Search

A highly practical synthesis of enantiopure (--)-α-kainic acid is accomplished in 37% overall yield, using 13 linear steps and a minimum of chromatographic separations via an unprecedented TMSCl-promoted palladium-catalyzed zinc-ene cyclization of an allyl acetate. [ABSTRACT FROM AUTHOR]

The article investigates simple amino acid models to determine the viability of cross metathesis (CM) on protein surfaces. According to the authors, results have shown that allyl sulfides are effective substrates in aqueous CM through the use of catalyst 1. The authors were also able to post-translationally modify proteins via carbon-carbon bond formation.

The use of dissolving metal electrodes for the direct electrochemical synthesis of metal complexes has been used widely in the last decade. A major benefit of the electrochemical approach is the minimal by-products resulting from the synthesis. As such, metal complexes can be produced on-demand and used directly in catalysis without the need for purification. Furthermore, the electrochemical method enables the production of metal complexes that cannot be synthesized using other methods, including those with base-sensitive ligands. General principles of the electrochemical method and recent advances in the field are discussed., (© 2024 Wiley‐VCH GmbH.)

The modification of polymer surfaces using laser light is important for many applications in the nano-, bio- and chemical sciences. Such capabilities have supported advances in biomedical devices, electronics, information storage, microfluidics, and other applications. In most cases, these modifications require high power lasers that are expensive and require specialized equipment and facilities to minimize risk of hazardous radiation. Additionally, polymer systems that can be easily modified by lasers are often complex and costly to prepare. In this report, these challenges are addressed with the discovery of low-cost sulfur copolymers that can be rapidly modified with lasers emitting low-power infrared and visible light. The featured copolymers are made from elemental sulfur and either cyclopentadiene or dicyclopentadiene. Using a suite of lasers with discreet wavelengths (532, 638 and 786 nm) and powers, a variety of surface modifications could be made on the polymers such as controlled swelling or etching via ablation. The facile synthesis and laser modification of these polymer systems were exploited in applications such as direct laser lithography and erasable information storage., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

An electrochemical synthesis of gold(I)-N-heterocyclic carbene (Au-NHC) complexes has been developed. The electrochemical methodology uses only imidazolium salts, gold metal electrodes, and electricity to produce these complexes with hydrogen gas as the only by-product. This high-yielding and operationally simple procedure has been used to produce eight mononuclear and three dinuclear Au-NHC complexes. The electrochemical procedure facilitates a clean reaction with no by-products. As such, Au-NHC complexes can be directly transferred to catalytic reactions without work-up or purification. The Au-NHC complexes were produced on-demand and tested as catalysts in a vinylcyclopropanation reaction. All mononuclear Au-NHC complexes performed similarly to or better than the isolated complexes., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The ability to radiolabel proteins with [ 18 F]fluoride enables the use of positron emission tomography (PET) for the early detection, staging and diagnosis of disease. The direct fluorination of native proteins through C-F bond formation is, however, a difficult task. The aqueous environments required by proteins severely hampers fluorination yields while the dry, organic solvents that promote nucleophilic fluorination can denature proteins. To circumvent these issues, indirect fluorination methods making use of prosthetic groups that are first fluorinated and then conjugated to a protein have become commonplace. But, when it comes to the radiofluorination of proteins, these indirect methods are not always suited to the short half-life of the fluorine-18 radionuclide (110 min). This review explores radiofluorination through bond formation with fluoride at boron, metal complexes, silicon, phosphorus and sulfur. The potential for these techniques to be used for the direct, aqueous radiolabeling of proteins with [ 18 F]fluoride is discussed., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Scroggie, Perkins and Chalker.)

Inverse vulcanization provides dynamic and responsive materials made from elemental sulfur and unsaturated cross-linkers. These polymers have been used in a variety of applications such as energy storage, infrared optics, repairable materials, environmental remediation, and precision fertilizers. In spite of these advances, there is a need for methods to recycle and reprocess these polymers. In this study, polymers prepared by inverse vulcanization are shown to undergo reactive compression molding. In this process, the reactive interfaces of sulfur polymers are brought into contact by mechanical compression. Upon heating these molds at relatively low temperatures (≈100 °C), chemical bonding occurs at the polymer interfaces by S-S metathesis. This method of processing is distinct from previous studies on inverse vulcanization because the polymers examined in this study do not form a liquid phase when heated. Neither compression nor heating alone was sufficient to mold these polymers into new architectures, so this is a new concept in the manipulation of sulfur polymers. Additionally, high-level ab initio calculations revealed that the weakest S-S bond in organic polysulfides decreases linearly in strength from a sulfur rank of 2 to 4, but then remains constant at about 100 kJ mol -1 for higher sulfur rank. This is critical information in engineering these polymers for S-S metathesis. Guided by this insight, polymer repair, recycling, and repurposing into new composites was demonstrated., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Sulfur is an underused by-product of the petrochemicals industry. Recent research into inverse vulcanization has shown how this excess sulfur can be transformed into functional polymers, by stabilization with organic crosslinkers. For these interesting new materials to realize their potential for applications, more understanding and control of their physical properties is needed. Here we report four new terpolymers prepared from sulfur and two distinct alkene monomers that can be predictively tuned in glass transition, molecular weight, solubility, mechanical properties, and color., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Mercury-dependent artisanal and small-scale gold mining (ASGM) is the largest source of mercury pollution on Earth. In this practice, elemental mercury is used to extract gold from ore as an amalgam. The amalgam is typically isolated by hand and then heated-often with a torch or over a stove-to distill the mercury and isolate the gold. Mercury release from tailings and vaporized mercury exceed 1000 tonnes each year from ASGM. The health effects on the miners are dire, with inhaled mercury leading to neurological damage and other health issues. The communities near these mines are also affected due to mercury contamination of water and soil and subsequent accumulation in food staples, such as fish-a major source of dietary protein in many ASGM regions. The risks to children are also substantial, with mercury emissions from ASGM resulting in both physical and mental disabilities and compromised development. Between 10 and 19 million people use mercury to mine for gold in more than 70 countries, making mercury pollution from ASGM a global issue. With the Minamata Convention on Mercury entering force this year, there is political motivation to help overcome the problem of mercury in ASGM. In this effort, chemists can play a central role. Here, the problem of mercury in ASGM is reviewed with a discussion on how the chemistry community can contribute solutions. Introducing portable and low-cost mercury sensors, inexpensive and scalable remediation technologies, novel methods to prevent mercury uptake in fish and food crops, and efficient and easy-to-use mercury-free mining techniques are all ways in which the chemistry community can help. To meet these challenges, it is critical that new technologies or techniques are low-cost and adaptable to the remote and under-resourced areas in which ASGM is most common. The problem of mercury pollution in ASGM is inherently a chemistry problem. We therefore encourage the chemistry community to consider and address this issue that affects the health of millions of people., (© 2018 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Site-selective chemical conjugation of synthetic molecules to proteins expands their functional and therapeutic capacity. Current protein modification methods, based on synthetic and biochemical technologies, can achieve site selectivity, but these techniques often require extensive sequence engineering or are restricted to the N- or C-terminus. Here we show the computer-assisted design of sulfonyl acrylate reagents for the modification of a single lysine residue on native protein sequences. This feature of the designed sulfonyl acrylates, together with the innate and subtle reactivity differences conferred by the unique local microenvironment surrounding each lysine, contribute to the observed regioselectivity of the reaction. Moreover, this site selectivity was predicted computationally, where the lysine with the lowest p K a was the kinetically favored residue at slightly basic pH. Chemoselectivity was also observed as the reagent reacted preferentially at lysine, even in those cases when other nucleophilic residues such as cysteine were present. The reaction is fast and proceeds using a single molar equivalent of the sulfonyl acrylate reagent under biocompatible conditions (37 °C, pH 8.0). This technology was demonstrated by the quantitative and irreversible modification of five different proteins including the clinically used therapeutic antibody Trastuzumab without prior sequence engineering. Importantly, their native secondary structure and functionality is retained after the modification. This regioselective lysine modification method allows for further bioconjugation through aza-Michael addition to the acrylate electrophile that is generated by spontaneous elimination of methanesulfinic acid upon lysine labeling. We showed that a protein-antibody conjugate bearing a site-specifically installed fluorophore at lysine could be used for selective imaging of apoptotic cells and detection of Her2+ cells, respectively. This simple, robust method does not require genetic engineering and may be generally used for accessing diverse, well-defined protein conjugates for basic biology and therapeutic studies.

Mercury pollution threatens the environment and human health across the globe. This neurotoxic substance is encountered in artisanal gold mining, coal combustion, oil and gas refining, waste incineration, chloralkali plant operation, metallurgy, and areas of agriculture in which mercury-rich fungicides are used. Thousands of tonnes of mercury are emitted annually through these activities. With the Minamata Convention on Mercury entering force this year, increasing regulation of mercury pollution is imminent. It is therefore critical to provide inexpensive and scalable mercury sorbents. The research herein addresses this need by introducing low-cost mercury sorbents made solely from sulfur and unsaturated cooking oils. A porous version of the polymer was prepared by simply synthesising the polymer in the presence of a sodium chloride porogen. The resulting material is a rubber that captures liquid mercury metal, mercury vapour, inorganic mercury bound to organic matter, and highly toxic alkylmercury compounds. Mercury removal from air, water and soil was demonstrated. Because sulfur is a by-product of petroleum refining and spent cooking oils from the food industry are suitable starting materials, these mercury-capturing polymers can be synthesised entirely from waste and supplied on multi-kilogram scales. This study is therefore an advance in waste valorisation and environmental chemistry., (© 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

A polysulfide material was synthesized by the direct reaction of sulfur and d-limonene, by-products of the petroleum and citrus industries, respectively. The resulting material was processed into functional coatings or molded into solid devices for the removal of palladium and mercury salts from water and soil. The binding of mercury(II) to the sulfur-limonene polysulfide resulted in a color change. These properties motivate application in next-generation environmental remediation and mercury sensing., (© 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Thin film flow chemistry using a vortex fluidic device (VFD) is effective in the scalable acylation of amines under shear, with the yields of the amides dramatically enhanced relative to traditional batch techniques. The optimized monophasic flow conditions are effective in ≤80 seconds at room temperature, enabling access to structurally diverse amides, functionalized amino acids and substituted ureas on multigram scales. Amide synthesis under flow was also extended to a total synthesis of local anesthetic lidocaine, with sequential reactions carried out in two serially linked VFD units. The synthesis could also be executed in a single VFD, in which the tandem reactions involve reagent delivery at different positions along the rapidly rotating tube with in situ solvent replacement, as a molecular assembly line process. This further highlights the versatility of the VFD in organic synthesis, as does the finding of a remarkably efficient debenzylation of p-methoxybenzyl amines., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A highly practical synthesis of enantiopure (-)-α-kainic acid is accomplished in 37% overall yield, using 13 linear steps and a minimum of chromatographic separations via an unprecedented TMSCl-promoted palladium-catalyzed zinc-ene cyclization of an allyl acetate.

The ability to alter protein structure by site-directed mutagenesis has revolutionized biochemical research. Controlled mutations at the DNA level, before protein translation, are now routine. These techniques allow specific, high fidelity interconversion largely between 20 natural, proteinogenic amino acids. Nonetheless, there is a need to incorporate other amino acids, both natural and unnatural, that are not accessible using standard site-directed mutagenesis and expression systems. Post-translational chemistry offers access to these side chains. Nearly half a century ago, the idea of a 'chemical mutation' was proposed and the interconversion between amino acid side chains was demonstrated on select proteins. In these isolated examples, a powerful proof-of-concept was demonstrated. Here, we revive the idea of chemical mutagenesis and discuss the prospect of its general application in protein science. In particular, we consider amino acids that are chemical precursors to a functional set of other side chains. Among these, dehydroalanine has much potential. There are multiple methods available for dehydroalanine incorporation into proteins and this residue is an acceptor for a variety of nucleophiles. When used in conjunction with standard genetic techniques, chemical mutagenesis may allow access to natural, modified, and unnatural amino residues on translated, folded proteins., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Chemical modification of proteins is a rapidly expanding area in chemical biology. Selective installation of biochemical probes has led to a better understanding of natural protein modification and macromolecular function. In other cases such chemical alterations have changed the protein function entirely. Additionally, tethering therapeutic cargo to proteins has proven invaluable in campaigns against disease. For controlled, selective access to such modified proteins, a unique chemical handle is required. Cysteine, with its unique reactivity, has long been used for such modifications. Cysteine has enjoyed widespread use in selective protein modification, yet new applications and even new reactions continue to emerge. This Focus Review highlights the enduring utility of cysteine in protein modification with special focus on recent innovations in chemistry and biology associated with such modifications.

Two concise, high-yielding syntheses of enantioenriched (-)-kainic acid are presented. Both routes feature a Pd-catalyzed Zn-ene cyclization that proceeds with complete diastereoselectivity. The key step can be carried out on a multigram scale, and the overall yields are among the highest to date for this marine alkaloid.