Search

The Frascati Tokamak Upgrade (FTU) is a high field and high density device which allows one to study confinement and transport at plasma parameters generally not accessible to other tokamaks and is relevant to next generation experiments (ITER). In this paper we study the effect of different density, temperature and q profiles on confinement and transport in various types of plasmas including ohmic, externally heated and pellet-fuelled discharges. Peaking of the electron density profile in pellet-fuelled discharges has been found to enhance the energy confinement time on FTU to values as high as 120 ms at densities of the order of those expected in ITER. Experiments designed to further improve confinement by injecting pellets at higher densities show the existence of a second threshold for saturation of confinement when the local electron heat conductivity corresponds to the same order of the local ion neoclassical conductivity in the region of maximum temperature gradient. Reflectometry measurements show turbulence suppression in pellet-injected discharges (as predicted by microstability analysis) and give insights to the change in turbulence in electron internal transport barrier plasmas. Finally, particle transport has been studied in experiments with full LH current drive.

Fourier spectral or pseudo-spectral methods are usually extremely efficient for periodic problems. However this efficiency is lost if the solutions have zones of rapid variations or internal layers. For these cases, a large number of Fourier modes are required and this makes the Fourier method unpractical in many cases. This work investigates the use of mapped Fourier method as a way to circumvent this problem. Mapped Fourier method uses instead of the usual Fourier interpolant the composition of the Fourier interpolant with a mapping in such a way that in the computational space, the functions to represent are not stiff. This work gives some examples of the usefulness of this method and apply it to a simple model of pellet injection in tokamaks as an example of its potential interest for complex multi dimensional problem.; Les méthodes spectrales ou pseudo-spectrales de Fourier sont habituellement extrèmement efficaces pour les problèmes périodiques. Cette efficacité est cependant perdue lorsque les solutions ont des zones localisées de variations rapides ou des couches internes. Dans ces cas, un grand nombre de modes de Fourier doit {ê}tre utilisé pour représenter la solution et les méthodes de Fourier deviennent inutilisables. Ce travail étudie l'utilisation des méthodes de Fourier transformées comme moyen de régler ce problème. Les méthodes de Fourier transformées utilisent à la place del'interpolant de Fourier, la composition de cet interpolant avec un changement de variables construit pour que dans l'espace de calcul, les fonctions à représenter n'aient pas dezones à variations rapides. Ce travail donne quelques exemples de l'utilité de cette méthode et l'applique à un modèle simple d'injection de glaçons dans les tokamaks comme exemple de son intéret potentiel pour des problèmes complexes multidimensionnels.

A high poloidal beta, βp, was achieved using pulsed poloidal current drive (PPCD) in a toroidal pinch experiment-RX (TPE-RX). The plasma electron density and temperature increased, hence improving βp from 5 to 30% during PPCD. βp is almost equal to the total beta in the reversed-field pinch (RFP). D-alpha emission from recycling deuterium by the plasma-wall interaction decreased during the PPCD. An improved particle confinement time was indicated by a ten fold increase in the ratio of the total number of particles to the D-alpha emission. Single pellet injection into the good particle confinement plasma, achieved by the PPCD, produced high density plasma with high beta values. The plasma electron density rapidly increased to triple that of standard plasma, and high density was maintained till the end of the PPCD period. The electron temperature was lower than that of PPCD without ice pellet injection, but βp remained almost the same because the plasma electron density was higher with pellet injection.

Since the 2012 IAEA-FEC Conference, FTU operations have been largely devoted to runaway electrons generation and control, to the exploitation of the 140GHz electron cyclotron (EC) system and to liquid metal limiter elements. Experiments on runaway electrons have shown that the measured threshold electric field for their generation is larger than predicted by collisional theory and can be justified considering synchrotron radiation losses. A new runaway electrons control algorithm was developed and tested in presence of a runaway current plateau, allowing to minimize the interactions with plasma facing components and safely shut down the discharges. The experimental sessions with 140GHz EC system have been mainly devoted to experiments on real-time control of magnetohydrodynamic (MHD) instabilities using the new EC launcher with fast steering capability. Experiments with central EC injection have shown the onset of 3/2 and 2/1 tearing modes, while EC assisted breakdown experiments have been focused on ITER start-up issues, exploring the polarization conversion at reflection from inner wall and the capability to assure plasma start-up even in presence of a large stray magnetic field. A new actively cooled lithium limiter has been installed and tested. The lithium limiter was inserted in the scrape-off layer, without any damage to the limiter surface. First elongated FTU plasmas with EC additional heating were obtained with the new cooled limiter. Density peaking and controlled MHD activity driven by neon injection were investigated at different plasma parameters. A full real-time algorithm for disruption prediction, based on MHD activity signals from Mirnov coils, was developed exploiting a large database of disruptions. Reciprocating Langmuir probes were used to measure the heat flux e-folding length in the scrape-off layer, with the plasma kept to lay on thea internal limiter to resemble the ITER start-up phase. New diagnostics were successfully installed and tested, as a diamond probe to detect Cherenkov radiation produced by fast electrons and a gamma camera for runaway electrons studies. Laser induced breakdown spectroscopy measurements were performed under vacuum and with toroidal magnetic field, so demonstrating their capability to provide useful information on the surface elemental composition and fuel retention in present and future tokamaks, such as ITER. © 2015 EURATOM.