroxide (Al(OH) 3 , ATH) contents prepared in the laboratory was treated in a certain concentration of NO 2 for 0, 12, 24, and 36 h. Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and thermogravimetry (TG) were used to study the changes in the surface structure and thermal stability of SiR, as well as the influence of Al(OH) 3 on the properties of SiR. According to AFM, the root-mean-square roughness of ATH-90 SiR was 192 nm, which was 2.7 times of ATH-0 SiR. With the incorporation of ATH, the surface of SiR became more susceptible to corrosion by NO 2 . According to FT-IR and XPS, with the increase in aging time, the side chain Si-CH 3 of polydimethylsiloxane (PDMS) was oxidized gradually and a few of nitroso -NO 2 groups were formed. According to TG, the incorporation of ATH caused the maximum decomposition rate temperature of PDMS to advance from 458.65 °C to 449.37 and 449.26 °C, which shows that the thermal stability of SiR degraded by adding ATH. After NO 2 aging, a new decomposition stage appeared between 75 and 220 °C (stage Ⅰ), and this decomposition trend was similar to aluminum nitrate, which was proven to reduce the thermal stability of PDMS. The effects of NO 2 on the surface structure and thermal stability of different ATH contents of silicone rubber were preliminarily clarified by a variety of characterization methods, which provided ideas for the development of silicone rubber resistant to NO 2 aging.

In this study, functional graphene oxide (f-GO) nanosheets were prepared to enhance the NO 2 resistibility of room-temperature-vulcanized (RTV) silicone rubber. A nitrogen dioxide (NO 2 ) accelerated aging experiment was designed to simulate the aging process of nitrogen oxide produced by corona discharge on a silicone rubber composite coating, and then electrochemical impedance spectroscopy (EIS) was used to test the process of conductive medium penetration into silicone rubber. After exposure to the same concentration (115 mg·L -1 ) of NO 2 for 24 h, at an optimal filler content of 0.3 wt.%, the impedance modulus of the composite silicone rubber sample was 1.8 × 10 7 Ω·cm 2 , which is an order of magnitude higher than that of pure RTV. In addition, with an increase in filler content, the porosity of the coating decreases. When the content of the nanosheet increases to 0.3 wt.%; the porosity reaches a minimum value 0.97 × 10 -4 %, which is 1/4 of the porosity of the pure RTV coating, indicating that this composite silicone rubber sample has the best resistance to NO 2 aging.

Silicone rubber is widely used as an insulating material. In this article, silicone rubber samples were prepared by varying the content of crosslinker (2,5-bis(tert-butyl-peroxy)-2,5-dimethylhexane, DBPMH), and the free volume holes in the samples were investigated by means of positron annihilation lifetime spectroscopy (PALS) measurement. The surface chemical structure, surface micromorphology and water diffusion of the samples after corona discharge treatment were studied by FTIR, SEM and EIS measurements, respectively. As the crosslinker weight ratio increased from 0.2 wt.% to 1.5 wt.%, the mean free volume hole size first decreased and then remained unchanged. However, the concentration of free volume holes did not vary as the crosslinker weight ratio increased. SEM morphologies show that surface cracks were produced on samples having high crosslinking levels after corona treatment. The water diffusion coefficient of samples after corona treatment increased from 3.13 × 10 -10 cm 2 s -1 to 17.68 × 10 -10 cm 2 s -1 in the initial immersion period, as the crosslinker weight ratio increased from 0.2 wt.% to 3.0 wt.%. The results indicated that deterioration of samples with high crosslinking levels were more serious and water repellency more easily lost. The corona resistance ability of low crosslinking level silicone rubber stems from internal low molecular weight molecules.

By performing first-principles calculations, we studied hexagonal-boron-nitride (hBN)-supported graphene, in which moiré structures are formed due to lattice mismatch or interlayer rotation. A series of graphene/hBN systems has been studied to reveal the evolution of properties with respect to different twisting angles (21.78°, 13.1°, 9.43°, 7.34°, 5.1°, and 3.48°). Although AA- and AB-stacked graphene/hBN are gapped at the Dirac point by about 50 meV, the energy gap of the moiré graphene/hBN, which is much more asymmetric, is only about several meV. Although the Dirac cone of graphene residing in the wide gap of hBN is not much affected, the calculated Fermi velocity is found to decrease with the increase in the moiré super lattice constant due to charge transfer. The periodic potential imposed by hBN modulated charge distributions in graphene, leading to the shift of graphene bands. In agreement with experiments, there are dips in the calculated density of states, which get closer and closer to the Fermi energy as the moiré lattice grows larger.

New Findings: What is the central question of this study? What is the mechanism of cardiac inflammation induced by α 1 -adrenoceptor stimulation by NLRP3 inflammasome activation? What is the main finding and its importance? In the mechanism of cardiac inflammation induced by α 1 -adrenoceptor overactivation, Kir2.1 exerts cardioprotective and anti-inflammatory effects by inhibiting the activation of the NLRP3 inflammasome., Abstract: Overstimulation of sympathetic nerves in cardiovascular diseases can lead to impaired cardiomyocyte function and potential heart failure, which activates not only the β-adrenoceptors but also the α 1 -adrenoceptors (α 1 -AR). A previous report indicated that NLRP3 inflammasome activation is involved in cardiac inflammation induced by the α 1 -AR agonist phenylephrine (PE), but the mechanism is still unknown. Here, we aimed to study whether Kir2.1 is involved in cardiac inflammation caused by PE. The results from in vitro experiments showed that PE upregulated the expression levels of NLRP3, caspase-1, interleukin (IL)-18 and IL-1β and downregulated the expression level of Kir2.1 in H9C2 cells. The Kir2.1 agonist zacopride downregulated the expression of NLRP3, caspase-1, IL-1β and IL-18, and the Kir2.1 inhibitor ML133 upregulated their expression. To further explore the mechanism, we found that zacopride downregulated the protein expression level of p-p65 and that ML133 upregulated it. Moreover, the nuclear factor-κB (NF-κB) signalling pathway inhibitor curcumenol reversed the expression of NLRP3 inflammasomes caused by PE in H9C2 cells. In in vivo experiments, the protein expression level of Kir2.1 in the PE group was significantly decreased, and the activation of Kir2.1 by zacopride reduced cardiac inflammation. In short, Kir2.1 is involved in α 1 -AR overactivation, which induces cardiac inflammation, through the NF-κB signalling pathway, and activating Kir2.1 can downregulate NLRP3 inflammation and exert cardioprotective effects induced by zacopride., (© 2022 The Authors. Experimental Physiology © 2022 The Physiological Society.)

An air pollution detector is proposed based on a tube-shaped single-electron transistor (SET) sensor. By monitoring the flow control component of the detector, each air pollutant molecule can be placed at the center of a SET nanopore and is treated as an island of the SET device in the same framework. Electron transport in the SET was incoherent, and the performances of the SET were sensitive at the single molecule level. Employing first-principles calculations, electronic features of an air pollutant molecule within a tube-shaped SET environment were found to be independent of the molecule rotational orientations with respect to axis of symmetry, unlike the electronic features in a conventional SET environment. Charge stability diagrams of the island molecules were demonstrated to be distinct for each molecule, and thus they can serve as electronic fingerprints for detection. Using the same setup, quantification of the air pollutant can be realized at room temperature as well. The results presented herein may help provide guidance for the identification and quantification of various types of air pollutants at the molecular level by treating the molecule as the island of the SET component in the proposed detector.

In this paper, gas chromatography-mass spectrometry (GC-MS) and positron annihilation lifetime spectroscopy (PALS) were used to probe the changes of oligomers and the polydimethylsiloxane (PDMS) network in silicone rubber, after different durations of UVA/UVB irradiation. At the early stage (<300 h) of UVA/UVB irradiation, the concentration of D4-D9 decreases. The o-Ps intensity of the extracted silicone rubber increases in the stage after UVB irradiation. These results indicate the crosslinking of oligomers into the PDMS network. After a long duration (>300 h) of UVB irradiation, D4 was generated and the lifetime of τ3 also increased, indicating the rupture of the Si-O bond in the PDMS network. These two aging processes were termed the post curing process and the chain session process. The new finding was that UVA could only induce the post curing process; UVB causes the rupture of the chemical bond in silicone rubber. Photons of UVB could break the C-H bond, and then trigger the backbiting decomposition of PDMS, breaking the Si-O bond, while the photons of UVA cannot. The fact that D4 was generated after UVB irradiation can be used to evaluate the UVB stability of silicone rubber in the future.

By performing first-principles calculations, we find that graphene with nearly zero spin orbit coupling can be turned into a topological insulator after being sandwiched between pnictogen bilayers. It is found that a dipole field is induced between graphene and pnictogen bilayers, which will significantly pull down the Dirac point of graphene. Depending on the initial position of the Dirac point of graphene with respect to the energy gap of the pnictogen bilayers, Bi/graphene/Bi is found to be a metallic system while Sb/graphene/Sb a topological insulator. In Sb/graphene/Sb, a sizable gap is opened at the Dirac point of graphene. The strong spin-orbit coupling in Sb bilayers leads to a band inversion in the gapped Dirac cones of graphene via the proximity effect and the calculated Z 2 topological index further confirms that a nontrivial topological phase is induced in graphene. By applying longitudinal or lateral strains to Sb/graphene/Sb, topological phase transition occurs based on the change of the thickness of the Sb bilayer instead of the change of the separation between graphene and Sb bilayers.