Search

Prosthetic implants are widely used in dentistry and orthopedics and, as a result, infections can occur which cause their removal. Therefore, it is essential to propose methods of eradicating the bacteria that remain on the prosthesis during treatment. For this purpose, it is necessary to develop surfaces whose antibacterial activity can be controlled. Herein, we designed innovative and smart phosphonium self-assembled monolayer (SAM) interfaces that can be electrically activated on demand for controlling bacterial contaminations on solid surfaces. Upon electroactivation with a low potential (0.2 V for 60 min., conditions determined through a DOE), a successful stamping out of Gram-positive and Gram-negative bacterial strains was obtained with SAM-modified titanium surfaces, effectively killing 95% of Staphylococcus aureus and 90% Klebsiellapneumoniae. More importantly, no toxicity towards eukaryotic cells was observed which further enhances the biocompatible character of these novel surfaces for further implementation. [ABSTRACT FROM AUTHOR]

Purpose: To compare teeth prepared to receive a metallic versus a metal-ceramic crown with respect to (1) in vitro dentin permeability before and after using a desensitizing agent and (2) pulpal eugenol concentration after sealing a temporary crown with a zinc oxide-eugenol based cement. Materials and Methods: The roots of 20 human mandibular molars were separated and the crowns were prepared to receive a metallic crown. The hydraulic conductance was recorded before and after using Protect dentin desensitizer. The crowns were then further reduced to receive a metal-ceramic crown and the hydraulic conductance was recorded under the same conditions, on deeper dentin, before and after using the desensitizing agent. Twenty additional teeth were prepared: 10 to receive a metallic crown and 10 teeth to receive a metal-ceramic crown. A tube filled with 1 mL phosphate buffered saline (PBS) was sealed to the cementoenamel junction. A temporary crown was sealed onto the preparation with Temp Bond. The amount of eugeno] that diffused across dentin into PBS was spectrofluorimetrically measured at Day 1 and Day 7. The crown preparations were vertically sectioned and the dentin remaining thickness was recorded. Results: The hydraulic conductance of teeth prepared for a metal-ceramic crown was twice as high as teeth prepared for a metallic crown (P<0.001). The desensitizing agent reduced the hydraulic conductance in both groups (P< 0.001). The two groups showed the same hydraulic conductance after using Protect (ns). No significant difference was found in the amount of eugenol diffusion between the two groups of teeth although eugenol diffusion decreased with time (P< 001). No correlation was found between eugenol diffusion and remaining dentin thickness. [ABSTRACT FROM AUTHOR]

Purpose: To compare in vitro the efficacy of five resin-based desensitizing agents at reducing human dentin permeability and to compare their cytotoxicity. The tested hypothesis was that their different curing techniques cause variations in efficiency and cytotoxicity. Materials and Methods: Dentin slices (0.5 ± 0.05 mm thick) were prepared from human third molars (10 per group) and their hydraulic conductance was recorded before and after application of one of the desensitizing agents with a Fludec device. Six desensitizing agents were studied: one light curing agent (Seal and Protect); one self-curing agent (Pain Free); three resin-based agents without any polymerization initiator (Health-Dent, Gluma Desensirizer, Isodan); one oxalate-based agent served as a control (Protect). A MTT assay on L 929 fibroblasts was performed to measure the cytotoxicity of the six desensitizing agents applied onto additional dentin slices (10 per group). Results: All the desensitizing agents resulted in a large decrease in dentin permeability. The best results were obtained with Gluma Desensitizer, Isodan, Pain Free and Protect. A statistically significant difference was found among the materials (P= 0.001). All the materials were non-cytotoxic. Cell viability ranged from 88% for Seal and Protect to 100% for Isodan. No difference was found among their cytotoxicity. [ABSTRACT FROM AUTHOR]

Purpose: To investigate pulpal injury by measuring odontoblast numbers, and pulp dentin repair activity by measuring reactionary dentin area, in relation to the remaining dentin thickness (RDT) of cavity preparations in 217 human teeth. Materials and Methods: Cavities were restored with adhesive bonded composite, resin-modified glass-ionomer cement, zinc oxide-eugenol or calcium hydroxide materials. The teeth were extracted for orthodontic reasons between 20-381 days post-operatively, and odontoblast numbers and reactionary dentin area were analyzed histomorphometrically, and statistically using ANOVA. Results: Reactionary dentin deposition was observed beneath cavities with a RDT above 0.5 mm as well as beneath cavities with a RDT below 0.25 mm; however maximal reactionary dentin appeared to be beneath cavities with an a RDT between 0.5-0.25 mm (P= 0.0001). The area of reactionary repair was also influenced by the choice of restoration material (P= 0.0385) bam greatest to least; calcium hydroxide, composite, resin-modified glass-ionomer cement and zinc oxide-eugenol. Odontoblast numbers were maintained beneath cavities with a RDT above 0.25 mm, cavities placed closer to the pulp appeared to injure underlying odontoblasts, reducing their numbers (P= 0.0001). The choice of cavity restoration material also influenced the survival of underlying odontoblasts (P= 0.0061). [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the influence of dentin etching with phosphoric acid on hydrogen peroxide diffusion through human dentin in internal bleaching. Methods: 46 human premolars were extracted for orthodontic reasons from adolescents. The teeth were endodontically treated and a flat defect was created at the enamel-cementum junction. The teeth were divided into two groups: the access cavity was etched for 30 seconds with 35% H3P04 in the first group and left intact in the second group. The teeth were filled with 20μL of 35% hydrogen peroxide gel. The receiving medium on the other side was renewed at Day 1, Day 2 and Day 7 to quantify the diffusing hydrogen peroxide. An analysis of variance was performed to compare the diffusion between the two groups. Results: This work demonstrated a higher hydrogen peroxide diffusion when the access cavity was etched (P< 0.01). [ABSTRACT FROM AUTHOR]

Abstract: Objectives: A Ca3SiO5-based cement has been developed to circumvent the shortcomings of traditional filling materials. The purpose of this work was to evaluate its genotoxicity, cytotoxicity and effects on the target cells’ specific functions. Methods: Ames’ test was applied on four Salmonella typhimurium strains. The micronuclei test was studied on human lymphocytes. The cytotoxicity (MTT test), the Comet assay and the effects on the specific functions by immunohistochemistry were performed on human pulp fibroblasts. Results: Ames’ test did not show any evidence of mutagenicity. The incidence of lymphocytes with micronuclei and the percentage of tail DNA in the Comet assay were similar to the negative control. The percentage of cell mortality with the new cement as performed with the MTT test was similar to that of biocompatible materials such as mineral trioxide aggregate (MTA) and was less than that obtained with Dycal. The new material does not affect the target cells’ specific functions such as mineralization, as well as expression of collagen I, dentin sialoprotein and Nestin. Significance: The new cement is biocompatible and does not affect the specific functions of target cells. It can be used safely in the clinic as a single bulk restorative material without any conditioning treatment. It can be used as a potential alternative to traditionally used posterior restorative materials. [Copyright &y& Elsevier]

Tissue-engineered oral epithelium (ΤΕΟΕ) was developed after comparing various culture conditions, including submerged- and air-liquid interface (ALI) human cell expansion options. Barrier formation was evaluated via transepithelial electrical resistance (TEER) and calcein permeation via spectrofluorometry. TEOE was further assessed for long-term viability via live/dead staining and development of intercellular connections via transmission electron microscopy (TEM). Tissue architecture was evaluated via histochemistry and the expression of pancytokeratin (pCK) via immunohistochemistry (IHC). The effect of two commonly used dental resinous monomers on TEOE was evaluated for alterations in cell viability and barrier permeability. ALI/keratinocyte growth factor-supplemented (ALI-KGS) culture conditions led to the formation of an 8-20-layer thick, intercellularly-connected epithelial barrier. TEER values of ALI-KGS-developed TEOE decreased compared to all other tested conditions, and the established epithelium intensively expressed pCK. Exposure to dental monomers affected the integrity and architecture of TEOE, and induced cellular vacuolation, implicating hydropic degeneration. Despite structural modifications, the permeability of TEOE was not substantially affected after exposure to the monomers. In conclusion, the biological properties of the TEOE mimicking the physiological functional conditions and its value as biocompatibility assessment tool for dental materials were characterized.

Introduction: Questions exist regarding the efficacy of resin-containing materials such as TheraCal directly applied on the pulp. This study sought to investigate the clinical efficacy of TheraCal as compared with Biodentine and ProRoot mineral trioxide aggregate (MTA) for partial pulpotomy., Methods: In this clinical trial, partial pulpotomy was performed for 27 sound human maxillary and mandibular third molars scheduled for extraction. The teeth were randomly divided into 3 groups (n = 9) and underwent partial pulpotomy with TheraCal, Biodentine, and ProRoot MTA. The teeth were then restored with glass ionomer cement. Clinical and electric pulp tests were performed after 1 and 8 weeks. The teeth were radiographed and extracted at 8 weeks. Histologic sections were prepared and analyzed for pulp inflammation and dentinal bridge formation. Data were analyzed by using one-way analysis of variance., Results: Clinical examination showed no sensitivity to heat, cold, or palpation in ProRoot MTA and Biodentine groups. Two patients in TheraCal group (20%) reported significant pain at 1 week. Periapical radiographs showed no periapical pathology, and electric pulp test revealed a normal pulp response with no hypersensitivity. Inflammation was absent with all materials at 8 weeks. Normal pulp organization was seen in 33.33% of the teeth in ProRoot MTA, 11.11% in TheraCal, and 66.67% in Biodentine group (P = .06). Biodentine group showed complete dentinal bridge formation in all teeth, whereas this rate was 11% and 56% in TheraCal and ProRoot MTA groups, respectively (P = .001)., Conclusions: Overall, Biodentine and MTA performed better than TheraCal when used as partial pulpotomy agent and presented the best clinical outcomes., (Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Fibroblasts represent the most abundant population within the dental pulp. Although other cell types such as odontoblasts and stem cells have been extensively investigated, very little attention was given to the fibroblasts, which have major roles in regulating the pulp biology and function under normal and pathologic conditions. Indeed, although pulp fibroblasts control the pulp vascularization and innervation under physiological conditions, these cells synthesize growth factors that enhance dentin-pulp regeneration, vascularization, and innervation. Pulp fibroblasts also represent a unique cell population because they are the only non-hepatic and non-immune cell type capable of synthesizing all complement proteins leading to production of biologically active fragments such as C3a, C5a, and membrane attack complex, which play major roles in the pulp regeneration processes. C3a fragment is involved in inducing the proliferation of both stem cells and pulp fibroblasts. It is also involved in stem cell mobilization and pulp fibroblast recruitment. C5a guides nerve sprouting and stem cell recruitment. The membrane attack complex fixes on cariogenic bacteria walls, leading to their direct destruction. These data demonstrate the central role played by pulp fibroblasts in regulating the dentin-pulp tissue by directly destroying cariogenic bacteria and by releasing bioactive fragments involved in nerve sprouting and stem cell recruitment and pulp regeneration. Taken together, this shows that targeting pulp fibroblasts represents a realistic strategy to induce complete dentin-pulp regeneration., (Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Purpose: To assess the influence of in-office whitening gel pH on whitening efficiency., Methods: Hydrogen peroxide diffusion and color changes on bovine teeth were assessed. Three gels with close hydrogen peroxide concentrations but with various pH levels were tested: Zoom 2 (Discus Dental), Opalescence Endo and Opalescence Boost (Ultradent). The pH levels were respectively: 3.0, 5.0 and 7.0. Thirty enamel slices and tooth crowns were used for both studies (n = 10 per group per study). Hydrogen peroxide diffusion through the enamel slices and the tooth crowns was spectrophotometrically recorded every 10 minutes for 1 hour to calculate the diffusion coefficients. Color changes were spectrophotometrically recorded every 10 minutes for 1 hour and quantified in term of CIE-Lab., Results: The hydrogen peroxide diffusion coefficient through enamel ranged from 5.12 +/- 0.82 x 10(-9) cm2 s(-1) for pH 3 to 5.19 +/- 0.92 x 10(-9) cm2 S(-1) for pH 7. Through tooth crowns it ranged from 4.80 +/- 1.75 x 10(-10) cm2 s(-1) for pH 5 to 4.85 +/- 1.82 x 10(-10) cm2 s(-1) for pH 3. After 1 hour, the deltaE varied from 5.6 +/- 4.0 for pH 7 to 7.0 +/- 5.0 for pH 3 on enamel slices and from 3.9 +/- 2.5 for pH 5 to 4.9 +/- 3.5 for pH 7 on tooth crowns. There was no statistically significant difference between groups for both parameters.

The purpose of this work is to produce microspheres loaded with transforming growth factor beta1 TGFbeta1 and basic fibroblast growth factor FGF-2; to ensure the protein protection from degradation during the encapsulation and storage steps, to evaluate the release rate and the microspheres toxicity. The water in oil in water double emulsion technique was adapted to avoid the protein degradation during the encapsulation. The obtained microspheres were deeply characterized to evaluate their size, morphology, toxicity, the way of degradation, the protein stability and release rate. The microspheres were found to be biocompatible and the encapsulation efficiency was about 35%. It was observed that the obtained microspheres increase the shelf life of the growth factors. The diffusion coefficient was quantified using Fick's law of diffusion that was combined to an empirical equation representing the decrease in the protein stability. Such modelling helped to give indirect information about the microspheres morphology and drug distribution within the microspheres. The main conclusion consists of the formation of a higher compact polymer matrix when smaller particles are produced, which has different distinct effects: the encapsulation efficiency and the stability of the encapsulated growth factor are enhanced while both the growth factor diffusion and the polymer degradation rates decrease.

Odontoblasts are highly differentiated postmitotic cells, which under pathological conditions such as carious lesions and dental injuries may degenerate and be replaced by other pulp cells. A recent work showed that this physiological event can be reproduced in an in vitro assay system. The purpose of the present study was to evaluate the effects of resinous monomers on odontoblast differentiation in vitro. Pulp cores from extracted human third molars were cultured with beta-glycerophosphate (2 mM) and used to evaluate the effects of TEGDMA, HEMA, UDMA, and Bis-GMA on the differentiation of pulp fibroblasts into odontoblasts. The effect of the monomers was studied by evaluating the expression of several odontoblast specific genes. In the absence of monomers, mineral nodule formation was observed. Pulp cells contributing to the nodule formation synthesized type I collagen, osteonectin, and dentin sialoprotein (DSP). In addition, Fourier transform infrared microspectroscopy showed that the mineral and organic composition of the nodules were characteristic of dentin. When the monomers were added at nontoxic concentrations, the effects of HEMA and Bis-GMA were more evident than that of TEGDMA and UDMA on collagen 1, osteonectin, and DSP expression. However, all monomers significantly decreased DSP expression and completely inhibited the mineral nodule formation., (Copyright 2002 Wiley Periodicals, Inc. J Biomed Mater Res (Appl Biomater) 63: 418-423, 2002)