Search

As the commissioning phase of the Nagoya University Accelerator-driven Neutron Source for boron neutron capture therapy, in-phantom thermal neutron flux measurements were conducted using a small ⁶LiF/Eu:CaF₂ scintillator detector and activation foils. The spatial distribution of the measured thermal neutron flux agreed with the Monte Carlo simulation results. Based on this comparison, the free-in-air neutron spectrum, calculated at the exit aperture, was verified and the epithermal neutron flux, at a 0.25 mA proton current, was evaluated as (1.49 ± 0.10) × 10⁷ n/(cm 2 s)., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The energy-resolved neutron imaging system, RADEN, has been installed at the pulsed neutron source in the Materials and Life Science Experimental Facility of the Japan Proton Accelerator Research Complex. In addition to conventional neutron radiography and tomography, RADEN, the world's first imaging beam-line at a pulsed neutron source, provides three main options for new, quantitative neutron imaging techniques: Bragg-edge imaging to visualize the spatial distribution of crystallographic information, resonance absorption imaging for elemental composition and temperature information, and polarized neutron imaging for magnetic field information. This paper describes the results of characterization studies of the neutronic performance and installed devices at RADEN and shows the results of several demonstration studies for pulsed neutron imaging.

For the purpose of future visualization of the flow field in superfluid helium-4, clusters of the triplet state excimer 4 He 2 * are generated along the micro-scale recoil tracks of the neutron-absorption reaction n + 3 He → 3 T + p. This reaction is induced by neutron irradiation of the 3 He fraction contained in natural isotopic abundance liquid helium with neutron beams either from the Japan Proton Accelerator Research Complex, Materials and Life Science Experimental Facility (JPARC)/Materials and Life Science Experimental Facility or from the Kyoto University Institute for Integrated Radiation and Nuclear Science. These 4 He 2 * clusters are expected to be ideal tracers of the normal-fluid component in superfluid helium with several advantageous properties. Evidence of the excimer generation is inferred by detection of laser induced fluorescence emitted from the 4 He 2 * clusters excited by a purpose-built short pulse gain-switched titanium:sapphire (Ti:sa) laser operating at a wavelength of 905 nm. The setup and performance characteristics of the laser system including the Ti:sa and two continuous wave re-pumping lasers are described. Detection at the fluorescence wavelength of 640 nm is performed by using optical bandpass filtered photomultiplier tubes (PMT). Electrical noise in the PMT acquisition traces could successfully be suppressed by post-processing with a simple algorithm. Despite other laser-related backgrounds, the excimer was clearly identified by its fluorescence decay characteristics. Production of the excimer was found to be proportional to the neutron flux, adjusted via insertion of different collimators into the neutron beam. These observations suggest that the apparatus we constructed does function in the expected manner and, therefore, has the potential for groundbreaking turbulence research with superfluid helium.

The corneal endothelium maintains corneal transparency by its pump and barrier functions; consequently, its decompensation due to any pathological reason causes severe vision loss due to corneal haziness. Corneal transplantation is the only therapeutic choice for treating corneal endothelial dysfunction, but associated problems, such as a shortages of donor corneas, the difficulty of the surgical procedure, and graft failure, still need to be resolved. Regenerative medicine is attractive to researchers as a means of providing innovative therapies for corneal endothelial dysfunction, as it now does for other diseases. We previously demonstrated the successful regeneration of corneal endothelium in animal models by injecting cultured corneal endothelial cells (CECs) in combination with a Rho kinase (ROCK) inhibitor. The purpose of the present study was to optimize the vehicle for clinical use in cell-based therapy. Our screening of cell culture media revealed that RELAR medium promoted CEC adhesion. We then modified RELAR medium by removing hormones, growth factors, and potentially toxic materials to generate a cell therapy vehicle (CTV) composed of amino acid, salts, glucose, and vitamins. Injection of CECs in CTV enabled efficient engraftment and regeneration of the corneal endothelium in the rabbit corneal endothelial dysfunction model, with restoration of a transparent cornea. The CECs retained >85% viability after a 24 hour preservation as a cell suspension in CTV at 4°C and maintained their potency to regenerate the corneal endothelium in vivo. The vehicle developed here is clinically applicable for cell-based therapy aimed at treating the corneal endothelium. Our strategy involves the generation of vehicle from a culture medium appropriate for a given cell type by removing materials that are not favorable for clinical use.

Angular distributions of absorbed dose of Bremsstrahlung photons and secondary electrons at a wide range of emission angles from 0 to 135°, were experimentally obtained using an ion chamber with a 0.6 cm(3) air volume covered with or without a build-up cap. The Bremsstrahlung photons and electrons were produced by 18-, 28- and 38-MeV electron beams bombarding tungsten, copper, aluminium and carbon targets. The absorbed doses were also calculated from simulated photon and electron energy spectra by multiplying simulated response functions of the ion chambers, simulated with the MCNPX code. Calculated-to-experimental (C/E) dose ratios obtained are from 0.70 to 1.57 for high-Z targets of W and Cu, from 15 to 135° and the C/E range from 0.6 to 1.4 at 0°; however, the values of C/E for low-Z targets of Al and C are from 0.5 to 1.8 from 0 to 135°. Angular distributions at the forward angles decrease with increasing angles; on the other hand, the angular distributions at the backward angles depend on the target species. The dependences of absorbed doses on electron energy and target thickness were compared between the measured and simulated results. The attenuation profiles of absorbed doses of Bremsstrahlung beams at 0, 30 and 135° were also measured.

In the physical processes of proton interaction in bio-materials, most of the proton energy is transferred to electrons. Ionization and excitation occur most frequently around the Bragg peak region, where nuclear reactions also exist. In this study, we investigated the processes of energy deposition by considering interactions including the nuclear reactions between protons and water molecules by a Monte Carlo simulation for proton therapy. We estimated the number of particles produced by a variety of nuclear reactions, and we focused on the interaction in the low-energy region (below 1 MeV). Furthermore, we considered the charge-changing processes in the low-energy region (less than a few hundred keV). Finally, we evaluated the total dose and the contribution of primary protons and secondary particles through nuclear reactions to the absorbed dose. The results showed that the protons generate numerous neutrons via nuclear reactions. Particularly, neutrons with relatively low energies produce recoil protons by elastic collisions with the hydrogen atoms. Around the Bragg peak, low-energy primary protons (slowed-down protons) are prevalent, whereas recoil (secondary) protons gradually become dominant behind the distal falloff region of the Bragg peak. Therefore, around the Bragg peak, the main contribution to the absorbed dose is that of the primary protons (from 80 to 90%), whereas secondary protons created by primary proton-induced reactions contribute to the dose from 20 to 5%. Behind the distal endpoint of the Bragg peak, the absorbed dose is mainly due to the protons produced by (1)H(n, p), and the contribution of these is about 70%.